;***************************************************************************
;*
;*                      TTTTTTTT   CCCCCC   MM   MM
;*                      T  TT  T  CC    CC  MMM MMM
;*                         TT     CC        MMMMMMM
;*                         TT     CC        MM M MM
;*                         TT     CC        MM   MM
;*                         TT     CC    CC  MM   MM
;*                         TT      CCCCCF   MM   MR
;*
;*
;*  Copyright (c) 1996 U.S.Robotics, Inc.
;*  All Rights Reserved
;*
;*  $Workfile:   software.dat  $
;*  $Revision:   1.47  $
;*  $Date:   09 Sep 1998 14:30:14  $
;*  $Author:   Trooney  $
;*
;***************************************************************************/

; The software.dat file introduced in TCM 4.3 contains data necessary to 
; manage NACs based of Hardware IDs.

; The first section SOFTWARE_ID of the file contains an index of the software 
; Ids that are present in the chassis MIB.   This index is used to access the 
; software ID sections that follow.

; The last section of the file named NAC_DEFAULT_SDL_PREFIX will have default 
; SDL file prefix information discussed in Appendix D.   The file follows 
; the windows INI file format.

; The format for the items in the software ID section is
; Key(sequential number)=section name for the software type.

[SOFTWARE_ID]
0=Unknown_0
1=NetwMgt_1
2=DualT1_2
3=DualStandardModem_5
4=HSTModem_6
5=V32Modem_7
6=TokenRing_8
7=X25Gateway_9
8=DualStandardV32TerboMdEnt_10
9=V32TerboModem_11
10=V32TerboFaxModem_12
11=DualStandardV34Modem_13
12=V34Modem_14
13=V34FaxModem_15
14=SingleT1_16
15=EthernetGateway_17
16=TokenRingAccSrvr_19
17=EthernetAccSrvr_20
18=EnetFRIsdnNetservr_23
19=IsdnPriT1_24
20=TknRngIsdnNetserver_25
21=EnetNetserver_26
22=IsdnPriE1_27
23=NTServer_28
24=WGW_29
25=Quad-I-Modem_31
26=POWER_200
27=NOT_PRESENT_-1
28=DualE1_32
29=HDM24_33
30=RISC_NetServer_34
31=HDM30_35
32=CDMA_36
33=DASS2_37
34=CDMA1_38     
35=QuadCDMA_39
36=CabelRISCNS_40
37=NetwMgt_1000
38=T1NIC_1001
39=DualAnalogNIC_1002
40=RS232_1003
41=QuadAnalogNIC_1004
42=TRNNIC_1005
43=ST1NIC_1006
44=ETHNIC_1007
45=HDT1NIC_1008
46=DualAnaIntNIC_1009
47=X25NIC_1010
48=QANMNIC_1011
49=QAM_INT_NIC_1012
50=QANM_INT_NIC_1013
51=QSDLM_NIC_1014
52=QSDLNM_NIC_1015
53=QSDLM_INT_NIC_1016
54=QSDLNM_INT_NIC_1017
55=HSEV35_NIC_1018
56=HSE_NIC_1019
57=DHSV35_NIC_1020
58=LS35_NIC_1021
59=E1PRI_NIC_1022
60=E1PRI_SHORT_NIC_1023
61=LH_BELLCORE_NIC_1025
62=SH_BELLCORE_NIC_1026
63=SCSI2_NIC_1027
64=QuadAnalV1_NIC_1028
65=Dual10100Eth_NIC_1029
66=Single_10100Eth_NIC_1030
67=Clrch_T1_NIC_1031
68=Clrch_E1_NIC_1032
69=GPC_T1E1_NIC_1033
70=GPC_T1_NIC_1034
71=GPC_E1_NIC_1035
72=ULTRA_SCSI_KM_NIC_1037
73=HIPERNMC_46
74=NMC10100ETH_NIC_1039
75=CDMA2_50     
76=HiPerARC2_47     
77=HiPerTRAX_49
78=ITG_51     
79=HDME1R2_53     
80=416_TRAUX_NIC_1040
81=DUAL_V35_PCI_NIC_1041
82=ATM_DS1_NIC_1042
83=ATM_E1_NIC_1043
84=ATM_DS3_NIC_1044
85=ATM_E3_NIC_1045
86=ATM_STS3C_NIC_1046
87=ATM_OC3S_NIC_1047
88=ATM_OC3M_NIC_1048

;***************************************************************************
; Each software type section may have the following keys.
; SoftwareID // software ID
; config   // card/channel level configuration
; commands // card/channel level commands
; perf     // card/channel level performance
; fault    // card/channel level faults
; tests    // card/channel/subchannel level tests
; features // card/channel level feature upgrade
; autoresponse // card/channel level autoresponse
; card_dat // card level MIB objects file
; channel_dat // channel  level MIB objects file
; SameSoftwareType// SOFTWAREs that share DAT files.
;***************************************************************************

[Unknown_0]
softwareID = 0                  ; Software ID
commands = TRUE,FALSE           ; card/channel level commands
card_dat = unkwn.dat            ; card level MIB objects file
max_channels = 0

[NetwMgt_1]
softwareID = 1                  ; Software ID
config   = TRUE,FALSE           ; card/channel level configuration
commands = TRUE, FALSE          ; card/channel level commands
perf     = TRUE, FALSE          ; card/channel level performance
fault    = TRUE, FALSE          ; card/channel level faults
features = TRUE, FALSE          ; card/channel level feature upgrade
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = nmc.dat              ; card level MIB objects file
max_channels = 0


[DualT1_2]
softwareID = 2                  ; Software ID
config   = TRUE,TRUE            ; card/channel level configuration
commands = TRUE, TRUE           ; card/channel level commands
perf     = TRUE, TRUE           ; card/channel level performance
fault    = TRUE, TRUE           ; card/channel level faults
features = FALSE, FALSE         ; card/channel level feature upgrade
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = dt1.dat              ; card level MIB objects file
channel_dat = ds1.dat           ; channel  level MIB objects file
subchannel_dat  = ds0.dat       ; subchannel level MIB objects file
SameSoftwareType= 16         ; SOFTWAREs that share DAT files.
max_subchannels = 48
CardLabel = "T1", (-2,0)
max_channels = 2

[DualStandardModem_5]
softwareID = 5                  ; Software ID
config   = TRUE,TRUE           ;card/channel level configuration
commands = TRUE, TRUE           ;card/channel level commands
perf     = FALSE, TRUE          ;card/channel level performance
fault    = FALSE, TRUE          ; card/channel level faults
tests    = TRUE, TRUE, TRUE             ; card/channel level modem tests
features = FALSE, FALSE         ; card/channel level feature upgrade
autoresponse = TRUE, TRUE       ; card/channel level autoresponse
card_dat = mdmcard.dat          ; card level MIB objects file
channel_dat = mdmchan.dat       ; channel  level MIB objects file
subchannel_dat  =                       ; subchannel level MIB objects file
SameSoftwareType= 6,7,10,11,12,13,14,15,31,39  ;SOFTWAREs that share DAT files.

[HSTModem_6]
softwareID = 6                  ; Software ID
config   = TRUE,TRUE           ;card/channel level configuration
commands = TRUE, TRUE           ;card/channel level commands
perf     = FALSE, TRUE          ;card/channel level performance
fault    = FALSE, TRUE          ; card/channel level faults
tests    = TRUE, TRUE, TRUE             ; card/channel level modem tests
features = FALSE, FALSE         ; card/channel level feature upgrade
autoresponse = TRUE, TRUE       ; card/channel level autoresponse
card_dat = mdmcard.dat          ; card level MIB objects file
channel_dat     = mdmchan.dat   ; channel  level MIB objects file
SameSoftwareType= 5,7,10,11,12,13,14,15,31,39  ;SOFTWAREs that share DAT files.

[V32Modem_7]
softwareID = 7                  ; Software ID
config   = TRUE,TRUE           ;card/channel level configuration
commands = TRUE, TRUE           ;card/channel level commands
perf     = FALSE, TRUE          ;card/channel level performance
fault    = FALSE, TRUE          ; card/channel level faults
tests    = TRUE, TRUE, TRUE             ; card/channel level modem tests
features = FALSE, FALSE         ; card/channel level feature upgrade
autoresponse = TRUE, TRUE       ; card/channel level autoresponse
card_dat = mdmcard.dat          ; card level MIB objects file
channel_dat     = mdmchan.dat   ; channel  level MIB objects file
SameSoftwareType= 5,6,10,11,12,13,14,15,31,39  ;SOFTWAREs that share DAT files.

[TokenRing_8]
softwareID = 8                  ; Software ID
commands = TRUE,FALSE           ; card/channel level commands
card_dat = unkwn.dat            ; card level MIB objects file
max_channels = 0

[X25Gateway_9]
softwareID = 9                  ; Software ID
config   = TRUE,TRUE            ; card/channel level configuration
commands = TRUE, FALSE          ; card/channel level commands
perf     = FALSE, TRUE          ; card/channel level performance
fault    = TRUE, TRUE           ; card/channel level faults
features = TRUE, FALSE          ; card/channel level feature upgrade
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = x25cd.dat            ; card level MIB objects file
channel_dat = x25.dat           ; channel  level MIB objects file
ext_manager	 = "X.25 PAD", "x25confg.exe U %IP %S %RWCS" ;
max_channels = 2

[DualStandardV32TerboMdEnt_10]
softwareID = 10                 ; Software ID
config   = TRUE,TRUE           ;card/channel level configuration
commands = TRUE, TRUE           ;card/channel level commands
perf     = FALSE, TRUE          ;card/channel level performance
fault    = FALSE, TRUE          ; card/channel level faults
tests    = TRUE, TRUE, TRUE             ; card/channel level modem tests
features = FALSE, FALSE         ; card/channel level feature upgrade
autoresponse = TRUE, TRUE       ; card/channel level autoresponse
card_dat = mdmcard.dat          ; card level MIB objects file
channel_dat     = mdmchan.dat   ; channel  level MIB objects file
SameSoftwareType= 5,6,7,11,12,13,14,15,31,39  ;SOFTWAREs that share DAT files.

[V32TerboModem_11]
softwareID = 11                 ; Software ID
config   = TRUE,TRUE           ;card/channel level configuration
commands = TRUE, TRUE           ;card/channel level commands
perf     = FALSE, TRUE          ;card/channel level performance
fault    = FALSE, TRUE          ; card/channel level faults
tests    = TRUE, TRUE, TRUE     ; card/channel level modem tests
features = FALSE, FALSE         ; card/channel level feature upgrade
autoresponse = TRUE, TRUE       ; card/channel level autoresponse
card_dat = mdmcard.dat          ; card level MIB objects file
channel_dat     = mdmchan.dat   ; channel  level MIB objects file
SameSoftwareType= 5,6,7,10,12,13,14,15,31,39  ;SOFTWAREs that share DAT files.

[V32TerboFaxModem_12]
softwareID = 12                 ; Software ID
config   = TRUE,TRUE           ;card/channel level configuration
commands = TRUE, TRUE           ;card/channel level commands
perf     = FALSE, TRUE          ;card/channel level performance
fault    = FALSE, TRUE          ; card/channel level faults
tests    = TRUE, TRUE, TRUE     ; card/channel level modem tests
features = FALSE, FALSE         ; card/channel level feature upgrade
autoresponse = TRUE, TRUE       ; card/channel level autoresponse
card_dat = mdmcard.dat          ; card level MIB objects file
channel_dat = mdmchan.dat          ; card level .dat file, channel range, ...
SameSoftwareType= 5,6,7,10,11,13,14,15,31,39  ;SOFTWAREs that share DAT files.

[DualStandardV34Modem_13]
softwareID = 13                 ; Software ID
config   = TRUE,TRUE           ;card/channel level configuration
commands = TRUE, TRUE           ;card/channel level commands
perf     = FALSE, TRUE          ;card/channel level performance
fault    = FALSE, TRUE          ; card/channel level faults
tests    = TRUE, TRUE, TRUE     ; card/channel level modem tests
features = FALSE, FALSE         ; card/channel level feature upgrade
autoresponse = TRUE, TRUE       ; card/channel level autoresponse
card_dat = mdmcard.dat          ; card level MIB objects file
channel_dat     = mdmchan.dat   ; channel  level MIB objects file
SameSoftwareType= 5,6,7,10,11,12,14,15,31,39  ;SOFTWAREs that share DAT files.

[V34Modem_14]
softwareID = 14                 ; Software ID
config   = TRUE,TRUE           ;card/channel level configuration
commands = TRUE, TRUE           ;card/channel level commands
perf     = FALSE, TRUE          ;card/channel level performance
fault    = FALSE, TRUE          ; card/channel level faults
tests    = TRUE, TRUE, TRUE     ; card/channel level modem tests
features = FALSE, FALSE         ; card/channel level feature upgrade
autoresponse = TRUE, TRUE       ; card/channel level autoresponse
card_dat = mdmcard.dat          ; card level MIB objects file
channel_dat     = mdmchan.dat   ; channel  level MIB objects file
SameSoftwareType= 5,6,7,10,11,12,13,15,31,39  ;SOFTWAREs that share DAT files.

[V34FaxModem_15]
softwareID = 15                 ; Software ID
config   = TRUE,TRUE           ;card/channel level configuration
commands = TRUE, TRUE           ;card/channel level commands
perf     = FALSE, TRUE          ;card/channel level performance
fault    = FALSE, TRUE          ; card/channel level faults
tests    = TRUE, TRUE, TRUE     ; card/channel level modem tests
features = FALSE, FALSE         ; card/channel level feature upgrade
autoresponse = TRUE, TRUE       ; card/channel level autoresponse
card_dat = mdmcard.dat          ; card level MIB objects file
channel_dat     = mdmchan.dat   ; channel  level MIB objects file
SameSoftwareType= 5,6,7,10,11,12,13,14,31,39  ;SOFTWAREs that share DAT files.

[SingleT1_16]
softwareID = 16                 ; Software ID
config   = TRUE,TRUE            ; card/channel level configuration
commands = TRUE, TRUE           ; card/channel level commands
perf     = TRUE, TRUE           ; card/channel level performance
fault    = TRUE, TRUE           ; card/channel level faults
features = FALSE, FALSE         ; card/channel level feature upgrade
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = dt1.dat              ; card level MIB objects file
channel_dat = ds1.dat           ; channel  level MIB objects file
subchannel_dat  = ds0.dat       ; subchannel level MIB objects file
SameSoftwareType= 2         ; SOFTWAREs that share DAT files.
max_subchannels = 24
max_channels = 1

[EthernetGateway_17]
softwareID = 17                 ; Software ID
commands = TRUE,FALSE           ; card/channel level commands
card_dat = unkwn.dat            ; card level MIB objects file
max_channels = 0

[TokenRingAccSrvr_19]
softwareID = 19                 ; Software ID
config   = TRUE, FALSE          ; card/channel level configuration
commands = TRUE, FALSE          ; card/channel level commands
perf     = TRUE, FALSE          ; card/channel level performance
fault    = TRUE, FALSE          ; card/channel level faults
autoresponse = TRUE, TRUE       ; card/channel level autoresponse
card_dat = netsrv.dat           ; card level MIB objects file
channel_dat = netsc.dat         ; channel  level MIB objects file
SameSoftwareType= 20    ; SOFTWAREs that share DAT files.
ext_manager = "NETserver", "netsrvr.exe" ; menu string, command line
max_channels = 1

[EthernetAccSrvr_20]
softwareID = 20                 ; Software ID
config   = TRUE, FALSE          ; card/channel level configuration
commands = TRUE, FALSE          ; card/channel level commands
perf     = TRUE, FALSE          ; card/channel level performance
fault    = TRUE, FALSE          ; card/channel level faults
autoresponse = TRUE, TRUE       ; card/channel level autoresponse
card_dat = netsrv.dat           ; card level MIB objects file
channel_dat = netsc.dat         ; channel  level MIB objects file
SameSoftwareType= 19    ; SOFTWAREs that share DAT files.
ext_manager = "NETserver", "netsrvr.exe" ; menu string, command line
max_channels = 1

[EnetFRIsdnNetservr_23]
softwareID = 23                 ; Software ID
config   = TRUE, FALSE          ; card/channel level configuration
commands = TRUE, FALSE          ; card/channel level commands
perf     = TRUE, FALSE          ; card/channel level performance
fault    = TRUE, FALSE          ; card/channel level faults
features = TRUE, FALSE          ; card/channel level feature upgrade
autoresponse = TRUE, TRUE       ; card/channel level autoresponse
card_dat = isdn.dat             ; card level MIB objects file
channel_dat = netsc.dat         ; channel  level MIB objects file
SameSoftwareType= 25       ; SOFTWAREs that share DAT files.
ext_manager = "NETserver", "netsrvr.exe" ; menu string, command line
max_channels = 1

[IsdnPriT1_24]
softwareID = 24                 ; Software ID
config   = TRUE,TRUE           ;card/channel level configuration
commands = TRUE, TRUE           ;card/channel level commands
perf     = TRUE, TRUE           ;card/channel level performance
fault    = TRUE, TRUE           ; card/channel level faults
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat =      idt1.dat        ; card level MIB objects file
channel_dat = ids1.dat          ; channel  level MIB objects file
subchannel_dat  = ids0.dat      ; subchannel level MIB objects file
SameSoftwareType= 27    ;SOFTWAREs that share DAT files.
max_subchannels = 48
CardLabel = "T1 PRI", (-2,0)
max_channels = 2


[TknRngIsdnNetserver_25]
softwareID = 25                 ; Software ID
config   = TRUE, FALSE          ; card/channel level configuration
commands = TRUE, FALSE          ; card/channel level commands
perf     = TRUE, FALSE          ; card/channel level performance
fault    = TRUE, FALSE          ; card/channel level faults
features = TRUE, FALSE          ; card/channel level feature upgrade
autoresponse = TRUE, TRUE       ; card/channel level autoresponse
card_dat = isdn.dat             ; card level MIB objects file
channel_dat = netsc.dat         ; channel  level MIB objects file
SameSoftwareType= 23       ; SOFTWAREs that share DAT files.
ext_manager = "NETserver", "netsrvr.exe " ; menu string, command line
max_channels = 1

[IsdnPriE1_27]
softwareID = 27                 ; Software ID
config   = TRUE,TRUE           ;card/channel level configuration
commands = TRUE, TRUE           ;card/channel level commands
perf     = TRUE, TRUE           ;card/channel level performance
fault    = TRUE, TRUE           ; card/channel level faults
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat =      idt1.dat        ; card level MIB objects file
channel_dat = ids1.dat          ; channel  level MIB objects file
subchannel_dat  = ids0.dat      ; subchannel level MIB objects file
SameSoftwareType= 24    ;SOFTWAREs that share DAT files.
max_subchannels = 64
CardLabel = "E1 PRI", (-2,0)
max_channels = 2

[NTServer_28]
softwareID = 28                 ; Software ID
config   = TRUE,FALSE           ;card/channel level configuration
commands = TRUE,FALSE           ; card/channel level commands
card_dat = edgsrvr.dat            ; card level MIB objects file
max_channels = 0

[WGW_29]
softwareID = 29                 ; Software ID
commands = TRUE, FALSE          ;card/channel level commands
card_dat = unkwn.dat            ; card level MIB objects file
max_channels = 0

[Quad-I-Modem_31]
softwareID = 31                 ; Software ID
config   = TRUE,TRUE           ;card/channel level configuration
commands = TRUE, TRUE           ;card/channel level commands
perf     = FALSE, TRUE          ;card/channel level performance
fault    = FALSE, TRUE          ; card/channel level faults
tests    = TRUE, TRUE, TRUE     ; card/channel level modem tests
features = FALSE, FALSE         ; card/channel level feature upgrade
autoresponse = TRUE, TRUE       ; card/channel level autoresponse
card_dat = mdmcard.dat          ; card level MIB objects file
channel_dat = mdmchan.dat          ; channel  level MIB objects file
SameSoftwareType= 5,6,7,10,11,12,13,14,39  ;SOFTWAREs that share DAT files.

                
[POWER_200]
softwareID = 200                ; Software ID
max_channels = 0


[NOT_PRESENT_-1]
softwareID = -1                ; Software ID


[DualE1_32]
softwareID = 32                 ; Software ID
config   = TRUE,TRUE            ; card/channel level configuration
commands = TRUE, TRUE           ; card/channel level commands
perf     = TRUE, TRUE           ; card/channel level performance
fault    = TRUE, TRUE           ; card/channel level faults
features = FALSE, FALSE         ; card/channel level feature upgrade
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = e1cd.dat              ; card level MIB objects file
channel_dat = e1ch.dat           ; channel  level MIB objects file
subchannel_dat  = e1sch.dat       ; subchannel level MIB objects file
SameSoftwareType= 24,27         ; SOFTWAREs that share DAT files.
max_subchannels = 64
CardLabel = "E1 CAS", (-2,0)
max_channels = 2

[HDM24_33]
softwareID = 33                 ; Software ID
config   = TRUE,TRUE           ;card/channel level configuration
commands = TRUE, TRUE           ;card/channel level commands
perf     = FALSE, TRUE          ;card/channel level performance
fault    = TRUE, TRUE          ; card/channel level faults
tests    = FALSE, FALSE, FALSE     ; card/channel level modem tests
features = FALSE, FALSE         ; card/channel level feature upgrade
autoresponse = TRUE, FALSE       ; card/channel level autoresponse
card_dat = hdmcard.dat          ; channel  level MIB objects file
group_dat = hdmgrp.dat
channel_dat = hdmchan.dat,1-24,hdmds1.dat,25          ; card level .dat file, channel range, ...
subchannel_dat = hdmds0.dat,25          ; channel  level MIB objects file
sdl_2  = TRUE
max_channels=24
max_subchannels=24
max_groups = 4
group_select = TRUE

;TRAX
[RISC_NetServer_34]
;softwareID = 5                 ; Software ID
softwareID = 34                 ; Software ID
config   = TRUE, FALSE          ; card/channel level configuration
commands = TRUE, FALSE          ; card/channel level commands
perf     = TRUE, FALSE          ; card/channel level performance
fault    = TRUE, FALSE          ; card/channel level faults
features = TRUE, FALSE          ; card/channel level feature upgrade
autoresponse = TRUE, TRUE       ; card/channel level autoresponse
card_dat = riscns.dat             ; card level MIB objects file
channel_dat = netsc.dat             ; card level MIB objects file
sdl_2  = TRUE
ext_manager      = "HiPer ARC", "hipermgr.exe -ip%IP -rw%RWCS@%S*1000" ; menu string, command line
ARM = TRUE
CardLabel = "HiPerARC", (-2,0)
max_channels = 1

[HDM30_35]
softwareID = 35                 ; Software ID
config   = TRUE,TRUE           ;card/channel level configuration
commands = TRUE, TRUE           ;card/channel level commands
perf     = FALSE, TRUE          ;card/channel level performance
fault    = TRUE, TRUE          ; card/channel level faults
tests    = FALSE, FALSE, FALSE     ; card/channel level modem tests
features = FALSE, FALSE         ; card/channel level feature upgrade
autoresponse = TRUE, FALSE       ; card/channel level autoresponse
card_dat = hdmcard.dat          ; channel  level MIB objects file
group_dat = hdmgrp.dat
channel_dat = hdmchan.dat,1-30,hdmds1.dat,31          ; card level .dat file, channel range, ...
subchannel_dat = hdmds0.dat,31          ; channel  level MIB objects file
sdl_2  = TRUE
max_channels = 30
max_subchannels = 30
max_groups = 4
group_select = TRUE

[CDMA_36]
softwareID = 36                 ; Software ID
config   = TRUE,FALSE           ;card/channel level configuration
commands = TRUE, FALSE           ;card/channel level commands
perf     = TRUE, FALSE          ;card/channel level performance
fault    = TRUE, FALSE          ; card/channel level faults
card_dat = iwfcdma.dat            ; card level MIB objects file
CardLabel = "CDMA GWY", (-2,0)
max_channels = 0
sdl_2 = TRUE
upload = TRUE                   ; file upload from the card is supported

[DASS2_37]
softwareID = 37                 ; Software ID
config   = TRUE,TRUE            ; card/channel level configuration
commands = TRUE, TRUE           ; card/channel level commands
perf     = TRUE, TRUE           ; card/channel level performance
fault    = TRUE, TRUE           ; card/channel level faults
features = FALSE, FALSE         ; card/channel level feature upgrade
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = ds2cd.dat              ; card level MIB objects file
channel_dat = ds2ch.dat           ; channel  level MIB objects file
subchannel_dat  = ds2sb.dat       ; subchannel level MIB objects file
max_subchannels = 64
CardLabel = "DASS/2", (-2,0)
max_channels = 2

[NetwMgt_1000]
softwareID = 1000                  ; Software ID
config   = TRUE,FALSE           ; card/channel level configuration
commands = TRUE, FALSE          ; card/channel level commands
perf     = TRUE, FALSE          ; card/channel level performance
fault    = TRUE, FALSE          ; card/channel level faults
features = TRUE, FALSE          ; card/channel level feature upgrade
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = nmc.dat              ; card level MIB objects file
max_channels = 0

[CDMA1_38]
softwareID = 38                ; Software ID
config   = TRUE,FALSE           ;card/channel level configuration
commands = TRUE, FALSE           ;card/channel level commands
perf     = TRUE, FALSE          ;card/channel level performance
fault    = TRUE, FALSE          ; card/channel level faults
card_dat = iwfcdma1.dat            ; card level MIB objects file
CardLabel = "CDMA GWY", (-2,0)
max_channels = 0
sdl_2 = TRUE
upload = TRUE                   ; file upload from the card is supported

[QuadCDMA_39]
softwareID = 39                 ; Software ID
config   = TRUE,TRUE           ;card/channel level configuration
commands = TRUE, TRUE           ;card/channel level commands
perf     = FALSE, TRUE          ;card/channel level performance
fault    = FALSE, TRUE          ; card/channel level faults
tests    = TRUE, TRUE, TRUE     ; card/channel level modem tests
features = FALSE, FALSE         ; card/channel level feature upgrade
autoresponse = TRUE, TRUE       ; card/channel level autoresponse
card_dat = mdmcard.dat          ; card level MIB objects file
channel_dat = mdmchan.dat          ; channel  level MIB objects file
SameSoftwareType= 5,6,7,10,11,12,13,14,31  ;SOFTWAREs that share DAT files.

[CabelRISCNS_40]
softwareID = 40                 ; Software ID
commands = TRUE,FALSE           ; card/channel level commands
card_dat = unkwn.dat            ; card level MIB objects file
CardLabel = "CBL HiPerARC", (-2,0)
sdl_2  = TRUE
max_channels = 0


[T1NIC_1001]
softwareID = 1001               ; software ID
commands = TRUE, FALSE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file

[DualAnalogNIC_1002]
softwareID = 1002               ; software ID
config   = FALSE,TRUE           ;card/channel level configuration
fault    = FALSE, TRUE          ; card/channel level faults
commands = TRUE, TRUE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file
channel_dat = anicchan.dat          ; channel  level MIB objects file
SameSoftwareType= 1004,1009,1012  ;SOFTWAREs that share DAT files.

[RS232_1003]
softwareID = 1003               ; software ID
commands = TRUE, FALSE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file

[QuadAnalogNIC_1004]
softwareID = 1004               ; software ID
config   = FALSE,TRUE           ;card/channel level configuration
fault    = FALSE, TRUE          ; card/channel level faults
commands = TRUE, TRUE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file
channel_dat = anicchan.dat          ; channel  level MIB objects file
SameSoftwareType= 1002,1009,1012  ;SOFTWAREs that share DAT files.

[TRNNIC_1005]
softwareID = 1005               ; software ID
commands = TRUE, FALSE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file

[ST1NIC_1006]
softwareID = 1006               ; software ID
commands = TRUE, FALSE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file

[ETHNIC_1007]
softwareID = 1007               ; software ID
commands = TRUE, FALSE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file

[HDT1NIC_1008]
softwareID = 1008               ; software ID
commands = TRUE, FALSE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file

[DualAnaIntNIC_1009]
softwareID = 1009               ; software ID
config   = FALSE,TRUE           ;card/channel level configuration
fault    = FALSE, TRUE          ; card/channel level faults
commands = TRUE, TRUE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file
channel_dat = anicchan.dat          ; channel  level MIB objects file
SameSoftwareType= 1002,1004,1012  ;SOFTWAREs that share DAT files.

[X25NIC_1010]
softwareID = 1010               ; software ID
commands = TRUE, FALSE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file

[QANMNIC_1011]
softwareID = 1011               ; software ID
commands = TRUE, FALSE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file
SameSoftwareType= 1004,1012,1013,1014,1015,1016,1017,1021  ;SOFTWAREs that share DAT files.

[QAM_INT_NIC_1012]
softwareID = 1012               ; software ID
config   = FALSE,TRUE           ;card/channel level configuration
fault    = FALSE, TRUE          ; card/channel level faults
commands = TRUE, TRUE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file
channel_dat = anicchan.dat          ; channel  level MIB objects file
SameSoftwareType= 1004,1011,1013,1014,1015,1016,1017,1021  ;SOFTWAREs that share DAT files.

[QANM_INT_NIC_1013]
softwareID = 1013               ; software ID
commands = TRUE, FALSE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file
SameSoftwareType= 1004,1011,1012,1014,1015,1016,1017,1021  ;SOFTWAREs that share DAT files.

[QSDLM_NIC_1014]
softwareID = 1014               ; software ID
commands = TRUE, FALSE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file
SameSoftwareType= 1004,1011,1012,1013,1015,1016,1017,1021  ;SOFTWAREs that share DAT files.

[QSDLNM_NIC_1015]
softwareID = 1015               ; software ID
commands = TRUE, FALSE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file
SameSoftwareType= 1004,1011,1012,1013,1014,1016,1017,1021  ;SOFTWAREs that share DAT files.

[QSDLM_INT_NIC_1016]
softwareID = 1016               ; software ID
commands = TRUE, FALSE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file
SameSoftwareType= 1004,1011,1012,1013,1014,1015,1017,1021  ;SOFTWAREs that share DAT files.

[QSDLNM_INT_NIC_1017]
softwareID = 1017               ; software ID
commands = TRUE, FALSE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file
SameSoftwareType= 1004,1011,1012,1013,1014,1015,1016,1021  ;SOFTWAREs that share DAT files.

[HSEV35_NIC_1018]
softwareID = 1018               ; software ID
commands = TRUE, FALSE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file

[HSE_NIC_1019]
softwareID = 1019               ; software ID
commands = TRUE, FALSE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file

[DHSV35_NIC_1020]
softwareID = 1020               ; software ID
commands = TRUE, FALSE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file

[LS35_NIC_1021]
softwareID = 1021               ; software ID
commands = TRUE, FALSE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file
SameSoftwareType= 1004,1011,1012,1013,1014,1015,1016,1017  ;SOFTWAREs that share DAT files.

[E1PRI_SHORT_NIC_1023]
softwareID = 1023               ; software ID
commands = TRUE, FALSE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file

[LH_BELLCORE_NIC_1025]
softwareID = 1025               ; software ID
commands = TRUE, FALSE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file

[SH_BELLCORE_NIC_1026]
softwareID = 1026               ; software ID
commands = TRUE, FALSE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file

[SCSI2_NIC_1027]
softwareID = 1027               ; software ID
commands = TRUE, FALSE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file

[QuadAnalV1_NIC_1028]
softwareID = 1028               ; software ID
config   = FALSE,TRUE           ;card/channel level configuration
fault    = FALSE, TRUE          ; card/channel level faults
commands = TRUE, TRUE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file
channel_dat = anicchan.dat          ; channel  level MIB objects file
SameSoftwareType= 1004,1011,1012,1013,1014,1015,1016,1017,1021  ;SOFTWAREs that share DAT files.

[Dual10100Eth_NIC_1029]
softwareID = 1029               ; software ID
commands = TRUE, FALSE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file

[Single_10100Eth_NIC_1030]
softwareID = 1030               ; software ID
commands = TRUE, FALSE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file

[Clrch_T1_NIC_1031]
softwareID = 1031               ; software ID
commands = TRUE, FALSE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file

[Clrch_E1_NIC_1032]
softwareID = 1032               ; software ID
commands = TRUE, FALSE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file

[GPC_T1E1_NIC_1033]
softwareID = 1033               ; software ID
commands = TRUE, FALSE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file

[GPC_T1_NIC_1034]
softwareID = 1034               ; software ID
commands = TRUE, FALSE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file

[GPC_E1_NIC_1035]
softwareID = 1035               ; software ID
commands = TRUE, FALSE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file

[ULTRA_SCSI_KM_NIC_1037]
softwareID = 1037               ; software ID
commands = TRUE, FALSE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file

[HIPERNMC_46]
softwareID = 46                  ; Software ID
config   = TRUE,FALSE           ; card/channel level configuration
commands = TRUE, FALSE          ; card/channel level commands
perf     = TRUE, FALSE          ; card/channel level performance
fault    = TRUE, FALSE          ; card/channel level faults
features = TRUE, FALSE          ; card/channel level feature upgrade
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = nmc.dat              ; card level MIB objects file
max_channels = 0
sdl_2 = TRUE

[NMC10100ETH_NIC_1039]
softwareID = 1039               ; software ID
commands = TRUE, FALSE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file

[416_TRAUX_NIC_1040]
softwareID = 1040               ; software ID
commands = TRUE, FALSE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file

[DUAL_V35_PCI_NIC_1041]
softwareID = 1041               ; software ID
commands = TRUE, FALSE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file

[ATM_DS1_NIC_1042]
softwareID = 1042               ; software ID
commands = TRUE, FALSE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file

[ATM_E1_NIC_1043]
softwareID = 1043               ; software ID
commands = TRUE, FALSE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file

[ATM_DS3_NIC_1044]
softwareID = 1044               ; software ID
commands = TRUE, FALSE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file

[ATM_E3_NIC_1045]
softwareID = 1045               ; software ID
commands = TRUE, FALSE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file

[ATM_STS3C_NIC_1046]
softwareID = 1046               ; software ID
commands = TRUE, FALSE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file

[ATM_OC3S_NIC_1047]
softwareID = 1047               ; software ID
commands = TRUE, FALSE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file

[ATM_OC3M_NIC_1048]
softwareID = 1048               ; software ID
commands = TRUE, FALSE           ; card/channel level commands
autoresponse = TRUE, FALSE      ; card/channel level autoresponse
card_dat = aniccard.dat         ; card level MIB objects file

[CDMA2_50]
softwareID = 50                ; Software ID
config   = TRUE,FALSE           ;card/channel level configuration
commands = TRUE, FALSE           ;card/channel level commands
perf     = TRUE, FALSE          ;card/channel level performance
fault    = TRUE, FALSE          ; card/channel level faults
card_dat = iwfcdma2.dat            ; card level MIB objects file
CardLabel = "CDMA GWY", (-2,0)
max_channels = 0
sdl_2 = TRUE
upload = TRUE                   ; file upload from the card is supported

[HiPerARC2_47]
softwareID = 47                 ; Software ID
config   = TRUE, FALSE          ; card/channel level configuration
commands = TRUE, FALSE          ; card/channel level commands
perf     = TRUE, FALSE          ; card/channel level performance
fault    = TRUE, FALSE          ; card/channel level faults
features = TRUE, FALSE          ; card/channel level feature upgrade
autoresponse = TRUE, TRUE       ; card/channel level autoresponse
card_dat = riscns.dat             ; card level MIB objects file
channel_dat = netsc.dat             ; card level MIB objects file
sdl_2  = TRUE
;ext_manager      = "HiPer ARC", "hipermgr.exe %IP %RWCS@%S*1000" ; menu string, command line
ext_manager      = "HiPer ARC", "hipermgr.exe -ip%IP -rw%RWCS@%S*1000" ; menu string, command line
ARM = TRUE
CardLabel = "HiPerARC", (-2,0)
max_channels = 1

[HiPerTRAX_49]
softwareID = 49                 ; Software ID
;softwareID = 34                 ; Software ID
config   = TRUE, FALSE          ; card/channel level configuration
commands = TRUE,FALSE           ; card/channel level commands
perf     = TRUE, FALSE          ; card/channel level performance
fault    = TRUE, FALSE          ; card/channel level faults
card_dat = trax.dat            ; card level MIB objects file
CardLabel = "HiPerTRAX", (-2,0)
sdl_2  = TRUE
ext_manager      = "HiPer TRAX", "offlinec.exe -d%IP %RWCS %SNUMBER" ; menu string, command line
max_channels = 0

[ITG_51]                ; Internet Telephony Gateway card, VoIP EdgeServer
softwareID = 51                 ; Software ID
config   = TRUE,FALSE           ;card/channel level configuration
commands = TRUE,FALSE           ; card/channel level commands
card_dat = edgsrvr.dat            ; card level MIB objects file
max_channels = 0

[HDME1R2_53]
softwareID = 53                 ; Software ID
config   = TRUE,TRUE           ;card/channel level configuration
commands = TRUE, TRUE           ;card/channel level commands
perf     = FALSE, TRUE          ;card/channel level performance
fault    = TRUE, TRUE          ; card/channel level faults
tests    = FALSE, FALSE, FALSE     ; card/channel level modem tests
features = FALSE, FALSE         ; card/channel level feature upgrade
autoresponse = TRUE, FALSE       ; card/channel level autoresponse
card_dat = hdmcard.dat          ; channel  level MIB objects file
group_dat = hdmgrp.dat
channel_dat = hdmchan.dat,1-30,hdr2.dat,31          ; card level .dat file, channel range, ...
subchannel_dat = hdmds0.dat,31          ; channel  level MIB objects file
sdl_2  = TRUE
max_channels = 30
max_subchannels = 30
max_groups = 4
group_select = TRUE

;***************************************************************************
; The following section contains information the derive the default NAC SDL file prefix.
; Key(sequential number)=software ID, card ID, NAC software prefix, NAC file filter, 
; SDL software prefix, SDL file filter
; Note: 
; 1. NAC ID/ Software ID combinations that cannot upgraded is indicated
; with the data value "NO-SDL".
; 2. NAC that do not have a SDL file have blank
;***************************************************************************

[NAC_DEFAULT_SDL_PREFIX]
1=0,,*,NAC files (*.nac)|*.nac||,*,SDL files (*.sdl)|*.sdl||
2=1,3,NM,Net Mgmt File (nm*.nac)|nm*.nac||,,
3=1,28,NM,Net Mgmt File (nm*.nac)|nm*.nac||,,
4=1,29,PM,Net Mgmt File (pm*.nac)|pm*.nac||,,
5=2,4,T1,Dual T1 (t1*.nac)|t1*.nac||,T1,Dual T1 (t1*.sdl)|t1*.sdl||
6=2,27,CT,Channelised T1 (ct*.nac)|ct*.nac||,CT,Channelised T1 (ct*.sdl)|ct*.sdl||
7=5,6,QM,Quad Modem (qm*.nac)|qm*.nac||, QM, Quad Modem (qm*.sdl)|qm*.sdl||
8=6,6,QM,Quad Modem (qm*.nac)|qm*.nac||, QM, Quad Modem (qm*.sdl)|qm*.sdl||
9=7,6,QM,Quad Modem (qm*.nac)|qm*.nac||, QM, Quad Modem (qm*.sdl)|qm*.sdl||
10=7,5,NO-SDL
11=8,7, TR,Token Ring Gwy (tr*.sdl)|tr*.sdl||,TR,Token Ring Gwy (tr*.sdl)|tr*.sdl||
12=8,19,TR,Token Ring Gwy (tr*.sdl)|tr*.sdl||,TR,Token Ring Gwy (tr*.sdl)|tr*.sdl||
13=9,8,XP,X.25 Card (xp*.nac)|xp*.nac||, XP, X.25 Card (xp*.sdl)|xp*.sdl||
14=9,23,XP,X.25 Card (xp*.nac)|xp*.nac||, XP, X.25 Card (xp*.sdl)|xp*.sdl||
15=9,39,XP,X.25 Card (xp*.nac)|xp*.nac||, XP, X.25 Card (xp*.sdl)|xp*.sdl||
16=10,5,NO-SDL
17=10,10,QT, Quad V.32 Digital (qt*.nac)|qt*.nac||, QT, Quad Digital V.32 (qt*.sdl)|qt*.sdl||
18=10,11,QT, Quad V.32 Analog (qt*.nac)|qt*.nac||, QT, Quad Analog V.32 (qt*.sdl)|qt*.sdl||
19=10,12,QT, Quad V.32 Analog/Digital (qt*.nac)|qt*.nac||, QT, Quad Analog/Digital V.32 (qt*.sdl)|qt*.sdl||
20=11,10,QT, Quad V.32 Digital (qt*.nac)|qt*.nac||, QT, Quad Digital V.32 (qt*.sdl)|qt*.sdl||
21=11,11,QT, Quad V.32 Analog (qt*.nac)|qt*.nac||, QT, Quad Analog V.32 (qt*.sdl)|qt*.sdl||
22=11,12,QT, Quad V.32 Analog/Digital (qt*.nac)|qt*.nac||, QT, Quad Analog/Digital V.32 (qt*.sdl)|qt*.sdl||
23=12,10,QT, Quad V.32 Digital (qt*.nac)|qt*.nac||, QT, Quad Digital V.32 (qt*.sdl)|qt*.sdl||
24=12,11,QT, Quad V.32 Analog (qt*.nac)|qt*.nac||, QT, Quad Analog V.32 (qt*.sdl)|qt*.sdl||
25=12,12,QT, Quad V.32 Analog/Digital (qt*.nac)|qt*.nac||, QT, Quad Analog/Digital V.32 (qt*.sdl)|qt*.sdl||
26=13,13,QF, Quad V.34 Digital (qf*.nac)|qf*.nac||, QF, Quad Digital V.34 (qf*.sdl)|qf*.sdl||
27=13,14,QF, Quad V.34 Analog (qf*.nac)|qf*.nac||, QF, Quad Analog V.34 (qf*.sdl)|qf*.sdl||
28=13,15,QF, Quad V.34 Analog/Digital (qf*.nac)|qf*.nac||, QF, Quad Analog/Digital V.34 (qf*.sdl)|qf*.sdl||
29=13,34,QR, Quad V.34 Digital (qr*.nac)|qr*.nac||, QR, Quad Digital V.34 (qr*.sdl)|qr*.sdl||
30=13,35,QR, Quad V.34 Analog (qr*.nac)|qr*.nac||, QR, Quad Analog V.34 (qr*.sdl)|qr*.sdl||
31=13,36,QR, Quad V.34 Analog/Digital (qr*.nac)|qr*.nac||, QR, Quad Analog/Digital V.34 (qr*.sdl)|qr*.sdl||
32=13,31,PF, V.34 modem (pf*.nac)|pf*.nac||, PF, V.34 modem (pf*.sdl)|pf*.sdl||
33=14,13,QF, Quad V.34 Digital (qf*.nac)|qf*.nac||, QF, Quad Digital V.34 (qf*.sdl)|qf*.sdl||
34=14,14,QF, Quad V.34 Analog (qf*.nac)|qf*.nac||, QF, Quad Analog V.34 (qf*.sdl)|qf*.sdl||
35=14,15,QF, Quad V.34 Analog/Digital (qf*.nac)|qf*.nac||, QF, Quad Analog/Digital V.34 (qf*.sdl)|qf*.sdl||
36=14,34,QR, Quad V.34 Digital (qr*.nac)|qr*.nac||, QR, Quad Digital V.34 (qr*.sdl)|qr*.sdl||
37=14,35,QR, Quad V.34 Analog (qr*.nac)|qr*.nac||, QR, Quad Analog V.34 (qr*.sdl)|qr*.sdl||
38=14,36,QR, Quad V.34 Analog/Digital (qr*.nac)|qr*.nac||, QR, Quad Analog/Digital V.34 (qr*.sdl)|qr*.sdl||
39=14,31,PF, V.34 modem (pf*.nac)|pf*.nac||, PF, V.34 modem (pf*.sdl)|pf*.sdl||
40=15,13,QF, Quad V.34 Digital (qf*.nac)|qf*.nac||, QF, Quad Digital V.34 (qf*.sdl)|qf*.sdl||
41=15,14,QF, Quad V.34 Analog (qf*.nac)|qf*.nac||, QF, Quad Analog V.34 (qf*.sdl)|qf*.sdl||
42=15,15,QF, Quad V.34 Analog/Digital (qf*.nac)|qf*.nac||, QF, Quad Analog/Digital V.34 (qf*.sdl)|qf*.sdl||
43=15,34,QR, Quad V.34 Digital (qr*.nac)|qr*.nac||, QR, Quad Digital V.34 (qr*.sdl)|qr*.sdl||
44=15,35,QR, Quad V.34 Analog (qr*.nac)|qr*.nac||, QR, Quad Analog V.34 (qr*.sdl)|qr*.sdl||
45=15,36,QR, Quad V.34 Analog/Digital (qr*.nac)|qr*.nac||, QR, Quad Analog/Digital V.34 (qr*.sdl)|qr*.sdl||
46=15,31,PF, V.34 modem (pf*.nac)|pf*.nac||, PF, V.34 modem (pf*.sdl)|pf*.sdl||
47=16,16,ST, Single T1 (st*.nac)|st*.nac||, T1, Single T1 (t1*.sdl)|t1*.sdl||
48=17,17,EN, Ethernet Gateway (en*.nac)|en*.nac||, EN, Ethernet Gateway (en*.sdl)|en*.sdl||
49=17,20,EN, 486 Ethernet Gateway (en*.nac)|en*.nac||, EN, 486 Ethernet Gateway (en*.sdl)|en*.sdl||
50=19,18,LR, Token Ring NETServer (lr*.nac)|lr*.nac||, LI, Token Ring NETServer (li*.sdl)|li*.sdl||
51=19,44,LR, Token Ring NETServer (lr*.nac)|lr*.nac||, LI, Token Ring NETServer (li*.sdl)|li*.sdl||
52=20,18,LE, Ethernet NETServer (le*.nac)|le*.nac||, LE, Ethernet NETServer (le*.sdl)|le*.sdl||
53=20,44,LE, Ethernet NETServer (le*.nac)|le*.nac||, LE, Ethernet NETServer (le*.sdl)|le*.sdl||
54=20,45,LE, Ethernet NETServer (le*.nac)|le*.nac||, LE, Ethernet NETServer (le*.sdl)|le*.sdl||
55=23,26,LI, ISDN Gwy (li*.nac)|li*.nac||, LI, ISDN Gwy (li*.sdl)|li*.sdl||
56=23,45,LI, ISDN Gwy (li*.nac)|li*.nac||, LI, ISDN Gwy (li*.sdl)|li*.sdl||
57=24,27,DP, T1 PRI (dp*.nac)|dp*.nac||, DP, T1 PRI (dp*.sdl)|dp*.sdl||
58=25,26,LR, Token Ring ISDN Gwy (lr*.nac)|lr*.nac||, LR, Token Ring ISDN Gwy (lr*.sdl)|lr*.sdl||
59=25,45,LR, Token Ring ISDN Gwy (lr*.nac)|lr*.nac||, LR, Token Ring ISDN Gwy (lr*.sdl)|lr*.sdl||
60=27,27,EP, E1 PRI (ep*.nac)|ep*.nac||, EP, E1 PRI (ep*.sdl)|ep*.sdl||
61=28,33,NO-SDL
62=29,42,WG, Wireless gateway (wg*.nac)|wg*.nac||, WG, Wireless gateway (wg*.sdl)|wg*.sdl||
63=1001,1002,NO-SDL
64=1001,1004,NO-SDL
65=1001,1009,NO-SDL
66=1001,1012,NO-SDL
67=31,13,QF, Quad I-Modem (qf*.nac)|qf*.nac||, QF, Quad Digital (qf*.sdl)|qf*.sdl||
68=31,14,QF, Quad I-Modem (qf*.nac)|qf*.nac||, QF, Quad Analog (qf*.sdl)|qf*.sdl||
69=31,15,QF, Quad I-Modem (qf*.nac)|qf*.nac||, QF, Quad Analog/Digital (qf*.sdl)|qf*.sdl||
70=31,34,QR, Quad I-Modem (qr*.nac)|qr*.nac||, QR, Quad Digital (qr*.sdl)|qr*.sdl||
71=31,35,QR, Quad I-Modem (qr*.nac)|qr*.nac||, QR, Quad Analog (qr*.sdl)|qr*.sdl||
72=31,36,QR, Quad I-Modem (qr*.nac)|qr*.nac||, QR, Quad Analog/Digital (qr*.sdl)|qr*.sdl||
73=32,27,EC, Channelised E1 (ec*.nac)|ec*.nac||,EC,Channelised E1 (ec*.sdl)|ec*.sdl||
74=34,48,NE, HiPerARC (ne*.dmf)|ne*.dmf||,, 
75=1,3,HM,Net Mgmt File (hm*.nac)|hm*.nac||,,
76=1,28,HM,Net Mgmt File (hm*.nac)|hm*.nac||,,
77=1000,3,HM,Net Mgmt File (hm*.nac)|hm*.nac||,,
78=1000,28,HM,Net Mgmt File (hm*.nac)|hm*.nac||,,
79=1000,1000,HM,Net Mgmt File (hm*.nac)|hm*.nac||,,
80=33,46,HD,HiPerDSP-24 (hd*.dmf)|hd*.dmf||,,
81=35,47,HE,HiPerDSP-30 (he*.dmf)|he*.dmf||,,
82=36,42,NO-SDL
83=38,42,NO-SDL
84=39,34,QC, Quad CDMA Modem (qc*.nac)|qc*.nac||, QC, Quad Digital (qc*.sdl)|qc*.sdl||
85=39,35,QC, Quad CDMA Modem (qc*.nac)|qc*.nac||, QC, Quad Analog (qc*.sdl)|qc*.sdl||
86=39,36,QC, Quad CDMA Modem (qc*.nac)|qc*.nac||, QC, Quad Analog/Digital (qc*.sdl)|qc*.sdl||
87=40,48,NO-SDL
88=37,27,ED, Dual DASS/2 (ed*.nac)|ed*.nac||, ED, Dual DASS/2 (ed*.sdl)|ed*.sdl||
89=46,50,HM,HiPerNMC Net Mgmt Card (hm*.dmf)|hm*.dmf||,,
90=36,33,CL,IWF CDMA Card (cl*.dmf)|cl*.dmf||,,
91=38,33,CN,IWF CDMA Card (cn*.dmf)|cn*.dmf||,,
92=50,33,CM,IWF CDMA Card (cm*.dmf)|cm*.dmf||,,
93=47,48,NE, HiPerARC (ne*.dmf)|ne*.dmf||,, 
94=15,48,NE, HiPerARC (ne*.dmf)|ne*.dmf||,, 
95=51,49,NO-SDL
96=53,47,HR,HiPerDSP E1 R2 (hr*.dmf)|hr*.dmf||,,
97=49,48,TR, HiPer TRAX (tr*.dmf)|tr*.dmf||,,