======================================================================== Nortel Networks, Inc Updated: 06/12/00 MLS Centillion 100 / 5000BH SpeedView Version 3.2.4.11 ======================================================================== RELEASE SUMMARY: =============== This is a PATCH release. PLATFORMS SUPPORTED: =================== Win95/Win98/WinNT NOTES FOR UPGRADE: ================= See release notes for release v3.2.2.1 VERSION OF PREVIOUS RELEASES: ============================ Version 3.2.4.10 release date: 04/10/00 COMPATIBILITY: ============= Manages C100/5000BH versions - 3.2.x.x NEW FEATURES IN THIS RELEASE: ============================ None. FEATURES ADDED IN PREVIOUS RELEASES: =================================== CR 96286 - A feature enhancement for Token Ring switches operating in Lane TB mode to answer LE_ARP requests for Route Descriptors. CR 97185 - Use system password to validate LNM linkup requests. When enabling LNM, the system password can now be used for validating LNM likup requests. CR 99063 - This release has added support for the 5424 module and OC12 module. Please refer to Release 4.0 User Guide for specific configuration information. OLD FEATURES REMOVED IN THIS RELEASE: ==================================== None. OLD FEATURES REMOVED IN PREVIOUS RELEASES: ========================================== Removed in 3.2.4.6 CR104623 - SmartLes Remove SmartLes feature. SmartLes is no longer supported with this version of Speedview. PROBLEMS RESOLVED IN THIS RELEASE: ================================= CR105708 - SNMP Logging in with two configuration sessions at the same time from two workstations. Verifies login state before downloading changes. CR129235 - PNNI Deleting the PNNI Node Level can cause an endless loop. PROBLEMS RESOLVED IN PREVIOUS RELEASES: ====================================== Problems fixed in 3.2.4.10 CR83377 - LANE Can not configure LECS Advanced Membership (Lane Policy) via SNMP. CR118307 - Token Ring Require switch reset after ARE/SRE hop count change. CR119169 - IISP New IISP route does not appear in the PNNI routing table when added dynamically. Require switch reset. CR121043 - SNMP Speedview crashes when adding BG 1 with 1 or more LAN cards. CR122176 - ATM Status Enquiry period can incorrectly be set to 0 with Spdview/SVconvert. Problems fixed in 3.2.4.6 CR112357 - 5000BH "snmp get error" when try to get statistics on right side of the chassis. Problems fixed in 3.2.4.5 CR 97551 - Baseline statistics for redundant ATM MCP is displayed incorrectly. CR108467 - Turbo CLC broke when starting is VCI 253, 254, 255 Problems fixed in 3.2.4.2 CR107420 - Downloading configuration via snmp to switch requires reset when there were no configuration changes. CR108763 - LNM options are not stored in the configuration correctly. Problems fixed in 3.2.4.0 CR 96286 - A feature enhancement for Token Ring switches operating in Lane TB mode to answer LE_ARP requests for Route Descriptors. CR 97185 - Use system password to validate LNM linkup requests. When enabling LNM, the system password can now be used for validating LNM likup requests. CR101787 - Unable to disable an ELAN in LECS configuration. CR102131 - Speedview 3.x offline config of MDA modules shows up blank. CR103340 - Disable Line Type in Speedview for E3 MDA. CR104814 - Frame forwarding state not correctly displayed with Speedview. This is caused by incorrectly converting the ring number Speedview received from the the switch. CR105336 - Snmp set error after adding a static station with a MAC address of all zeros. CR105337 - Force a switch reset after enabling or disabling Redundant MCP support. Problems fixed in 3.2.3.0 CR92664 - Centillion / ATM "local & remote" physical loopback broken Removed the "local & remote" option because the hardware does not support both "local & remote" at the same time. CR98802 - PVC/PVP check box is still checked when all PVC/PVP circuits are deleted. CR97762 - Packet Filter record is not converted correctly from 2.1 format to 3.2. CR91693 - Hide Scope and VPI fields when editing or adding link groups on the IISP dialog. CR84124 - Exclude 1 - 31 as valid management ring numbers. Management Ring Numbers in this range caused bridge group failures when the ring number equaled a bridge group number. CR93372 - Statistics, SNMP Spv displays wrong MLT port Frame Forwarding status on PythonTX. CR79119 - Statistics, under "Bridge Group#" column in Rings/Segments, assigned bridge groups are not displayed for some modules. Changed the display layout in Rings/Segment to allow 2-rowed heading. CR98334 - Limit the user to enter no more than 32 bytes for an ELAN name. CR90962 - Offline configuration: (1) display offline configuration file name in the configuration window, (2) allow only 1 copy of a configuration file to be loaded in a Speedview session in offline configuration. CR87099 - Reverse writing sequence of static station record and bridge port record into the configuration file. CR91271 - Disable speed detection when a port speed on a TR4 fiber card is set to 4 or 16. CR89729 - Adding a static entry with RIF results in a SNMP set error. CR101110 - Add C100 OC-12 and 5424 Cards to Add/Remove cards dialogs. CR100894 - Speedview 3.2.2.9 can't see 0C-12 on c100. CR100812 - Boxview of 5625 is wrong, bitmap is too wide. CR101297 - Speedview is slow at bringing up the 'Download using TFTP' Windows. CR101298 - Browse button doesn't always work in the Download dialogs. No additional known issues. For latest 3.2 release note information, please go to Bay Networks web page. http://support.baynetworks.com/library/bydoctype/switches.html#Centillion100 DEFINITION OF RELEASES: ====================== (c) 1999 Nortel Networks Incorporated. All rights reserved.