START-MIB DEFINITIONS ::= BEGIN internet OBJECT IDENTIFIER ::= { iso org(3) dod(6) 1 } directory OBJECT IDENTIFIER ::= { internet 1 } mgmt OBJECT IDENTIFIER ::= { internet 2 } experimental OBJECT IDENTIFIER ::= { internet 3 } private OBJECT IDENTIFIER ::= { internet 4 } enterprises OBJECT IDENTIFIER ::= { private 1 } snmpV2 OBJECT IDENTIFIER ::= { internet 6 } snmpModules OBJECT IDENTIFIER ::= { snmpV2 3 } snmpMIB OBJECT IDENTIFIER ::= { snmpModules 1 } snmpMIBObjects OBJECT IDENTIFIER ::= { snmpMIB 1 } snmpTrap OBJECT IDENTIFIER ::= { snmpMIBObjects 4 } snmpTraps OBJECT IDENTIFIER ::= { snmpMIBObjects 5 } -- Text Conventions TruthValue ::= INTEGER { true (1), false (2) } RowStatus ::= INTEGER { active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) } InterfaceIndex ::= Integer32 PhysAddress ::= OCTET STRING AutonomousType ::= OBJECT IDENTIFIER TestAndIncr ::= Integer32 -- HACK -- -- These well-known traps are placed here so we don't have to pull -- in a lot of SNMP V2 MIB files to get these variables. -- -- HACK coldStart NOTIFICATION-TYPE STATUS current DESCRIPTION "A coldStart trap signifies that the SNMPv2 entity, acting in an agent role, is reinitializing itself and that its configuration may have been altered." ::= { snmpTraps 1 } warmStart NOTIFICATION-TYPE STATUS current DESCRIPTION "A warmStart trap signifies that the SNMPv2 entity, acting in an agent role, is reinitializing itself such that its configuration is unaltered." ::= { snmpTraps 2 } authenticationFailure NOTIFICATION-TYPE STATUS current ::= { snmpTraps 5 } END RFC1213-MIB DEFINITIONS ::= BEGIN IMPORTS mgmt, NetworkAddress, IpAddress, Counter, Gauge, TimeTicks FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212; -- This MIB module uses the extended OBJECT-TYPE macro as -- defined in [14]; -- MIB-II (same prefix as MIB-I) mib-2 OBJECT IDENTIFIER ::= { mgmt 1 } -- textual conventions DisplayString ::= OCTET STRING -- This data type is used to model textual information taken -- from the NVT ASCII character set. By convention, objects -- with this syntax are declared as having -- -- SIZE (0..255) PhysAddress ::= OCTET STRING -- This data type is used to model media addresses. For many -- types of media, this will be in a binary representation. -- For example, an ethernet address would be represented as -- a string of 6 octets. -- groups in MIB-II system OBJECT IDENTIFIER ::= { mib-2 1 } interfaces OBJECT IDENTIFIER ::= { mib-2 2 } at OBJECT IDENTIFIER ::= { mib-2 3 } ip OBJECT IDENTIFIER ::= { mib-2 4 } icmp OBJECT IDENTIFIER ::= { mib-2 5 } tcp OBJECT IDENTIFIER ::= { mib-2 6 } udp OBJECT IDENTIFIER ::= { mib-2 7 } egp OBJECT IDENTIFIER ::= { mib-2 8 } -- historical (some say hysterical) -- cmot OBJECT IDENTIFIER ::= { mib-2 9 } transmission OBJECT IDENTIFIER ::= { mib-2 10 } snmp OBJECT IDENTIFIER ::= { mib-2 11 } -- the System group -- Implementation of the System group is mandatory for all -- systems. If an agent is not configured to have a value -- for any of these variables, a string of length 0 is -- returned. sysDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software. It is mandatory that this only contain printable ASCII characters." ::= { system 1 } sysObjectID OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining `what kind of box' is being managed. For example, if vendor `Flintstones, Inc.' was assigned the subtree 1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'." ::= { system 2 } sysUpTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The time (in hundredths of a second) since the network management portion of the system was last re-initialized." ::= { system 3 } sysContact OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "The textual identification of the contact person for this managed node, together with information on how to contact this person." ::= { system 4 } sysName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name." ::= { system 5 } sysLocation OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "The physical location of this node (e.g., `telephone closet, 3rd floor')." ::= { system 6 } sysServices OBJECT-TYPE SYNTAX INTEGER (0..127) ACCESS read-only STATUS mandatory DESCRIPTION "A value which indicates the set of services that this entity primarily offers. The value is a sum. This sum initially takes the value zero, Then, for each layer, L, in the range 1 through 7, that this node performs transactions for, 2 raised to (L - 1) is added to the sum. For example, a node which performs primarily routing functions would have a value of 4 (2^(3-1)). In contrast, a node which is a host offering application services would have a value of 72 (2^(4-1) + 2^(7-1)). Note that in the context of the Internet suite of protocols, values should be calculated accordingly: layer functionality 1 physical (e.g., repeaters) 2 datalink/subnetwork (e.g., bridges) 3 internet (e.g., IP gateways) 4 end-to-end (e.g., IP hosts) 7 applications (e.g., mail relays) For systems including OSI protocols, layers 5 and 6 may also be counted." ::= { system 7 } -- the Interfaces group -- Implementation of the Interfaces group is mandatory for -- all systems. ifNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of network interfaces (regardless of their current state) present on this system." ::= { interfaces 1 } -- the Interfaces table -- The Interfaces table contains information on the entity's -- interfaces. Each interface is thought of as being -- attached to a `subnetwork'. Note that this term should -- not be confused with `subnet' which refers to an -- addressing partitioning scheme used in the Internet suite -- of protocols. ifTable OBJECT-TYPE SYNTAX SEQUENCE OF IfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of interface entries. The number of entries is given by the value of ifNumber." ::= { interfaces 2 } ifEntry OBJECT-TYPE SYNTAX IfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An interface entry containing objects at the subnetwork layer and below for a particular interface." INDEX { ifIndex } ::= { ifTable 1 } IfEntry ::= SEQUENCE { ifIndex INTEGER, ifDescr DisplayString, ifType INTEGER, ifMtu INTEGER, ifSpeed Gauge, ifPhysAddress PhysAddress, ifAdminStatus INTEGER, ifOperStatus INTEGER, ifLastChange TimeTicks, ifInOctets Counter, ifInUcastPkts Counter, ifInNUcastPkts Counter, ifInDiscards Counter, ifInErrors Counter, ifInUnknownProtos Counter, ifOutOctets Counter, ifOutUcastPkts Counter, ifOutNUcastPkts Counter, ifOutDiscards Counter, ifOutErrors Counter, ifOutQLen Gauge, ifSpecific OBJECT IDENTIFIER } ifIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization." ::= { ifEntry 1 } ifDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the hardware interface." ::= { ifEntry 2 } ifType OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following regular1822(2), hdh1822(3), ddn-x25(4), rfc877-x25(5), ethernet-csmacd(6), iso88023-csmacd(7), iso88024-tokenBus(8), iso88025-tokenRing(9), iso88026-man(10), starLan(11), proteon-10Mbit(12), proteon-80Mbit(13), hyperchannel(14), fddi(15), lapb(16), sdlc(17), ds1(18), -- T-1 e1(19), -- european equiv. of T-1 basicISDN(20), primaryISDN(21), -- proprietary serial propPointToPointSerial(22), ppp(23), softwareLoopback(24), eon(25), -- CLNP over IP [11] ethernet-3Mbit(26), nsip(27), -- XNS over IP slip(28), -- generic SLIP ultra(29), -- ULTRA technologies ds3(30), -- T-3 sip(31), -- SMDS frame-relay(32) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack." ::= { ifEntry 3 } ifMtu OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface." ::= { ifEntry 4 } ifSpeed OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth." ::= { ifEntry 5 } ifPhysAddress OBJECT-TYPE SYNTAX PhysAddress ACCESS read-only STATUS mandatory DESCRIPTION "The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length." ::= { ifEntry 6 } ifAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), -- ready to pass packets down(2), testing(3) -- in some test mode } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The testing(3) state indicates that no operational packets can be passed." ::= { ifEntry 7 } ifOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), -- ready to pass packets down(2), testing(3) -- in some test mode } ACCESS read-only STATUS mandatory DESCRIPTION "The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed." ::= { ifEntry 8 } ifLastChange OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization of the local network management subsystem, then this object contains a zero value." ::= { ifEntry 9 } ifInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of octets received on the interface, including framing characters." ::= { ifEntry 10 } ifInUcastPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of subnetwork-unicast packets delivered to a higher-layer protocol." ::= { ifEntry 11 } ifInNUcastPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol." ::= { ifEntry 12 } ifInDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space." ::= { ifEntry 13 } ifInErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol." ::= { ifEntry 14 } ifInUnknownProtos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets received via the interface which were discarded because of an unknown or unsupported protocol." ::= { ifEntry 15 } ifOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of octets transmitted out of the interface, including framing characters." ::= { ifEntry 16 } ifOutUcastPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent." ::= { ifEntry 17 } ifOutNUcastPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent." ::= { ifEntry 18 } ifOutDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space." ::= { ifEntry 19 } ifOutErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of outbound packets that could not be transmitted because of errors." ::= { ifEntry 20 } ifOutQLen OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The length of the output packet queue (in packets)." ::= { ifEntry 21 } ifSpecific OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "A reference to MIB definitions specific to the particular media being used to realize the interface. For example, if the interface is realized by an ethernet, then the value of this object refers to a document defining objects specific to ethernet. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value." ::= { ifEntry 22 } -- the Address Translation group -- Implementation of the Address Translation group is -- mandatory for all systems. Note however that this group -- is deprecated by MIB-II. That is, it is being included -- solely for compatibility with MIB-I nodes, and will most -- likely be excluded from MIB-III nodes. From MIB-II and -- onwards, each network protocol group contains its own -- address translation tables. -- The Address Translation group contains one table which is -- the union across all interfaces of the translation tables -- for converting a NetworkAddress (e.g., an IP address) into -- a subnetwork-specific address. For lack of a better term, -- this document refers to such a subnetwork-specific address -- as a `physical' address. -- Examples of such translation tables are: for broadcast -- media where ARP is in use, the translation table is -- equivalent to the ARP cache; or, on an X.25 network where -- non-algorithmic translation to X.121 addresses is -- required, the translation table contains the -- NetworkAddress to X.121 address equivalences. atTable OBJECT-TYPE SYNTAX SEQUENCE OF AtEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "The Address Translation tables contain the NetworkAddress to `physical' address equivalences. Some interfaces do not use translation tables for determining address equivalences (e.g., DDN-X.25 has an algorithmic method); if all interfaces are of this type, then the Address Translation table is empty, i.e., has zero entries." ::= { at 1 } atEntry OBJECT-TYPE SYNTAX AtEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "Each entry contains one NetworkAddress to `physical' address equivalence." INDEX { atIfIndex, atNetAddress } ::= { atTable 1 } AtEntry ::= SEQUENCE { atIfIndex INTEGER, atPhysAddress PhysAddress, atNetAddress NetworkAddress } atIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS deprecated DESCRIPTION "The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { atEntry 1 } atPhysAddress OBJECT-TYPE SYNTAX PhysAddress ACCESS read-write STATUS deprecated DESCRIPTION "The media-dependent `physical' address. Setting this object to a null string (one of zero length) has the effect of invaliding the corresponding entry in the atTable object. That is, it effectively dissasociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant atPhysAddress object." ::= { atEntry 2 } atNetAddress OBJECT-TYPE SYNTAX NetworkAddress ACCESS read-write STATUS deprecated DESCRIPTION "The NetworkAddress (e.g., the IP address) corresponding to the media-dependent `physical' address." ::= { atEntry 3 } -- the IP group -- Implementation of the IP group is mandatory for all -- systems. ipForwarding OBJECT-TYPE SYNTAX INTEGER { forwarding(1), -- acting as a gateway not-forwarding(2) -- NOT acting as a gateway } ACCESS read-write STATUS mandatory DESCRIPTION "The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP gateways forward datagrams. IP hosts do not (except those source-routed via the host). Note that for some managed nodes, this object may take on only a subset of the values possible. Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to change this object to an inappropriate value." ::= { ip 1 } ipDefaultTTL OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The default value inserted into the Time-To-Live field of the IP header of datagrams originated at this entity, whenever a TTL value is not supplied by the transport layer protocol." ::= { ip 2 } ipInReceives OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of input datagrams received from interfaces, including those received in error." ::= { ip 3 } ipInHdrErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, etc." ::= { ip 4 } ipInAddrErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., 0.0.0.0) and addresses of unsupported Classes (e.g., Class E). For entities which are not IP Gateways and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address." ::= { ip 5 } ipForwDatagrams OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward them to that final destination. In entities which do not act as IP Gateways, this counter will include only those packets which were Source-Routed via this entity, and the Source- Route option processing was successful." ::= { ip 6 } ipInUnknownProtos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol." ::= { ip 7 } ipInDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly." ::= { ip 8 } ipInDelivers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of input datagrams successfully delivered to IP user-protocols (including ICMP)." ::= { ip 9 } ipOutRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipForwDatagrams." ::= { ip 10 } ipOutDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in ipForwDatagrams if any such packets met this (discretionary) discard criterion." ::= { ip 11 } ipOutNoRoutes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted in ipForwDatagrams which meet this `no-route' criterion. Note that this includes any datagarms which a host cannot route because all of its default gateways are down." ::= { ip 12 } ipReasmTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity." ::= { ip 13 } ipReasmReqds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IP fragments received which needed to be reassembled at this entity." ::= { ip 14 } ipReasmOKs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IP datagrams successfully re- assembled." ::= { ip 15 } ipReasmFails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of failures detected by the IP re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received." ::= { ip 16 } ipFragOKs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IP datagrams that have been successfully fragmented at this entity." ::= { ip 17 } ipFragFails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment flag was set." ::= { ip 18 } ipFragCreates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IP datagram fragments that have been generated as a result of fragmentation at this entity." ::= { ip 19 } -- the IP address table -- The IP address table contains this entity's IP addressing -- information. ipAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF IpAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of addressing information relevant to this entity's IP addresses." ::= { ip 20 } ipAddrEntry OBJECT-TYPE SYNTAX IpAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The addressing information for one of this entity's IP addresses." INDEX { ipAdEntAddr } ::= { ipAddrTable 1 } IpAddrEntry ::= SEQUENCE { ipAdEntAddr IpAddress, ipAdEntIfIndex INTEGER, ipAdEntNetMask IpAddress, ipAdEntBcastAddr INTEGER, ipAdEntReasmMaxSize INTEGER (0..65535) } ipAdEntAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP address to which this entry's addressing information pertains." ::= { ipAddrEntry 1 } ipAdEntIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { ipAddrEntry 2 } ipAdEntNetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0." ::= { ipAddrEntry 3 } ipAdEntBcastAddr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface." ::= { ipAddrEntry 4 } ipAdEntReasmMaxSize OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface." ::= { ipAddrEntry 5 } -- the IP routing table -- The IP routing table contains an entry for each route -- presently known to this entity. ipRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF IpRouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entity's IP Routing table." ::= { ip 21 } ipRouteEntry OBJECT-TYPE SYNTAX IpRouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A route to a particular destination." INDEX { ipRouteDest } ::= { ipRouteTable 1 } IpRouteEntry ::= SEQUENCE { ipRouteDest IpAddress, ipRouteIfIndex INTEGER, ipRouteMetric1 INTEGER, ipRouteMetric2 INTEGER, ipRouteMetric3 INTEGER, ipRouteMetric4 INTEGER, ipRouteNextHop IpAddress, ipRouteType INTEGER, ipRouteProto INTEGER, ipRouteAge INTEGER, ipRouteMask IpAddress, ipRouteMetric5 INTEGER, ipRouteInfo OBJECT IDENTIFIER } ipRouteDest OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use." ::= { ipRouteEntry 1 } ipRouteIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { ipRouteEntry 2 } ipRouteMetric1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1." ::= { ipRouteEntry 3 } ipRouteMetric2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1." ::= { ipRouteEntry 4 } ipRouteMetric3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1." ::= { ipRouteEntry 5 } ipRouteMetric4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1." ::= { ipRouteEntry 6 } ipRouteNextHop OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.)" ::= { ipRouteEntry 7 } ipRouteType OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following invalid(2), -- an invalidated route -- route to directly direct(3), -- connected (sub-)network -- route to a non-local indirect(4) -- host/network/sub-network } ACCESS read-write STATUS mandatory DESCRIPTION "The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipRouteTable object. That is, it effectively dissasociates the destination identified with said entry from the route identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipRouteType object." ::= { ipRouteEntry 8 } ipRouteProto OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following -- non-protocol information, -- e.g., manually configured local(2), -- entries -- set via a network netmgmt(3), -- management protocol -- obtained via ICMP, icmp(4), -- e.g., Redirect -- the remaining values are -- all gateway routing -- protocols egp(5), ggp(6), hello(7), rip(8), is-is(9), es-is(10), ciscoIgrp(11), bbnSpfIgp(12), ospf(13), bgp(14) } ACCESS read-only STATUS mandatory DESCRIPTION "The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols." ::= { ipRouteEntry 9 } ipRouteAge OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned." ::= { ipRouteEntry 10 } ipRouteMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipRouteMask by determining whether the value of the correspondent ipRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.0 class-C If the value of the ipRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism." ::= { ipRouteEntry 11 } ipRouteMetric5 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1." ::= { ipRouteEntry 12 } ipRouteInfo OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the route's ipRouteProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value." ::= { ipRouteEntry 13 } -- the IP Address Translation table -- The IP address translation table contain the IpAddress to -- `physical' address equivalences. Some interfaces do not -- use translation tables for determining address -- equivalences (e.g., DDN-X.25 has an algorithmic method); -- if all interfaces are of this type, then the Address -- Translation table is empty, i.e., has zero entries. ipNetToMediaTable OBJECT-TYPE SYNTAX SEQUENCE OF IpNetToMediaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The IP Address Translation table used for mapping from IP addresses to physical addresses." ::= { ip 22 } ipNetToMediaEntry OBJECT-TYPE SYNTAX IpNetToMediaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains one IpAddress to `physical' address equivalence." INDEX { ipNetToMediaIfIndex, ipNetToMediaNetAddress } ::= { ipNetToMediaTable 1 } IpNetToMediaEntry ::= SEQUENCE { ipNetToMediaIfIndex INTEGER, ipNetToMediaPhysAddress PhysAddress, ipNetToMediaNetAddress IpAddress, ipNetToMediaType INTEGER } ipNetToMediaIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { ipNetToMediaEntry 1 } ipNetToMediaPhysAddress OBJECT-TYPE SYNTAX PhysAddress ACCESS read-write STATUS mandatory DESCRIPTION "The media-dependent `physical' address." ::= { ipNetToMediaEntry 2 } ipNetToMediaNetAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IpAddress corresponding to the media- dependent `physical' address." ::= { ipNetToMediaEntry 3 } ipNetToMediaType OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following invalid(2), -- an invalidated mapping dynamic(3), static(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipNetToMediaTable. That is, it effectively dissasociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipNetToMediaType object." ::= { ipNetToMediaEntry 4 } -- additional IP objects ipRoutingDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of routing entries which were chosen to be discarded even though they are valid. One possible reason for discarding such an entry could be to free-up buffer space for other routing entries." ::= { ip 23 } -- the ICMP group -- Implementation of the ICMP group is mandatory for all -- systems. icmpInMsgs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of ICMP messages which the entity received. Note that this counter includes all those counted by icmpInErrors." ::= { icmp 1 } icmpInErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.)." ::= { icmp 2 } icmpInDestUnreachs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Destination Unreachable messages received." ::= { icmp 3 } icmpInTimeExcds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Time Exceeded messages received." ::= { icmp 4 } icmpInParmProbs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Parameter Problem messages received." ::= { icmp 5 } icmpInSrcQuenchs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Source Quench messages received." ::= { icmp 6 } icmpInRedirects OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Redirect messages received." ::= { icmp 7 } icmpInEchos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Echo (request) messages received." ::= { icmp 8 } icmpInEchoReps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Echo Reply messages received." ::= { icmp 9 } icmpInTimestamps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Timestamp (request) messages received." ::= { icmp 10 } icmpInTimestampReps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Timestamp Reply messages received." ::= { icmp 11 } icmpInAddrMasks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Address Mask Request messages received." ::= { icmp 12 } icmpInAddrMaskReps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Address Mask Reply messages received." ::= { icmp 13 } icmpOutMsgs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by icmpOutErrors." ::= { icmp 14 } icmpOutErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of IP to route the resultant datagram. In some implementations there may be no types of error which contribute to this counter's value." ::= { icmp 15 } icmpOutDestUnreachs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Destination Unreachable messages sent." ::= { icmp 16 } icmpOutTimeExcds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Time Exceeded messages sent." ::= { icmp 17 } icmpOutParmProbs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Parameter Problem messages sent." ::= { icmp 18 } icmpOutSrcQuenchs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Source Quench messages sent." ::= { icmp 19 } icmpOutRedirects OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects." ::= { icmp 20 } icmpOutEchos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Echo (request) messages sent." ::= { icmp 21 } icmpOutEchoReps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Echo Reply messages sent." ::= { icmp 22 } icmpOutTimestamps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Timestamp (request) messages sent." ::= { icmp 23 } icmpOutTimestampReps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Timestamp Reply messages sent." ::= { icmp 24 } icmpOutAddrMasks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Address Mask Request messages sent." ::= { icmp 25 } icmpOutAddrMaskReps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP Address Mask Reply messages sent." ::= { icmp 26 } -- the TCP group -- Implementation of the TCP group is mandatory for all -- systems that implement the TCP. -- Note that instances of object types that represent -- information about a particular TCP connection are -- transient; they persist only as long as the connection -- in question. tcpRtoAlgorithm OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following constant(2), -- a constant rto rsre(3), -- MIL-STD-1778, Appendix B vanj(4) -- Van Jacobson's algorithm [10] } ACCESS read-only STATUS mandatory DESCRIPTION "The algorithm used to determine the timeout value used for retransmitting unacknowledged octets." ::= { tcp 1 } tcpRtoMin OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The minimum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission timeout. In particular, when the timeout algorithm is rsre(3), an object of this type has the semantics of the LBOUND quantity described in RFC 793." ::= { tcp 2 } tcpRtoMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission timeout. In particular, when the timeout algorithm is rsre(3), an object of this type has the semantics of the UBOUND quantity described in RFC 793." ::= { tcp 3 } tcpMaxConn OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The limit on the total number of TCP connections the entity can support. In entities where the maximum number of connections is dynamic, this object should contain the value -1." ::= { tcp 4 } tcpActiveOpens OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSED state." ::= { tcp 5 } tcpPassiveOpens OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state." ::= { tcp 6 } tcpAttemptFails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state." ::= { tcp 7 } tcpEstabResets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state." ::= { tcp 8 } tcpCurrEstab OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of TCP connections for which the current state is either ESTABLISHED or CLOSE- WAIT." ::= { tcp 9 } tcpInSegs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of segments received, including those received in error. This count includes segments received on currently established connections." ::= { tcp 10 } tcpOutSegs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of segments sent, including those on current connections but excluding those containing only retransmitted octets." ::= { tcp 11 } tcpRetransSegs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of segments retransmitted - that is, the number of TCP segments transmitted containing one or more previously transmitted octets." ::= { tcp 12 } -- the TCP Connection table -- The TCP connection table contains information about this -- entity's existing TCP connections. tcpConnTable OBJECT-TYPE SYNTAX SEQUENCE OF TcpConnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table containing TCP connection-specific information." ::= { tcp 13 } tcpConnEntry OBJECT-TYPE SYNTAX TcpConnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a particular current TCP connection. An object of this type is transient, in that it ceases to exist when (or soon after) the connection makes the transition to the CLOSED state." INDEX { tcpConnLocalAddress, tcpConnLocalPort, tcpConnRemAddress, tcpConnRemPort } ::= { tcpConnTable 1 } TcpConnEntry ::= SEQUENCE { tcpConnState INTEGER, tcpConnLocalAddress IpAddress, tcpConnLocalPort INTEGER (0..65535), tcpConnRemAddress IpAddress, tcpConnRemPort INTEGER (0..65535) } tcpConnState OBJECT-TYPE SYNTAX INTEGER { closed(1), listen(2), synSent(3), synReceived(4), established(5), finWait1(6), finWait2(7), closeWait(8), lastAck(9), closing(10), timeWait(11), deleteTCB(12) } ACCESS read-write STATUS mandatory DESCRIPTION "The state of this TCP connection. The only value which may be set by a management station is deleteTCB(12). Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to set this object to any other value. If a management station sets this object to the value deleteTCB(12), then this has the effect of deleting the TCB (as defined in RFC 793) of the corresponding connection on the managed node, resulting in immediate termination of the connection. As an implementation-specific option, a RST segment may be sent from the managed node to the other TCP endpoint (note however that RST segments are not sent reliably)." ::= { tcpConnEntry 1 } tcpConnLocalAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The local IP address for this TCP connection. In the case of a connection in the listen state which is willing to accept connections for any IP interface associated with the node, the value 0.0.0.0 is used." ::= { tcpConnEntry 2 } tcpConnLocalPort OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The local port number for this TCP connection." ::= { tcpConnEntry 3 } tcpConnRemAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The remote IP address for this TCP connection." ::= { tcpConnEntry 4 } tcpConnRemPort OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The remote port number for this TCP connection." ::= { tcpConnEntry 5 } -- additional TCP objects tcpInErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of segments received in error (e.g., bad TCP checksums)." ::= { tcp 14 } tcpOutRsts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of TCP segments sent containing the RST flag." ::= { tcp 15 } -- the UDP group -- Implementation of the UDP group is mandatory for all -- systems which implement the UDP. udpInDatagrams OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of UDP datagrams delivered to UDP users." ::= { udp 1 } udpNoPorts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of received UDP datagrams for which there was no application at the destination port." ::= { udp 2 } udpInErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port." ::= { udp 3 } udpOutDatagrams OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of UDP datagrams sent from this entity." ::= { udp 4 } -- the UDP Listener table -- The UDP listener table contains information about this -- entity's UDP end-points on which a local application is -- currently accepting datagrams. udpTable OBJECT-TYPE SYNTAX SEQUENCE OF UdpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table containing UDP listener information." ::= { udp 5 } udpEntry OBJECT-TYPE SYNTAX UdpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a particular current UDP listener." INDEX { udpLocalAddress, udpLocalPort } ::= { udpTable 1 } UdpEntry ::= SEQUENCE { udpLocalAddress IpAddress, udpLocalPort INTEGER (0..65535) } udpLocalAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The local IP address for this UDP listener. In the case of a UDP listener which is willing to accept datagrams for any IP interface associated with the node, the value 0.0.0.0 is used." ::= { udpEntry 1 } udpLocalPort OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The local port number for this UDP listener." ::= { udpEntry 2 } -- the EGP group -- Implementation of the EGP group is mandatory for all -- systems which implement the EGP. egpInMsgs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of EGP messages received without error." ::= { egp 1 } egpInErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of EGP messages received that proved to be in error." ::= { egp 2 } egpOutMsgs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of locally generated EGP messages." ::= { egp 3 } egpOutErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of locally generated EGP messages not sent due to resource limitations within an EGP entity." ::= { egp 4 } -- the EGP Neighbor table -- The EGP neighbor table contains information about this -- entity's EGP neighbors. egpNeighTable OBJECT-TYPE SYNTAX SEQUENCE OF EgpNeighEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The EGP neighbor table." ::= { egp 5 } egpNeighEntry OBJECT-TYPE SYNTAX EgpNeighEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about this entity's relationship with a particular EGP neighbor." INDEX { egpNeighAddr } ::= { egpNeighTable 1 } EgpNeighEntry ::= SEQUENCE { egpNeighState INTEGER, egpNeighAddr IpAddress, egpNeighAs INTEGER, egpNeighInMsgs Counter, egpNeighInErrs Counter, egpNeighOutMsgs Counter, egpNeighOutErrs Counter, egpNeighInErrMsgs Counter, egpNeighOutErrMsgs Counter, egpNeighStateUps Counter, egpNeighStateDowns Counter, egpNeighIntervalHello INTEGER, egpNeighIntervalPoll INTEGER, egpNeighMode INTEGER, egpNeighEventTrigger INTEGER } egpNeighState OBJECT-TYPE SYNTAX INTEGER { idle(1), acquisition(2), down(3), up(4), cease(5) } ACCESS read-only STATUS mandatory DESCRIPTION "The EGP state of the local system with respect to this entry's EGP neighbor. Each EGP state is represented by a value that is one greater than the numerical value associated with said state in RFC 904." ::= { egpNeighEntry 1 } egpNeighAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP address of this entry's EGP neighbor." ::= { egpNeighEntry 2 } egpNeighAs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The autonomous system of this EGP peer. Zero should be specified if the autonomous system number of the neighbor is not yet known." ::= { egpNeighEntry 3 } egpNeighInMsgs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of EGP messages received without error from this EGP peer." ::= { egpNeighEntry 4 } egpNeighInErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of EGP messages received from this EGP peer that proved to be in error (e.g., bad EGP checksum)." ::= { egpNeighEntry 5 } egpNeighOutMsgs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of locally generated EGP messages to this EGP peer." ::= { egpNeighEntry 6 } egpNeighOutErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of locally generated EGP messages not sent to this EGP peer due to resource limitations within an EGP entity." ::= { egpNeighEntry 7 } egpNeighInErrMsgs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of EGP-defined error messages received from this EGP peer." ::= { egpNeighEntry 8 } egpNeighOutErrMsgs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of EGP-defined error messages sent to this EGP peer." ::= { egpNeighEntry 9 } egpNeighStateUps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of EGP state transitions to the UP state with this EGP peer." ::= { egpNeighEntry 10 } egpNeighStateDowns OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of EGP state transitions from the UP state to any other state with this EGP peer." ::= { egpNeighEntry 11 } egpNeighIntervalHello OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The interval between EGP Hello command retransmissions (in hundredths of a second). This represents the t1 timer as defined in RFC 904." ::= { egpNeighEntry 12 } egpNeighIntervalPoll OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The interval between EGP poll command retransmissions (in hundredths of a second). This represents the t3 timer as defined in RFC 904." ::= { egpNeighEntry 13 } egpNeighMode OBJECT-TYPE SYNTAX INTEGER { active(1), passive(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The polling mode of this EGP entity, either passive or active." ::= { egpNeighEntry 14 } egpNeighEventTrigger OBJECT-TYPE SYNTAX INTEGER { start(1), stop(2) } ACCESS read-write STATUS mandatory DESCRIPTION "A control variable used to trigger operator- initiated Start and Stop events. When read, this variable always returns the most recent value that egpNeighEventTrigger was set to. If it has not been set since the last initialization of the network management subsystem on the node, it returns a value of `stop'. When set, this variable causes a Start or Stop event on the specified neighbor, as specified on pages 8-10 of RFC 904. Briefly, a Start event causes an Idle peer to begin neighbor acquisition and a non-Idle peer to reinitiate neighbor acquisition. A stop event causes a non-Idle peer to return to the Idle state until a Start event occurs, either via egpNeighEventTrigger or otherwise." ::= { egpNeighEntry 15 } -- additional EGP objects egpAs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The autonomous system number of this EGP entity." ::= { egp 6 } -- the Transmission group -- Based on the transmission media underlying each interface -- on a system, the corresponding portion of the Transmission -- group is mandatory for that system. -- When Internet-standard definitions for managing -- transmission media are defined, the transmission group is -- used to provide a prefix for the names of those objects. -- Typically, such definitions reside in the experimental -- portion of the MIB until they are "proven", then as a -- part of the Internet standardization process, the -- definitions are accordingly elevated and a new object -- identifier, under the transmission group is defined. By -- convention, the name assigned is: -- -- type OBJECT IDENTIFIER ::= { transmission number } -- -- where "type" is the symbolic value used for the media in -- the ifType column of the ifTable object, and "number" is -- the actual integer value corresponding to the symbol. -- the SNMP group -- Implementation of the SNMP group is mandatory for all -- systems which support an SNMP protocol entity. Some of -- the objects defined below will be zero-valued in those -- SNMP implementations that are optimized to support only -- those functions specific to either a management agent or -- a management station. In particular, it should be -- observed that the objects below refer to an SNMP entity, -- and there may be several SNMP entities residing on a -- managed node (e.g., if the node is hosting acting as -- a management station). snmpInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of Messages delivered to the SNMP entity from the transport service." ::= { snmp 1 } snmpOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP Messages which were passed from the SNMP protocol entity to the transport service." ::= { snmp 2 } snmpInBadVersions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP Messages which were delivered to the SNMP protocol entity and were for an unsupported SNMP version." ::= { snmp 3 } snmpInBadCommunityNames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP Messages delivered to the SNMP protocol entity which used a SNMP community name not known to said entity." ::= { snmp 4 } snmpInBadCommunityUses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP Messages delivered to the SNMP protocol entity which represented an SNMP operation which was not allowed by the SNMP community named in the Message." ::= { snmp 5 } snmpInASNParseErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of ASN.1 or BER errors encountered by the SNMP protocol entity when decoding received SNMP Messages." ::= { snmp 6 } -- { snmp 7 } is not used snmpInTooBigs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `tooBig'." ::= { snmp 8 } snmpInNoSuchNames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `noSuchName'." ::= { snmp 9 } snmpInBadValues OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `badValue'." ::= { snmp 10 } snmpInReadOnlys OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number valid SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `readOnly'. It should be noted that it is a protocol error to generate an SNMP PDU which contains the value `readOnly' in the error-status field, as such this object is provided as a means of detecting incorrect implementations of the SNMP." ::= { snmp 11 } snmpInGenErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `genErr'." ::= { snmp 12 } snmpInTotalReqVars OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of MIB objects which have been retrieved successfully by the SNMP protocol entity as the result of receiving valid SNMP Get-Request and Get-Next PDUs." ::= { snmp 13 } snmpInTotalSetVars OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of MIB objects which have been altered successfully by the SNMP protocol entity as the result of receiving valid SNMP Set-Request PDUs." ::= { snmp 14 } snmpInGetRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP Get-Request PDUs which have been accepted and processed by the SNMP protocol entity." ::= { snmp 15 } snmpInGetNexts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP Get-Next PDUs which have been accepted and processed by the SNMP protocol entity." ::= { snmp 16 } snmpInSetRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP Set-Request PDUs which have been accepted and processed by the SNMP protocol entity." ::= { snmp 17 } snmpInGetResponses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP Get-Response PDUs which have been accepted and processed by the SNMP protocol entity." ::= { snmp 18 } snmpInTraps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP Trap PDUs which have been accepted and processed by the SNMP protocol entity." ::= { snmp 19 } snmpOutTooBigs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `tooBig.'" ::= { snmp 20 } snmpOutNoSuchNames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status is `noSuchName'." ::= { snmp 21 } snmpOutBadValues OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `badValue'." ::= { snmp 22 } -- { snmp 23 } is not used snmpOutGenErrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `genErr'." ::= { snmp 24 } snmpOutGetRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP Get-Request PDUs which have been generated by the SNMP protocol entity." ::= { snmp 25 } snmpOutGetNexts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP Get-Next PDUs which have been generated by the SNMP protocol entity." ::= { snmp 26 } snmpOutSetRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP Set-Request PDUs which have been generated by the SNMP protocol entity." ::= { snmp 27 } snmpOutGetResponses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP Get-Response PDUs which have been generated by the SNMP protocol entity." ::= { snmp 28 } snmpOutTraps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SNMP Trap PDUs which have been generated by the SNMP protocol entity." ::= { snmp 29 } snmpEnableAuthenTraps OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether the SNMP agent process is permitted to generate authentication-failure traps. The value of this object overrides any configuration information; as such, it provides a means whereby all authentication-failure traps may be disabled. Note that it is strongly recommended that this object be stored in non-volatile memory so that it remains constant between re-initializations of the network management system." ::= { snmp 30 } END RFC1271-MIB DEFINITIONS ::= BEGIN IMPORTS Counter, TimeTicks FROM RFC1155-SMI DisplayString, mib-2 FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212; -- This MIB module uses the extended OBJECT-TYPE macro as -- defined in [9]. -- Remote Network Monitoring MIB rmon OBJECT IDENTIFIER ::= { mib-2 16 } -- textual conventions OwnerString ::= DisplayString -- This data type is used to model an administratively -- assigned name of the owner of a resource. This -- information is taken from the NVT ASCII character set. -- It is suggested that this name contain one or more -- of the following: -- IP address, management station name, network manager's -- name, location, or phone number. -- In some cases the agent itself will be the owner of -- an entry. In these cases, this string shall be set -- to a string starting with 'monitor'. -- -- SNMP access control is articulated entirely in terms of -- the contents of MIB views; access to a particular SNMP -- object instance depends only upon its presence or -- absence in a particular MIB view and never upon its -- value or the value of related object instances. Thus, -- objects of this type afford resolution of resource -- contention only among cooperating managers; they -- realize no access control function with respect -- to uncooperative parties. -- -- By convention, objects with this syntax are declared -- as having -- -- SIZE (0..127) EntryStatus ::= INTEGER { valid(1), createRequest(2), underCreation(3), invalid(4) } -- The status of a table entry. -- -- Setting this object to the value invalid(4) has the -- effect of invalidating the corresponding entry. -- That is, it effectively disassociates the mapping -- identified with said entry. -- It is an implementation-specific matter as to whether -- the agent removes an invalidated entry from the table. -- Accordingly, management stations must be prepared to -- receive tabular information from agents that corresponds -- to entries currently not in use. Proper -- interpretation of such entries requires examination -- of the relevant EntryStatus object. -- -- An existing instance of this object cannot be set to -- createRequest(2). This object may only be set to -- createRequest(2) when this instance is created. When -- this object is created, the agent may wish to create -- supplemental object instances to complete a conceptual -- row in this table. Immediately after completing the -- create operation, the agent must set this object to -- underCreation(3). -- -- Entries shall exist in the underCreation(3) state until -- the management station is finished configuring the -- entry and sets this object to valid(1) or aborts, -- setting this object to invalid(4). If the agent -- determines that an entry has been in the -- underCreation(3) state for an abnormally long time, -- it may decide that the management station has -- crashed. If the agent makes this decision, -- it may set this object to invalid(4) to reclaim the -- entry. A prudent agent will understand that the -- management station may need to wait for human input -- and will allow for that possibility in its -- determination of this abnormally long period. statistics OBJECT IDENTIFIER ::= { rmon 1 } history OBJECT IDENTIFIER ::= { rmon 2 } alarm OBJECT IDENTIFIER ::= { rmon 3 } hosts OBJECT IDENTIFIER ::= { rmon 4 } hostTopN OBJECT IDENTIFIER ::= { rmon 5 } matrix OBJECT IDENTIFIER ::= { rmon 6 } filter OBJECT IDENTIFIER ::= { rmon 7 } capture OBJECT IDENTIFIER ::= { rmon 8 } event OBJECT IDENTIFIER ::= { rmon 9 } -- The Statistics Group -- -- Implementation of the Statistics group is optional. -- -- The statistics group contains statistics measured by the -- probe for each monitored interface on this device. These -- statistics take the form of free running counters that -- start from zero when a valid entry is created. -- -- This group currently has statistics defined only for -- Ethernet interfaces. Each etherStatsEntry contains -- statistics for one Ethernet interface. The probe must -- create one etherStats entry for each monitored Ethernet -- interface on the device. etherStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF EtherStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of Ethernet statistics entries." ::= { statistics 1 } etherStatsEntry OBJECT-TYPE SYNTAX EtherStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A collection of statistics kept for a particular Ethernet interface." INDEX { etherStatsIndex } ::= { etherStatsTable 1 } EtherStatsEntry ::= SEQUENCE { etherStatsIndex INTEGER (1..65535), etherStatsDataSource OBJECT IDENTIFIER, etherStatsDropEvents Counter, etherStatsOctets Counter, etherStatsPkts Counter, etherStatsBroadcastPkts Counter, etherStatsMulticastPkts Counter, etherStatsCRCAlignErrors Counter, etherStatsUndersizePkts Counter, etherStatsOversizePkts Counter, etherStatsFragments Counter, etherStatsJabbers Counter, etherStatsCollisions Counter, etherStatsPkts64Octets Counter, etherStatsPkts65to127Octets Counter, etherStatsPkts128to255Octets Counter, etherStatsPkts256to511Octets Counter, etherStatsPkts512to1023Octets Counter, etherStatsPkts1024to1518Octets Counter, etherStatsOwner DisplayString, etherStatsStatus EntryStatus } etherStatsIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object uniquely identifies this etherStats entry." ::= { etherStatsEntry 1 } etherStatsDataSource OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-write STATUS mandatory DESCRIPTION "This object identifies the source of the data that this etherStats entry is configured to analyze. This source can be any ethernet interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in [4,6], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all packets on the local network segment attached to the identified interface. This object may not be modified if the associated etherStatsStatus object is equal to valid(1)." ::= { etherStatsEntry 2 } etherStatsDropEvents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of events in which packets were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of packets dropped; it is just the number of times this condition has been detected." ::= { etherStatsEntry 3 } etherStatsOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets)." ::= { etherStatsEntry 4 } etherStatsPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets (including error packets) received." ::= { etherStatsEntry 5 } etherStatsBroadcastPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of good packets received that were directed to the broadcast address." ::= { etherStatsEntry 6 } etherStatsMulticastPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of good packets received that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address." ::= { etherStatsEntry 7 } etherStatsCRCAlignErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but were not an integral number of octets in length or had a bad Frame Check Sequence (FCS)." ::= { etherStatsEntry 8 } etherStatsUndersizePkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed." ::= { etherStatsEntry 9 } etherStatsOversizePkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed." ::= { etherStatsEntry 10 } etherStatsFragments OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets received that were not an integral number of octets in length or that had a bad Frame Check Sequence (FCS), and were less than 64 octets in length (excluding framing bits but including FCS octets)." ::= { etherStatsEntry 11 } etherStatsJabbers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and were not an integral number of octets in length or had a bad Frame Check Sequence (FCS)." ::= { etherStatsEntry 12 } etherStatsCollisions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The best estimate of the total number of collisions on this Ethernet segment." ::= { etherStatsEntry 13 } etherStatsPkts64Octets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets (including error packets) received that were 64 octets in length (excluding framing bits but including FCS octets)." ::= { etherStatsEntry 14 } etherStatsPkts65to127Octets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets (including error packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets)." ::= { etherStatsEntry 15 } etherStatsPkts128to255Octets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets (including error packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets)." ::= { etherStatsEntry 16 } etherStatsPkts256to511Octets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets (including error packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets)." ::= { etherStatsEntry 17 } etherStatsPkts512to1023Octets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets (including error packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets)." ::= { etherStatsEntry 18 } etherStatsPkts1024to1518Octets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets (including error packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets)." ::= { etherStatsEntry 19 } etherStatsOwner OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The entity that configured this entry and is therefore using the resources assigned to it." ::= { etherStatsEntry 20 } etherStatsStatus OBJECT-TYPE SYNTAX EntryStatus ACCESS read-write STATUS mandatory DESCRIPTION "The status of this etherStats entry." ::= { etherStatsEntry 21 } -- The History Group -- Implementation of the History group is optional. -- -- The history group records periodic statistical samples from -- a network and stores them for later retrieval. The -- historyControl table stores configuration entries that each -- define an interface, polling period, and other parameters. -- Once samples are taken, their data is stored in an entry -- in a media-specific table. Each such entry defines one -- sample, and is associated with the historyControlEntry that -- caused the sample to be taken. Currently the only media- -- specific table defined is the etherHistoryTable, for -- Ethernet networks. -- -- If the probe keeps track of the time of day, it should -- start the first sample of the history at a time such that -- when the next hour of the day begins, a sample is -- started at that instant. This tends to make more -- user-friendly reports, and enables comparison of reports -- from different probes that have relatively accurate time -- of day. -- -- The monitor is encouraged to add two history control entries -- per monitored interface upon initialization that describe -- a short term and a long term polling period. Suggested -- parameters are 30 seconds for the short term polling -- period and 30 minutes for the long term period. historyControlTable OBJECT-TYPE SYNTAX SEQUENCE OF HistoryControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of history control entries." ::= { history 1 } historyControlEntry OBJECT-TYPE SYNTAX HistoryControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of parameters that set up a periodic sampling of statistics." INDEX { historyControlIndex } ::= { historyControlTable 1 } HistoryControlEntry ::= SEQUENCE { historyControlIndex INTEGER (1..65535), historyControlDataSource OBJECT IDENTIFIER, historyControlBucketsRequested INTEGER (1..350), historyControlBucketsGranted INTEGER (1..350), historyControlInterval INTEGER (1..3600), historyControlOwner DisplayString, historyControlStatus EntryStatus } historyControlIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "An index that uniquely identifies an entry in the historyControl table. Each such entry defines a set of samples at a particular interval for an interface on the device." ::= { historyControlEntry 1 } historyControlDataSource OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-write STATUS mandatory DESCRIPTION "This object identifies the source of the data for which historical data was collected and placed in a media-specific table on behalf of this historyControlEntry. This source can be any interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in [4,6], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all packets on the local network segment attached to the identified interface. This object may not be modified if the associated historyControlStatus object is equal to valid(1)." ::= { historyControlEntry 2 } historyControlBucketsRequested OBJECT-TYPE SYNTAX INTEGER (1..350) ACCESS read-write STATUS mandatory DESCRIPTION "The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this historyControl entry. When this object is created or modified, the probe should set historyControlBucketsGranted as closely to this object as is possible for the particular probe implementation and available resources." DEFVAL { 50 } ::= { historyControlEntry 3 } historyControlBucketsGranted OBJECT-TYPE SYNTAX INTEGER (1..350) ACCESS read-only STATUS mandatory DESCRIPTION "The number of discrete sampling intervals over which data shall be saved in the part of the media-specific table associated with this historyControl entry. When the associated historyControlBucketsRequested object is created or modified, the probe should set this object as closely to the requested value as is possible for the particular probe implementation and available resources. The probe must not lower this value except as a result of a modification to the associated historyControlBucketsRequested object. There will be times when the actual number of buckets associated with this entry is less than the value of this object. In this case, at the end of each sampling interval, a new bucket will be added to the media-specific table. When the number of buckets reaches the value of this object and a new bucket is to be added to the media-specific table, the oldest bucket associated with this historyControlEntry shall be deleted by the agent so that the new bucket can be added. When the value of this object changes to a value less than the current value, entries are deleted from the media-specific table associated with this historyControlEntry. Enough of the oldest of these entries shall be deleted by the agent so that their number remains less than or equal to the new value of this object. When the value of this object changes to a value greater than the current value, the number of associated media-specific entries may be allowed to grow." ::= { historyControlEntry 4 } historyControlInterval OBJECT-TYPE SYNTAX INTEGER (1..3600) ACCESS read-write STATUS mandatory DESCRIPTION "The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this historyControl entry. This interval can be set to any number of seconds between 1 and 3600 (1 hour). Because the counters in a bucket may overflow at their maximum value with no indication, a prudent manager will take into account the possibility of overflow in any of the associated counters. It is important to consider the minimum time in which any counter could overflow on a particular media type and set the historyControlInterval object to a value less than this interval. This is typically most important for the 'octets' counter in any media-specific table. For example, on an Ethernet network, the etherHistoryOctets counter could overflow in about one hour at the Ethernet's maximum utilization. This object may not be modified if the associated historyControlStatus object is equal to valid(1)." DEFVAL { 1800 } ::= { historyControlEntry 5 } historyControlOwner OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The entity that configured this entry and is therefore using the resources assigned to it." ::= { historyControlEntry 6 } historyControlStatus OBJECT-TYPE SYNTAX EntryStatus ACCESS read-write STATUS mandatory DESCRIPTION "The status of this historyControl entry. Each instance of the media-specific table associated with this historyControlEntry will be deleted by the agent if this historyControlEntry is not equal to valid(1)." ::= { historyControlEntry 7 } -- Ether History table etherHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF EtherHistoryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of Ethernet history entries." ::= { history 2 } etherHistoryEntry OBJECT-TYPE SYNTAX EtherHistoryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An historical sample of Ethernet statistics on a particular Ethernet interface. This sample is associated with the historyControlEntry which set up the parameters for a regular collection of these samples." INDEX { etherHistoryIndex , etherHistorySampleIndex } ::= { etherHistoryTable 1 } EtherHistoryEntry ::= SEQUENCE { etherHistoryIndex INTEGER (1..65535), etherHistorySampleIndex INTEGER, etherHistoryIntervalStart TimeTicks, etherHistoryDropEvents Counter, etherHistoryOctets Counter, etherHistoryPkts Counter, etherHistoryBroadcastPkts Counter, etherHistoryMulticastPkts Counter, etherHistoryCRCAlignErrors Counter, etherHistoryUndersizePkts Counter, etherHistoryOversizePkts Counter, etherHistoryFragments Counter, etherHistoryJabbers Counter, etherHistoryCollisions Counter, etherHistoryUtilization INTEGER (0..10000) } etherHistoryIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The history of which this entry is a part. The history identified by a particular value of this index is the same history as identified by the same value of historyControlIndex." ::= { etherHistoryEntry 1 } etherHistorySampleIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An index that uniquely identifies the particular sample this entry represents among all samples associated with the same historyControlEntry. This index starts at 1 and increases by one as each new sample is taken." ::= { etherHistoryEntry 2 } etherHistoryIntervalStart OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime at the start of the interval over which this sample was measured. If the probe keeps track of the time of day, it should start the first sample of the history at a time such that when the next hour of the day begins, a sample is started at that instant. Note that following this rule may require the probe to delay collecting the first sample of the history, as each sample must be of the same interval. Also note that the sample which is currently being collected is not accessible in this table until the end of its interval." ::= { etherHistoryEntry 3 } etherHistoryDropEvents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of events in which packets were dropped by the probe due to lack of resources during this interval. Note that this number is not necessarily the number of packets dropped, it is just the number of times this condition has been detected." ::= { etherHistoryEntry 4 } etherHistoryOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets)." ::= { etherHistoryEntry 5 } etherHistoryPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets (including error packets) received during this sampling interval." ::= { etherHistoryEntry 6 } etherHistoryBroadcastPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of good packets received during this sampling interval that were directed to the broadcast address." ::= { etherHistoryEntry 7 } etherHistoryMulticastPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of good packets received during this sampling interval that were directed to a multicast address. Note that this number does not include packets addressed to the broadcast address." ::= { etherHistoryEntry 8 } etherHistoryCRCAlignErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets received during this sampling interval that had a length (excluding framing bits but including FCS octets) between 64 and 1518 octets, inclusive, but were not an integral number of octets in length or had a bad Frame Check Sequence (FCS)." ::= { etherHistoryEntry 9 } etherHistoryUndersizePkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets received during this interval that were less than 64 octets long (excluding framing bits but including FCS octets) and were otherwise well formed." ::= { etherHistoryEntry 10 } etherHistoryOversizePkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets received during this interval that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed." ::= { etherHistoryEntry 11 } etherHistoryFragments OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets received during this sampling interval that were not an integral number of octets in length or that had a bad Frame Check Sequence (FCS), and were less than 64 octets in length (excluding framing bits but including FCS octets)." ::= { etherHistoryEntry 12 } etherHistoryJabbers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets received during this interval that were longer than 1518 octets (excluding framing bits but including FCS octets), and were not an integral number of octets in length or had a bad Frame Check Sequence (FCS)." ::= { etherHistoryEntry 13 } etherHistoryCollisions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The best estimate of the total number of collisions on this Ethernet segment during this interval." ::= { etherHistoryEntry 14 } etherHistoryUtilization OBJECT-TYPE SYNTAX INTEGER (0..10000) ACCESS read-only STATUS mandatory DESCRIPTION "The best estimate of the mean physical layer network utilization on this interface during this interval, in hundredths of a percent." ::= { etherHistoryEntry 15 } -- The Alarm Group -- Implementation of the Alarm group is optional. -- -- The Alarm Group requires the implementation of the Event -- group. -- -- The Alarm group periodically takes statistical samples from -- variables in the probe and compares them to thresholds -- that have been configured. The alarm table stores -- configuration entries that each define a variable, -- polling period, and threshold parameters. If a sample is -- found to cross the threshold values, an event is -- generated. Only variables that resolve to an ASN.1 -- primitive type of INTEGER (INTEGER, Counter, -- Gauge, or TimeTicks) may be monitored in this way. -- -- This function has a hysteresis mechanism to limit the -- generation of events. This mechanism generates one event -- as a threshold is crossed in the appropriate direction. -- No more events are generated for that threshold until the -- opposite threshold is crossed. -- -- In the case of a sampling a deltaValue, a probe may -- implement this mechanism with more precision if it takes -- a delta sample twice per period, each time comparing the -- sum of the latest two samples to the threshold. This -- allows the detection of threshold crossings -- that span the sampling boundary. Note that this does not -- require any special configuration of the threshold value. -- It is suggested that probes implement this more precise -- algorithm. alarmTable OBJECT-TYPE SYNTAX SEQUENCE OF AlarmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of alarm entries." ::= { alarm 1 } alarmEntry OBJECT-TYPE SYNTAX AlarmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of parameters that set up a periodic checking for alarm conditions." INDEX { alarmIndex } ::= { alarmTable 1 } AlarmEntry ::= SEQUENCE { alarmIndex INTEGER (1..65535), alarmInterval INTEGER, alarmVariable OBJECT IDENTIFIER, alarmSampleType INTEGER, alarmValue INTEGER, alarmStartupAlarm INTEGER, alarmRisingThreshold INTEGER, alarmFallingThreshold INTEGER, alarmRisingEventIndex INTEGER (0..65535), alarmFallingEventIndex INTEGER (0..65535), alarmOwner DisplayString, alarmStatus EntryStatus } alarmIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "An index that uniquely identifies an entry in the alarm table. Each such entry defines a diagnostic sample at a particular interval for an object on the device." ::= { alarmEntry 1 } alarmInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The interval in seconds over which the data is sampled and compared with the rising and falling thresholds. When setting this variable, care should be given to ensure that the variable being monitored will not exceed 2^31 - 1 and roll over the alarmValue object during the interval. This object may not be modified if the associated alarmStatus object is equal to valid(1)." ::= { alarmEntry 2 } alarmVariable OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-write STATUS mandatory DESCRIPTION "The object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1 primitive type of INTEGER (INTEGER, Counter, Gauge, or TimeTicks) may be sampled. Because SNMP access control is articulated entirely in terms of the contents of MIB views, no access control mechanism exists that can restrict the value of this object to identify only those objects that exist in a particular MIB view. Because there is thus no acceptable means of restricting the read access that could be obtained through the alarm mechanism, the probe must only grant write access to this object in those views that have read access to all objects on the probe. During a set operation, if the supplied variable name is not available in the selected MIB view, a badValue error must be returned. If at any time the variable name of an established alarmEntry is no longer available in the selected MIB view, the probe must change the status of this alarmEntry to invalid(4). This object may not be modified if the associated alarmStatus object is equal to valid(1)." ::= { alarmEntry 3 } alarmSampleType OBJECT-TYPE SYNTAX INTEGER { absoluteValue(1), deltaValue(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The method of sampling the selected variable and calculating the value to be compared against the thresholds. If the value of this object is absoluteValue(1), the value of the selected variable will be compared directly with the thresholds at the end of the sampling interval. If the value of this object is deltaValue(2), the value of the selected variable at the last sample will be subtracted from the current value, and the difference compared with the thresholds. This object may not be modified if the associated alarmStatus object is equal to valid(1)." ::= { alarmEntry 4 } alarmValue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of the statistic during the last sampling period. The value during the current sampling period is not made available until the period is completed." ::= { alarmEntry 5 } alarmStartupAlarm OBJECT-TYPE SYNTAX INTEGER { risingAlarm(1), fallingAlarm(2), risingOrFallingAlarm(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The alarm that may be sent when this entry is first set to valid. If the first sample after this entry becomes valid is greater than or equal to the risingThreshold and alarmStartupAlarm is equal to risingAlarm(1) or risingOrFallingAlarm(3), then a single rising alarm will be generated. If the first sample after this entry becomes valid is less than or equal to the fallingThreshold and alarmStartupAlarm is equal to fallingAlarm(2) or risingOrFallingAlarm(3), then a single falling alarm will be generated. This object may not be modified if the associated alarmStatus object is equal to valid(1)." ::= { alarmEntry 6 } alarmRisingThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "A threshold for the sampled statistic. When the current sampled value is greater than or equal to this threshold, and the value at the last sampling interval was less than this threshold, a single event will be generated. A single event will also be generated if the first sample after this entry becomes valid is greater than or equal to this threshold and the associated alarmStartupAlarm is equal to risingAlarm(1) or risingOrFallingAlarm(3). After a rising event is generated, another such event will not be generated until the sampled value falls below this threshold and reaches the alarmFallingThreshold. This object may not be modified if the associated alarmStatus object is equal to valid(1)." ::= { alarmEntry 7 } alarmFallingThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "A threshold for the sampled statistic. When the current sampled value is less than or equal to this threshold, and the value at the last sampling interval was greater than this threshold, a single event will be generated. A single event will also be generated if the first sample after this entry becomes valid is less than or equal to this threshold and the associated alarmStartupAlarm is equal to fallingAlarm(2) or risingOrFallingAlarm(3). After a falling event is generated, another such event will not be generated until the sampled value rises above this threshold and reaches the alarmRisingThreshold. This object may not be modified if the associated alarmStatus object is equal to valid(1)." ::= { alarmEntry 8 } alarmRisingEventIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The index of the eventEntry that is used when a rising threshold is crossed. The eventEntry identified by a particular value of this index is the same as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In particular, if this value is zero, no associated event will be generated, as zero is not a valid event index. This object may not be modified if the associated alarmStatus object is equal to valid(1)." ::= { alarmEntry 9 } alarmFallingEventIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The index of the eventEntry that is used when a falling threshold is crossed. The eventEntry identified by a particular value of this index is the same as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In particular, if this value is zero, no associated event will be generated, as zero is not a valid event index. This object may not be modified if the associated alarmStatus object is equal to valid(1)." ::= { alarmEntry 10 } alarmOwner OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The entity that configured this entry and is therefore using the resources assigned to it." ::= { alarmEntry 11 } alarmStatus OBJECT-TYPE SYNTAX EntryStatus ACCESS read-write STATUS mandatory DESCRIPTION "The status of this alarm entry." ::= { alarmEntry 12 } -- The Host Group -- Implementation of the Host group is optional. -- -- The host group discovers new hosts on the network by -- keeping a list of source and destination MAC Addresses seen -- in good packets. For each of these addresses, the host -- group keeps a set of statistics. The hostControlTable -- controls which interfaces this function is performed on, -- and contains some information about the process. On -- behalf of each hostControlEntry, data is collected on an -- interface and placed both the hostTable and the -- hostTimeTable. If the monitoring device finds itself -- short of resources, it may delete entries as needed. It -- is suggested that the device delete the least recently -- used entries first. -- The hostTable contains entries for each address -- discovered on a particular interface. Each entry -- contains statistical data about that host. This table -- is indexed by the MAC address of the host, through -- which a random access may be achieved. -- The hostTimeTable contains data in the same format as the -- hostTable, and must contain the same set of hosts, but is -- indexed using hostTimeCreationOrder rather than hostAddress. -- The hostTimeCreationOrder is an integer which reflects -- the relative order in which a particular entry was -- discovered and thus inserted into the table. As this -- order, and thus index, is among those entries currently -- in the table, the index for a particular entry may change -- if an (earlier) entry is deleted. Thus the association -- between hostTimeCreationOrder and hostTimeEntry may be -- broken at any time. -- The hostTimeTable has two important uses. The first is the -- fast download of this potentially large table. Because the -- index of this table runs from 1 to the size of the table, -- inclusive, its values are predictable. This allows very -- efficient packing of variables into SNMP PDU's and allows -- a table transfer to have multiple packets outstanding. -- These benefits increase transfer rates tremendously. -- The second use of the hostTimeTable is the efficient -- discovery by the management station of new entries added -- to the table. After the management station has -- downloaded the entire table, it knows that new entries -- will be added immediately after the end of the current -- table. It can thus detect new entries there -- and retrieve them easily. -- Because the association between hostTimeCreationOrder and -- hostTimeEntry may be broken at any time, the management -- station must monitor the related hostControlLastDeleteTime -- object. When the management station thus detects a deletion, -- it must assume that any such associations have been broken, -- and invalidate any it has stored locally. This includes -- restarting any download of the hostTimeTable that may have -- been in progress, as well as rediscovering the end of the -- hostTimeTable so that it may detect new entries. If the -- management station does not detect the broken association, -- it may continue to refer to a particular host by its -- creationOrder while unwittingly retrieving the data -- associated with another host entirely. If this happens -- while downloading the host table, the management station -- may fail to download all of the entries in the table. hostControlTable OBJECT-TYPE SYNTAX SEQUENCE OF HostControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of host table control entries." ::= { hosts 1 } hostControlEntry OBJECT-TYPE SYNTAX HostControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of parameters that set up the discovery of hosts on a particular interface and the collection of statistics about these hosts." INDEX { hostControlIndex } ::= { hostControlTable 1 } HostControlEntry ::= SEQUENCE { hostControlIndex INTEGER (1..65535), hostControlDataSource OBJECT IDENTIFIER, hostControlTableSize INTEGER, hostControlLastDeleteTime TimeTicks, hostControlOwner DisplayString, hostControlStatus EntryStatus } hostControlIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "An index that uniquely identifies an entry in the hostControl table. Each such entry defines a function that discovers hosts on a particular interface and places statistics about them in the hostTable and the hostTimeTable on behalf of this hostControlEntry." ::= { hostControlEntry 1 } hostControlDataSource OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-write STATUS mandatory DESCRIPTION "This object identifies the source of the data for this instance of the host function. This source can be any interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in [4,6], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all packets on the local network segment attached to the identified interface. This object may not be modified if the associated hostControlStatus object is equal to valid(1)." ::= { hostControlEntry 2 } hostControlTableSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of hostEntries in the hostTable and the hostTimeTable associated with this hostControlEntry." ::= { hostControlEntry 3 } hostControlLastDeleteTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime when the last entry was deleted from the portion of the hostTable associated with this hostControlEntry. If no deletions have occurred, this value shall be zero." ::= { hostControlEntry 4 } hostControlOwner OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The entity that configured this entry and is therefore using the resources assigned to it." ::= { hostControlEntry 5 } hostControlStatus OBJECT-TYPE SYNTAX EntryStatus ACCESS read-write STATUS mandatory DESCRIPTION "The status of this hostControl entry. If this object is not equal to valid(1), all associated entries in the hostTable, hostTimeTable, and the hostTopNTable shall be deleted by the agent." ::= { hostControlEntry 6 } hostTable OBJECT-TYPE SYNTAX SEQUENCE OF HostEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of host entries." ::= { hosts 2 } hostEntry OBJECT-TYPE SYNTAX HostEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A collection of statistics for a particular host that has been discovered on an interface of this device." INDEX { hostIndex, hostAddress } ::= { hostTable 1 } HostEntry ::= SEQUENCE { hostAddress OCTET STRING, hostCreationOrder INTEGER (1..65535), hostIndex INTEGER (1..65535), hostInPkts Counter, hostOutPkts Counter, hostInOctets Counter, hostOutOctets Counter, hostOutErrors Counter, hostOutBroadcastPkts Counter, hostOutMulticastPkts Counter } hostAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The physical address of this host." ::= { hostEntry 1 } hostCreationOrder OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "An index that defines the relative ordering of the creation time of hosts captured for a particular hostControlEntry. This index shall be between 1 and N, where N is the value of the associated hostControlTableSize. The ordering of the indexes is based on the order of each entry's insertion into the table, in which entries added earlier have a lower index value than entries added later. It is important to note that the order for a particular entry may change as an (earlier) entry is deleted from the table. Because this order may change, management stations should make use of the hostControlLastDeleteTime variable in the hostControlEntry associated with the relevant portion of the hostTable. By observing this variable, the management station may detect the circumstances where a previous association between a value of hostCreationOrder and a hostEntry may no longer hold." ::= { hostEntry 2 } hostIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The set of collected host statistics of which this entry is a part. The set of hosts identified by a particular value of this index is associated with the hostControlEntry as identified by the same value of hostControlIndex." ::= { hostEntry 3 } hostInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets without errors transmitted to this address since it was added to the hostTable." ::= { hostEntry 4 } hostOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets including errors transmitted by this address since it was added to the hostTable." ::= { hostEntry 5 } hostInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of octets transmitted to this address since it was added to the hostTable (excluding framing bits but including FCS octets), except for those octets in packets that contained errors." ::= { hostEntry 6 } hostOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of octets transmitted by this address since it was added to the hostTable (excluding framing bits but including FCS octets), including those octets in packets that contained errors." ::= { hostEntry 7 } hostOutErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of error packets transmitted by this address since this host was added to the hostTable." ::= { hostEntry 8 } hostOutBroadcastPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of good packets transmitted by this address that were directed to the broadcast address since this host was added to the hostTable." ::= { hostEntry 9 } hostOutMulticastPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of good packets transmitted by this address that were directed to a multicast address since this host was added to the hostTable. Note that this number does not include packets directed to the broadcast address." ::= { hostEntry 10 } -- host Time Table hostTimeTable OBJECT-TYPE SYNTAX SEQUENCE OF HostTimeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of time-ordered host table entries." ::= { hosts 3 } hostTimeEntry OBJECT-TYPE SYNTAX HostTimeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A collection of statistics for a particular host that has been discovered on an interface of this device. This collection includes the relative ordering of the creation time of this object." INDEX { hostTimeIndex, hostTimeCreationOrder } ::= { hostTimeTable 1 } HostTimeEntry ::= SEQUENCE { hostTimeAddress OCTET STRING, hostTimeCreationOrder INTEGER (1..65535), hostTimeIndex INTEGER (1..65535), hostTimeInPkts Counter, hostTimeOutPkts Counter, hostTimeInOctets Counter, hostTimeOutOctets Counter, hostTimeOutErrors Counter, hostTimeOutBroadcastPkts Counter, hostTimeOutMulticastPkts Counter } hostTimeAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The physical address of this host." ::= { hostTimeEntry 1 } hostTimeCreationOrder OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "An index that uniquely identifies an entry in the hostTime table among those entries associated with the same hostControlEntry. This index shall be between 1 and N, where N is the value of the associated hostControlTableSize. The ordering of the indexes is based on the order of each entry's insertion into the table, in which entries added earlier have a lower index value than entries added later. Thus the management station has the ability to learn of new entries added to this table without downloading the entire table. It is important to note that the index for a particular entry may change as an (earlier) entry is deleted from the table. Because this order may change, management stations should make use of the hostControlLastDeleteTime variable in the hostControlEntry associated with the relevant portion of the hostTimeTable. By observing this variable, the management station may detect the circumstances where a download of the table may have missed entries, and where a previous association between a value of hostTimeCreationOrder and a hostTimeEntry may no longer hold." ::= { hostTimeEntry 2 } hostTimeIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The set of collected host statistics of which this entry is a part. The set of hosts identified by a particular value of this index is associated with the hostControlEntry as identified by the same value of hostControlIndex." ::= { hostTimeEntry 3 } hostTimeInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets without errors transmitted to this address since it was added to the hostTimeTable." ::= { hostTimeEntry 4 } hostTimeOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets including errors transmitted by this address since it was added to the hostTimeTable." ::= { hostTimeEntry 5 } hostTimeInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of octets transmitted to this address since it was added to the hostTimeTable (excluding framing bits but including FCS octets), except for those octets in packets that contained errors." ::= { hostTimeEntry 6 } hostTimeOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of octets transmitted by this address since it was added to the hostTimeTable (excluding framing bits but including FCS octets), including those octets in packets that contained errors." ::= { hostTimeEntry 7 } hostTimeOutErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of error packets transmitted by this address since this host was added to the hostTimeTable." ::= { hostTimeEntry 8 } hostTimeOutBroadcastPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of good packets transmitted by this address that were directed to the broadcast address since this host was added to the hostTimeTable." ::= { hostTimeEntry 9 } hostTimeOutMulticastPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of good packets transmitted by this address that were directed to a multicast address since this host was added to the hostTimeTable. Note that this number does not include packets directed to the broadcast address." ::= { hostTimeEntry 10 } -- The Host Top "N" Group -- Implementation of the Host Top N group is optional. -- -- The Host Top N group requires the implementation of the -- host group. -- -- The Host Top N group is used to prepare reports that -- describe the hosts that top a list ordered by one of -- their statistics. The available statistics are samples -- of one of their base statistics, over an interval -- specified by the management station. Thus, these -- statistics are rate based. The management -- station also selects how many such hosts are reported. -- The hostTopNControlTable is used to initiate the generation -- of such a report. The management station may select the -- parameters of such a report, such as which interface, -- which statistic, how many hosts, and the start and stop -- times of the sampling. When the report is prepared, -- entries are created in the hostTopNTable associated with -- the relevant hostTopNControlEntry. These entries are -- static for each report after it has been prepared. hostTopNControlTable OBJECT-TYPE SYNTAX SEQUENCE OF HostTopNControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of top N host control entries." ::= { hostTopN 1 } hostTopNControlEntry OBJECT-TYPE SYNTAX HostTopNControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A set of parameters that control the creation of a report of the top N hosts according to several metrics." INDEX { hostTopNControlIndex } ::= { hostTopNControlTable 1 } HostTopNControlEntry ::= SEQUENCE { hostTopNControlIndex INTEGER (1..65535), hostTopNHostIndex INTEGER (1..65535), hostTopNRateBase INTEGER, hostTopNTimeRemaining INTEGER, hostTopNDuration INTEGER, hostTopNRequestedSize INTEGER, hostTopNGrantedSize INTEGER, hostTopNStartTime TimeTicks, hostTopNOwner DisplayString, hostTopNStatus EntryStatus } hostTopNControlIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "An index that uniquely identifies an entry in the hostTopNControl table. Each such entry defines one top N report prepared for one interface." ::= { hostTopNControlEntry 1 } hostTopNHostIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The host table for which a top N report will be prepared on behalf of this entry. The host table identified by a particular value of this index is associated with the same host table as identified by the same value of hostIndex. This object may not be modified if the associated hostTopNStatus object is equal to valid(1)." ::= { hostTopNControlEntry 2 } hostTopNRateBase OBJECT-TYPE SYNTAX INTEGER { hostTopNInPkts(1), hostTopNOutPkts(2), hostTopNInOctets(3), hostTopNOutOctets(4), hostTopNOutErrors(5), hostTopNOutBroadcastPkts(6), hostTopNOutMulticastPkts(7) } ACCESS read-write STATUS mandatory DESCRIPTION "The variable for each host that the hostTopNRate variable is based upon. This object may not be modified if the associated hostTopNStatus object is equal to valid(1)." ::= { hostTopNControlEntry 3 } hostTopNTimeRemaining OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of seconds left in the report currently being collected. When this object is modified by the management station, a new collection is started, possibly aborting a currently running report. The new value is used as the requested duration of this report, which is loaded into the associated hostTopNDuration object. When this object is set to a non-zero value, any associated hostTopNEntries shall be made inaccessible by the monitor. While the value of this object is non-zero, it decrements by one per second until it reaches zero. During this time, all associated hostTopNEntries shall remain inaccessible. At the time that this object decrements to zero, the report is made accessible in the hostTopNTable. Thus, the hostTopN table needs to be created only at the end of the collection interval." DEFVAL { 0 } ::= { hostTopNControlEntry 4 } hostTopNDuration OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of seconds that this report has collected during the last sampling interval, or if this report is currently being collected, the number of seconds that this report is being collected during this sampling interval. When the associated hostTopNTimeRemaining object is set, this object shall be set by the probe to the same value and shall not be modified until the next time the hostTopNTimeRemaining is set. This value shall be zero if no reports have been requested for this hostTopNControlEntry." DEFVAL { 0 } ::= { hostTopNControlEntry 5 } hostTopNRequestedSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of hosts requested for the top N table. When this object is created or modified, the probe should set hostTopNGrantedSize as closely to this object as is possible for the particular probe implementation and available resources." DEFVAL { 10 } ::= { hostTopNControlEntry 6 } hostTopNGrantedSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of hosts in the top N table. When the associated hostTopNRequestedSize object is created or modified, the probe should set this object as closely to the requested value as is possible for the particular implementation and available resources. The probe must not lower this value except as a result of a set to the associated hostTopNRequestedSize object. Hosts with the highest value of hostTopNRate shall be placed in this table in decreasing order of this rate until there is no more room or until there are no more hosts." ::= { hostTopNControlEntry 7 } hostTopNStartTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime when this top N report was last started. In other words, this is the time that the associated hostTopNTimeRemaining object was modified to start the requested report." ::= { hostTopNControlEntry 8 } hostTopNOwner OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The entity that configured this entry and is therefore using the resources assigned to it." ::= { hostTopNControlEntry 9 } hostTopNStatus OBJECT-TYPE SYNTAX EntryStatus ACCESS read-write STATUS mandatory DESCRIPTION "The status of this hostTopNControl entry. If this object is not equal to valid(1), all associated hostTopNEntries shall be deleted by the agent." ::= { hostTopNControlEntry 10 } hostTopNTable OBJECT-TYPE SYNTAX SEQUENCE OF HostTopNEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of top N host entries." ::= { hostTopN 2 } hostTopNEntry OBJECT-TYPE SYNTAX HostTopNEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A set of statistics for a host that is part of a top N report." INDEX { hostTopNReport, hostTopNIndex } ::= { hostTopNTable 1 } HostTopNEntry ::= SEQUENCE { hostTopNReport INTEGER (1..65535), hostTopNIndex INTEGER (1..65535), hostTopNAddress OCTET STRING, hostTopNRate INTEGER } hostTopNReport OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies the top N report of which this entry is a part. The set of hosts identified by a particular value of this object is part of the same report as identified by the same value of the hostTopNControlIndex object." ::= { hostTopNEntry 1 } hostTopNIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "An index that uniquely identifies an entry in the hostTopN table among those in the same report. This index is between 1 and N, where N is the number of entries in this table. Increasing values of hostTopNIndex shall be assigned to entries with decreasing values of hostTopNRate until index N is assigned to the entry with the lowest value of hostTopNRate or there are no more hostTopNEntries." ::= { hostTopNEntry 2 } hostTopNAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The physical address of this host." ::= { hostTopNEntry 3 } hostTopNRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The amount of change in the selected variable during this sampling interval. The selected variable is this host's instance of the object selected by hostTopNRateBase." ::= { hostTopNEntry 4 } -- The Matrix Group -- Implementation of the Matrix group is optional. -- -- The Matrix group consists of the matrixControlTable, -- matrixSDTable and the matrixDSTable. These tables -- store statistics for a particular conversation between -- two addresses. As the device detects a new conversation, -- including those to a non-unicast address, it creates a -- new entry in both of the matrix tables. -- It must only create new entries based on information -- received in good packets. If the monitoring device finds -- itself short of resources, it may delete entries as needed. -- It is suggested that the device delete the least recently -- used entries first. matrixControlTable OBJECT-TYPE SYNTAX SEQUENCE OF MatrixControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of information entries for the traffic matrix on each interface." ::= { matrix 1 } matrixControlEntry OBJECT-TYPE SYNTAX MatrixControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a traffic matrix on a particular interface." INDEX { matrixControlIndex } ::= { matrixControlTable 1 } MatrixControlEntry ::= SEQUENCE { matrixControlIndex INTEGER (1..65535), matrixControlDataSource OBJECT IDENTIFIER, matrixControlTableSize INTEGER, matrixControlLastDeleteTime TimeTicks, matrixControlOwner DisplayString, matrixControlStatus EntryStatus } matrixControlIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "An index that uniquely identifies an entry in the matrixControl table. Each such entry defines a function that discovers conversations on a particular interface and places statistics about them in the matrixSDTable and the matrixDSTable on behalf of this matrixControlEntry." ::= { matrixControlEntry 1 } matrixControlDataSource OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-write STATUS mandatory DESCRIPTION "This object identifies the source of the data from which this entry creates a traffic matrix. This source can be any interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in [4,6], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all packets on the local network segment attached to the identified interface. This object may not be modified if the associated matrixControlStatus object is equal to valid(1)." ::= { matrixControlEntry 2 } matrixControlTableSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of matrixSDEntries in the matrixSDTable for this interface. This must also be the value of the number of entries in the matrixDSTable for this interface." ::= { matrixControlEntry 3 } matrixControlLastDeleteTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime when the last entry was deleted from the portion of the matrixSDTable or matrixDSTable associated with this matrixControlEntry. If no deletions have occurred, this value shall be zero." ::= { matrixControlEntry 4 } matrixControlOwner OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The entity that configured this entry and is therefore using the resources assigned to it." ::= { matrixControlEntry 5 } matrixControlStatus OBJECT-TYPE SYNTAX EntryStatus ACCESS read-write STATUS mandatory DESCRIPTION "The status of this matrixControl entry. If this object is not equal to valid(1), all associated entries in the matrixSDTable and the matrixDSTable shall be deleted by the agent." ::= { matrixControlEntry 6 } matrixSDTable OBJECT-TYPE SYNTAX SEQUENCE OF MatrixSDEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of traffic matrix entries indexed by source and destination MAC address." ::= { matrix 2 } matrixSDEntry OBJECT-TYPE SYNTAX MatrixSDEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A collection of statistics for communications between two addresses on a particular interface." INDEX { matrixSDIndex, matrixSDSourceAddress, matrixSDDestAddress } ::= { matrixSDTable 1 } MatrixSDEntry ::= SEQUENCE { matrixSDSourceAddress OCTET STRING, matrixSDDestAddress OCTET STRING, matrixSDIndex INTEGER (1..65535), matrixSDPkts Counter, matrixSDOctets Counter, matrixSDErrors Counter } matrixSDSourceAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The source physical address." ::= { matrixSDEntry 1 } matrixSDDestAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The destination physical address." ::= { matrixSDEntry 2 } matrixSDIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The set of collected matrix statistics of which this entry is a part. The set of matrix statistics identified by a particular value of this index is associated with the same matrixControlEntry as identified by the same value of matrixControlIndex." ::= { matrixSDEntry 3 } matrixSDPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets transmitted from the source address to the destination address (this number includes error packets)." ::= { matrixSDEntry 4 } matrixSDOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of octets (excluding framing bits but including FCS octets) contained in all packets transmitted from the source address to the destination address." ::= { matrixSDEntry 5 } matrixSDErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of error packets transmitted from the source address to the destination address." ::= { matrixSDEntry 6 } -- Traffic matrix tables from destination to source matrixDSTable OBJECT-TYPE SYNTAX SEQUENCE OF MatrixDSEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of traffic matrix entries indexed by destination and source MAC address." ::= { matrix 3 } matrixDSEntry OBJECT-TYPE SYNTAX MatrixDSEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A collection of statistics for communications between two address on a particular interface." INDEX { matrixDSIndex, matrixDSDestAddress, matrixDSSourceAddress } ::= { matrixDSTable 1 } MatrixDSEntry ::= SEQUENCE { matrixDSSourceAddress OCTET STRING, matrixDSDestAddress OCTET STRING, matrixDSIndex INTEGER (1..65535), matrixDSPkts Counter, matrixDSOctets Counter, matrixDSErrors Counter } matrixDSSourceAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The source physical address." ::= { matrixDSEntry 1 } matrixDSDestAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The destination physical address." ::= { matrixDSEntry 2 } matrixDSIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The set of collected matrix statistics of which this entry is a part. The set of matrix statistics identified by a particular value of this index is associated with the same matrixControlEntry as identified by the same value of matrixControlIndex." ::= { matrixDSEntry 3 } matrixDSPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets transmitted from the source address to the destination address (this number includes error packets)." ::= { matrixDSEntry 4 } matrixDSOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of octets (excluding framing bits but including FCS octets) contained in all packets transmitted from the source address to the destination address." ::= { matrixDSEntry 5 } matrixDSErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of error packets transmitted from the source address to the destination address." ::= { matrixDSEntry 6 } -- The Filter Group -- Implementation of the Filter group is optional. -- -- The Filter group allows packets to be captured with an -- arbitrary filter expression. A logical data and -- event stream or "channel" is formed by the packets -- that match the filter expression. -- -- This filter mechanism allows the creation of an arbitrary -- logical expression with which to filter packets. Each -- filter associated with a channel is OR'ed with the others. -- Within a filter, any bits checked in the data and status are -- AND'ed with respect to other bits in the same filter. The -- NotMask also allows for checking for inequality. Finally, -- the channelAcceptType object allows for inversion of the -- whole equation. -- -- The channel can be turned on or off, and can also -- generate events when packets pass through it. filterTable OBJECT-TYPE SYNTAX SEQUENCE OF FilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of packet filter entries." ::= { filter 1 } filterEntry OBJECT-TYPE SYNTAX FilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A set of parameters for a packet filter applied on a particular interface." INDEX { filterIndex } ::= { filterTable 1 } FilterEntry ::= SEQUENCE { filterIndex INTEGER (1..65535), filterChannelIndex INTEGER (1..65535), filterPktDataOffset INTEGER, filterPktData OCTET STRING, filterPktDataMask OCTET STRING, filterPktDataNotMask OCTET STRING, filterPktStatus INTEGER, filterPktStatusMask INTEGER, filterPktStatusNotMask INTEGER, filterOwner DisplayString, filterStatus EntryStatus } filterIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "An index that uniquely identifies an entry in the filter table. Each such entry defines one filter that is to be applied to every packet received on an interface." ::= { filterEntry 1 } filterChannelIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "This object identifies the channel of which this filter is a part. The filters identified by a particular value of this object are associated with the same channel as identified by the same value of the channelIndex object." ::= { filterEntry 2 } filterPktDataOffset OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The offset from the beginning of each packet where a match of packet data will be attempted. This offset is measured from the point in the physical layer packet after the framing bits, if any. For example, in an Ethernet frame, this point is at the beginning of the destination MAC address. This object may not be modified if the associated filterStatus object is equal to valid(1)." DEFVAL { 0 } ::= { filterEntry 3 } filterPktData OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The data that is to be matched with the input packet. For each packet received, this filter and the accompanying filterPktDataMask and filterPktDataNotMask will be adjusted for the offset. The only bits relevant to this match algorithm are those that have the corresponding filterPktDataMask bit equal to one. The following three rules are then applied to every packet: (1) If the packet is too short and does not have data corresponding to part of the filterPktData, the packet will fail this data match. (2) For each relevant bit from the packet with the corresponding filterPktDataNotMask bit set to zero, if the bit from the packet is not equal to the corresponding bit from the filterPktData, then the packet will fail this data match. (3) If for every relevant bit from the packet with the corresponding filterPktDataNotMask bit set to one, the bit from the packet is equal to the corresponding bit from the filterPktData, then the packet will fail this data match. Any packets that have not failed any of the three matches above have passed this data match. This object may not be modified if the associated filterStatus object is equal to valid(1)." ::= { filterEntry 4 } filterPktDataMask OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The mask that is applied to the match process. After adjusting this mask for the offset, only those bits in the received packet that correspond to bits set in this mask are relevant for further processing by the match algorithm. The offset is applied to filterPktDataMask in the same way it is applied to the filter. For the purposes of the matching algorithm, if the associated filterPktData object is longer than this mask, this mask is conceptually extended with '1' bits until it reaches the length of the filterPktData object. This object may not be modified if the associated filterStatus object is equal to valid(1)." ::= { filterEntry 5 } filterPktDataNotMask OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The inversion mask that is applied to the match process. After adjusting this mask for the offset, those relevant bits in the received packet that correspond to bits cleared in this mask must all be equal to their corresponding bits in the filterPktData object for the packet to be accepted. In addition, at least one of those relevant bits in the received packet that correspond to bits set in this mask must be different to its corresponding bit in the filterPktData object. For the purposes of the matching algorithm, if the associated filterPktData object is longer than this mask, this mask is conceptually extended with '0' bits until it reaches the length of the filterPktData object. This object may not be modified if the associated filterStatus object is equal to valid(1)." ::= { filterEntry 6 } filterPktStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The status that is to be matched with the input packet. The only bits relevant to this match algorithm are those that have the corresponding filterPktStatusMask bit equal to one. The following two rules are then applied to every packet: (1) For each relevant bit from the packet status with the corresponding filterPktStatusNotMask bit set to zero, if the bit from the packet status is not equal to the corresponding bit from the filterPktStatus, then the packet will fail this status match. (2) If for every relevant bit from the packet status with the corresponding filterPktStatusNotMask bit set to one, the bit from the packet status is equal to the corresponding bit from the filterPktStatus, then the packet will fail this status match. Any packets that have not failed either of the two matches above have passed this status match. The value of the packet status is a sum. This sum initially takes the value zero. Then, for each error, E, that has been discovered in this packet, 2 raised to a value representing E is added to the sum. The errors and the bits that represent them are dependent on the media type of the interface that this channel is receiving packets from. The errors defined for a packet captured off of an Ethernet interface are as follows: bit # Error 0 Packet is longer than 1518 octets 1 Packet is shorter than 64 octets 2 Packet experienced a CRC or Alignment error For example, an Ethernet fragment would have a value of 6 (2^1 + 2^2). As this MIB is expanded to new media types, this object will have other media-specific errors defined. For the purposes of this status matching algorithm, if the packet status is longer than this object, filterPktStatus this object is conceptually extended with '0' bits until it reaches the size of the packet status. This object may not be modified if the associated filterStatus object is equal to valid(1)." ::= { filterEntry 7 } filterPktStatusMask OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The mask that is applied to the status match process. Only those bits in the received packet that correspond to bits set in this mask are relevant for further processing by the status match algorithm. For the purposes of the matching algorithm, if the associated filterPktStatus object is longer than this mask, this mask is conceptually extended with '1' bits until it reaches the size of the filterPktStatus. In addition, if a packet status is longer than this mask, this mask is conceptually extended with '0' bits until it reaches the size of the packet status. This object may not be modified if the associated filterStatus object is equal to valid(1)." ::= { filterEntry 8 } filterPktStatusNotMask OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The inversion mask that is applied to the status match process. Those relevant bits in the received packet status that correspond to bits cleared in this mask must all be equal to their corresponding bits in the filterPktStatus object for the packet to be accepted. In addition, at least one of those relevant bits in the received packet status that correspond to bits set in this mask must be different to its corresponding bit in the filterPktStatus object for the packet to be accepted. For the purposes of the matching algorithm, if the associated filterPktStatus object or a packet status is longer than this mask, this mask is conceptually extended with '0' bits until it reaches the longer of the lengths of the filterPktStatus object and the packet status. This object may not be modified if the associated filterStatus object is equal to valid(1)." ::= { filterEntry 9 } filterOwner OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The entity that configured this entry and is therefore using the resources assigned to it." ::= { filterEntry 10 } filterStatus OBJECT-TYPE SYNTAX EntryStatus ACCESS read-write STATUS mandatory DESCRIPTION "The status of this filter entry." ::= { filterEntry 11 } channelTable OBJECT-TYPE SYNTAX SEQUENCE OF ChannelEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of packet channel entries." ::= { filter 2 } channelEntry OBJECT-TYPE SYNTAX ChannelEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A set of parameters for a packet channel applied on a particular interface." INDEX { channelIndex } ::= { channelTable 1 } ChannelEntry ::= SEQUENCE { channelIndex INTEGER (1..65535), channelIfIndex INTEGER (1..65535), channelAcceptType INTEGER, channelDataControl INTEGER, channelTurnOnEventIndex INTEGER (0..65535), channelTurnOffEventIndex INTEGER (0..65535), channelEventIndex INTEGER (0..65535), channelEventStatus INTEGER, channelMatches Counter, channelDescription DisplayString (SIZE (0..127)), channelOwner DisplayString, channelStatus EntryStatus } channelIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "An index that uniquely identifies an entry in the channel table. Each such entry defines one channel, a logical data and event stream." ::= { channelEntry 1 } channelIfIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object uniquely identifies the interface on this remote network monitoring device to which the associated filters are applied to allow data into this channel. The interface identified by a particular value of this object is the same interface as identified by the same value of the ifIndex object, defined in [4,6]. The filters in this group are applied to all packets on the local network segment attached to the identified interface. This object may not be modified if the associated channelStatus object is equal to valid(1)." ::= { channelEntry 2 } channelAcceptType OBJECT-TYPE SYNTAX INTEGER { acceptMatched(1), acceptFailed(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object controls the action of the filters associated with this channel. If this object is equal to acceptMatched(1), packets will be accepted to this channel if they are accepted by both the packet data and packet status matches of an associated filter. If this object is equal to acceptFailed(2), packets will be accepted to this channel only if they fail either the packet data match or the packet status match of each of the associated filters. This object may not be modified if the associated channelStatus object is equal to valid(1)." ::= { channelEntry 3 } channelDataControl OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object controls the flow of data through this channel. If this object is on(1), data, status and events flow through this channel. If this object is off(2), data, status and events will not flow through this channel." DEFVAL { off } ::= { channelEntry 4 } channelTurnOnEventIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object identifies the event that is configured to turn the associated channelDataControl from off to on when the event is generated. The event identified by a particular value of this object is the same event as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In fact, if no event is intended for this channel, channelTurnOnEventIndex must be set to zero, a non-existent event index. This object may not be modified if the associated channelStatus object is equal to valid(1)." ::= { channelEntry 5 } channelTurnOffEventIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object identifies the event that is configured to turn the associated channelDataControl from on to off when the event is generated. The event identified by a particular value of this object is the same event as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In fact, if no event is intended for this channel, channelTurnOffEventIndex must be set to zero, a non-existent event index. This object may not be modified if the associated channelStatus object is equal to valid(1)." ::= { channelEntry 6 } channelEventIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object identifies the event that is configured to be generated when the associated channelDataControl is on and a packet is matched. The event identified by a particular value of this object is the same event as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In fact, if no event is intended for this channel, channelEventIndex must be set to zero, a non-existent event index. This object may not be modified if the associated channelStatus object is equal to valid(1)." ::= { channelEntry 7 } channelEventStatus OBJECT-TYPE SYNTAX INTEGER { eventReady(1), eventFired(2), eventAlwaysReady(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The event status of this channel. If this channel is configured to generate events when packets are matched, a means of controlling the flow of those events is often needed. When this object is equal to eventReady(1), a single event may be generated, after which this object will be set by the probe to eventFired(2). While in the eventFired(2) state, no events will be generated until the object is modified to eventReady(1) (or eventAlwaysReady(3)). The management station can thus easily respond to a notification of an event by re-enabling this object. If the management station wishes to disable this flow control and allow events to be generated at will, this object may be set to eventAlwaysReady(3). Disabling the flow control is discouraged as it can result in high network traffic or other performance problems." DEFVAL { eventReady } ::= { channelEntry 8 } channelMatches OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times this channel has matched a packet. Note that this object is updated even when channelDataControl is set to off." ::= { channelEntry 9 } channelDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..127)) ACCESS read-write STATUS mandatory DESCRIPTION "A comment describing this channel." ::= { channelEntry 10 } channelOwner OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The entity that configured this entry and is therefore using the resources assigned to it." ::= { channelEntry 11 } channelStatus OBJECT-TYPE SYNTAX EntryStatus ACCESS read-write STATUS mandatory DESCRIPTION "The status of this channel entry." ::= { channelEntry 12 } -- The Packet Capture Group -- Implementation of the Packet Capture group is optional. -- -- The Packet Capture Group requires implementation of the -- Filter Group. -- -- The Packet Capture group allows packets to be captured -- upon a filter match. The bufferControlTable controls -- the captured packets output from a channel that is -- associated with it. The captured packets are placed -- in entries in the captureBufferTable. These entries are -- associated with the bufferControlEntry on whose behalf they -- were stored. bufferControlTable OBJECT-TYPE SYNTAX SEQUENCE OF BufferControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of buffers control entries." ::= { capture 1 } bufferControlEntry OBJECT-TYPE SYNTAX BufferControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A set of parameters that control the collection of a stream of packets that have matched filters." INDEX { bufferControlIndex } ::= { bufferControlTable 1 } BufferControlEntry ::= SEQUENCE { bufferControlIndex INTEGER (1..65535), bufferControlChannelIndex INTEGER (1..65535), bufferControlFullStatus INTEGER, bufferControlFullAction INTEGER, bufferControlCaptureSliceSize INTEGER, bufferControlDownloadSliceSize INTEGER, bufferControlDownloadOffset INTEGER, bufferControlMaxOctetsRequested INTEGER, bufferControlMaxOctetsGranted INTEGER, bufferControlCapturedPackets INTEGER, bufferControlTurnOnTime TimeTicks, bufferControlOwner DisplayString, bufferControlStatus EntryStatus } bufferControlIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "An index that uniquely identifies an entry in the bufferControl table. The value of this index shall never be zero. Each such entry defines one set of packets that is captured and controlled by one or more filters." ::= { bufferControlEntry 1 } bufferControlChannelIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "An index that identifies the channel that is the source of packets for this bufferControl table. The channel identified by a particular value of this index is the same as identified by the same value of the channelIndex object. This object may not be modified if the associated bufferControlStatus object is equal to valid(1)." ::= { bufferControlEntry 2 } bufferControlFullStatus OBJECT-TYPE SYNTAX INTEGER { spaceAvailable(1), full(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This object shows whether the buffer has room to accept new packets or if it is full. If the status is spaceAvailable(1), the buffer is accepting new packets normally. If the status is full(2) and the associated bufferControlFullAction object is wrapWhenFull, the buffer is accepting new packets by deleting enough of the oldest packets to make room for new ones as they arrive. Otherwise, if the status is full(2) and the bufferControlFullAction object is lockWhenFull, then the buffer has stopped collecting packets. When this object is set to full(2) the probe must not later set it to spaceAvailable(1) except in the case of a significant gain in resources such as an increase of bufferControlOctetsGranted. In particular, the wrap-mode action of deleting old packets to make room for newly arrived packets must not affect the value of this object." ::= { bufferControlEntry 3 } bufferControlFullAction OBJECT-TYPE SYNTAX INTEGER { lockWhenFull(1), wrapWhenFull(2) -- FIFO } ACCESS read-write STATUS mandatory DESCRIPTION "Controls the action of the buffer when it reaches the full status. When in the lockWhenFull(1) state a packet is added to the buffer that fills the buffer, the bufferControlFullStatus will be set to full(2) and this buffer will stop capturing packets." ::= { bufferControlEntry 4 } bufferControlCaptureSliceSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of octets of each packet that will be saved in this capture buffer. For example, if a 1500 octet packet is received by the probe and this object is set to 500, then only 500 octets of the packet will be stored in the associated capture buffer. If this variable is set to 0, the capture buffer will save as many octets as is possible. This object may not be modified if the associated bufferControlStatus object is equal to valid(1)." DEFVAL { 100 } ::= { bufferControlEntry 5 } bufferControlDownloadSliceSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of octets of each packet in this capture buffer that will be returned in an SNMP retrieval of that packet. For example, if 500 octets of a packet have been stored in the associated capture buffer, the associated bufferControlDownloadOffset is 0, and this object is set to 100, then the captureBufferPacket object that contains the packet will contain only the first 100 octets of the packet. A prudent manager will take into account possible interoperability or fragmentation problems that may occur if the download slice size is set too large. In particular, conformant SNMP implementations are not required to accept messages whose length exceeds 484 octets, although they are encouraged to support larger datagrams whenever feasible." DEFVAL { 100 } ::= { bufferControlEntry 6 } bufferControlDownloadOffset OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The offset of the first octet of each packet in this capture buffer that will be returned in an SNMP retrieval of that packet. For example, if 500 octets of a packet have been stored in the associated capture buffer and this object is set to 100, then the captureBufferPacket object that contains the packet will contain bytes starting 100 octets into the packet." DEFVAL { 0 } ::= { bufferControlEntry 7 } bufferControlMaxOctetsRequested OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The requested maximum number of octets to be saved in this captureBuffer, including any implementation-specific overhead. If this variable is set to -1, the capture buffer will save as many octets as is possible. When this object is created or modified, the probe should set bufferControlMaxOctetsGranted as closely to this object as is possible for the particular probe implementation and available resources. However, if the object has the special value of -1, the probe must set bufferControlMaxOctetsGranted to -1." DEFVAL { -1 } ::= { bufferControlEntry 8 } bufferControlMaxOctetsGranted OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of octets that can be saved in this captureBuffer, including overhead. If this variable is -1, the capture buffer will save as many octets as possible. When the bufferControlMaxOctetsRequested object is created or modified, the probe should set this object as closely to the requested value as is possible for the particular probe implementation and available resources. However, if the request object has the special value of -1, the probe must set this object to -1. The probe must not lower this value except as a result of a modification to the associated bufferControlMaxOctetsRequested object. When this maximum number of octets is reached and a new packet is to be added to this capture buffer and the corresponding bufferControlFullAction is set to wrapWhenFull(2), enough of the oldest packets associated with this capture buffer shall be deleted by the agent so that the new packet can be added. If the corresponding bufferControlFullAction is set to lockWhenFull(1), the new packet shall be discarded. In either case, the probe must set bufferControlFullStatus to full(2). When the value of this object changes to a value less than the current value, entries are deleted from the captureBufferTable associated with this bufferControlEntry. Enough of the oldest of these captureBufferEntries shall be deleted by the agent so that the number of octets used remains less than or equal to the new value of this object. When the value of this object changes to a value greater than the current value, the number of associated captureBufferEntries may be allowed to grow." ::= { bufferControlEntry 9 } bufferControlCapturedPackets OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets currently in this captureBuffer." ::= { bufferControlEntry 10 } bufferControlTurnOnTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime when this capture buffer was first turned on." ::= { bufferControlEntry 11 } bufferControlOwner OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The entity that configured this entry and is therefore using the resources assigned to it." ::= { bufferControlEntry 12 } bufferControlStatus OBJECT-TYPE SYNTAX EntryStatus ACCESS read-write STATUS mandatory DESCRIPTION "The status of this buffer Control Entry." ::= { bufferControlEntry 13 } captureBufferTable OBJECT-TYPE SYNTAX SEQUENCE OF CaptureBufferEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of packets captured off of a channel." ::= { capture 2 } captureBufferEntry OBJECT-TYPE SYNTAX CaptureBufferEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A packet captured off of an attached network." INDEX { captureBufferControlIndex, captureBufferIndex } ::= { captureBufferTable 1 } CaptureBufferEntry ::= SEQUENCE { captureBufferControlIndex INTEGER (1..65535), captureBufferIndex INTEGER, captureBufferPacketID INTEGER, captureBufferPacketData OCTET STRING, captureBufferPacketLength INTEGER, captureBufferPacketTime INTEGER, captureBufferPacketStatus INTEGER } captureBufferControlIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The index of the bufferControlEntry with which this packet is associated." ::= { captureBufferEntry 1 } captureBufferIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An index that uniquely identifies an entry in the captureBuffer table associated with a particular bufferControlEntry. This index will start at 1 and increase by one for each new packet added with the same captureBufferControlIndex." ::= { captureBufferEntry 2 } captureBufferPacketID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An index that describes the order of packets that are received on a particular interface. The packetID of a packet captured on an interface is defined to be greater than the packetID's of all packets captured previously on the same interface. As the captureBufferPacketID object has a maximum positive value of 2^31 - 1, any captureBufferPacketID object shall have the value of the associated packet's packetID mod 2^31." ::= { captureBufferEntry 3 } captureBufferPacketData OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The data inside the packet, starting at the beginning of the packet plus any offset specified in the associated bufferControlDownloadOffset, including any link level headers. The length of the data in this object is the minimum of the length of the captured packet minus the offset, the length of the associated bufferControlCaptureSliceSize minus the offset, and the associated bufferControlDownloadSliceSize. If this minimum is less than zero, this object shall have a length of zero." ::= { captureBufferEntry 4 } captureBufferPacketLength OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The actual length (off the wire) of the packet stored in this entry, including FCS octets." ::= { captureBufferEntry 5 } captureBufferPacketTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of milliseconds that had passed since this capture buffer was first turned on when this packet was captured." ::= { captureBufferEntry 6 } captureBufferPacketStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A value which indicates the error status of this packet. The value of this object is defined in the same way as filterPacketStatus. The value is a sum. This sum initially takes the value zero. Then, for each error, E, that has been discovered in this packet, 2 raised to a value representing E is added to the sum. The errors defined for a packet captured off of an Ethernet interface are as follows: bit # Error 0 Packet is longer than 1518 octets 1 Packet is shorter than 64 octets 2 Packet experienced a CRC or Alignment error 3 First packet in this capture buffer after it was detected that some packets were not processed correctly. For example, an Ethernet fragment would have a value of 6 (2^1 + 2^2). As this MIB is expanded to new media types, this object will have other media-specific errors defined." ::= { captureBufferEntry 7 } -- The Event Group -- Implementation of the Event group is optional. -- -- The Event group controls the generation and notification -- of events from this device. Each entry in the eventTable -- describes the parameters of the event that can be triggered. -- Each event entry is fired by an associated condition located -- elsewhere in the MIB. An event entry may also be associated -- with a function elsewhere in the MIB that will be executed -- when the event is generated. For example, a channel may -- be turned on or off by the firing of an event. -- -- Each eventEntry may optionally specify that a log entry -- be created on its behalf whenever the event occurs. -- Each entry may also specify that notification should -- occur by way of SNMP trap messages. In this case, the -- community for the trap message is given in the associated -- eventCommunity object. The enterprise and specific trap -- fields of the trap are determined by the condition that -- triggered the event. Three traps are defined in a companion -- document: risingAlarm, fallingAlarm, and packetMatch. -- If the eventTable is triggered by a condition specified -- elsewhere, the enterprise and specific trap fields -- must be specified for traps generated for that condition. eventTable OBJECT-TYPE SYNTAX SEQUENCE OF EventEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of events to be generated." ::= { event 1 } eventEntry OBJECT-TYPE SYNTAX EventEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A set of parameters that describe an event to be generated when certain conditions are met." INDEX { eventIndex } ::= { eventTable 1 } EventEntry ::= SEQUENCE { eventIndex INTEGER (1..65535), eventDescription DisplayString (SIZE (0..127)), eventType INTEGER, eventCommunity DisplayString, eventLastTimeSent TimeTicks, eventOwner DisplayString, eventStatus EntryStatus } eventIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "An index that uniquely identifies an entry in the event table. Each such entry defines one event that is to be generated when the appropriate conditions occur." ::= { eventEntry 1 } eventDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..127)) ACCESS read-write STATUS mandatory DESCRIPTION "A comment describing this event entry." ::= { eventEntry 2 } eventType OBJECT-TYPE SYNTAX INTEGER { none(1), log(2), snmp-trap(3), -- send an SNMP trap log-and-trap(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of notification that the probe will make about this event. In the case of log, an entry is made in the log table for each event. In the case of snmp-trap, an SNMP trap is sent to one or more management stations." ::= { eventEntry 3 } eventCommunity OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "If an SNMP trap is to be sent, it will be sent to the SNMP community specified by this octet string. In the future this table will be extended to include the party security mechanism. This object shall be set to a string of length zero if it is intended that that mechanism be used to specify the destination of the trap." ::= { eventEntry 4 } eventLastTimeSent OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime at the time this event entry last generated an event. If this entry has not generated any events, this value will be zero." ::= { eventEntry 5 } eventOwner OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The entity that configured this entry and is therefore using the resources assigned to it. If this object contains a string starting with 'monitor' and has associated entries in the log table, all connected management stations should retrieve those log entries, as they may have significance to all management stations connected to this device" ::= { eventEntry 6 } eventStatus OBJECT-TYPE SYNTAX EntryStatus ACCESS read-write STATUS mandatory DESCRIPTION "The status of this event entry. If this object is not equal to valid(1), all associated log entries shall be deleted by the agent." ::= { eventEntry 7 } -- logTable OBJECT-TYPE SYNTAX SEQUENCE OF LogEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of events that have been logged." ::= { event 2 } logEntry OBJECT-TYPE SYNTAX LogEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A set of data describing an event that has been logged." INDEX { logEventIndex, logIndex } ::= { logTable 1 } LogEntry ::= SEQUENCE { logEventIndex INTEGER (1..65535), logIndex INTEGER, logTime TimeTicks, logDescription DisplayString (SIZE (0..255)) } logEventIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The event entry that generated this log entry. The log identified by a particular value of this index is associated with the same eventEntry as identified by the same value of eventIndex." ::= { logEntry 1 } logIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An index that uniquely identifies an entry in the log table amongst those generated by the same eventEntries. These indexes are assigned beginning with 1 and increase by one with each new log entry. The association between values of logIndex and logEntries is fixed for the lifetime of each logEntry. The agent may choose to delete the oldest instances of logEntry as required because of lack of memory. It is an implementation-specific matter as to when this deletion may occur." ::= { logEntry 2 } logTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime when this log entry was created." ::= { logEntry 3 } logDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "An implementation dependent description of the event that activated this log entry." ::= { logEntry 4 } END RFC1271-TRAPS DEFINITIONS ::= BEGIN IMPORTS TRAP-TYPE FROM RFC-1215 rmon, alarmIndex, alarmVariable, alarmSampleType, alarmValue, alarmRisingThreshold, alarmFallingThreshold, channelIndex, channelMatches, channelDescription FROM RFC1271-MIB; risingAlarm TRAP-TYPE ENTERPRISE rmon VARIABLES { alarmIndex, alarmVariable, alarmSampleType, alarmValue, alarmRisingThreshold } DESCRIPTION "The SNMP trap that is generated when an alarm entry crosses its rising threshold and generates an event that is configured for sending SNMP traps." ::= 1 fallingAlarm TRAP-TYPE ENTERPRISE rmon VARIABLES { alarmIndex, alarmVariable, alarmSampleType, alarmValue, alarmFallingThreshold } DESCRIPTION "The SNMP trap that is generated when an alarm entry crosses its fallingthreshold and generates an event that is configured for sending SNMP traps." ::= 2 packetMatch TRAP-TYPE ENTERPRISE rmon VARIABLES { channelIndex, channelMatches, channelDescription } DESCRIPTION "The SNMP trap that is generated when a packet is captured by a channel that is configured for sending SNMP traps." ::= 3 END RFC1389-MIB DEFINITIONS ::= BEGIN IMPORTS Counter, TimeTicks, IpAddress FROM RFC1155-SMI mib-2 FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212; -- RIP-2 Management Information Base rip2 OBJECT IDENTIFIER ::= { mib-2 23 } -- the RouteTag type represents the contents of the -- Route Tag field in the packet header or route entry. RouteTag ::= OCTET STRING (SIZE (2)) -- the Validation type is used for the variable that deletes -- an entry from a table, and ALWAYS takes at least these values: Validation ::= INTEGER { valid (1), invalid (2) } -- The RIP-2 Globals Group. -- Implementation of this group is mandatory for systems that -- implement RIP-2. -- These counters are intended to facilitate debugging quickly -- changing routes or failing neighbors rip2GlobalGroup OBJECT IDENTIFIER ::= { rip2 1 } rip2GlobalRouteChanges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of changes made to the IP Route Da- tabase by RIP." ::= { rip2GlobalGroup 1 } rip2GlobalQueries OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of responses sent to RIP queries from other systems." ::= { rip2GlobalGroup 2 } -- RIP Interfaces Groups -- Implementation of these Groups is mandatory for systems that -- implement RIP-2. -- Since RIP versions 1 and 2 do not deal with addressless links, -- it is assumed that RIP "interfaces" are subnets within a -- routing domain. -- The RIP Interface Status Table. rip2IfStatTable OBJECT-TYPE SYNTAX SEQUENCE OF Rip2IfStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of subnets which require separate status monitoring in RIP." ::= { rip2 2 } rip2IfStatEntry OBJECT-TYPE SYNTAX Rip2IfStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A Single Routing Domain in a single Subnet." INDEX { rip2IfStatAddress } ::= { rip2IfStatTable 1 } Rip2IfStatEntry ::= SEQUENCE { rip2IfStatAddress IpAddress, rip2IfStatRcvBadPackets Counter, rip2IfStatRcvBadRoutes Counter, rip2IfStatSentUpdates Counter, rip2IfStatStatus Validation } rip2IfStatAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP Address of this system on the indicated subnet." ::= { rip2IfStatEntry 1 } rip2IfStatRcvBadPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of RIP response packets received by the RIP process which were subsequently dis- carded for any reason (e.g. a version 0 packet, or an unknown command type)." ::= { rip2IfStatEntry 2 } rip2IfStatRcvBadRoutes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of routes, in valid RIP packets, which were ignored for any reason (e.g. unknown address family, or invalid metric)." ::= { rip2IfStatEntry 3 } rip2IfStatSentUpdates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of triggered RIP updates actually sent on this interface. This explicitly does NOT include full updates sent containing new information." ::= { rip2IfStatEntry 4 } rip2IfStatStatus OBJECT-TYPE SYNTAX Validation ACCESS read-write STATUS mandatory DESCRIPTION "Writing invalid has the effect of deleting this interface." DEFVAL { valid } ::= { rip2IfStatEntry 5 } -- The RIP Interface Configuration Table. rip2IfConfTable OBJECT-TYPE SYNTAX SEQUENCE OF Rip2IfConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of subnets which require separate con- figuration in RIP." ::= { rip2 3 } rip2IfConfEntry OBJECT-TYPE SYNTAX Rip2IfConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A Single Routing Domain in a single Subnet." INDEX { rip2IfConfAddress } ::= { rip2IfConfTable 1 } Rip2IfConfEntry ::= SEQUENCE { rip2IfConfAddress IpAddress, rip2IfConfDomain RouteTag, rip2IfConfAuthType INTEGER, rip2IfConfAuthKey OCTET STRING (SIZE(0..16)), rip2IfConfSend INTEGER, rip2IfConfReceive INTEGER, rip2IfConfDefaultMetric INTEGER, rip2IfConfStatus Validation } rip2IfConfAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP Address of this system on the indicated subnet." ::= { rip2IfConfEntry 1 } rip2IfConfDomain OBJECT-TYPE SYNTAX RouteTag ACCESS read-write STATUS mandatory DESCRIPTION "Value inserted into the Routing Domain field of all RIP packets sent on this interface." DEFVAL { '0000'h } ::= { rip2IfConfEntry 2 } rip2IfConfAuthType OBJECT-TYPE SYNTAX INTEGER { noAuthentication (1), simplePassword (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of Authentication used on this inter- face." DEFVAL { noAuthentication } ::= { rip2IfConfEntry 3 } rip2IfConfAuthKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "The value to be used as the Authentication Key whenever the corresponding instance of rip2IfConfAuthType has the value simplePass- word. A modification of the corresponding in- stance of rip2IfConfAuthType does not modify the rip2IfConfAuthKey value. If a string shorter than 16 octets is supplied, it will be left-justified and padded to 16 oc- tets, on the right, with nulls (0x00). Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object." DEFVAL { ''h } ::= { rip2IfConfEntry 4 } rip2IfConfSend OBJECT-TYPE SYNTAX INTEGER { doNotSend (1), ripVersion1 (2), rip1Compatible (3), ripVersion2 (4) } ACCESS read-write STATUS mandatory DESCRIPTION "What the router sends on this interface. ripVersion1 implies sending RIP updates compli- ant with RFC 1058. rip1Compatible implies broadcasting RIP-2 updates using RFC 1058 route subsumption rules. ripVersion2 implies multi- casting RIP-2 updates." DEFVAL { rip1Compatible } ::= { rip2IfConfEntry 5 } rip2IfConfReceive OBJECT-TYPE SYNTAX INTEGER { rip1 (1), rip2 (2), rip1OrRip2 (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This indicates which version of RIP updates are to be accepted. Note that rip2 and rip1OrRip2 implies reception of multicast pack- ets." DEFVAL { rip1OrRip2 } ::= { rip2IfConfEntry 6 } rip2IfConfDefaultMetric OBJECT-TYPE SYNTAX INTEGER ( 0..15 ) ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates what metric is to be used as a default route in RIP updates ori- ginated on this interface. A value of zero in- dicates that no default route should be ori- ginated; in this case, a default route via another router may be propagated." ::= { rip2IfConfEntry 7 } rip2IfConfStatus OBJECT-TYPE SYNTAX Validation ACCESS read-write STATUS mandatory DESCRIPTION "Writing invalid has the effect of deleting this interface." DEFVAL { valid } ::= { rip2IfConfEntry 8 } -- Peer Table -- The RIP Peer Group -- Implementation of this Group is Optional -- This group provides information about active peer -- relationships intended to assist in debugging. rip2PeerTable OBJECT-TYPE SYNTAX SEQUENCE OF Rip2PeerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of RIP Peers." ::= { rip2 4 } rip2PeerEntry OBJECT-TYPE SYNTAX Rip2PeerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information regarding a single routing peer." INDEX { rip2PeerAddress, rip2PeerDomain } ::= { rip2PeerTable 1 } Rip2PeerEntry ::= SEQUENCE { rip2PeerAddress IpAddress, rip2PeerDomain RouteTag, rip2PeerLastUpdate TimeTicks, rip2PeerVersion INTEGER, rip2PeerRcvBadPackets Counter, rip2PeerRcvBadRoutes Counter } rip2PeerAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP Address of the Peer System." ::= { rip2PeerEntry 1 } rip2PeerDomain OBJECT-TYPE SYNTAX RouteTag ACCESS read-only STATUS mandatory DESCRIPTION "The value in the Routing Domain field in RIP packets received from the peer." ::= { rip2PeerEntry 2 } rip2PeerLastUpdate OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime when the most recent RIP update was received from this system." ::= { rip2PeerEntry 3 } rip2PeerVersion OBJECT-TYPE SYNTAX INTEGER ( 0..255 ) ACCESS read-only STATUS mandatory DESCRIPTION "The RIP version number in the header of the last RIP packet received." ::= { rip2PeerEntry 4 } rip2PeerRcvBadPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of RIP response packets from this peer discarded as invalid." ::= { rip2PeerEntry 5 } rip2PeerRcvBadRoutes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of routes from this peer that were ignored because the entry format was invalid." ::= { rip2PeerEntry 6 } END PPP-LCP-MIB DEFINITIONS ::= BEGIN IMPORTS Counter FROM RFC1155-SMI ifIndex, transmission FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212; -- PPP MIB ppp OBJECT IDENTIFIER ::= { transmission 23 } pppLcp OBJECT IDENTIFIER ::= { ppp 1 } -- The individual groups within the PPP-LCP-MIB pppLink OBJECT IDENTIFIER ::= { pppLcp 1 } pppLqr OBJECT IDENTIFIER ::= { pppLcp 2 } pppTests OBJECT IDENTIFIER ::= { pppLcp 3 } -- 4.1. PPP Link Group -- -- The PPP Link Group. Implementation of this -- group is mandatory for all PPP entities. -- -- The following object reflect the values of the option -- parameters used in the PPP Link Control Protocol -- pppLinkStatusLocalMRU -- pppLinkStatusRemoteMRU -- pppLinkStatusLocalToPeerACCMap -- pppLinkStatusPeerToLocalACCMap -- pppLinkStatusLocalToRemoteProtocolCompression -- pppLinkStatusRemoteToLocalProtocolCompression -- pppLinkStatusLocalToRemoteACCompression -- pppLinkStatusRemoteToLocalACCompression -- pppLinkStatusTransmitFcsSize -- pppLinkStatusReceiveFcsSize -- -- These values are not available until after the PPP Option -- negotiation has completed, which is indicated by the link -- reaching the open state (i.e., ifOperStatus is set to -- up). -- -- Therefore, when ifOperStatus is not up -- the contents of these objects is undefined. The value -- returned when accessing the objects is an implementation -- dependent issue. pppLinkStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF PppLinkStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table containing PPP-link specific variables for this PPP implementation." ::= { pppLink 1 } pppLinkStatusEntry OBJECT-TYPE SYNTAX PppLinkStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Management information about a particular PPP Link." INDEX { ifIndex } ::= { pppLinkStatusTable 1 } PppLinkStatusEntry ::= SEQUENCE { pppLinkStatusPhysicalIndex INTEGER, pppLinkStatusBadAddresses Counter, pppLinkStatusBadControls Counter, pppLinkStatusPacketTooLongs Counter, pppLinkStatusBadFCSs Counter, pppLinkStatusLocalMRU INTEGER, pppLinkStatusRemoteMRU INTEGER, pppLinkStatusLocalToPeerACCMap OCTET STRING, pppLinkStatusPeerToLocalACCMap OCTET STRING, pppLinkStatusLocalToRemoteProtocolCompression INTEGER, pppLinkStatusRemoteToLocalProtocolCompression INTEGER, pppLinkStatusLocalToRemoteACCompression INTEGER, pppLinkStatusRemoteToLocalACCompression INTEGER, pppLinkStatusTransmitFcsSize INTEGER, pppLinkStatusReceiveFcsSize INTEGER } pppLinkStatusPhysicalIndex OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The value of ifIndex that identifies the lower-level interface over which this PPP Link is operating. This interface would usually be an HDLC or RS-232 type of interface. If there is no lower-layer interface element, or there is no ifEntry for the element, or the element can not be identified, then the value of this object is 0. For example, suppose that PPP is operating over a serial port. This would use two entries in the ifTable. The PPP could be running over `interface' number 123 and the serial port could be running over `interface' number 987. Therefore, ifSpecific.123 would contain the OBJECT IDENTIFIER ppp pppLinkStatusPhysicalIndex.123 would contain 987, and ifSpecific.987 would contain the OBJECT IDENTIFIER for the serial-port's media- specific MIB." ::= { pppLinkStatusEntry 1 } pppLinkStatusBadAddresses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets received with an incorrect Address Field. This counter is a component of the ifInErrors variable that is associated with the interface that represents this PPP Link." REFERENCE "Section 3.1, Address Field, of RFC1331." ::= { pppLinkStatusEntry 2 } pppLinkStatusBadControls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets received on this link with an incorrect Control Field. This counter is a component of the ifInErrors variable that is associated with the interface that represents this PPP Link." REFERENCE "Section 3.1, Control Field, of RFC1331." ::= { pppLinkStatusEntry 3 } pppLinkStatusPacketTooLongs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of received packets that have been discarded because their length exceeded the MRU. This counter is a component of the ifInErrors variable that is associated with the interface that represents this PPP Link. NOTE, packets which are longer than the MRU but which are successfully received and processed are NOT included in this count." ::= { pppLinkStatusEntry 4 } pppLinkStatusBadFCSs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of received packets that have been discarded due to having an incorrect FCS. This counter is a component of the ifInErrors variable that is associated with the interface that represents this PPP Link." ::= { pppLinkStatusEntry 5 } pppLinkStatusLocalMRU OBJECT-TYPE SYNTAX INTEGER(1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The current value of the MRU for the local PPP Entity. This value is the MRU that the remote entity is using when sending packets to the local PPP entity. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up)." ::= { pppLinkStatusEntry 6 } pppLinkStatusRemoteMRU OBJECT-TYPE SYNTAX INTEGER(1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The current value of the MRU for the remote PPP Entity. This value is the MRU that the local entity is using when sending packets to the remote PPP entity. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up)." ::= { pppLinkStatusEntry 7 } pppLinkStatusLocalToPeerACCMap OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) ACCESS read-only STATUS mandatory DESCRIPTION "The current value of the ACC Map used for sending packets from the local PPP entity to the remote PPP entity. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up)." ::= { pppLinkStatusEntry 8 } pppLinkStatusPeerToLocalACCMap OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) ACCESS read-only STATUS mandatory DESCRIPTION "The ACC Map used by the remote PPP entity when transmitting packets to the local PPP entity. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up)." ::= { pppLinkStatusEntry 9 } pppLinkStatusLocalToRemoteProtocolCompression OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the local PPP entity will use Protocol Compression when transmitting packets to the remote PPP entity. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up)." ::= { pppLinkStatusEntry 10 } pppLinkStatusRemoteToLocalProtocolCompression OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the remote PPP entity will use Protocol Compression when transmitting packets to the local PPP entity. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up)." ::= { pppLinkStatusEntry 11 } pppLinkStatusLocalToRemoteACCompression OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the local PPP entity will use Address and Control Compression when transmitting packets to the remote PPP entity. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up)." ::= { pppLinkStatusEntry 12 } pppLinkStatusRemoteToLocalACCompression OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the remote PPP entity will use Address and Control Compression when transmitting packets to the local PPP entity. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up)." ::= { pppLinkStatusEntry 13 } pppLinkStatusTransmitFcsSize OBJECT-TYPE SYNTAX INTEGER (0..128) ACCESS read-only STATUS mandatory DESCRIPTION "The size of the Frame Check Sequence (FCS) in bits that the local node will generate when sending packets to the remote node. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up)." ::= { pppLinkStatusEntry 14 } pppLinkStatusReceiveFcsSize OBJECT-TYPE SYNTAX INTEGER (0..128) ACCESS read-only STATUS mandatory DESCRIPTION "The size of the Frame Check Sequence (FCS) in bits that the remote node will generate when sending packets to the local node. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up)." ::= { pppLinkStatusEntry 15 } pppLinkConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF PppLinkConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table containing the LCP configuration parameters for this PPP Link. These variables represent the initial configuration of the PPP Link. The actual values of the parameters may be changed when the link is brought up via the LCP options negotiation mechanism." ::= { pppLink 2 } pppLinkConfigEntry OBJECT-TYPE SYNTAX PppLinkConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Configuration information about a particular PPP Link." INDEX { ifIndex } ::= { pppLinkConfigTable 1 } PppLinkConfigEntry ::= SEQUENCE { pppLinkConfigInitialMRU INTEGER, pppLinkConfigReceiveACCMap OCTET STRING, pppLinkConfigTransmitACCMap OCTET STRING, pppLinkConfigMagicNumber INTEGER, pppLinkConfigFcsSize INTEGER } pppLinkConfigInitialMRU OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The initial Maximum Receive Unit (MRU) that the local PPP entity will advertise to the remote entity. If the value of this variable is 0 then the local PPP entity will not advertise any MRU to the remote entity and the default MRU will be assumed. Changing this object will have effect when the link is next restarted." REFERENCE "Section 7.2, Maximum Receive Unit of RFC1331." DEFVAL { 1500 } ::= { pppLinkConfigEntry 1 } pppLinkConfigReceiveACCMap OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) ACCESS read-write STATUS mandatory DESCRIPTION "The Asynchronous-Control-Character-Map (ACC) that the local PPP entity requires for use on its receive side. In effect, this is the ACC Map that is required in order to ensure that the local modem will successfully receive all characters. The actual ACC map used on the receive side of the link will be a combination of the local node's pppLinkConfigReceiveACCMap and the remote node's pppLinkConfigTransmitACCMap. Changing this object will have effect when the link is next restarted." REFERENCE "Section 7.3, page 4, Async-Control-Character- Map of RFC1331." DEFVAL { 'ffffffff'h } ::= { pppLinkConfigEntry 2 } pppLinkConfigTransmitACCMap OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) ACCESS read-write STATUS mandatory DESCRIPTION "The Asynchronous-Control-Character-Map (ACC) that the local PPP entity requires for use on its transmit side. In effect, this is the ACC Map that is required in order to ensure that all characters can be successfully transmitted through the local modem. The actual ACC map used on the transmit side of the link will be a combination of the local node's pppLinkConfigTransmitACCMap and the remote node's pppLinkConfigReceiveACCMap. Changing this object will have effect when the link is next restarted." REFERENCE "Section 7.3, page 4, Async-Control-Character- Map of RFC1331." DEFVAL { 'ffffffff'h } ::= { pppLinkConfigEntry 3 } pppLinkConfigMagicNumber OBJECT-TYPE SYNTAX INTEGER {false (1), true (2)} ACCESS read-write STATUS mandatory DESCRIPTION "If true(2) then the local node will attempt to perform Magic Number negotiation with the remote node. If false(1) then this negotiation is not performed. In any event, the local node will comply with any magic number negotiations attempted by the remote node, per the PPP specification. Changing this object will have effect when the link is next restarted." REFERENCE "Section 7.6, Magic Number, of RFC1331." DEFVAL { false } ::= { pppLinkConfigEntry 4 } pppLinkConfigFcsSize OBJECT-TYPE SYNTAX INTEGER (0..128) ACCESS read-write STATUS mandatory DESCRIPTION "The size of the FCS, in bits, the local node will attempt to negotiate for use with the remote node. Regardless of the value of this object, the local node will comply with any FCS size negotiations initiated by the remote node, per the PPP specification. Changing this object will have effect when the link is next restarted." DEFVAL { 16 } ::= { pppLinkConfigEntry 5 } -- 4.2. PPP LQR Group -- -- The PPP LQR Group. -- Implementation of this group is mandatory for all -- PPP implementations that implement LQR. -- pppLqrTable OBJECT-TYPE SYNTAX SEQUENCE OF PppLqrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the LQR parameters and statistics for the local PPP entity." ::= { pppLqr 1 } pppLqrEntry OBJECT-TYPE SYNTAX PppLqrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "LQR information for a particular PPP link. A PPP link will have an entry in this table if and only if LQR Quality Monitoring has been successfully negotiated for said link." INDEX { ifIndex } ::= { pppLqrTable 1 } PppLqrEntry ::= SEQUENCE { pppLqrQuality INTEGER, pppLqrInGoodOctets Counter, pppLqrLocalPeriod INTEGER, pppLqrRemotePeriod INTEGER, pppLqrOutLQRs Counter, pppLqrInLQRs Counter } pppLqrQuality OBJECT-TYPE SYNTAX INTEGER { good(1), bad(2), not-determined(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current quality of the link as declared by the local PPP entity's Link-Quality Management modules. No effort is made to define good or bad, nor the policy used to determine it. The not-determined value indicates that the entity does not actually evaluate the link's quality. This value is used to disambiguate the `determined to be good' case from the `no determination made and presumed to be good' case." ::= { pppLqrEntry 1 } pppLqrInGoodOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The LQR InGoodOctets counter for this link." REFERENCE "Section 2.2, Counters, of RFC1333." ::= { pppLqrEntry 2 } pppLqrLocalPeriod OBJECT-TYPE SYNTAX INTEGER(1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The LQR reporting period, in hundredths of a second that is in effect for the local PPP entity." REFERENCE "Section 2.5, Configuration Option Format, of RFC1333." ::= { pppLqrEntry 3 } pppLqrRemotePeriod OBJECT-TYPE SYNTAX INTEGER(1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The LQR reporting period, in hundredths of a second, that is in effect for the remote PPP entity." REFERENCE "Section 2.5, Configuration Option Format, of RFC1333." ::= { pppLqrEntry 4 } pppLqrOutLQRs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The value of the OutLQRs counter on the local node for the link identified by ifIndex." REFERENCE "Section 2.2, Counters, of RFC1333." ::= { pppLqrEntry 5 } pppLqrInLQRs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The value of the InLQRs counter on the local node for the link identified by ifIndex." REFERENCE "Section 2.2, Counters, of RFC1333." ::= { pppLqrEntry 6 } -- -- The PPP LQR Configuration table. -- pppLqrConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF PppLqrConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the LQR Configuration parameters for the local PPP entity." ::= { pppLqr 2 } pppLqrConfigEntry OBJECT-TYPE SYNTAX PppLqrConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "LQR configuration information for a particular PPP link." INDEX { ifIndex } ::= { pppLqrConfigTable 1 } PppLqrConfigEntry ::= SEQUENCE { pppLqrConfigPeriod INTEGER, pppLqrConfigStatus INTEGER } pppLqrConfigPeriod OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The LQR Reporting Period that the local PPP entity will attempt to negotiate with the remote entity, in units of hundredths of a second. Changing this object will have effect when the link is next restarted." REFERENCE "Section 2.5, Configuration Option Format, of RFC1333." DEFVAL { 0 } ::= { pppLqrConfigEntry 1 } pppLqrConfigStatus OBJECT-TYPE SYNTAX INTEGER {disabled (1), enabled (2)} ACCESS read-write STATUS mandatory DESCRIPTION "If enabled(2) then the local node will attempt to perform LQR negotiation with the remote node. If disabled(1) then this negotiation is not performed. In any event, the local node will comply with any magic number negotiations attempted by the remote node, per the PPP specification. Changing this object will have effect when the link is next restarted. Setting this object to the value disabled(1) has the effect of invalidating the corresponding entry in the pppLqrConfigTable object. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use." REFERENCE "Section 7.6, Magic Number, of RFC1331." DEFVAL { enabled } ::= { pppLqrConfigEntry 2 } -- 4.3. PPP LQR Extensions Group -- -- The PPP LQR Extensions Group. -- Implementation of this group is optional. -- -- The intent of this group is to allow external -- implementation of the policy mechanisms that -- are used to declare a link to be "bad" or not. -- -- It is not practical to examine the MIB objects -- which are used to generate LQR packets since -- LQR policies tend to require synchronization of -- the values of all data used to determine Link -- Quality; i.e. the values of the relevant counters -- must all be taken at the same instant in time. -- pppLqrExtnsTable OBJECT-TYPE SYNTAX SEQUENCE OF PppLqrExtnsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing additional LQR information for the local PPP entity." ::= { pppLqr 3 } pppLqrExtnsEntry OBJECT-TYPE SYNTAX PppLqrExtnsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Extended LQR information for a particular PPP link. Assuming that this group has been implemented, a PPP link will have an entry in this table if and only if LQR Quality Monitoring has been successfully negotiated for said link." INDEX { ifIndex } ::= { pppLqrExtnsTable 1 } PppLqrExtnsEntry ::= SEQUENCE { pppLqrExtnsLastReceivedLqrPacket OCTET STRING(SIZE(68)) } pppLqrExtnsLastReceivedLqrPacket OBJECT-TYPE SYNTAX OCTET STRING(SIZE(68)) ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the most recently received LQR packet. The format of the packet is as described in the LQM Protocol specificiation. All fields of the packet, including the `save' fields, are stored in this object. The LQR packet is stored in network byte order. The LAP-B and PPP headers are not stored in this object; the first four octets of this variable contain the Magic-Number field, the second four octets contain the LastOutLQRs field and so on. The last four octets of this object contain the SaveInOctets field of the LQR packet." REFERENCE "Section 2.6, Packet Format, of RFC1333" ::= { pppLqrExtnsEntry 1 } -- 4.4. PPP Tests -- The extensions to the interface table in RFC1229 define a -- table through which the network manager can instruct the -- managed object to perform various tests of the interface. This -- is the ifExtnsTestTable. -- The PPP MIB defines two such tests. -- 4.4.1. PPP Echo Test -- The PPP Echo Test is defined as pppEchoTest OBJECT IDENTIFIER ::= { pppTests 1 } -- Invoking this test causes a PPP Echo Packet to be sent on the -- line. ifExtnsTestResult returns success(2) if the echo -- response came back properly. It returns failed(7) if the -- response did not properly return. The definition of "proper" -- in this context is left to the discretion of the implementor. -- 4.4.2. PPP Discard Test -- The PPP Discard Test is defined as pppDiscardTest OBJECT IDENTIFIER ::= { pppTests 2 } -- Invoking this test causes a PPP Discard Packet to be sent on -- the line. ifExtnsTestResult returns success(2) if the discard -- packet was successfully transmitted and failed(7) if an error -- was detected on transmission. The definition of "transmission -- error" in this context is left to the discretion of the -- implementor. END PPP-IP-NCP-MIB DEFINITIONS ::= BEGIN IMPORTS ifIndex FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212 ppp FROM PPP-LCP-MIB; -- The PPP IP Group. -- Implementation of this group is mandatory for all -- PPP implementations that support operating IP over PPP. pppIp OBJECT IDENTIFIER ::= { ppp 3 } pppIpTable OBJECT-TYPE SYNTAX SEQUENCE OF PppIpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the IP parameters and statistics for the local PPP entity." ::= { pppIp 1 } pppIpEntry OBJECT-TYPE SYNTAX PppIpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IPCP status information for a particular PPP link." INDEX { ifIndex } ::= { pppIpTable 1 } PppIpEntry ::= SEQUENCE { pppIpOperStatus INTEGER, pppIpLocalToRemoteCompressionProtocol INTEGER, pppIpRemoteToLocalCompressionProtocol INTEGER, pppIpRemoteMaxSlotId INTEGER, pppIpLocalMaxSlotId INTEGER } -- The following object reflect the values of the option -- parameters used in the PPP IP Control Protocol -- pppIpLocalToRemoteCompressionProtocol -- pppIpRemoteToLocalCompressionProtocol -- pppIpRemoteMaxSlotId -- pppIpLocalMaxSlotId -- These values are not available until after the PPP Option -- negotiation has completed, which is indicated by the link -- reaching the open state (i.e., pppIpOperStatus is set to -- opened). -- -- Therefore, when pppIpOperStatus is not opened -- the contents of these objects is undefined. The value -- returned when accessing the objects is an implementation -- dependent issue. pppIpOperStatus OBJECT-TYPE SYNTAX INTEGER {opened(1), not-opened(2)} ACCESS read-only STATUS mandatory DESCRIPTION "The operational status of the IP network protocol. If the value of this object is up then the finite state machine for the IP network protocol has reached the Opened state." ::= { pppIpEntry 1 } pppIpLocalToRemoteCompressionProtocol OBJECT-TYPE SYNTAX INTEGER { none(1), vj-tcp(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The IP compression protocol that the local PPP-IP entity uses when sending packets to the remote PPP-IP entity. The value of this object is meaningful only when the link has reached the open state (pppIpOperStatus is opened)." ::= { pppIpEntry 2 } pppIpRemoteToLocalCompressionProtocol OBJECT-TYPE SYNTAX INTEGER { none(1), vj-tcp(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The IP compression protocol that the remote PPP-IP entity uses when sending packets to the local PPP-IP entity. The value of this object is meaningful only when the link has reached the open state (pppIpOperStatus is opened)." ::= { pppIpEntry 3 } pppIpRemoteMaxSlotId OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The Max-Slot-Id parameter that the remote node has advertised and that is in use on the link. If vj-tcp header compression is not in use on the link then the value of this object shall be 0. The value of this object is meaningful only when the link has reached the open state (pppIpOperStatus is opened)." ::= { pppIpEntry 4 } pppIpLocalMaxSlotId OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The Max-Slot-Id parameter that the local node has advertised and that is in use on the link. If vj-tcp header compression is not in use on the link then the value of this object shall be 0. The value of this object is meaningful only when the link has reached the open state (pppIpOperStatus is opened)." ::= { pppIpEntry 5 } -- -- The PPP IP Configuration table. -- This is a separate table in order to facilitate -- placing these variables in a separate MIB view. -- pppIpConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF PppIpConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing configuration variables for the IPCP for the local PPP entity." ::= { pppIp 2 } pppIpConfigEntry OBJECT-TYPE SYNTAX PppIpConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IPCP information for a particular PPP link." INDEX { ifIndex } ::= { pppIpConfigTable 1 } PppIpConfigEntry ::= SEQUENCE { pppIpConfigAdminStatus INTEGER, pppIpConfigCompression INTEGER } pppIpConfigAdminStatus OBJECT-TYPE SYNTAX INTEGER {open(1), close(2)} ACCESS read-write STATUS mandatory DESCRIPTION "The immediate desired status of the IP network protocol. Setting this object to open will inject an administrative open event into the IP network protocol's finite state machine. Setting this object to close will inject an administrative close event into the IP network protocol's finite state machine." ::= { pppIpConfigEntry 1 } pppIpConfigCompression OBJECT-TYPE SYNTAX INTEGER { none(1), vj-tcp(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If none(1) then the local node will not attempt to negotiate any IP Compression option. Otherwise, the local node will attempt to negotiate compression mode indicated by the enumerated value. Changing this object will have effect when the link is next restarted." REFERENCE "Section 4.0, Van Jacobson TCP/IP Header Compression of RFC1332." DEFVAL { none } ::= { pppIpConfigEntry 2 } END PPP-BRIDGE-NCP-MIB DEFINITIONS ::= BEGIN IMPORTS ifIndex FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212 ppp FROM PPP-LCP-MIB; pppBridge OBJECT IDENTIFIER ::= { ppp 4 } -- -- The PPP Bridge NCP Group. -- Implementation of this group is mandatory for all -- PPP implementations that support MAC Bridging over -- PPP (RFC1220). -- -- The following object reflect the values of the option -- parameters used in the PPP Link Control Protocol -- pppBridgeLocalToRemoteTinygramCompression -- pppBridgeRemoteToLocalTinygramCompression -- pppBridgeLocalToRemoteLanId -- pppBridgeRemoteToLocalLanId -- -- These values are not available until after the PPP Option -- negotiation has completed, which is indicated by the link -- reaching the open state (i.e. pppBridgeOperStatus is set to -- opened). -- -- Therefore, when pppBridgeOperStatus is not opened -- the contents of these objects is undefined. The value -- returned when accessing the objects is an implementation -- dependent issue. pppBridgeTable OBJECT-TYPE SYNTAX SEQUENCE OF PppBridgeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the parameters and statistics for the local PPP entity that are related to the operation of Bridging over the PPP." ::= { pppBridge 1 } pppBridgeEntry OBJECT-TYPE SYNTAX PppBridgeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Bridging information for a particular PPP link." INDEX { ifIndex } ::= { pppBridgeTable 1 } PppBridgeEntry ::= SEQUENCE { pppBridgeOperStatus INTEGER, pppBridgeLocalToRemoteTinygramCompression INTEGER, pppBridgeRemoteToLocalTinygramCompression INTEGER, pppBridgeLocalToRemoteLanId INTEGER, pppBridgeRemoteToLocalLanId INTEGER } pppBridgeOperStatus OBJECT-TYPE SYNTAX INTEGER {opened(1), not-opened(2)} ACCESS read-only STATUS mandatory DESCRIPTION "The operational status of the Bridge network protocol. If the value of this object is up then the finite state machine for the Bridge network protocol has reached the Opened state." ::= { pppBridgeEntry 1 } pppBridgeLocalToRemoteTinygramCompression OBJECT-TYPE SYNTAX INTEGER { false(1), true(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the local node will perform Tinygram Compression when sending packets to the remote entity. If false then the local entity will not perform Tinygram Compression. If true then the local entity will perform Tinygram Compression. The value of this object is meaningful only when the link has reached the open state (pppBridgeOperStatus is opened)." REFERENCE "Section 6.7, Tinygram Compression Option, of RFC1220" ::= { pppBridgeEntry 2 } pppBridgeRemoteToLocalTinygramCompression OBJECT-TYPE SYNTAX INTEGER { false(1), true(2) } ACCESS read-only STATUS mandatory DESCRIPTION "If false(1) then the remote entity is not expected to perform Tinygram Compression. If true then the remote entity is expected to perform Tinygram Compression. The value of this object is meaningful only when the link has reached the open state (pppBridgeOperStatus is opened)." REFERENCE "Section 6.7, Tinygram Compression Option, of RFC1220" ::= { pppBridgeEntry 3 } pppBridgeLocalToRemoteLanId OBJECT-TYPE SYNTAX INTEGER { false(1), true(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the local node will include the LAN Identification field in transmitted packets or not. If false(1) then the local node will not transmit this field, true(2) means that the field will be transmitted. The value of this object is meaningful only when the link has reached the open state (pppBridgeOperStatus is opened)." REFERENCE "Section 6.8, LAN Identification Option, of RFC1220" ::= { pppBridgeEntry 4 } pppBridgeRemoteToLocalLanId OBJECT-TYPE SYNTAX INTEGER { false(1), true(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the remote node has indicated that it will include the LAN Identification field in transmitted packets or not. If false(1) then the field will not be transmitted, if true(2) then the field will be transmitted. The value of this object is meaningful only when the link has reached the open state (pppBridgeOperStatus is opened)." REFERENCE "Section 6.8, LAN Identification Option, of RFC1220" ::= { pppBridgeEntry 5 } -- -- The PPP Bridge Configuration table -- pppBridgeConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF PppBridgeConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the parameters and statistics for the local PPP entity that are related to the operation of Bridging over the PPP." ::= { pppBridge 2 } pppBridgeConfigEntry OBJECT-TYPE SYNTAX PppBridgeConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Bridging Configuration information for a particular PPP link." INDEX { ifIndex } ::= { pppBridgeConfigTable 1 } PppBridgeConfigEntry ::= SEQUENCE { pppBridgeConfigAdminStatus INTEGER, pppBridgeConfigTinygram INTEGER, pppBridgeConfigRingId INTEGER, pppBridgeConfigLineId INTEGER, pppBridgeConfigLanId INTEGER } pppBridgeConfigAdminStatus OBJECT-TYPE SYNTAX INTEGER { open(1), close(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The immediate desired status of the Bridging network protocol. Setting this object to open will inject an administrative open event into the Bridging network protocol's finite state machine. Setting this object to close will inject an administrative close event into the Bridging network protocol's finite state machine." ::= { pppBridgeConfigEntry 1 } pppBridgeConfigTinygram OBJECT-TYPE SYNTAX INTEGER { false(1), true(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If false then the local BNCP entity will not initiate the Tinygram Compression Option Negotiation. If true then the local BNCP entity will initiate negotiation of this option." REFERENCE "Section 6.7, Tinygram Compression Option, of RFC1220" DEFVAL { true } ::= { pppBridgeConfigEntry 2 } pppBridgeConfigRingId OBJECT-TYPE SYNTAX INTEGER { false(1), true(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If false then the local PPP Entity will not initiate a Remote Ring Identification Option negotiation. If true then the local PPP entity will intiate this negotiation. This MIB object is relevant only if the interface is for 802.5 Token Ring bridging." REFERENCE "Section 6.4, IEEE 802.5 Remote Ring Identification Option, of RFC1220" DEFVAL { false } ::= { pppBridgeConfigEntry 3 } pppBridgeConfigLineId OBJECT-TYPE SYNTAX INTEGER { false(1), true(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If false then the local PPP Entity is not to initiate a Line Identification Option negotiation. If true then the local PPP entity will intiate this negotiation. This MIB object is relevant only if the interface is for 802.5 Token Ring bridging." REFERENCE "Section 6.5, IEEE 802.5 Line Identification Option, of RFC1220" DEFVAL { false } ::= { pppBridgeConfigEntry 4 } pppBridgeConfigLanId OBJECT-TYPE SYNTAX INTEGER { false(1), true(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If false then the local BNCP entity will not initiate the LAN Identification Option Negotiation. If true then the local BNCP entity will initiate negotiation of this option." REFERENCE "Section 6.8, LAN Identification Option, of RFC1220" DEFVAL { false } ::= { pppBridgeConfigEntry 5 } -- -- The PPP Bridge Media Status Table -- pppBridgeMediaTable OBJECT-TYPE SYNTAX SEQUENCE OF PppBridgeMediaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table identifying which MAC media types are enabled for the Bridging NCPs." ::= { pppBridge 3 } pppBridgeMediaEntry OBJECT-TYPE SYNTAX PppBridgeMediaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Status of a specific MAC Type for a specific PPP Link." INDEX { ifIndex, pppBridgeMediaMacType } ::= { pppBridgeMediaTable 1 } PppBridgeMediaEntry ::= SEQUENCE { pppBridgeMediaMacType INTEGER, pppBridgeMediaLocalStatus INTEGER, pppBridgeMediaRemoteStatus INTEGER } pppBridgeMediaMacType OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The MAC type for which this entry in the pppBridgeMediaTable is providing status information. Valid values for this object are defined in Section 6.6 MAC Type Support Selection of RFC1220 (Bridging Point-to-Point Protocol)." REFERENCE "Section 6.6, MAC Type Support Selection, of RFC1212." ::= { pppBridgeMediaEntry 1 } pppBridgeMediaLocalStatus OBJECT-TYPE SYNTAX INTEGER { accept(1), dont-accept(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the local PPP Bridging Entity will accept packets of the protocol type identified in pppBridgeMediaMacType on the PPP link identified by ifIndex or not. If this object is accept then any packets of the indicated MAC type will be received and properly processed. If this object is dont- accept then received packets of the indicated MAC type will not be properly processed." REFERENCE "Section 6.6, MAC Type Support Selection, of RFC1212." ::= { pppBridgeMediaEntry 2 } pppBridgeMediaRemoteStatus OBJECT-TYPE SYNTAX INTEGER { accept(1), dont-accept(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether the local PPP Bridging Entity believes that the remote PPP Bridging Entity will accept packets of the protocol type identified in pppBridgeMediaMacType on the PPP link identified by ifIndex or not." REFERENCE "Section 6.6, MAC Type Support Selection, of RFC1212." ::= { pppBridgeMediaEntry 3 } -- -- The PPP Bridge Media Configuration Table -- pppBridgeMediaConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF PppBridgeMediaConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table identifying which MAC media types are enabled for the Bridging NCPs." ::= { pppBridge 4 } pppBridgeMediaConfigEntry OBJECT-TYPE SYNTAX PppBridgeMediaConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Status of a specific MAC Type for a specific PPP Link." INDEX { ifIndex, pppBridgeMediaConfigMacType } ::= { pppBridgeMediaConfigTable 1 } PppBridgeMediaConfigEntry ::= SEQUENCE { pppBridgeMediaConfigMacType INTEGER, pppBridgeMediaConfigLocalStatus INTEGER } pppBridgeMediaConfigMacType OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The MAC type for which this entry in the pppBridgeMediaConfigTable is providing status information. Valid values for this object are defined in Section 6.6 MAC Type Support Selection of RFC1220 (Bridging Point-to-Point Protocol)." REFERENCE "Section 6.6, MAC Type Support Selection, of RFC1212." ::= { pppBridgeMediaConfigEntry 1 } pppBridgeMediaConfigLocalStatus OBJECT-TYPE SYNTAX INTEGER { accept(1), dont-accept(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether the local PPP Bridging Entity should accept packets of the protocol type identified in pppBridgeMediaConfigMacType on the PPP link identified by ifIndex or not. Setting this object to the value dont-accept has the affect of invalidating the corresponding entry in the pppBridgeMediaConfigTable object. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Changing this object will have effect when the link is next restarted." REFERENCE "Section 6.6, MAC Type Support Selection, of RFC1212." ::= { pppBridgeMediaConfigEntry 2 } END BRIDGE-MIB DEFINITIONS ::= BEGIN IMPORTS Counter, TimeTicks FROM RFC1155-SMI mib-2 FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215; -- All representations of MAC addresses in this MIB Module -- use, as a textual convention (i.e. this convention does -- not affect their encoding), the data type: MacAddress ::= OCTET STRING (SIZE (6)) -- a 6 octet address -- in the -- "canonical" -- order -- defined by IEEE 802.1a, i.e., as if it were transmitted -- least significant bit first, even though 802.5 (in -- contrast to other n802.x protocols) requires MAC -- addresses to be transmitted most significant bit first. -- -- 16-bit addresses, if needed, are represented by setting -- their upper 4 octets to all 0's, i.e., AAFF would be -- represented as 00000000AAFF. -- Similarly, all representations of Bridge-Id in this MIB -- Module use, as a textual convention (i.e. this -- convention does not affect their encoding), the data -- type: BridgeId ::= OCTET STRING (SIZE (8)) -- the -- Bridge-Identifier -- as used in the -- Spanning Tree -- Protocol to uniquely identify a bridge. Its first two -- octets (in network byte order) contain a priority -- value and its last 6 octets contain the MAC address -- used to refer to a bridge in a unique fashion -- (typically, the numerically smallest MAC address -- of all ports on the bridge). -- Several objects in this MIB module represent values of -- timers used by the Spanning Tree Protocol. In this -- MIB, these timers have values in units of hundreths of -- a second (i.e. 1/100 secs). -- These timers, when stored in a Spanning Tree Protocol's -- BPDU, are in units of 1/256 seconds. Note, however, -- that 802.1D-1990 specifies a settable granularity of -- no more than 1 second for these timers. To avoid -- ambiguity, a data type is defined here as a textual -- convention and all representation of these timers -- in this MIB module are defined using this data type. An -- algorithm is also defined for converting between the -- different units, to ensure a timer's value is not -- distorted by multiple conversions. -- The data type is: Timeout ::= INTEGER -- a STP timer in units of 1/100 seconds -- To convert a Timeout value into a value in units of -- 1/256 seconds, the following algorithm should be used: -- -- b = floor( (n * 256) / 100) -- -- where: -- floor = quotient [ignore remainder] -- n is the value in 1/100 second units -- b is the value in 1/256 second units -- -- To convert the value from 1/256 second units back to -- 1/100 seconds, the following algorithm should be used: -- -- n = ceiling( (b * 100) / 256) -- -- where: -- ceiling = quotient [if remainder is 0], or -- quotient + 1 [if remainder is non-zero] -- n is the value in 1/100 second units -- b is the value in 1/256 second units -- -- Note: it is important that the arithmetic operations are -- done in the order specified (i.e., multiply first, divide -- second). dot1dBridge OBJECT IDENTIFIER ::= { mib-2 17 } -- groups in the Bridge MIB dot1dBase OBJECT IDENTIFIER ::= { dot1dBridge 1 } dot1dStp OBJECT IDENTIFIER ::= { dot1dBridge 2 } dot1dSr OBJECT IDENTIFIER ::= { dot1dBridge 3 } -- separately documented dot1dTp OBJECT IDENTIFIER ::= { dot1dBridge 4 } dot1dStatic OBJECT IDENTIFIER ::= { dot1dBridge 5 } -- the dot1dBase group -- Implementation of the dot1dBase group is mandatory for all -- bridges. dot1dBaseBridgeAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However it is only required to be unique. When concatenated with dot1dStpPriority a unique BridgeIdentifier is formed which is used in the Spanning Tree Protocol." REFERENCE "IEEE 802.1D-1990: Sections 6.4.1.1.3 and 3.12.5" ::= { dot1dBase 1 } dot1dBaseNumPorts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of ports controlled by this bridging entity." REFERENCE "IEEE 802.1D-1990: Section 6.4.1.1.3" ::= { dot1dBase 2 } dot1dBaseType OBJECT-TYPE SYNTAX INTEGER { unknown(1), transparent-only(2), sourceroute-only(3), srt(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging this will be indicated by entries in the port table for the given type." ::= { dot1dBase 3 } -- The Generic Bridge Port Table dot1dBasePortTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1dBasePortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table that contains generic information about every port that is associated with this bridge. Transparent, source-route, and srt ports are included." ::= { dot1dBase 4 } dot1dBasePortEntry OBJECT-TYPE SYNTAX Dot1dBasePortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of information for each port of the bridge." REFERENCE "IEEE 802.1D-1990: Section 6.4.2, 6.6.1" INDEX { dot1dBasePort } ::= { dot1dBasePortTable 1 } Dot1dBasePortEntry ::= SEQUENCE { dot1dBasePort INTEGER, dot1dBasePortIfIndex INTEGER, dot1dBasePortCircuit OBJECT IDENTIFIER, dot1dBasePortDelayExceededDiscards Counter, dot1dBasePortMtuExceededDiscards Counter } dot1dBasePort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The port number of the port for which this entry contains bridge management information." ::= { dot1dBasePortEntry 1 } dot1dBasePortIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of the instance of the ifIndex object, defined in MIB-II, for the interface corresponding to this port." ::= { dot1dBasePortEntry 2 } dot1dBasePortCircuit OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "For a port which (potentially) has the same value of dot1dBasePortIfIndex as another port on the same bridge, this object contains the name of an object instance unique to this port. For example, in the case where multiple ports correspond one- to-one with multiple X.25 virtual circuits, this value might identify an (e.g., the first) object instance associated with the X.25 virtual circuit corresponding to this port. For a port which has a unique value of dot1dBasePortIfIndex, this object can have the value { 0 0 }." ::= { dot1dBasePortEntry 3 } dot1dBasePortDelayExceededDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges." REFERENCE "IEEE 802.1D-1990: Section 6.6.1.1.3" ::= { dot1dBasePortEntry 4 } dot1dBasePortMtuExceededDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames discarded by this port due to an excessive size. It is incremented by both transparent and source route bridges." REFERENCE "IEEE 802.1D-1990: Section 6.6.1.1.3" ::= { dot1dBasePortEntry 5 } -- the dot1dStp group -- Implementation of the dot1dStp group is optional. It is -- implemented by those bridges that support the Spanning Tree -- Protocol. dot1dStpProtocolSpecification OBJECT-TYPE SYNTAX INTEGER { unknown(1), decLb100(2), ieee8021d(3) } ACCESS read-only STATUS mandatory DESCRIPTION "An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementations will return 'ieee8021d(3)'. If future versions of the IEEE Spanning Tree Protocol are released that are incompatible with the current version a new value will be defined." ::= { dot1dStp 1 } dot1dStpPriority OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of dot1dBaseBridgeAddress." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.7" ::= { dot1dStp 2 } dot1dStpTimeSinceTopologyChange OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity." REFERENCE "IEEE 802.1D-1990: Section 6.8.1.1.3" ::= { dot1dStp 3 } dot1dStpTopChanges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of topology changes detected by this bridge since the management entity was last reset or initialized." REFERENCE "IEEE 802.1D-1990: Section 6.8.1.1.3" ::= { dot1dStp 4 } dot1dStpDesignatedRoot OBJECT-TYPE SYNTAX BridgeId ACCESS read-only STATUS mandatory DESCRIPTION "The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.1" ::= { dot1dStp 5 } dot1dStpRootCost OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The cost of the path to the root as seen from this bridge." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.2" ::= { dot1dStp 6 } dot1dStpRootPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The port number of the port which offers the lowest cost path from this bridge to the root bridge." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.3" ::= { dot1dStp 7 } dot1dStpMaxAge OBJECT-TYPE SYNTAX Timeout ACCESS read-only STATUS mandatory DESCRIPTION "The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.4" ::= { dot1dStp 8 } dot1dStpHelloTime OBJECT-TYPE SYNTAX Timeout ACCESS read-only STATUS mandatory DESCRIPTION "The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.5" ::= { dot1dStp 9 } dot1dStpHoldTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.14" ::= { dot1dStp 10 } dot1dStpForwardDelay OBJECT-TYPE SYNTAX Timeout ACCESS read-only STATUS mandatory DESCRIPTION "This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to dot1dStpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.]" REFERENCE "IEEE 802.1D-1990: Section 4.5.3.6" ::= { dot1dStp 11 } dot1dStpBridgeMaxAge OBJECT-TYPE SYNTAX Timeout (600..4000) ACCESS read-write STATUS mandatory DESCRIPTION "The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.8" ::= { dot1dStp 12 } dot1dStpBridgeHelloTime OBJECT-TYPE SYNTAX Timeout (100..1000) ACCESS read-write STATUS mandatory DESCRIPTION "The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.9" ::= { dot1dStp 13 } dot1dStpBridgeForwardDelay OBJECT-TYPE SYNTAX Timeout (400..3000) ACCESS read-write STATUS mandatory DESCRIPTION "The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.10" ::= { dot1dStp 14 } -- The Spanning Tree Port Table dot1dStpPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1dStpPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table that contains port-specific information for the Spanning Tree Protocol." ::= { dot1dStp 15 } dot1dStpPortEntry OBJECT-TYPE SYNTAX Dot1dStpPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of information maintained by every port about the Spanning Tree Protocol state for that port." INDEX { dot1dStpPort } ::= { dot1dStpPortTable 1 } Dot1dStpPortEntry ::= SEQUENCE { dot1dStpPort INTEGER, dot1dStpPortPriority INTEGER, dot1dStpPortState INTEGER, dot1dStpPortEnable INTEGER, dot1dStpPortPathCost INTEGER, dot1dStpPortDesignatedRoot BridgeId, dot1dStpPortDesignatedCost INTEGER, dot1dStpPortDesignatedBridge BridgeId, dot1dStpPortDesignatedPort OCTET STRING, dot1dStpPortForwardTransitions Counter } dot1dStpPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The port number of the port for which this entry contains Spanning Tree Protocol management information." REFERENCE "IEEE 802.1D-1990: Section 6.8.2.1.2" ::= { dot1dStpPortEntry 1 } dot1dStpPortPriority OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of dot1dStpPort." REFERENCE "IEEE 802.1D-1990: Section 4.5.5.1" ::= { dot1dStpPortEntry 2 } dot1dStpPortState OBJECT-TYPE SYNTAX INTEGER { disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6) } ACCESS read-only STATUS mandatory DESCRIPTION "The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see dot1dStpPortEnable), this object will have a value of disabled(1)." REFERENCE "IEEE 802.1D-1990: Section 4.5.5.2" ::= { dot1dStpPortEntry 3 } dot1dStpPortEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The enabled/disabled status of the port." REFERENCE "IEEE 802.1D-1990: Section 4.5.5.2" ::= { dot1dStpPortEntry 4 } dot1dStpPortPathCost OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN." REFERENCE "IEEE 802.1D-1990: Section 4.5.5.3" ::= { dot1dStpPortEntry 5 } dot1dStpPortDesignatedRoot OBJECT-TYPE SYNTAX BridgeId ACCESS read-only STATUS mandatory DESCRIPTION "The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached." REFERENCE "IEEE 802.1D-1990: Section 4.5.5.4" ::= { dot1dStpPortEntry 6 } dot1dStpPortDesignatedCost OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs." REFERENCE "IEEE 802.1D-1990: Section 4.5.5.5" ::= { dot1dStpPortEntry 7 } dot1dStpPortDesignatedBridge OBJECT-TYPE SYNTAX BridgeId ACCESS read-only STATUS mandatory DESCRIPTION "The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment." REFERENCE "IEEE 802.1D-1990: Section 4.5.5.6" ::= { dot1dStpPortEntry 8 } dot1dStpPortDesignatedPort OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) ACCESS read-only STATUS mandatory DESCRIPTION "The Port Identifier of the port on the Designated Bridge for this port's segment." REFERENCE "IEEE 802.1D-1990: Section 4.5.5.7" ::= { dot1dStpPortEntry 9 } dot1dStpPortForwardTransitions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times this port has transitioned from the Learning state to the Forwarding state." ::= { dot1dStpPortEntry 10 } -- the dot1dTp group -- Implementation of the dot1dTp group is optional. It is -- implemented by those bridges that support the transparent -- bridging mode. A transparent or SRT bridge will implement -- this group. dot1dTpLearnedEntryDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of Forwarding Database entries, which have been or would have been learnt, but have been discarded due to a lack of space to store them in the Forwarding Database. If this counter is increasing, it indicates that the Forwarding Database is regularly becoming full (a condition which has unpleasant performance effects on the subnetwork). If this counter has a significant value but is not presently increasing, it indicates that the problem has been occurring but is not persistent." REFERENCE "IEEE 802.1D-1990: Section 6.7.1.1.3" ::= { dot1dTp 1 } dot1dTpAgingTime OBJECT-TYPE SYNTAX INTEGER (10..1000000) ACCESS read-write STATUS mandatory DESCRIPTION "The timeout period in seconds for aging out dynamically learned forwarding information. 802.1D-1990 recommends a default of 300 seconds." REFERENCE "IEEE 802.1D-1990: Section 6.7.1.1.3" ::= { dot1dTp 2 } -- The Forwarding Database for Transparent Bridges dot1dTpFdbTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1dTpFdbEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame." ::= { dot1dTp 3 } dot1dTpFdbEntry OBJECT-TYPE SYNTAX Dot1dTpFdbEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a specific unicast MAC address for which the bridge has some forwarding and/or filtering information." INDEX { dot1dTpFdbAddress } ::= { dot1dTpFdbTable 1 } Dot1dTpFdbEntry ::= SEQUENCE { dot1dTpFdbAddress MacAddress, dot1dTpFdbPort INTEGER, dot1dTpFdbStatus INTEGER } dot1dTpFdbAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "A unicast MAC address for which the bridge has forwarding and/or filtering information." REFERENCE "IEEE 802.1D-1990: Section 3.9.1, 3.9.2" ::= { dot1dTpFdbEntry 1 } dot1dTpFdbPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of dot1dTpFdbAddress has been seen. A value of '0' indicates that the port number has not been learned but that the bridge does have some forwarding/filtering information about this address (e.g. in the dot1dStaticTable). Implementors are encouraged to assign the port value to this object whenever it is learned even for addresses for which the corresponding value of dot1dTpFdbStatus is not learned(3)." ::= { dot1dTpFdbEntry 2 } dot1dTpFdbStatus OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2), learned(3), self(4), mgmt(5) } ACCESS read-only STATUS mandatory DESCRIPTION "The status of this entry. The meanings of the values are: other(1) : none of the following. This would include the case where some other MIB object (not the corresponding instance of dot1dTpFdbPort, nor an entry in the dot1dStaticTable) is being used to determine if and how frames addressed to the value of the corresponding instance of dot1dTpFdbAddress are being forwarded. invalid(2) : this entry is not longer valid (e.g., it was learned but has since aged-out), but has not yet been flushed from the table. learned(3) : the value of the corresponding instance of dot1dTpFdbPort was learned, and is being used. self(4) : the value of the corresponding instance of dot1dTpFdbAddress represents one of the bridge's addresses. The corresponding instance of dot1dTpFdbPort indicates which of the bridge's ports has this address. mgmt(5) : the value of the corresponding instance of dot1dTpFdbAddress is also the value of an existing instance of dot1dStaticAddress." ::= { dot1dTpFdbEntry 3 } -- Port Table for Transparent Bridges dot1dTpPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1dTpPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table that contains information about every port that is associated with this transparent bridge." ::= { dot1dTp 4 } dot1dTpPortEntry OBJECT-TYPE SYNTAX Dot1dTpPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of information for each port of a transparent bridge." INDEX { dot1dTpPort } ::= { dot1dTpPortTable 1 } Dot1dTpPortEntry ::= SEQUENCE { dot1dTpPort INTEGER, dot1dTpPortMaxInfo INTEGER, dot1dTpPortInFrames Counter, dot1dTpPortOutFrames Counter, dot1dTpPortInDiscards Counter } dot1dTpPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The port number of the port for which this entry contains Transparent bridging management information." ::= { dot1dTpPortEntry 1 } -- It would be nice if we could use ifMtu as the size of the -- largest INFO field, but we can't because ifMtu is defined -- to be the size that the (inter-)network layer can use which -- can differ from the MAC layer (especially if several layers -- of encapsulation are used). dot1dTpPortMaxInfo OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum size of the INFO (non-MAC) field that this port will receive or transmit." ::= { dot1dTpPortEntry 2 } dot1dTpPortInFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames." REFERENCE "IEEE 802.1D-1990: Section 6.6.1.1.3" ::= { dot1dTpPortEntry 3 } dot1dTpPortOutFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames." REFERENCE "IEEE 802.1D-1990: Section 6.6.1.1.3" ::= { dot1dTpPortEntry 4 } dot1dTpPortInDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of valid frames received which were discarded (i.e., filtered) by the Forwarding Process." REFERENCE "IEEE 802.1D-1990: Section 6.6.1.1.3" ::= { dot1dTpPortEntry 5 } -- The Static (Destination-Address Filtering) Database -- Implementation of this group is optional. dot1dStaticTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1dStaticEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table containing filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific destination addresses are allowed to be forwarded. The value of zero in this table as the port number from which frames with a specific destination address are received, is used to specify all ports for which there is no specific entry in this table for that particular destination address. Entries are valid for unicast and for group/broadcast addresses." REFERENCE "IEEE 802.1D-1990: Section 6.7.2" ::= { dot1dStatic 1 } dot1dStaticEntry OBJECT-TYPE SYNTAX Dot1dStaticEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from a specific port and containing a specific destination address are allowed to be forwarded." REFERENCE "IEEE 802.1D-1990: Section 6.7.2" INDEX { dot1dStaticAddress, dot1dStaticReceivePort } ::= { dot1dStaticTable 1 } Dot1dStaticEntry ::= SEQUENCE { dot1dStaticAddress MacAddress, dot1dStaticReceivePort INTEGER, dot1dStaticAllowedToGoTo OCTET STRING, dot1dStaticStatus INTEGER } dot1dStaticAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-write STATUS mandatory DESCRIPTION "The destination MAC address in a frame to which this entry's filtering information applies. This object can take the value of a unicast address, a group address or the broadcast address." REFERENCE "IEEE 802.1D-1990: Section 3.9.1, 3.9.2" ::= { dot1dStaticEntry 1 } dot1dStaticReceivePort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the bridge for which there is no other applicable entry." ::= { dot1dStaticEntry 2 } dot1dStaticAllowedToGoTo OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The set of ports to which frames received from a specific port and destined for a specific MAC address, are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) The default value of this object is a string of ones of appropriate length." ::= { dot1dStaticEntry 3 } dot1dStaticStatus OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2), permanent(3), deleteOnReset(4), deleteOnTimeout(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates the status of this entry. The default value is permanent(3). other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object removes the corresponding entry. permanent(3) - this entry is currently in use and will remain so after the next reset of the bridge. deleteOnReset(4) - this entry is currently in use and will remain so until the next reset of the bridge. deleteOnTimeout(5) - this entry is currently in use and will remain so until it is aged out." ::= { dot1dStaticEntry 4 } -- Traps for use by Bridges -- Traps for the Spanning Tree Protocol newRoot TRAP-TYPE ENTERPRISE dot1dBridge DESCRIPTION "The newRoot trap indicates that the sending agent has become the new root of the Spanning Tree; the trap is sent by a bridge soon after its election as the new root, e.g., upon expiration of the Topology Change Timer immediately subsequent to its election. Implementation of this trap is optional." ::= 1 topologyChange TRAP-TYPE ENTERPRISE dot1dBridge DESCRIPTION "A topologyChange trap is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. The trap is not sent if a newRoot trap is sent for the same transition. Implementation of this trap is optional." ::= 2 END IANAifType-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY FROM SNMPv2-SMI TEXTUAL-CONVENTION FROM SNMPv2-TC mib-2 FROM RFC1213-MIB; ianaifType MODULE-IDENTITY LAST-UPDATED "9311082155Z" ORGANIZATION "IANA" CONTACT-INFO " Internet Assigned Numbers Authority Postal: USC/Information Sciences Institute 4676 Admiralty Way, Marina del Rey, CA 90292 Tel: +1 310 822 1511 E-Mail: iana@isi.edu" DESCRIPTION "The MIB module which defines the IANAifType textual convention, and thus the enumerated values of the ifType object defined in MIB-II's ifTable." ::= { mib-2 30 } IANAifType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This data type is used as the syntax of the ifType object in the (updated) definition of MIB-II's ifTable. The definition of this textual convention with the addition of newly assigned values is published periodically by the IANA, in either the Assigned Numbers RFC, or some derivative of it specific to Internet Network Management number assignments. (The latest arrangements can be obtained by contacting the IANA.) Requests for new values should be made to IANA via email (iana@isi.edu). The relationship between the assignment of ifType values and of OIDs to particular media-specific MIBs is solely the purview of IANA and is subject to change without notice. Quite often, a media-specific MIB's OID-subtree assignment within MIB-II's 'transmission' subtree will be the same as its ifType value. However, in some circumstances this will not be the case, and implementors must not pre-assume any specific relationship between ifType values and transmission subtree OIDs." SYNTAX INTEGER { other(1), -- none of the following regular1822(2), hdh1822(3), ddnX25(4), rfc877x25(5), ethernetCsmacd(6), iso88023Csmacd(7), iso88024TokenBus(8), iso88025TokenRing(9), iso88026Man(10), starLan(11), proteon10Mbit(12), proteon80Mbit(13), hyperchannel(14), fddi(15), lapb(16), sdlc(17), ds1(18), -- DS1/E1 (RFC 1406) e1(19), -- obsolete basicISDN(20), primaryISDN(21), propPointToPointSerial(22), -- proprietary serial ppp(23), softwareLoopback(24), eon(25), -- CLNP over IP (RFC 1070) ethernet3Mbit(26), nsip(27), -- XNS over IP slip(28), -- generic SLIP ultra(29), -- ULTRA technologies ds3(30), -- T-3 sip(31), -- SMDS frameRelay(32), -- DTE only rs232(33), para(34), -- parallel-port arcnet(35), -- arcnet arcnetPlus(36), -- arcnet plus atm(37), -- ATM cells miox25(38), sonet(39), -- SONET or SDH x25ple(40), iso88022llc(41), localTalk(42), smdsDxi(43), frameRelayService(44), -- Frame relay DCE v35(45), hssi(46), hippi(47), modem(48), -- Generic modem aal5(49), -- AAL5 over ATM sonetPath(50), sonetVT(51), smdsIcip(52), -- SMDS InterCarrier Interface propVirtual(53), -- proprietary virtual/internal propMultiplexor(54) -- proprietary multiplexing } END IF-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32, Integer32, TimeTicks, Counter64, NOTIFICATION-TYPE FROM SNMPv2-SMI TEXTUAL-CONVENTION, DisplayString, PhysAddress, TruthValue, RowStatus, AutonomousType, TestAndIncr FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RCC HACK - BEGIN -- snmpTraps FROM SNMPv2-MIB -- RCC HACK - END IANAifType FROM IANAifType-MIB mib-2, interfaces FROM RFC1213-MIB; ifMIB MODULE-IDENTITY LAST-UPDATED "9311082155Z" ORGANIZATION "IETF Interfaces MIB Working Group" CONTACT-INFO " Keith McCloghrie Postal: Hughes LAN Systems 1225 Charleston Road, Mountain View, CA 94043 Tel: +1 415 966 7934 E-Mail: kzm@hls.com Frank Kastenholz Postal: FTP Software 2 High Street, North Andover, MA 01845 Tel: +1 508 685 4000 E-Mail: kasten@ftp.com" DESCRIPTION "The MIB module to describe generic objects for network interface sub-layers. This MIB is an updated version of MIB-II's ifTable, and incorporates the extensions defined in RFC 1229." ::= { mib-2 31 } -- RCC HACK - BEGIN -- -- Additions to resolve some SNMP V2 dependencies so we don't -- have to pull-in a lot of mib modules. -- internet OBJECT IDENTIFIER ::= { iso org(3) dod(6) 1 } snmpV2 OBJECT IDENTIFIER ::= { internet 6 } snmpModules OBJECT IDENTIFIER ::= { snmpV2 3 } snmpMIB OBJECT IDENTIFIER ::= { snmpModules 1 } snmpMIBObjects OBJECT IDENTIFIER ::= { snmpMIB 1 } snmpTraps OBJECT IDENTIFIER ::= { snmpMIBObjects 5 } -- RCC HACK - END ifMIBObjects OBJECT IDENTIFIER ::= { ifMIB 1 } -- RCC HACK - BEGIN -- -- Modification to resolve conflict with "OwnerString" definition -- in rfc1271.mib. In rfc1271.mib "OwnerString" is defined as -- "DisplayString" whereas in this file, it is define as OCTET -- STRING. -- OwnerString ::= DisplayString -- RCC HACK - END -- OwnerString has the same semantics as used in RFC 1271 -- -- OwnerString ::= TEXTUAL-CONVENTION -- DISPLAY-HINT "255a" -- STATUS current -- DESCRIPTION -- "This data type is used to model an administratively -- assigned name of the owner of a resource. This -- information is taken from the NVT ASCII character set. -- It is suggested that this name contain one or more of -- the following: ASCII form of the manager station's -- transport address, management station name (e.g., -- domain name), network management personnel's name, -- location, or phone number. In some cases the agent -- itself will be the owner of an entry. In these cases, -- this string shall be set to a string starting with -- 'agent'." -- SYNTAX OCTET STRING (SIZE(0..255)) -- InterfaceIndex contains the semantics of ifIndex and -- should be used for any objects defined on other mib -- modules that need these semantics. InterfaceIndex ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub- layer must remain constant at least from one re- initialization of the entity's network management system to the next re-initialization." SYNTAX Integer32 ifNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of network interfaces (regardless of their current state) present on this system." ::= { interfaces 1 } -- the Interfaces table -- The Interfaces table contains information on the entity's -- interfaces. Each sub-layer below the internetwork-layer -- of a network interface is considered to be an interface. ifTable OBJECT-TYPE SYNTAX SEQUENCE OF IfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface entries. The number of entries is given by the value of ifNumber." ::= { interfaces 2 } ifEntry OBJECT-TYPE SYNTAX IfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to a particular interface." INDEX { ifIndex } ::= { ifTable 1 } IfEntry ::= SEQUENCE { ifIndex InterfaceIndex, ifDescr DisplayString, ifType IANAifType, ifMtu Integer32, ifSpeed Gauge32, ifPhysAddress PhysAddress, ifAdminStatus INTEGER, ifOperStatus INTEGER, ifLastChange TimeTicks, ifInOctets Counter32, ifInUcastPkts Counter32, ifInNUcastPkts Counter32, -- deprecated ifInDiscards Counter32, ifInErrors Counter32, ifInUnknownProtos Counter32, ifOutOctets Counter32, ifOutUcastPkts Counter32, ifOutNUcastPkts Counter32, -- deprecated ifOutDiscards Counter32, ifOutErrors Counter32, ifOutQLen Gauge32, -- deprecated ifSpecific OBJECT IDENTIFIER -- deprecated } ifIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization." ::= { ifEntry 1 } ifDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware/software." ::= { ifEntry 2 } ifType OBJECT-TYPE SYNTAX IANAifType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of interface. Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA), through updating the syntax of the IANAifType textual convention." ::= { ifEntry 3 } ifMtu OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the largest packet which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface." ::= { ifEntry 4 } ifSpeed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295) and ifHighSpeed must be used to report the interace's speed. For a sub-layer which has no concept of bandwidth, this object should be zero." ::= { ifEntry 5 } ifPhysAddress OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The interface's address at its protocol sub-layer. The interface's media-specific MIB must define the bit and byte ordering and format of the value contained by this object. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length." ::= { ifEntry 6 } ifAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), -- ready to pass packets down(2), testing(3) -- in some test mode } MAX-ACCESS read-write STATUS current DESCRIPTION "The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. When a managed system initializes, all interfaces start with ifAdminStatus in the down(2) state. As a result of either explicit management action or per configuration information retained by the managed system, ifAdminStatus is then changed to either the up(1) or testing(3) states (or remains in the down(2) state)." ::= { ifEntry 7 } ifOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), -- ready to pass packets down(2), testing(3), -- in some test mode unknown(4), -- status can not be determined -- for some reason. dormant(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. If ifAdminStatus is down(2) then ifOperStatus should be down(2). If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic; it should change to dormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incomming connection); it should remain in the down(2) state if and only if there is a fault that prevents if from going to the up(1) state." ::= { ifEntry 8 } ifLastChange OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { ifEntry 9 } ifInOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received on the interface, including framing characters." ::= { ifEntry 10 } ifInUcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer." ::= { ifEntry 11 } ifInNUcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast or broadcast address at this sub-layer. This object is deprecated in favour of ifInMulticastPkts and ifInBroadcastPkts." ::= { ifEntry 12 } ifInDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space." ::= { ifEntry 13 } ifInErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol." ::= { ifEntry 14 } ifInUnknownProtos OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "For packet-oriented interfaces, the number of packets received via the interface which were discarded because of an unknown or unsupported protocol. For character-oriented or fixed-length interfaces which support protocol multiplexing the number of transmission units received via the interface which were discarded because of an unknown or unsupported protocol. For any interface which does not support protocol multiplexing, this counter will always be 0." ::= { ifEntry 15 } ifOutOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets transmitted out of the interface, including framing characters." ::= { ifEntry 16 } ifOutUcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent." ::= { ifEntry 17 } ifOutNUcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. This object is deprecated in favour of ifOutMulticastPkts and ifOutBroadcastPkts." ::= { ifEntry 18 } ifOutDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space." ::= { ifEntry 19 } ifOutErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not be transmitted because of errors." ::= { ifEntry 20 } ifOutQLen OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The length of the output packet queue (in packets)." ::= { ifEntry 21 } ifSpecific OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS deprecated DESCRIPTION "A reference to MIB definitions specific to the particular media being used to realize the interface. It is recommended that this value point to an instance of a MIB object in the media-specific MIB, i.e., that this object have the semantics associated with the InstancePointer textual convention defined in RFC 1443. In fact, it is recommended that the media- specific MIB specify what value ifSpecific should/can take for values of ifType. If no MIB definitions specific to the particular media are available, the value should be set to the OBJECT IDENTIFIER { 0 0 }." ::= { ifEntry 22 } -- -- Extension to the interface table -- -- This table replaces the ifExtnsTable table. -- ifXTable OBJECT-TYPE SYNTAX SEQUENCE OF IfXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface entries. The number of entries is given by the value of ifNumber. This table contains additional objects for the interface table." ::= { ifMIBObjects 1 } ifXEntry OBJECT-TYPE SYNTAX IfXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing additional management information applicable to a particular interface." AUGMENTS { ifEntry } ::= { ifXTable 1 } IfXEntry ::= SEQUENCE { ifName DisplayString, ifInMulticastPkts Counter32, ifInBroadcastPkts Counter32, ifOutMulticastPkts Counter32, ifOutBroadcastPkts Counter32, ifHCInOctets Counter64, ifHCInUcastPkts Counter64, ifHCInMulticastPkts Counter64, ifHCInBroadcastPkts Counter64, ifHCOutOctets Counter64, ifHCOutUcastPkts Counter64, ifHCOutMulticastPkts Counter64, ifHCOutBroadcastPkts Counter64, ifLinkUpDownTrapEnable INTEGER, ifHighSpeed Gauge32, ifPromiscuousMode TruthValue, ifConnectorPresent TruthValue } ifName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The textual name of the interface. The value of this object should be the name of the interface as assigned by the local device and should be suitable for use in commands entered at the device's `console'. This might be a text name, such as `le0' or a simple port number, such as `1', depending on the interface naming syntax of the device. If several entries in the ifTable together represent a single interface as named by the device, then each will have the same value of ifName. If there is no local name, or this object is otherwise not applicable, then this object contains a 0-length string." ::= { ifXEntry 1 } ifInMulticastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses." ::= { ifXEntry 2 } ifInBroadcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer." ::= { ifXEntry 3 } ifOutMulticastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses." ::= { ifXEntry 4 } ifOutBroadcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent." ::= { ifXEntry 5 } -- -- High Capacity Counter objects. These objects are all -- 64 bit versions of the "basic" ifTable counters. These -- objects all have the same basic semantics as their 32-bit -- counterparts, however, their syntax has been extended -- to 64 bits. -- ifHCInOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets." ::= { ifXEntry 6 } ifHCInUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. This object is a 64-bit version of ifInUcastPkts." ::= { ifXEntry 7 } ifHCInMulticastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. This object is a 64-bit version of ifInMulticastPkts." ::= { ifXEntry 8 } ifHCInBroadcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. This object is a 64-bit version of ifInBroadcastPkts." ::= { ifXEntry 9 } ifHCOutOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets." ::= { ifXEntry 10 } ifHCOutUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. This object is a 64-bit version of ifOutUcastPkts." ::= { ifXEntry 11 } ifHCOutMulticastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. This object is a 64-bit version of ifOutMulticastPkts." ::= { ifXEntry 12 } ifHCOutBroadcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. This object is a 64-bit version of ifOutBroadcastPkts." ::= { ifXEntry 13 } ifLinkUpDownTrapEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise." ::= { ifXEntry 14 } ifHighSpeed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface is somewhere in the range of `n-500,000' to `n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero." ::= { ifXEntry 15 } ifPromiscuousMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object has a value of false(2) if this interface only accepts packets/frames that are addressed to this station. This object has a value of true(1) when the station accepts all packets/frames transmitted on the media. The value true(1) is only legal on certain types of media. If legal, setting this object to a value of true(1) may require the interface to be reset before becoming effective. The value of ifPromiscuousMode does not affect the reception of broadcast and multicast packets/frames by the interface." ::= { ifXEntry 16 } ifConnectorPresent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object has the value 'true(1)' if the interface sublayer has a physical connector and the value 'false(2)' otherwise." ::= { ifXEntry 17 } -- The Interface Stack Group -- -- Implementation of this group is mandatory for all systems -- ifStackTable OBJECT-TYPE SYNTAX SEQUENCE OF IfStackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table containing information on the relationships between the multiple sub-layers of network interfaces. In particular, it contains information on which sub- layers run 'on top of' which other sub-layers. Each sub-layer corresponds to a conceptual row in the ifTable." ::= { ifMIBObjects 2 } ifStackEntry OBJECT-TYPE SYNTAX IfStackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information on a particular relationship between two sub-layers, specifying that one sub-layer runs on 'top' of the other sub-layer. Each sub-layer corresponds to a conceptual row in the ifTable." INDEX { ifStackHigherLayer, ifStackLowerLayer } ::= { ifStackTable 1 } IfStackEntry ::= SEQUENCE { ifStackHigherLayer Integer32, ifStackLowerLayer Integer32, ifStackStatus RowStatus } ifStackHigherLayer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of ifIndex corresponding to the higher sub-layer of the relationship, i.e., the sub-layer which runs on 'top' of the sub-layer identified by the corresponding instance of ifStackLowerLayer. If there is no higher sub-layer (below the internetwork layer), then this object has the value 0." ::= { ifStackEntry 1 } ifStackLowerLayer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of ifIndex corresponding to the lower sub- layer of the relationship, i.e., the sub-layer which runs 'below' the sub-layer identified by the corresponding instance of ifStackHigherLayer. If there is no lower sub-layer, then this object has the value 0." ::= { ifStackEntry 2 } ifStackStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of the relationship between two sub- layers. Changing the value of this object from 'active' to 'notInService' or 'destroy' will likely have consequences up and down the interface stack. Thus, write access to this object is likely to be inappropriate for some types of interfaces, and many implementations will choose not to support write- access for any type of interface." ::= { ifStackEntry 3 } -- -- The Interface Test Table -- -- This group of objects is optional. However, a media-specific -- MIB may make implementation of this group mandatory. -- -- This table replaces the ifExtnsTestTable -- ifTestTable OBJECT-TYPE SYNTAX SEQUENCE OF IfTestEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains one entry per interface. It defines objects which allow a network manager to instruct an agent to test an interface for various faults. Tests for an interface are defined in the media-specific MIB for that interface. After invoking a test, the object ifTestResult can be read to determine the outcome. If an agent can not perform the test, ifTestResult is set to so indicate. The object ifTestCode can be used to provide further test-specific or interface-specific (or even enterprise-specific) information concerning the outcome of the test. Only one test can be in progress on each interface at any one time. If one test is in progress when another test is invoked, the second test is rejected. Some agents may reject a test when a prior test is active on another interface. Before starting a test, a manager-station must first obtain 'ownership' of the entry in the ifTestTable for the interface to be tested. This is accomplished with the ifTestId and ifTestStatus objects as follows: try_again: get (ifTestId, ifTestStatus) while (ifTestStatus != notInUse) /* * Loop while a test is running or some other * manager is configuring a test. */ short delay get (ifTestId, ifTestStatus) } /* * Is not being used right now -- let's compete * to see who gets it. */ lock_value = ifTestId if ( set(ifTestId = lock_value, ifTestStatus = inUse, ifTestOwner = 'my-IP-address') == FAILURE) /* * Another manager got the ifTestEntry -- go * try again */ goto try_again; /* * I have the lock */ set up any test parameters. /* * This starts the test */ set(ifTestType = test_to_run); wait for test completion by polling ifTestResult when test completes, agent sets ifTestResult agent also sets ifTestStatus = 'notInUse' retrieve any additional test results, and ifTestId if (ifTestId == lock_value+1) results are valid A manager station first retrieves the value of the appropriate ifTestId and ifTestStatus objects, periodically repeating the retrieval if necessary, until the value of ifTestStatus is 'notInUse'. The manager station then tries to set the same ifTestId object to the value it just retrieved, the same ifTestStatus object to 'inUse', and the corresponding ifTestOwner object to a value indicating itself. If the set operation succeeds then the manager has obtained ownership of the ifTestEntry, and the value of the ifTestId object is incremented by the agent (per the semantics of TestAndIncr). Failure of the set operation indicates that some other manager has obtained ownership of the ifTestEntry. Once ownership is obtained, any test parameters can be setup, and then the test is initiated by setting ifTestType. On completion of the test, the agent sets ifTestStatus to 'notInUse'. Once this occurs, the manager can retrieve the results. In the (rare) event that the invocation of tests by two network managers were to overlap, then there would be a possibility that the first test's results might be overwritten by the second test's results prior to the first results being read. This unlikely circumstance can be detected by a network manager retrieving ifTestId at the same time as retrieving the test results, and ensuring that the results are for the desired request. If ifTestType is not set within an abnormally long period of time after ownership is obtained, the agent should time-out the manager, and reset the value of the ifTestStatus object back to 'notInUse'. It is suggested that this time-out period be 5 minutes. In general, a management station must not retransmit a request to invoke a test for which it does not receive a response; instead, it properly inspects an agent's MIB to determine if the invocation was successful. Only if the invocation was unsuccessful, is the invocation request retransmitted. Some tests may require the interface to be taken off- line in order to execute them, or may even require the agent to reboot after completion of the test. In these circumstances, communication with the management station invoking the test may be lost until after completion of the test. An agent is not required to support such tests. However, if such tests are supported, then the agent should make every effort to transmit a response to the request which invoked the test prior to losing communication. When the agent is restored to normal service, the results of the test are properly made available in the appropriate objects. Note that this requires that the ifIndex value assigned to an interface must be unchanged even if the test causes a reboot. An agent must reject any test for which it cannot, perhaps due to resource constraints, make available at least the minimum amount of information after that test completes." ::= { ifMIBObjects 3 } ifTestEntry OBJECT-TYPE SYNTAX IfTestEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing objects for invoking tests on an interface." AUGMENTS { ifEntry } ::= { ifTestTable 1 } IfTestEntry ::= SEQUENCE { ifTestId TestAndIncr, ifTestStatus INTEGER, ifTestType AutonomousType, ifTestResult INTEGER, ifTestCode OBJECT IDENTIFIER, ifTestOwner OwnerString } ifTestId OBJECT-TYPE SYNTAX TestAndIncr MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the current invocation of the interface's test." ::= { ifTestEntry 1 } ifTestStatus OBJECT-TYPE SYNTAX INTEGER { notInUse(1), inUse(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether or not some manager currently has the necessary 'ownership' required to invoke a test on this interface. A write to this object is only successful when it changes its value from 'notInUse(1)' to 'inUse(2)'. After completion of a test, the agent resets the value back to 'notInUse(1)'." ::= { ifTestEntry 2 } ifTestType OBJECT-TYPE SYNTAX AutonomousType MAX-ACCESS read-write STATUS current DESCRIPTION "A control variable used to start and stop operator- initiated interface tests. Most OBJECT IDENTIFIER values assigned to tests are defined elsewhere, in association with specific types of interface. However, this document assigns a value for a full- duplex loopback test, and defines the special meanings of the subject identifier: noTest OBJECT IDENTIFIER ::= { 0 0 } When the value noTest is written to this object, no action is taken unless a test is in progress, in which case the test is aborted. Writing any other value to this object is only valid when no test is currently in progress, in which case the indicated test is initiated. When read, this object always returns the most recent value that ifTestType was set to. If it has not been set since the last initialization of the network management subsystem on the agent, a value of noTest is returned." ::= { ifTestEntry 3 } ifTestResult OBJECT-TYPE SYNTAX INTEGER { none(1), -- no test yet requested success(2), inProgress(3), notSupported(4), unAbleToRun(5), -- due to state of system aborted(6), failed(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the result of the most recently requested test, or the value none(1) if no tests have been requested since the last reset. Note that this facility provides no provision for saving the results of one test when starting another, as could be required if used by multiple managers concurrently." ::= { ifTestEntry 4 } ifTestCode OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains a code which contains more specific information on the test result, for example an error-code after a failed test. Error codes and other values this object may take are specific to the type of interface and/or test. The value may have the semantics of either the AutonomousType or InstancePointer textual conventions as defined in RFC 1443. The identifier: testCodeUnknown OBJECT IDENTIFIER ::= { 0 0 } is defined for use if no additional result code is available." ::= { ifTestEntry 5 } ifTestOwner OBJECT-TYPE SYNTAX OwnerString MAX-ACCESS read-write STATUS current DESCRIPTION "The entity which currently has the 'ownership' required to invoke a test on this interface." ::= { ifTestEntry 6 } -- Generic Receive Address Table -- -- This group of objects is mandatory for all types of -- interfaces which can receive packets/frames addressed to -- more than one address. -- -- This table replaces the ifExtnsRcvAddr table. The main -- difference is that this table makes use of the RowStatus -- textual convention, while ifExtnsRcvAddr did not. ifRcvAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF IfRcvAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains an entry for each address (broadcast, multicast, or uni-cast) for which the system will receive packets/frames on a particular interface, except as follows: - for an interface operating in promiscuous mode, entries are only required for those addresses for which the system would receive frames were it not operating in promiscuous mode. - for 802.5 functional addresses, only one entry is required, for the address which has the functional address bit ANDed with the bit mask of all functional addresses for which the interface will accept frames." ::= { ifMIBObjects 4 } ifRcvAddressEntry OBJECT-TYPE SYNTAX IfRcvAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of objects identifying an address for which the system will accept packets/frames on the particular interface identified by the index value ifIndex." INDEX { ifIndex, ifRcvAddressAddress } ::= { ifRcvAddressTable 1 } IfRcvAddressEntry ::= SEQUENCE { ifRcvAddressAddress PhysAddress, ifRcvAddressStatus RowStatus, ifRcvAddressType INTEGER } ifRcvAddressAddress OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-create STATUS current DESCRIPTION "An address for which the system will accept packets/frames on this entry's interface." ::= { ifRcvAddressEntry 1 } ifRcvAddressStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to create and delete rows in the ifRcvAddressTable." ::= { ifRcvAddressEntry 2 } ifRcvAddressType OBJECT-TYPE SYNTAX INTEGER { other(1), volatile(2), nonVolatile(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object has the value nonVolatile(3) for those entries in the table which are valid and will not be deleted by the next restart of the managed system. Entries having the value volatile(2) are valid and exist, but have not been saved, so that will not exist after the next restart of the managed system. Entries having the value other(1) are valid and exist but are not classified as to whether they will continue to exist after the next restart." DEFVAL { volatile } ::= { ifRcvAddressEntry 3 } -- definition of interface-related traps. linkDown NOTIFICATION-TYPE OBJECTS { ifIndex, ifAdminStatus, ifOperStatus } STATUS current DESCRIPTION "A linkDown trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links is about to transition into the down state." ::= { snmpTraps 3 } linkUp NOTIFICATION-TYPE OBJECTS { ifIndex, ifAdminStatus, ifOperStatus } STATUS current DESCRIPTION "A linkUp trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links has transitioned out of the down state." ::= { snmpTraps 4 } -- conformance information ifConformance OBJECT IDENTIFIER ::= { ifMIB 2 } ifGroups OBJECT IDENTIFIER ::= { ifConformance 1 } ifCompliances OBJECT IDENTIFIER ::= { ifConformance 2 } -- compliance statements ifCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMPv2 entities which have network interfaces." MODULE -- this module MANDATORY-GROUPS { ifGeneralGroup, ifStackGroup } GROUP ifFixedLengthGroup DESCRIPTION "This group is mandatory for all network interfaces which are character-oriented or transmit data in fixed-length transmission units." GROUP ifHCFixedLengthGroup DESCRIPTION "This group is mandatory only for those network interfaces which are character-oriented or transmit data in fixed-length transmission units, and for which the value of the corresponding instance of ifSpeed is greater than 20,000,000 bits/second." GROUP ifPacketGroup DESCRIPTION "This group is mandatory for all network interfaces which are packet-oriented." GROUP ifHCPacketGroup DESCRIPTION "This group is mandatory only for those network interfaces which are packet-oriented and for which the value of the corresponding instance of ifSpeed is greater than 650,000,000 bits/second." GROUP ifTestGroup DESCRIPTION "This group is optional. Media-specific MIBs which require interface tests are strongly encouraged to use this group for invoking tests and reporting results. A medium specific MIB which has mandatory tests may make implementation of this group mandatory." GROUP ifRcvAddressGroup DESCRIPTION "The applicability of this group MUST be defined by the media-specific MIBs. Media-specific MIBs must define the exact meaning, use, and semantics of the addresses in this group." OBJECT ifLinkUpDownTrapEnable MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT ifPromiscuousMode MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT ifStackStatus SYNTAX INTEGER { active(1) } -- subset of RowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1)." OBJECT ifAdminStatus SYNTAX INTEGER { up(1), down(2) } MIN-ACCESS read-only DESCRIPTION "Write access is not required, nor is support for the value testing(3)." ::= { ifCompliances 1 } -- units of conformance ifGeneralGroup OBJECT-GROUP OBJECTS { ifDescr, ifType, ifSpeed, ifPhysAddress, ifAdminStatus, ifOperStatus, ifLastChange, ifLinkUpDownTrapEnable, ifConnectorPresent, ifHighSpeed, ifName } STATUS current DESCRIPTION "A collection of objects providing information applicable to all network interfaces." ::= { ifGroups 1 } -- the following five groups are mutually exclusive; at most -- one of these groups is implemented for any interface ifFixedLengthGroup OBJECT-GROUP OBJECTS { ifInOctets, ifOutOctets, ifInUnknownProtos, ifInErrors, ifOutErrors } STATUS current DESCRIPTION "A collection of objects providing information specific to non-high speed, character-oriented or fixed-length-transmission network interfaces. (Non- high speed interfaces transmit and receive at speeds less than or equal to 20,000,000 bits/second.)" ::= { ifGroups 2 } ifHCFixedLengthGroup OBJECT-GROUP OBJECTS { ifHCInOctets, ifHCOutOctets, ifInOctets, ifOutOctets, ifInUnknownProtos, ifInErrors, ifOutErrors } STATUS current DESCRIPTION "A collection of objects providing information specific to high speed (greater than 20,000,000 bits/second) character-oriented or fixed-length- transmission network interfaces." ::= { ifGroups 3 } ifPacketGroup OBJECT-GROUP OBJECTS { ifInOctets, ifOutOctets, ifInUnknownProtos, ifInErrors, ifOutErrors, ifMtu, ifInUcastPkts, ifInMulticastPkts, ifInBroadcastPkts, ifInDiscards, ifOutUcastPkts, ifOutMulticastPkts, ifOutBroadcastPkts, ifOutDiscards, ifPromiscuousMode } STATUS current DESCRIPTION "A collection of objects providing information specific to non-high speed, packet-oriented network interfaces. (Non-high speed interfaces transmit and receive at speeds less than or equal to 20,000,000 bits/second.)" ::= { ifGroups 4 } ifHCPacketGroup OBJECT-GROUP OBJECTS { ifHCInOctets, ifHCOutOctets, ifInOctets, ifOutOctets, ifInUnknownProtos, ifInErrors, ifOutErrors, ifMtu, ifInUcastPkts, ifInMulticastPkts, ifInBroadcastPkts, ifInDiscards, ifOutUcastPkts, ifOutMulticastPkts, ifOutBroadcastPkts, ifOutDiscards, ifPromiscuousMode } STATUS current DESCRIPTION "A collection of objects providing information specific to high speed (greater than 20,000,000 bits/second but less than or equal to 650,000,000 bits/second) packet-oriented network interfaces." ::= { ifGroups 5 } ifVHCPacketGroup OBJECT-GROUP OBJECTS { ifHCInUcastPkts, ifHCInMulticastPkts, ifHCInBroadcastPkts, ifHCOutUcastPkts, ifHCOutMulticastPkts, ifHCOutBroadcastPkts, ifHCInOctets, ifHCOutOctets, ifInOctets, ifOutOctets, ifInUnknownProtos, ifInErrors, ifOutErrors, ifMtu, ifInUcastPkts, ifInMulticastPkts, ifInBroadcastPkts, ifInDiscards, ifOutUcastPkts, ifOutMulticastPkts, ifOutBroadcastPkts, ifOutDiscards, ifPromiscuousMode } STATUS current DESCRIPTION "A collection of objects providing information specific to higher speed (greater than 650,000,000 bits/second) packet-oriented network interfaces." ::= { ifGroups 6 } ifRcvAddressGroup OBJECT-GROUP OBJECTS { ifRcvAddressStatus, ifRcvAddressType } STATUS current DESCRIPTION "A collection of objects providing information on the multiple addresses which an interface receives." ::= { ifGroups 7 } ifTestGroup OBJECT-GROUP OBJECTS { ifTestId, ifTestStatus, ifTestType, ifTestResult, ifTestCode, ifTestOwner } STATUS current DESCRIPTION "A collection of objects providing the ability to invoke tests on an interface." ::= { ifGroups 8 } ifStackGroup OBJECT-GROUP OBJECTS { ifStackStatus } STATUS current DESCRIPTION "A collection of objects providing information on the layering of MIB-II interfaces." ::= { ifGroups 9 } END SONET-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Gauge32, Integer32 FROM SNMPv2-SMI DisplayString FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF ifIndex, transmission FROM RFC1213-MIB; -- This is the MIB module for the SMDS Interface objects. sonetMIB MODULE-IDENTITY LAST-UPDATED "9401030000Z" ORGANIZATION "IETF AToM MIB Working Group" CONTACT-INFO " Tracy Brown Postal: Bell Communications Research 331 Newman Springs Road P.O. Box 7020 Red Bank, NJ 07701-7020 US Tel: +1 908 758 2107 Fax: +1 908 758 4177 E-mail: tacox@mail.bellcore.com Kaj Tesink Postal: Bell Communications Research 331 Newman Springs Road P.O. Box 7020 Red Bank, NJ 07701-7020 US Tel: +1 908 758 5254 Fax: +1 908 758 4196 E-mail: kaj@cc.bellcore.com" DESCRIPTION "The MIB module to describe SONET/SDH interfaces objects." ::= { transmission 39 } -- This is the MIB module for the SONET/SDH objects sonetObjects OBJECT IDENTIFIER ::= { sonetMIB 1 } sonetObjectsPath OBJECT IDENTIFIER ::= { sonetMIB 2 } sonetObjectsVT OBJECT IDENTIFIER ::= { sonetMIB 3 } -- groups in the SONET/SDH MIB module sonetMedium OBJECT IDENTIFIER ::= { sonetObjects 1 } sonetSection OBJECT IDENTIFIER ::= { sonetObjects 2 } sonetLine OBJECT IDENTIFIER ::= { sonetObjects 3 } sonetFarEndLine OBJECT IDENTIFIER ::= { sonetObjects 4 } sonetPath OBJECT IDENTIFIER ::= { sonetObjectsPath 1 } sonetFarEndPath OBJECT IDENTIFIER ::= { sonetObjectsPath 2 } sonetVT OBJECT IDENTIFIER ::= { sonetObjectsVT 1 } sonetFarEndVT OBJECT IDENTIFIER ::= { sonetObjectsVT 2 } -- the SONET/SDH Medium group -- SONET/SDH interfaces for some applications may be -- electrical interfaces and not optical interfaces. -- This group handles the configuration information for -- both optical SONET/SDH interfaces and electrical -- SONET/SDH interfaces. sonetMediumTable OBJECT-TYPE SYNTAX SEQUENCE OF SonetMediumEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The SONET/SDH Medium table." ::= { sonetMedium 1 } sonetMediumEntry OBJECT-TYPE SYNTAX SonetMediumEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the SONET/SDH Medium table." INDEX { ifIndex } ::= { sonetMediumTable 1 } SonetMediumEntry ::= SEQUENCE { sonetMediumType INTEGER, sonetMediumTimeElapsed Integer32, sonetMediumValidIntervals Integer32, sonetMediumLineCoding INTEGER, sonetMediumLineType INTEGER, sonetMediumCircuitIdentifier DisplayString } sonetMediumType OBJECT-TYPE SYNTAX INTEGER { sonet(1), sdh(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This variable identifies whether a SONET or a SDH signal is used across this interface." ::= { sonetMediumEntry 1 } sonetMediumTimeElapsed OBJECT-TYPE SYNTAX Integer32 (1..900) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds, including partial seconds, that have elapsed since the beginning of the current error-measurement period." ::= { sonetMediumEntry 2 } sonetMediumValidIntervals OBJECT-TYPE SYNTAX Integer32 (0..96) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of previous intervals for which valid data has been stored. A SONET device must support at least n intervals. The minimum value of n is 4. The default of n is 32. The maximum value of n is 96. The value of this object will be n unless the device was brought online within the last (nx15) minutes, in which case the value will be the number of complete 15 minute intervals the device has been online." ::= { sonetMediumEntry 3 } sonetMediumLineCoding OBJECT-TYPE SYNTAX INTEGER { sonetMediumOther(1), sonetMediumB3ZS(2), sonetMediumCMI(3), sonetMediumNRZ(4), sonetMediumRZ(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This variable describes the line coding for this interface. The B3ZS and CMI are used for electrical SONET/SDH signals (STS-1 and STS-3). The Non-Return to Zero (NRZ) and the Return to Zero are used for optical SONET/SDH signals." ::= { sonetMediumEntry 4 } sonetMediumLineType OBJECT-TYPE SYNTAX INTEGER { sonetOther(1), sonetShortSingleMode(2), sonetLongSingleMode(3), sonetMultiMode(4), sonetCoax(5), sonetUTP(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "This variable describes the line type for this interface. The line types are Short and Long Range Single Mode fiber or Multi-Mode fiber interfaces, and coax and UTP for electrical interfaces. The value sonetOther should be used when the Line Type is not one of the listed values." ::= { sonetMediumEntry 5 } sonetMediumCircuitIdentifier OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting." ::= { sonetMediumEntry 6 } -- the SONET/SDH Section group -- this group consists of 2 tables: -- - the SONET/SDH Section Current Table -- - the SONET/SDH Section Interval Table -- the SONET/SDH Section Current Table -- The SONET/SDH Section -- current table contains various statistics -- being collected for the current 15 minute interval. sonetSectionCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF SonetSectionCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The SONET/SDH Section Current table." ::= { sonetSection 1 } sonetSectionCurrentEntry OBJECT-TYPE SYNTAX SonetSectionCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the SONET/SDH Section Current table." INDEX { ifIndex } ::= { sonetSectionCurrentTable 1 } SonetSectionCurrentEntry ::= SEQUENCE { sonetSectionCurrentStatus Integer32, sonetSectionCurrentESs Gauge32, sonetSectionCurrentSESs Gauge32, sonetSectionCurrentSEFSs Gauge32, sonetSectionCurrentCVs Gauge32 } sonetSectionCurrentStatus OBJECT-TYPE SYNTAX Integer32 (1..6) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the status of the interface. The sonetSectionCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The sonetSectionNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 sonetSectionNoDefect 2 sonetSectionLOS 4 sonetSectionLOF" ::= { sonetSectionCurrentEntry 1 } sonetSectionCurrentESs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Errored Seconds encountered by a SONET/SDH Section in the current 15 minute interval." ::= { sonetSectionCurrentEntry 2 } sonetSectionCurrentSESs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Section in the current 15 minute interval." ::= { sonetSectionCurrentEntry 3 } sonetSectionCurrentSEFSs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Severely Errored Framing Seconds encountered by a SONET/SDH Section in the current 15 minute interval." ::= { sonetSectionCurrentEntry 4 } sonetSectionCurrentCVs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Coding Violations encountered by a SONET/SDH Section in the current 15 minute interval." ::= { sonetSectionCurrentEntry 5 } -- the SONET/SDH Section Interval Table -- The SONET/SDH Section Interval Table -- contains various statistics -- collected by each system over a maximum -- of the previous 24 hours of -- operation. The past 24 hours may be broken into 96 -- completed 15 minute intervals. -- A system is required to store at -- least 4 completed 15 minute interval. -- The default value is 32 intervals. sonetSectionIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF SonetSectionIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The SONET/SDH Section Interval table." ::= { sonetSection 2 } sonetSectionIntervalEntry OBJECT-TYPE SYNTAX SonetSectionIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the SONET/SDH Section Interval table." INDEX { ifIndex, sonetSectionIntervalNumber } ::= { sonetSectionIntervalTable 1 } SonetSectionIntervalEntry ::= SEQUENCE { sonetSectionIntervalNumber Integer32, sonetSectionIntervalESs Gauge32, sonetSectionIntervalSESs Gauge32, sonetSectionIntervalSEFSs Gauge32, sonetSectionIntervalCVs Gauge32 } sonetSectionIntervalNumber OBJECT-TYPE SYNTAX Integer32 (1..96) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1." ::= { sonetSectionIntervalEntry 1 } sonetSectionIntervalESs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Errored Seconds encountered by a SONET/SDH Section in a particular 15-minute interval in the past 24 hours." ::= { sonetSectionIntervalEntry 2 } sonetSectionIntervalSESs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Section in a particular 15-minute interval in the past 24 hours." ::= { sonetSectionIntervalEntry 3 } sonetSectionIntervalSEFSs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Severely Errored Framing Seconds encountered by a SONET/SDH Section in a particular 15-minute interval in the past 24 hours." ::= { sonetSectionIntervalEntry 4 } sonetSectionIntervalCVs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Coding Violations encountered by a SONET/SDH Section in a particular 15-minute interval in the past 24 hours." ::= { sonetSectionIntervalEntry 5 } -- the SONET/SDH Line group -- this group consists of 2 tables: -- - the SONET/SDH Line Current Table -- - the SONET/SDH Line Interval Table -- the SONET/SDH Line Current Table -- The SONET/SDH Line -- current table contains various statistics -- being collected for the current 15 minute interval. sonetLineCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF SonetLineCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The SONET/SDH Line Current table." ::= { sonetLine 1 } sonetLineCurrentEntry OBJECT-TYPE SYNTAX SonetLineCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the SONET/SDH Line Current table." INDEX { ifIndex } ::= { sonetLineCurrentTable 1 } SonetLineCurrentEntry ::= SEQUENCE { sonetLineCurrentStatus Integer32, sonetLineCurrentESs Gauge32, sonetLineCurrentSESs Gauge32, sonetLineCurrentCVs Gauge32, sonetLineCurrentUASs Gauge32 } sonetLineCurrentStatus OBJECT-TYPE SYNTAX Integer32 (1..6) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the status of the interface. The sonetLineCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The sonetLineNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 sonetLineNoDefect 2 sonetLineAIS 4 sonetLineRDI" ::= { sonetLineCurrentEntry 1 } sonetLineCurrentESs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Errored Seconds encountered by a SONET/SDH Line in the current 15 minute interval." ::= { sonetLineCurrentEntry 2 } sonetLineCurrentSESs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Line in the current 15 minute interval." ::= { sonetLineCurrentEntry 3 } sonetLineCurrentCVs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Coding Violations encountered by a SONET/SDH Line in the current 15 minute interval." ::= { sonetLineCurrentEntry 4 } sonetLineCurrentUASs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Unavailable Seconds encountered by a SONET/SDH Line in the current 15 minute interval." ::= { sonetLineCurrentEntry 5 } -- the SONET/SDH Line Interval Table -- The SONET/SDH Line Interval Table -- contains various statistics -- collected by each system over a maximum -- of the previous 24 hours of -- operation. The past 24 hours may be broken into 96 -- completed 15 minute intervals. -- A system is required to store at -- least 4 completed 15 minute interval. -- The default value is 32 intervals. sonetLineIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF SonetLineIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The SONET/SDH Line Interval table." ::= { sonetLine 2 } sonetLineIntervalEntry OBJECT-TYPE SYNTAX SonetLineIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the SONET/SDH Line Interval table." INDEX { ifIndex, sonetLineIntervalNumber } ::= { sonetLineIntervalTable 1 } SonetLineIntervalEntry ::= SEQUENCE { sonetLineIntervalNumber Integer32, sonetLineIntervalESs Gauge32, sonetLineIntervalSESs Gauge32, sonetLineIntervalCVs Gauge32, sonetLineIntervalUASs Gauge32 } sonetLineIntervalNumber OBJECT-TYPE SYNTAX Integer32 (1..96) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1." ::= { sonetLineIntervalEntry 1 } sonetLineIntervalESs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Errored Seconds encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours." ::= { sonetLineIntervalEntry 2 } sonetLineIntervalSESs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours." ::= { sonetLineIntervalEntry 3 } sonetLineIntervalCVs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Coding Violations encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours." ::= { sonetLineIntervalEntry 4 } sonetLineIntervalUASs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Unavailable Seconds encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours." ::= { sonetLineIntervalEntry 5 } -- The SONET/SDH Far End Line group. -- This group may only be implemented by SONET/SDH (LTEs) -- systems that provide for a far end block error (FEBE) -- information at the SONET/SDH Line Layer. -- This group consists of two tables: -- SONET/SDH Far End Line Current Table -- SONET/SDH Far End Line Interval Table -- The SONET/SDH Far End Line Current Table -- The SONET/SDH Far End Line Current table contains -- various statistics being -- collected for the current 15 minute interval. -- The statistics are collected from the far end -- block error code (FEBE) -- within the third Z2 byte of the Line Overhead -- in Broadband ISDN applications. -- The definitions are the same as described for -- the near-end information. sonetFarEndLineCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF SonetFarEndLineCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The SONET/SDH Far End Line Current table." ::= { sonetFarEndLine 1 } sonetFarEndLineCurrentEntry OBJECT-TYPE SYNTAX SonetFarEndLineCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the SONET/SDH Far End Line Current table." INDEX { ifIndex } ::= { sonetFarEndLineCurrentTable 1 } SonetFarEndLineCurrentEntry ::= SEQUENCE { sonetFarEndLineCurrentESs Gauge32, sonetFarEndLineCurrentSESs Gauge32, sonetFarEndLineCurrentCVs Gauge32, sonetFarEndLineCurrentUASs Gauge32 } sonetFarEndLineCurrentESs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Far Far End Errored Seconds encountered by a SONET/SDH interface in the current 15 minute interval." ::= { sonetFarEndLineCurrentEntry 1 } sonetFarEndLineCurrentSESs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Far End Severely Errored Seconds encountered by a SONET/SDH Medium/Section/Line interface in the current 15 minute interval." ::= { sonetFarEndLineCurrentEntry 2 } sonetFarEndLineCurrentCVs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Far End Coding Violations reported via the far end block error count encountered by a SONET/SDH Medium/Section/Line interface in the current 15 minute interval." ::= { sonetFarEndLineCurrentEntry 3 } sonetFarEndLineCurrentUASs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Far End Unavailable Seconds encountered by a SONET/SDH Medium/Section/Line interface in the current 15 minute interval." ::= { sonetFarEndLineCurrentEntry 4 } -- The SONET/SDH Far End Line Interval Table -- The SONET/SDH Far End Line Interval Table -- contains various statistics -- collected by each system over a maximum -- of the previous 24 hours of -- operation. The past 24 hours may be broken into 96 -- completed 15 minute intervals. -- A system is required to store at -- least 4 completed 15 minute interval. -- The default value is 32 intervals. sonetFarEndLineIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF SonetFarEndLineIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The SONET/SDH Far End Line Interval table." ::= { sonetFarEndLine 2 } sonetFarEndLineIntervalEntry OBJECT-TYPE SYNTAX SonetFarEndLineIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the SONET/SDH Far End Line Interval table." INDEX { ifIndex, sonetFarEndLineIntervalNumber } ::= { sonetFarEndLineIntervalTable 1 } SonetFarEndLineIntervalEntry ::= SEQUENCE { sonetFarEndLineIntervalNumber Integer32, sonetFarEndLineIntervalESs Gauge32, sonetFarEndLineIntervalSESs Gauge32, sonetFarEndLineIntervalCVs Gauge32, sonetFarEndLineIntervalUASs Gauge32 } sonetFarEndLineIntervalNumber OBJECT-TYPE SYNTAX Integer32 (1..96) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1." ::= { sonetFarEndLineIntervalEntry 1 } sonetFarEndLineIntervalESs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Far End Errored Seconds encountered by a SONET/SDH Line interface in a particular 15-minute interval in the past 24 hours." ::= { sonetFarEndLineIntervalEntry 2 } sonetFarEndLineIntervalSESs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Far End Severely Errored Seconds encountered by a SONET/SDH Line interface in a particular 15-minute interval in the past 24 hours." ::= { sonetFarEndLineIntervalEntry 3 } sonetFarEndLineIntervalCVs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Far End Coding Violations reported via the far end block error count encountered by a SONET/SDH Line interface in a particular 15-minute interval in the past 24 hours." ::= { sonetFarEndLineIntervalEntry 4 } sonetFarEndLineIntervalUASs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Far End Unavailable Seconds encountered by a SONET/SDH Line interface in a particular 15-minute interval in the past 24 hours." ::= { sonetFarEndLineIntervalEntry 5 } -- the SONET/SDH Path group -- this group consists of 2 tables: -- - the SONET/SDH Path Current Table -- - the SONET/SDH Path Interval Table -- the SONET/SDH Path Current Table -- The SONET/SDH Path -- current table contains various statistics -- being collected for the current 15 minute interval. sonetPathCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF SonetPathCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The SONET/SDH Path Current table." ::= { sonetPath 1 } sonetPathCurrentEntry OBJECT-TYPE SYNTAX SonetPathCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the SONET/SDH Path Current table." INDEX { ifIndex } ::= { sonetPathCurrentTable 1 } SonetPathCurrentEntry ::= SEQUENCE { sonetPathCurrentWidth INTEGER, sonetPathCurrentStatus Integer32, sonetPathCurrentESs Gauge32, sonetPathCurrentSESs Gauge32, sonetPathCurrentCVs Gauge32, sonetPathCurrentUASs Gauge32 } sonetPathCurrentWidth OBJECT-TYPE SYNTAX INTEGER { sts1(1), sts3cSTM1(2), sts12cSTM4(3), sts24c(4), sts48cSTM16(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "A value that indicates the type of the SONET/SDH Path. For SONET, the assigned types are the STS-Nc SPEs, where N = 1, 3, 12, 24, and 48. STS-1 is equal to 51.84 Mbps. For SDH, the assigned types are the STM-Nc VCs, where N = 1, 4, and 16." ::= { sonetPathCurrentEntry 1 } sonetPathCurrentStatus OBJECT-TYPE SYNTAX Integer32 (1..14) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the status of the interface. The sonetPathCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The sonetPathNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 sonetPathNoDefect 2 sonetPathSTSLOP 4 sonetPathSTSAIS 8 sonetPathSTSRDI 16 sonetPathUnequipped 32 sonetPathSignalLabelMismatch" ::= { sonetPathCurrentEntry 2 } sonetPathCurrentESs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Errored Seconds encountered by a SONET/SDH Path in the current 15 minute interval." ::= { sonetPathCurrentEntry 3 } sonetPathCurrentSESs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Path in the current 15 minute interval." ::= { sonetPathCurrentEntry 4 } sonetPathCurrentCVs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Coding Violations encountered by a SONET/SDH Path in the current 15 minute interval." ::= { sonetPathCurrentEntry 5 } sonetPathCurrentUASs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Unavailable Seconds encountered by a Path in the current 15 minute, interval." ::= { sonetPathCurrentEntry 6 } -- the SONET/SDH Path Interval Table -- The SONET/SDH Path Interval Table -- contains various statistics -- collected by each system over a maximum -- of the previous 24 hours of -- operation. The past 24 hours may be broken into 96 -- completed 15 minute intervals. -- A system is required to store at -- least 4 completed 15 minute interval. -- The default value is 32 intervals. sonetPathIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF SonetPathIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The SONET/SDH Path Interval table." ::= { sonetPath 2 } sonetPathIntervalEntry OBJECT-TYPE SYNTAX SonetPathIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the SONET/SDH Path Interval table." INDEX { ifIndex, sonetPathIntervalNumber } ::= { sonetPathIntervalTable 1 } SonetPathIntervalEntry ::= SEQUENCE { sonetPathIntervalNumber Integer32, sonetPathIntervalESs Gauge32, sonetPathIntervalSESs Gauge32, sonetPathIntervalCVs Gauge32, sonetPathIntervalUASs Gauge32 } sonetPathIntervalNumber OBJECT-TYPE SYNTAX Integer32 (1..96) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1." ::= { sonetPathIntervalEntry 1 } sonetPathIntervalESs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Errored Seconds encountered by a SONET/SDH Path in a particular 15-minute interval in the past 24 hours." ::= { sonetPathIntervalEntry 2 } sonetPathIntervalSESs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Path in a particular 15-minute interval in the past 24 hours." ::= { sonetPathIntervalEntry 3 } sonetPathIntervalCVs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Coding Violations encountered by a SONET/SDH Path in a particular 15-minute interval in the past 24 hours." ::= { sonetPathIntervalEntry 4 } sonetPathIntervalUASs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Unavailable Seconds encountered by a Path in a particular 15-minute interval in the past 24 hours." ::= { sonetPathIntervalEntry 5 } -- The SONET/SDH Far End Path group -- This group consists of two tables: -- - SONET/SDH Far End Path Current Table -- - SONET/SDH Far End Path Interval Table -- The SONET/SDH Far End Path Current Table -- The SONET/SDH Far End Path Current table -- contains various statistics -- being collected for the current 15 minute interval. -- The statistics are collected from -- the far end block error code -- (FEBE) within the G1 byte of the Path Overhead. -- The definitions are the same as described for -- the near-end information. sonetFarEndPathCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF SonetFarEndPathCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The SONET/SDH Far End Path Current table." ::= { sonetFarEndPath 1 } sonetFarEndPathCurrentEntry OBJECT-TYPE SYNTAX SonetFarEndPathCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the SONET/SDH Far End Path Current table." INDEX { ifIndex } ::= { sonetFarEndPathCurrentTable 1 } SonetFarEndPathCurrentEntry ::= SEQUENCE { sonetFarEndPathCurrentESs Gauge32, sonetFarEndPathCurrentSESs Gauge32, sonetFarEndPathCurrentCVs Gauge32, sonetFarEndPathCurrentUASs Gauge32 } sonetFarEndPathCurrentESs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Far Far End Errored Seconds encountered by a SONET/SDH interface in the current 15 minute interval." ::= { sonetFarEndPathCurrentEntry 1 } sonetFarEndPathCurrentSESs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Far End Severely Errored Seconds encountered by a SONET/SDH Path interface in the current 15 minute interval." ::= { sonetFarEndPathCurrentEntry 2 } sonetFarEndPathCurrentCVs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Far End Coding Violations reported via the far end block error count encountered by a SONET/SDH Path interface in the current 15 minute interval." ::= { sonetFarEndPathCurrentEntry 3 } sonetFarEndPathCurrentUASs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Far End Unavailable Seconds encountered by a SONET/SDH Path interface in the current 15 minute interval." ::= { sonetFarEndPathCurrentEntry 4 } -- The SONET/SDH Far End Path Interval Table -- The SONET/SDH Far End Path Interval Table -- contains various statistics -- collected by each system over a maximum -- of the previous 24 hours of -- operation. The past 24 hours may be broken into 96 -- completed 15 minute intervals. -- A system is required to store at -- least 4 completed 15 minute interval. -- The default value is 32 intervals. sonetFarEndPathIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF SonetFarEndPathIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The SONET/SDH Far End Path Interval table." ::= { sonetFarEndPath 2 } sonetFarEndPathIntervalEntry OBJECT-TYPE SYNTAX SonetFarEndPathIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the SONET/SDH Far End Path Interval table." INDEX { ifIndex, sonetFarEndPathIntervalNumber } ::= { sonetFarEndPathIntervalTable 1 } SonetFarEndPathIntervalEntry ::= SEQUENCE { sonetFarEndPathIntervalNumber Integer32, sonetFarEndPathIntervalESs Gauge32, sonetFarEndPathIntervalSESs Gauge32, sonetFarEndPathIntervalCVs Gauge32, sonetFarEndPathIntervalUASs Gauge32 } sonetFarEndPathIntervalNumber OBJECT-TYPE SYNTAX Integer32 (1..96) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1." ::= { sonetFarEndPathIntervalEntry 1 } sonetFarEndPathIntervalESs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Far End Errored Seconds encountered by a SONET/SDH Path interface in a particular 15-minute interval in the past 24 hours." ::= { sonetFarEndPathIntervalEntry 2 } sonetFarEndPathIntervalSESs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Far End Severely Errored Seconds encountered by a SONET/SDH Path interface in a particular 15-minute interval in the past 24 hours." ::= { sonetFarEndPathIntervalEntry 3 } sonetFarEndPathIntervalCVs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Far End Coding Violations reported via the far end block error count encountered by a SONET/SDH Path interface in a particular 15-minute interval in the past 24 hours." ::= { sonetFarEndPathIntervalEntry 4 } sonetFarEndPathIntervalUASs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Far End Unavailable Seconds encountered by a SONET/SDH Path interface in a particular 15-minute interval in the past 24 hours." ::= { sonetFarEndPathIntervalEntry 5 } -- the SONET/SDH Virtual Tributary group -- this group consists of 2 tables: -- - the SONET/SDH VT Current Table -- - the SONET/SDH VT Interval Table -- For SDH signals, virtual tributaries are -- called VCs instead of VTs -- A VT1.5 = VC11 -- A VT2 = VC12 -- A VT3 = none -- A VT6 = VC3 -- the SONET/SDH VT Current Table -- The SONET/SDH VT current table -- contains various statistics -- being collected for the -- current 15 minute interval. sonetVTCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF SonetVTCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The SONET/SDH VT Current table." ::= { sonetVT 1 } sonetVTCurrentEntry OBJECT-TYPE SYNTAX SonetVTCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the SONET/SDH VT Current table." INDEX { ifIndex } ::= { sonetVTCurrentTable 1 } SonetVTCurrentEntry ::= SEQUENCE { sonetVTCurrentWidth INTEGER, sonetVTCurrentStatus Integer32, sonetVTCurrentESs Gauge32, sonetVTCurrentSESs Gauge32, sonetVTCurrentCVs Gauge32, sonetVTCurrentUASs Gauge32 } sonetVTCurrentWidth OBJECT-TYPE SYNTAX INTEGER { vtWidth15VC11(1), vtWidth2VC12(2), vtWidth3(3), vtWidth6VC2(4), vtWidth6c(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "A value that indicates the type of the SONET VT and SDH VC. Assigned widths are VT1.5/VC11, VT2/VC12, VT3, VT6/VC2, and VT6c." ::= { sonetVTCurrentEntry 1 } sonetVTCurrentStatus OBJECT-TYPE SYNTAX Integer32 (1..30) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the status of the interface. The sonetVTCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects and failures simultaneously. The sonetVTNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 sonetVTNoDefect 2 sonetVTLOP 4 sonetVTPathAIS 8 sonetVTPathRDI 16 sonetVTPathRFI 32 sonetVTUnequipped 64 sonetVTSignalLabelMismatch" ::= { sonetVTCurrentEntry 2 } sonetVTCurrentESs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Errored Seconds encountered by a SONET/SDH VT in the current 15 minute interval." ::= { sonetVTCurrentEntry 3 } sonetVTCurrentSESs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH VT in the current 15 minute interval." ::= { sonetVTCurrentEntry 4 } sonetVTCurrentCVs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Coding Violations encountered by a SONET/SDH VT in the current 15 minute interval." ::= { sonetVTCurrentEntry 5 } sonetVTCurrentUASs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Unavailable Seconds encountered by a VT in the current 15 minute, interval." ::= { sonetVTCurrentEntry 6 } -- the SONET/SDH VT Interval Table -- The SONET/SDH VT Interval Table -- contains various statistics -- collected by each system over a maximum -- of the previous 24 hours of -- operation. The past 24 hours may be broken into 96 -- completed 15 minute intervals. -- A system is required to store at -- least 4 completed 15 minute interval. -- The default value is 32 intervals. sonetVTIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF SonetVTIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The SONET/SDH VT Interval table." ::= { sonetVT 2 } sonetVTIntervalEntry OBJECT-TYPE SYNTAX SonetVTIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the SONET/SDH VT Interval table." INDEX { ifIndex, sonetVTIntervalNumber } ::= { sonetVTIntervalTable 1 } SonetVTIntervalEntry ::= SEQUENCE { sonetVTIntervalNumber Integer32, sonetVTIntervalESs Gauge32, sonetVTIntervalSESs Gauge32, sonetVTIntervalCVs Gauge32, sonetVTIntervalUASs Gauge32 } sonetVTIntervalNumber OBJECT-TYPE SYNTAX Integer32 (1..96) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1." ::= { sonetVTIntervalEntry 1 } sonetVTIntervalESs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Errored Seconds encountered by a SONET/SDH VT in a particular 15-minute interval in the past 24 hours." ::= { sonetVTIntervalEntry 2 } sonetVTIntervalSESs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH VT in a particular 15-minute interval in the past 24 hours." ::= { sonetVTIntervalEntry 3 } sonetVTIntervalCVs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Coding Violations encountered by a SONET/SDH VT in a particular 15-minute interval in the past 24 hours." ::= { sonetVTIntervalEntry 4 } sonetVTIntervalUASs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Unavailable Seconds encountered by a VT in a particular 15-minute interval in the past 24 hours." ::= { sonetVTIntervalEntry 5 } -- The SONET/SDH Far End VT group -- This group consists of two tables: -- SONET/SDH Far End VT Current Table -- SONET/SDH Far End VT Interval Table -- The SONET/SDH Far End VT Current -- The SONET/SDH Far End VT Current table -- contains various statistics -- being collected for the current 15 minute interval. -- The statistics are collected from -- the far end block error code -- (FEBE) within the G1 byte of the VT Overhead. -- The definitions are the same as described for -- the near-end information. sonetFarEndVTCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF SonetFarEndVTCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The SONET/SDH Far End VT Current table." ::= { sonetFarEndVT 1 } sonetFarEndVTCurrentEntry OBJECT-TYPE SYNTAX SonetFarEndVTCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the SONET/SDH Far End VT Current table." INDEX { ifIndex } ::= { sonetFarEndVTCurrentTable 1 } SonetFarEndVTCurrentEntry ::= SEQUENCE { sonetFarEndVTCurrentESs Gauge32, sonetFarEndVTCurrentSESs Gauge32, sonetFarEndVTCurrentCVs Gauge32, sonetFarEndVTCurrentUASs Gauge32 } sonetFarEndVTCurrentESs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Far Far End Errored Seconds encountered by a SONET/SDH interface in the current 15 minute interval." ::= { sonetFarEndVTCurrentEntry 1 } sonetFarEndVTCurrentSESs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Far End Severely Errored Seconds encountered by a SONET/SDH VT interface in the current 15 minute interval." ::= { sonetFarEndVTCurrentEntry 2 } sonetFarEndVTCurrentCVs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Far End Coding Violations reported via the far end block error count encountered by a SONET/SDH VT interface in the current 15 minute interval." ::= { sonetFarEndVTCurrentEntry 3 } sonetFarEndVTCurrentUASs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Far End Unavailable Seconds encountered by a SONET/SDH VT interface in the current 15 minute interval." ::= { sonetFarEndVTCurrentEntry 4 } -- The SONET/SDH Far End VT Interval Table -- The SONET/SDH Far End VT Interval Table -- contains various statistics -- collected by each system over a maximum -- of the previous 24 hours of -- operation. The past 24 hours may be broken into 96 -- completed 15 minute intervals. -- A system is required to store at -- least 4 completed 15 minute interval. -- The default value is 32 intervals. sonetFarEndVTIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF SonetFarEndVTIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The SONET/SDH Far End VT Interval table." ::= { sonetFarEndVT 2 } sonetFarEndVTIntervalEntry OBJECT-TYPE SYNTAX SonetFarEndVTIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the SONET/SDH Far End VT Interval table." INDEX { ifIndex, sonetFarEndVTIntervalNumber } ::= { sonetFarEndVTIntervalTable 1 } SonetFarEndVTIntervalEntry ::= SEQUENCE { sonetFarEndVTIntervalNumber Integer32, sonetFarEndVTIntervalESs Gauge32, sonetFarEndVTIntervalSESs Gauge32, sonetFarEndVTIntervalCVs Gauge32, sonetFarEndVTIntervalUASs Gauge32 } sonetFarEndVTIntervalNumber OBJECT-TYPE SYNTAX Integer32 (1..96) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1." ::= { sonetFarEndVTIntervalEntry 1 } sonetFarEndVTIntervalESs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Far End Errored Seconds encountered by a SONET/SDH VT interface in a particular 15-minute interval in the past 24 hours." ::= { sonetFarEndVTIntervalEntry 2 } sonetFarEndVTIntervalSESs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Far End Severely Errored Seconds encountered by a SONET/SDH VT interface in a particular 15-minute interval in the past 24 hours." ::= { sonetFarEndVTIntervalEntry 3 } sonetFarEndVTIntervalCVs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Far End Coding Violations reported via the far end block error count encountered by a SONET/SDH VT interface in a particular 15-minute interval in the past 24 hours." ::= { sonetFarEndVTIntervalEntry 4 } sonetFarEndVTIntervalUASs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter associated with the number of Far End Unavailable Seconds encountered by a SONET/SDH VT interface in a particular 15-minute interval in the past 24 hours." ::= { sonetFarEndVTIntervalEntry 5 } -- conformance information sonetConformance OBJECT IDENTIFIER ::= { sonetMIB 4 } sonetGroups OBJECT IDENTIFIER ::= { sonetConformance 1 } sonetCompliances OBJECT IDENTIFIER ::= { sonetConformance 2 } -- compliance statements sonetCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SONET/SDH interfaces." MODULE -- this module MANDATORY-GROUPS { sonetMediumStuff, sonetSectionStuff } GROUP sonetLineStuff DESCRIPTION "Implementation of this group is mandatory for all SONET/SDH systems that terminate SONET/SDH Lines, Paths or Virtual Tributaries." GROUP sonetFarEndLineStuff DESCRIPTION "Implementation of this group is optional for all SONET/SDH systems that terminate SONET/SDH Lines, Paths or Virtual Tributaries, and that provide for a far end block error (FEBE) information at the SONET/SDH Line Layer." GROUP sonetPathStuff DESCRIPTION "Implementation of this group is mandatory for all SONET/SDH systems that terminate SONET/SDH Paths or Virtual Tributaries." OBJECT sonetPathWidth MIN-ACCESS read-only DESCRIPTION "Write access is not required." GROUP sonetFarEndPathStuff DESCRIPTION "Implementation of this group is optional for all SONET/SDH systems that terminate SONET/SDH Paths or Virtual Tributaries, and that process Far End information." GROUP sonetVTStuff DESCRIPTION "Implementation of this group is mandatory for all SONET/SDH systems that terminate SONET/SDH Virtual Tributaries." OBJECT sonetVTWidth MIN-ACCESS read-only DESCRIPTION "Write access is not required." GROUP sonetFarEndVTStuff DESCRIPTION "Implementation of this group is optional for all SONET/SDH systems that terminate the SONET/SDH floating Virtual Tributaries, and that process Far End information." ::= { sonetCompliances 1 } -- units of conformance sonetMediumStuff OBJECT-GROUP OBJECTS { sonetMediumType, sonetMediumTimeElapsed, sonetMediumValidIntervals, sonetMediumLineCoding, sonetMediumLineType, sonetMediumCircuitIdentifier } STATUS current DESCRIPTION "A collection of objects providing configuration information applicable to all SONET/SDH interfaces." ::= { sonetGroups 1 } sonetSectionStuff OBJECT-GROUP OBJECTS { sonetSectionCurrentStatus, sonetSectionCurrentESs, sonetSectionCurrentSESs, sonetSectionCurrentSEFSs, sonetSectionCurrentCVs, sonetSectionIntervalESs, sonetSectionIntervalSESs, sonetSectionIntervalSEFSs, sonetSectionIntervalCVs } STATUS current DESCRIPTION "A collection of objects providing information specific to SONET/SDH Section interfaces." ::= { sonetGroups 2 } sonetLineStuff OBJECT-GROUP OBJECTS { sonetLineCurrentStatus, sonetLineCurrentESs, sonetLineCurrentSESs, sonetLineCurrentCVs, sonetLineCurrentUASs, sonetLineIntervalESs, sonetLineIntervalSESs, sonetLineIntervalCVs, sonetLineIntervalUASs } STATUS current DESCRIPTION "A collection of objects providing information specific to SONET/SDH Line interfaces." ::= { sonetGroups 3 } sonetFarEndLineStuff OBJECT-GROUP OBJECTS { sonetFarEndLineCurrentESs, sonetFarEndLineCurrentSESs, sonetFarEndLineCurrentCVs, sonetFarEndLineCurrentUASs, sonetFarEndLineIntervalESs, sonetFarEndLineIntervalSESs, sonetFarEndLineIntervalCVs, sonetFarEndLineIntervalUASs } STATUS current DESCRIPTION "A collection of objects providing information specific to SONET/SDH Line interfaces, and maintaining Line Far End information." ::= { sonetGroups 4 } sonetPathStuff OBJECT-GROUP OBJECTS { sonetPathCurrentWidth, sonetPathCurrentStatus, sonetPathCurrentESs, sonetPathCurrentSESs, sonetPathCurrentCVs, sonetPathCurrentUASs, sonetPathIntervalESs, sonetPathIntervalSESs, sonetPathIntervalCVs, sonetPathIntervalUASs } STATUS current DESCRIPTION "A collection of objects providing information specific to SONET/SDH Path interfaces." ::= { sonetGroups 5 } sonetFarEndPathStuff OBJECT-GROUP OBJECTS { sonetFarEndPathCurrentESs, sonetFarEndPathCurrentSESs, sonetFarEndPathCurrentCVs, sonetFarEndPathCurrentUASs, sonetFarEndPathIntervalESs, sonetFarEndPathIntervalSESs, sonetFarEndPathIntervalCVs, sonetFarEndPathIntervalUASs } STATUS current DESCRIPTION "A collection of objects providing information specific to SONET/SDH Path interfaces, and maintaining Path Far End information." ::= { sonetGroups 6 } sonetVTStuff OBJECT-GROUP OBJECTS { sonetVTCurrentWidth, sonetVTCurrentStatus, sonetVTCurrentESs, sonetVTCurrentSESs, sonetVTCurrentCVs, sonetVTCurrentUASs, sonetVTIntervalESs, sonetVTIntervalSESs, sonetVTIntervalCVs, sonetVTIntervalUASs } STATUS current DESCRIPTION "A collection of objects providing information specific to SONET/SDH VT interfaces." ::= { sonetGroups 7 } sonetFarEndVTStuff OBJECT-GROUP OBJECTS { sonetFarEndVTCurrentESs, sonetFarEndVTCurrentSESs, sonetFarEndVTCurrentCVs, sonetFarEndVTCurrentUASs, sonetFarEndVTIntervalESs, sonetFarEndVTIntervalSESs, sonetFarEndVTIntervalCVs, sonetFarEndVTIntervalUASs } STATUS current DESCRIPTION "A collection of objects providing information specific to SONET/SDH VT interfaces, and maintaining VT Far End information." ::= { sonetGroups 8 } END EtherLike-MIB DEFINITIONS ::= BEGIN IMPORTS Counter FROM RFC1155-SMI ifIndex, transmission FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212; -- This MIB module uses the extended OBJECT-TYPE macro as -- defined in RFC-1212. dot3 OBJECT IDENTIFIER ::= { transmission 7 } -- the Ethernet-like Statistics group dot3StatsTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot3StatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Statistics for a collection of ethernet-like interfaces attached to a particular system." ::= { dot3 2 } dot3StatsEntry OBJECT-TYPE SYNTAX Dot3StatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Statistics for a particular interface to an ethernet-like medium." INDEX { dot3StatsIndex } ::= { dot3StatsTable 1 } Dot3StatsEntry ::= SEQUENCE { dot3StatsIndex INTEGER, dot3StatsAlignmentErrors Counter, dot3StatsFCSErrors Counter, dot3StatsSingleCollisionFrames Counter, dot3StatsMultipleCollisionFrames Counter, dot3StatsSQETestErrors Counter, dot3StatsDeferredTransmissions Counter, dot3StatsLateCollisions Counter, dot3StatsExcessiveCollisions Counter, dot3StatsInternalMacTransmitErrors Counter, dot3StatsCarrierSenseErrors Counter, dot3StatsFrameTooLongs Counter, dot3StatsInternalMacReceiveErrors Counter, dot3StatsEtherChipSet OBJECT IDENTIFIER } dot3StatsIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An index value that uniquely identifies an interface to an ethernet-like medium. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { dot3StatsEntry 1 } dot3StatsAlignmentErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. The count represented by an instance of this object is incremented when the alignmentError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC." REFERENCE "IEEE 802.3 Layer Management" ::= { dot3StatsEntry 2 } dot3StatsFCSErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The count represented by an instance of this object is incremented when the frameCheckError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC." REFERENCE "IEEE 802.3 Layer Management" ::= { dot3StatsEntry 3 } dot3StatsSingleCollisionFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of successfully transmitted frames on a particular interface for which transmission is inhibited by exactly one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the corresponding instance of the dot3StatsMultipleCollisionFrames object." REFERENCE "IEEE 802.3 Layer Management" ::= { dot3StatsEntry 4 } dot3StatsMultipleCollisionFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the corresponding instance of the dot3StatsSingleCollisionFrames object." REFERENCE "IEEE 802.3 Layer Management" ::= { dot3StatsEntry 5 } dot3StatsSQETestErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular interface. The SQE TEST ERROR message is defined in section 7.2.2.2.4 of ANSI/IEEE 802.3-1985 and its generation is described in section 7.2.4.6 of the same document." REFERENCE "ANSI/IEEE Std 802.3-1985 Carrier Sense Multiple Access with Collision Detection Access Method and Physical Layer Specifications" ::= { dot3StatsEntry 6 } dot3StatsDeferredTransmissions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of frames for which the first transmission attempt on a particular interface is delayed because the medium is busy. The count represented by an instance of this object does not include frames involved in collisions." REFERENCE "IEEE 802.3 Layer Management" ::= { dot3StatsEntry 7 } dot3StatsLateCollisions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times that a collision is detected on a particular interface later than 512 bit-times into the transmission of a packet. Five hundred and twelve bit-times corresponds to 51.2 microseconds on a 10 Mbit/s system. A (late) collision included in a count represented by an instance of this object is also considered as a (generic) collision for purposes of other collision-related statistics." REFERENCE "IEEE 802.3 Layer Management" ::= { dot3StatsEntry 8 } dot3StatsExcessiveCollisions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of frames for which transmission on a particular interface fails due to excessive collisions." REFERENCE "IEEE 802.3 Layer Management" ::= { dot3StatsEntry 9 } dot3StatsInternalMacTransmitErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of frames for which transmission on a particular interface fails due to an internal MAC sublayer transmit error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the dot3StatsLateCollisions object, the dot3StatsExcessiveCollisions object, or the dot3StatsCarrierSenseErrors object. The precise meaning of the count represented by an instance of this object is implementation- specific. In particular, an instance of this object may represent a count of transmission errors on a particular interface that are not otherwise counted." REFERENCE "IEEE 802.3 Layer Management" ::= { dot3StatsEntry 10 } dot3StatsCarrierSenseErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular interface. The count represented by an instance of this object is incremented at most once per transmission attempt, even if the carrier sense condition fluctuates during a transmission attempt." REFERENCE "IEEE 802.3 Layer Management" ::= { dot3StatsEntry 11 } -- { dot3StatsEntry 12 } is not assigned dot3StatsFrameTooLongs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance of this object is incremented when the frameTooLong status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC." REFERENCE "IEEE 802.3 Layer Management" ::= { dot3StatsEntry 13 } -- { dot3StatsEntry 14 } is not assigned -- { dot3StatsEntry 15 } is not assigned dot3StatsInternalMacReceiveErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the dot3StatsFrameTooLongs object, the dot3StatsAlignmentErrors object, or the dot3StatsFCSErrors object. The precise meaning of the count represented by an instance of this object is implementation- specific. In particular, an instance of this object may represent a count of receive errors on a particular interface that are not otherwise counted." REFERENCE "IEEE 802.3 Layer Management" ::= { dot3StatsEntry 16 } dot3StatsEtherChipSet OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "This object contains an OBJECT IDENTIFIER which identifies the chipset used to realize the interface. Ethernet-like interfaces are typically built out of several different chips. The MIB implementor is presented with a decision of which chip to identify via this object. The implementor should identify the chip which is usually called the Medium Access Control chip. If no such chip is easily identifiable, the implementor should identify the chip which actually gathers the transmit and receive statistics and error indications. This would allow a manager station to correlate the statistics and the chip generating them, giving it the ability to take into account any known anomalies in the chip." ::= { dot3StatsEntry 17 } -- the Ethernet-like Collision Statistics group -- Implementation of this group is optional; it is appropriate -- for all systems which have the necessary metering dot3CollTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot3CollEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A collection of collision histograms for a particular set of interfaces." ::= { dot3 5 } dot3CollEntry OBJECT-TYPE SYNTAX Dot3CollEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A cell in the histogram of per-frame collisions for a particular interface. An instance of this object represents the frequency of individual MAC frames for which the transmission (successful or otherwise) on a particular interface is accompanied by a particular number of media collisions." INDEX { ifIndex, dot3CollCount } ::= { dot3CollTable 1 } Dot3CollEntry ::= SEQUENCE { dot3CollCount INTEGER, dot3CollFrequencies Counter } -- { dot3CollEntry 1 } is no longer in use dot3CollCount OBJECT-TYPE SYNTAX INTEGER (1..16) ACCESS not-accessible STATUS mandatory DESCRIPTION "The number of per-frame media collisions for which a particular collision histogram cell represents the frequency on a particular interface." ::= { dot3CollEntry 2 } dot3CollFrequencies OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of individual MAC frames for which the transmission (successful or otherwise) on a particular interface occurs after the frame has experienced exactly the number of collisions in the associated dot3CollCount object. For example, a frame which is transmitted on interface 77 after experiencing exactly 4 collisions would be indicated by incrementing only dot3CollFrequencies.77.4. No other instance of dot3CollFrequencies would be incremented in this example." ::= { dot3CollEntry 3 } -- 802.3 Tests dot3Tests OBJECT IDENTIFIER ::= { dot3 6 } dot3Errors OBJECT IDENTIFIER ::= { dot3 7 } -- TDR Test -- The Time-Domain Reflectometry (TDR) test is specific -- to ethernet-like interfaces with the exception of -- 10BaseT and 10BaseF. The TDR value may be useful -- in determining the approximate distance to a cable fault. -- It is advisable to repeat this test to check for a -- consistent resulting TDR value, to verify that there -- is a fault. dot3TestTdr OBJECT IDENTIFIER ::= { dot3Tests 1 } -- A TDR test returns as its result the time interval, -- measured in 10 MHz ticks or 100 nsec units, between -- the start of TDR test transmission and the subsequent -- detection of a collision or deassertion of carrier. On -- successful completion of a TDR test, the result is -- stored as the value of the appropriate instance of the -- MIB object dot3TestTdrValue, and the OBJECT IDENTIFIER -- of that instanceis stored in the corresponding instance -- of ifExtnsTestCode (thereby indicating where the -- result has been stored). -- Loopback Test -- Another test is the full-duplex loopback test. -- This test configures the MAC chip and executes -- an internal loopback test of memory, data paths, -- and the MAC chip logic. This loopback test can -- only be executed if the interface is offline. -- Once the test has completed, the MAC chip should -- be reinitialized for network operation, but it -- should remain offline. dot3TestLoopBack OBJECT IDENTIFIER ::= { dot3Tests 2 } -- If an error occurs during a test, the object -- ifTestResult (defined in RFC1573) will be set -- to failed(7). The following two OBJECT -- IDENTIFIERs may be used to provided more -- information as values for ifTestCode. -- couldn't initialize MAC chip for test dot3ErrorInitError OBJECT IDENTIFIER ::= { dot3Errors 1 } -- expected data not received (or not -- received correctly) in loopback test dot3ErrorLoopbackError OBJECT IDENTIFIER ::= { dot3Errors 2 } -- RFC1573 does away with the interface chipset object. -- The following OBJECT IDENTIFIER definitions are -- retained for purposes of backwards compatibility -- with pre-RFC1573 systems. -- 802.3 Hardware Chipsets -- The object ifExtnsChipSet is provided in RFC1229 to -- identify the MAC hardware used to communcate on an -- interface. The following hardware chipsets are -- provided for 802.3: dot3ChipSets OBJECT IDENTIFIER ::= { dot3 8 } dot3ChipSetAMD OBJECT IDENTIFIER ::= { dot3ChipSets 1 } dot3ChipSetAMD7990 OBJECT IDENTIFIER ::= { dot3ChipSetAMD 1 } dot3ChipSetAMD79900 OBJECT IDENTIFIER ::= { dot3ChipSetAMD 2 } dot3ChipSetAMD79C940 OBJECT IDENTIFIER ::= { dot3ChipSetAMD 3 } dot3ChipSetIntel OBJECT IDENTIFIER ::= { dot3ChipSets 2 } dot3ChipSetIntel82586 OBJECT IDENTIFIER ::= { dot3ChipSetIntel 1 } dot3ChipSetIntel82596 OBJECT IDENTIFIER ::= { dot3ChipSetIntel 2 } dot3ChipSetSeeq OBJECT IDENTIFIER ::= { dot3ChipSets 3 } dot3ChipSetSeeq8003 OBJECT IDENTIFIER ::= { dot3ChipSetSeeq 1 } dot3ChipSetNational OBJECT IDENTIFIER ::= { dot3ChipSets 4 } dot3ChipSetNational8390 OBJECT IDENTIFIER ::= { dot3ChipSetNational 1 } dot3ChipSetNationalSonic OBJECT IDENTIFIER ::= { dot3ChipSetNational 2 } dot3ChipSetFujitsu OBJECT IDENTIFIER ::= { dot3ChipSets 5 } dot3ChipSetFujitsu86950 OBJECT IDENTIFIER ::= { dot3ChipSetFujitsu 1 } dot3ChipSetDigital OBJECT IDENTIFIER ::= { dot3ChipSets 6 } dot3ChipSetDigitalDC21040 OBJECT IDENTIFIER ::= { dot3ChipSetDigital 1 } -- For those chipsets not represented above, OBJECT IDENTIFIER -- assignment is required in other documentation, e.g., assignment -- within that part of the registration tree delegated to -- individual enterprises (see RFC1155). END OSPF-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, Counter32, Gauge32, Integer32 FROM SNMPv2-SMI OBJECT-TYPE FROM RFC1212 IpAddress FROM RFC1155-SMI DisplayString FROM RFC1213-MIB TruthValue, RowStatus FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF mib-2 FROM RFC1213-MIB; -- This MIB module uses the extended OBJECT-TYPE macro as -- defined in [9]. ospf MODULE-IDENTITY LAST-UPDATED "9501201225Z" -- Fri Jan 20 12:25:50 PST 1995 ORGANIZATION "IETF OSPF Working Group" CONTACT-INFO " Fred Baker Postal: Cisco Systems 519 Lado Drive Santa Barbara, California 93111 Tel: +1 805 681 0115 E-Mail: fred@cisco.com Rob Coltun Postal: RainbowBridge Communications Tel: (301) 340-9416 E-Mail: rcoltun@rainbow-bridge.com" DESCRIPTION "The MIB module to describe the OSPF Version 2 Protocol" ::= { mib-2 14 } -- The Area ID, in OSPF, has the same format as an IP Address, -- but has the function of defining a summarization point for -- Link State Advertisements AreaID ::= IpAddress -- The Router ID, in OSPF, has the same format as an IP Address, -- but identifies the router independent of its IP Address. RouterID ::= IpAddress -- The OSPF Metric is defined as an unsigned value in the range Metric ::= Integer32 (0..'FFFF'h) BigMetric ::= Integer32 (0..'FFFFFF'h) -- Status Values -- The status of an interface: 'enabled' indicates that -- it is willing to communicate with other OSPF Routers, -- while 'disabled' indicates that it is not." Status ::= INTEGER { enabled (1), disabled (2) } -- Time Durations measured in seconds -- "A positive integer. Values in excess are precluded as -- unnecessary and prone to interoperability issues." PositiveInteger ::= Integer32 (0..'7FFFFFFF'h) -- "The range of intervals on which hello messages are exchanged." HelloRange ::= Integer32 (1..'FFFF'h) -- "The values that one might find or configure for -- variables bounded by the maximum age of an LSA." UpToMaxAge ::= Integer32 (0..3600) -- The range of ifIndex InterfaceIndex ::= Integer32 -- Potential Priorities for the Designated Router Election -- "The values defined for the priority of a system for -- becoming the designated router." DesignatedRouterPriority ::= Integer32 (0..'FF'h) -- "Type of Service is defined as a mapping to the IP Type of -- Service Flags as defined in the IP Forwarding Table MIB -- +-----+-----+-----+-----+-----+-----+-----+-----+ -- | | | | -- | PRECEDENCE | TYPE OF SERVICE | 0 | -- | | | | -- +-----+-----+-----+-----+-----+-----+-----+-----+ -- IP TOS IP TOS -- Field Policy Field Policy -- Contents Code Contents Code -- 0 0 0 0 ==> 0 0 0 0 1 ==> 2 -- 0 0 1 0 ==> 4 0 0 1 1 ==> 6 -- 0 1 0 0 ==> 8 0 1 0 1 ==> 10 -- 0 1 1 0 ==> 12 0 1 1 1 ==> 14 -- 1 0 0 0 ==> 16 1 0 0 1 ==> 18 -- 1 0 1 0 ==> 20 1 0 1 1 ==> 22 -- 1 1 0 0 ==> 24 1 1 0 1 ==> 26 -- 1 1 1 0 ==> 28 1 1 1 1 ==> 30 -- The remaining values are left for future definition." TOSType ::= Integer32 (0..30) -- OSPF General Variables -- These parameters apply globally to the Router's -- OSPF Process. ospfGeneralGroup OBJECT IDENTIFIER ::= { ospf 1 } ospfRouterId OBJECT-TYPE SYNTAX RouterID ACCESS read-write STATUS mandatory DESCRIPTION "A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the router's IP interface addresses." REFERENCE "OSPF Version 2, C.1 Global parameters" ::= { ospfGeneralGroup 1 } ospfAdminStat OBJECT-TYPE SYNTAX Status ACCESS read-write STATUS mandatory DESCRIPTION "The administrative status of OSPF in the router. The value 'enabled' denotes that the OSPF Process is active on at least one inter- face; 'disabled' disables it on all inter- faces." ::= { ospfGeneralGroup 2 } ospfVersionNumber OBJECT-TYPE SYNTAX INTEGER { version2 (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The mandatory version number of the OSPF proto- col is 2." REFERENCE "OSPF Version 2, Title" ::= { ospfGeneralGroup 3 } ospfAreaBdrRtrStatus OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "A flag to note whether this router is an area border router." REFERENCE "OSPF Version 2, Section 3 Splitting the AS into Areas" ::= { ospfGeneralGroup 4 } ospfASBdrRtrStatus OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "A flag to note whether this router is config- ured as an Autonomous System border router." REFERENCE "OSPF Version 2, Section 3.3 Classification of routers" ::= { ospfGeneralGroup 5 } ospfExternLsaCount OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of external (LS type 5) link-state advertisements in the link-state database." REFERENCE "OSPF Version 2, Appendix A.4.5 AS external link advertisements" ::= { ospfGeneralGroup 6 } ospfExternLsaCksumSum OBJECT-TYPE SYNTAX Integer32 ACCESS read-only STATUS mandatory DESCRIPTION "The 32-bit unsigned sum of the LS checksums of the external link-state advertisements con- tained in the link-state database. This sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers." ::= { ospfGeneralGroup 7 } ospfTOSSupport OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "The router's support for type-of-service rout- ing." REFERENCE "OSPF Version 2, Appendix F.1.2 Optional TOS support" ::= { ospfGeneralGroup 8 } ospfOriginateNewLsas OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of new link-state advertisements that have been originated. This number is in- cremented each time the router originates a new LSA." ::= { ospfGeneralGroup 9 } ospfRxNewLsas OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of link-state advertisements re- ceived determined to be new instantiations. This number does not include newer instantia- tions of self-originated link-state advertise- ments." ::= { ospfGeneralGroup 10 } ospfExtLsdbLimit OBJECT-TYPE SYNTAX Integer32 (-1..'7FFFFFFF'h) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of non-default AS- external-LSAs entries that can be stored in the link-state database. If the value is -1, then there is no limit. When the number of non-default AS-external-LSAs in a router's link-state database reaches ospfExtLsdbLimit, the router enters Overflow- State. The router never holds more than ospfExtLsdbLimit non-default AS-external-LSAs in its database. OspfExtLsdbLimit MUST be set identically in all routers attached to the OSPF backbone and/or any regular OSPF area. (i.e., OSPF stub areas and NSSAs are excluded)." DEFVAL { -1 } ::= { ospfGeneralGroup 11 } ospfMulticastExtensions OBJECT-TYPE SYNTAX Integer32 ACCESS read-write STATUS mandatory DESCRIPTION "A Bit Mask indicating whether the router is forwarding IP multicast (Class D) datagrams based on the algorithms defined in the Multi- cast Extensions to OSPF. Bit 0, if set, indicates that the router can forward IP multicast datagrams in the router's directly attached areas (called intra-area mul- ticast routing). Bit 1, if set, indicates that the router can forward IP multicast datagrams between OSPF areas (called inter-area multicast routing). Bit 2, if set, indicates that the router can forward IP multicast datagrams between Auto- nomous Systems (called inter-AS multicast rout- ing). Only certain combinations of bit settings are allowed, namely: 0 (no multicast forwarding is enabled), 1 (intra-area multicasting only), 3 (intra-area and inter-area multicasting), 5 (intra-area and inter-AS multicasting) and 7 (multicasting everywhere). By default, no mul- ticast forwarding is enabled." DEFVAL { 0 } ::= { ospfGeneralGroup 12 } ospfExitOverflowInterval OBJECT-TYPE SYNTAX PositiveInteger ACCESS read-write STATUS mandatory DESCRIPTION "The number of seconds that, after entering OverflowState, a router will attempt to leave OverflowState. This allows the router to again originate non-default AS-external-LSAs. When set to 0, the router will not leave Overflow- State until restarted." DEFVAL { 0 } ::= { ospfGeneralGroup 13 } ospfDemandExtensions OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "The router's support for demand routing." REFERENCE "OSPF Version 2, Appendix on Demand Routing" ::= { ospfGeneralGroup 14 } -- The OSPF Area Data Structure contains information -- regarding the various areas. The interfaces and -- virtual links are configured as part of these areas. -- Area 0.0.0.0, by definition, is the Backbone Area ospfAreaTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfAreaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information describing the configured parame- ters and cumulative statistics of the router's attached areas." REFERENCE "OSPF Version 2, Section 6 The Area Data Struc- ture" ::= { ospf 2 } ospfAreaEntry OBJECT-TYPE SYNTAX OspfAreaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information describing the configured parame- ters and cumulative statistics of one of the router's attached areas." INDEX { ospfAreaId } ::= { ospfAreaTable 1 } OspfAreaEntry ::= SEQUENCE { ospfAreaId AreaID, ospfAuthType Integer32, ospfImportAsExtern INTEGER, ospfSpfRuns Counter32, ospfAreaBdrRtrCount Gauge32, ospfAsBdrRtrCount Gauge32, ospfAreaLsaCount Gauge32, ospfAreaLsaCksumSum Integer32, ospfAreaSummary INTEGER, ospfAreaStatus RowStatus } ospfAreaId OBJECT-TYPE SYNTAX AreaID ACCESS read-only STATUS mandatory DESCRIPTION "A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone." REFERENCE "OSPF Version 2, Appendix C.2 Area parameters" ::= { ospfAreaEntry 1 } ospfAuthType OBJECT-TYPE SYNTAX Integer32 -- none (0), -- simplePassword (1) -- md5 (2) -- reserved for specification by IANA (> 2) ACCESS read-write STATUS obsolete DESCRIPTION "The authentication type specified for an area. Additional authentication types may be assigned locally on a per Area basis." REFERENCE "OSPF Version 2, Appendix E Authentication" DEFVAL { 0 } -- no authentication, by default ::= { ospfAreaEntry 2 } ospfImportAsExtern OBJECT-TYPE SYNTAX INTEGER { importExternal (1), importNoExternal (2), importNssa (3) } ACCESS read-write STATUS mandatory DESCRIPTION "The area's support for importing AS external link- state advertisements." REFERENCE "OSPF Version 2, Appendix C.2 Area parameters" DEFVAL { importExternal } ::= { ospfAreaEntry 3 } ospfSpfRuns OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of times that the intra-area route table has been calculated using this area's link-state database. This is typically done using Dijkstra's algorithm." ::= { ospfAreaEntry 4 } ospfAreaBdrRtrCount OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The total number of area border routers reach- able within this area. This is initially zero, and is calculated in each SPF Pass." ::= { ospfAreaEntry 5 } ospfAsBdrRtrCount OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass." ::= { ospfAreaEntry 6 } ospfAreaLsaCount OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The total number of link-state advertisements in this area's link-state database, excluding AS External LSA's." ::= { ospfAreaEntry 7 } ospfAreaLsaCksumSum OBJECT-TYPE SYNTAX Integer32 ACCESS read-only STATUS mandatory DESCRIPTION "The 32-bit unsigned sum of the link-state ad- vertisements' LS checksums contained in this area's link-state database. This sum excludes external (LS type 5) link-state advertisements. The sum can be used to determine if there has been a change in a router's link state data- base, and to compare the link-state database of two routers." DEFVAL { 0 } ::= { ospfAreaEntry 8 } ospfAreaSummary OBJECT-TYPE SYNTAX INTEGER { noAreaSummary (1), sendAreaSummary (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The variable ospfAreaSummary controls the im- port of summary LSAs into stub areas. It has no effect on other areas. If it is noAreaSummary, the router will neither originate nor propagate summary LSAs into the stub area. It will rely entirely on its de- fault route. If it is sendAreaSummary, the router will both summarize and propagate summary LSAs." DEFVAL { noAreaSummary } ::= { ospfAreaEntry 9 } ospfAreaStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent." ::= { ospfAreaEntry 10 } -- OSPF Area Default Metric Table -- The OSPF Area Default Metric Table describes the metrics -- that a default Area Border Router will advertise into a -- Stub area. ospfStubAreaTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfStubAreaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The set of metrics that will be advertised by a default Area Border Router into a stub area." REFERENCE "OSPF Version 2, Appendix C.2, Area Parameters" ::= { ospf 3 } ospfStubAreaEntry OBJECT-TYPE SYNTAX OspfStubAreaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The metric for a given Type of Service that will be advertised by a default Area Border Router into a stub area." REFERENCE "OSPF Version 2, Appendix C.2, Area Parameters" INDEX { ospfStubAreaId, ospfStubTOS } ::= { ospfStubAreaTable 1 } OspfStubAreaEntry ::= SEQUENCE { ospfStubAreaId AreaID, ospfStubTOS TOSType, ospfStubMetric BigMetric, ospfStubStatus RowStatus, ospfStubMetricType INTEGER } ospfStubAreaId OBJECT-TYPE SYNTAX AreaID ACCESS read-only STATUS mandatory DESCRIPTION "The 32 bit identifier for the Stub Area. On creation, this can be derived from the in- stance." ::= { ospfStubAreaEntry 1 } ospfStubTOS OBJECT-TYPE SYNTAX TOSType ACCESS read-only STATUS mandatory DESCRIPTION "The Type of Service associated with the metric. On creation, this can be derived from the instance." ::= { ospfStubAreaEntry 2 } ospfStubMetric OBJECT-TYPE SYNTAX BigMetric ACCESS read-write STATUS mandatory DESCRIPTION "The metric value applied at the indicated type of service. By default, this equals the least metric at the type of service among the inter- faces to other areas." ::= { ospfStubAreaEntry 3 } ospfStubStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent." ::= { ospfStubAreaEntry 4 } ospfStubMetricType OBJECT-TYPE SYNTAX INTEGER { ospfMetric (1), -- OSPF Metric comparableCost (2), -- external type 1 nonComparable (3) -- external type 2 } ACCESS read-write STATUS mandatory DESCRIPTION "This variable displays the type of metric ad- vertised as a default route." DEFVAL { ospfMetric } ::= { ospfStubAreaEntry 5 } -- OSPF Link State Database -- The Link State Database contains the Link State -- Advertisements from throughout the areas that the -- device is attached to. ospfLsdbTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfLsdbEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The OSPF Process's Link State Database." REFERENCE "OSPF Version 2, Section 12 Link State Adver- tisements" ::= { ospf 4 } ospfLsdbEntry OBJECT-TYPE SYNTAX OspfLsdbEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single Link State Advertisement." INDEX { ospfLsdbAreaId, ospfLsdbType, ospfLsdbLsid, ospfLsdbRouterId } ::= { ospfLsdbTable 1 } OspfLsdbEntry ::= SEQUENCE { ospfLsdbAreaId AreaID, ospfLsdbType INTEGER, ospfLsdbLsid IpAddress, ospfLsdbRouterId RouterID, ospfLsdbSequence Integer32, ospfLsdbAge Integer32, ospfLsdbChecksum Integer32, ospfLsdbAdvertisement OCTET STRING } ospfLsdbAreaId OBJECT-TYPE SYNTAX AreaID ACCESS read-only STATUS mandatory DESCRIPTION "The 32 bit identifier of the Area from which the LSA was received." REFERENCE "OSPF Version 2, Appendix C.2 Area parameters" ::= { ospfLsdbEntry 1 } -- External Link State Advertisements are permitted -- for backward compatibility, but should be displayed in -- the ospfExtLsdbTable rather than here. ospfLsdbType OBJECT-TYPE SYNTAX INTEGER { routerLink (1), networkLink (2), summaryLink (3), asSummaryLink (4), asExternalLink (5), -- but see ospfExtLsdbTable multicastLink (6), nssaExternalLink (7) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of the link state advertisement. Each link state type has a separate advertise- ment format." REFERENCE "OSPF Version 2, Appendix A.4.1 The Link State Advertisement header" ::= { ospfLsdbEntry 2 } ospfLsdbLsid OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement." REFERENCE "OSPF Version 2, Section 12.1.4 Link State ID" ::= { ospfLsdbEntry 3 } ospfLsdbRouterId OBJECT-TYPE SYNTAX RouterID ACCESS read-only STATUS mandatory DESCRIPTION "The 32 bit number that uniquely identifies the originating router in the Autonomous System." REFERENCE "OSPF Version 2, Appendix C.1 Global parameters" ::= { ospfLsdbEntry 4 } -- Note that the OSPF Sequence Number is a 32 bit signed -- integer. It starts with the value '80000001'h, -- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h -- Thus, a typical sequence number will be very negative. ospfLsdbSequence OBJECT-TYPE SYNTAX Integer32 ACCESS read-only STATUS mandatory DESCRIPTION "The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement." REFERENCE "OSPF Version 2, Section 12.1.6 LS sequence number" ::= { ospfLsdbEntry 5 } ospfLsdbAge OBJECT-TYPE SYNTAX Integer32 -- Should be 0..MaxAge ACCESS read-only STATUS mandatory DESCRIPTION "This field is the age of the link state adver- tisement in seconds." REFERENCE "OSPF Version 2, Section 12.1.1 LS age" ::= { ospfLsdbEntry 6 } ospfLsdbChecksum OBJECT-TYPE SYNTAX Integer32 ACCESS read-only STATUS mandatory DESCRIPTION "This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum." REFERENCE "OSPF Version 2, Section 12.1.7 LS checksum" ::= { ospfLsdbEntry 7 } ospfLsdbAdvertisement OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..65535)) ACCESS read-only STATUS mandatory DESCRIPTION "The entire Link State Advertisement, including its header." REFERENCE "OSPF Version 2, Section 12 Link State Adver- tisements" ::= { ospfLsdbEntry 8 } -- Address Range Table -- The Address Range Table acts as an adjunct to the Area -- Table; It describes those Address Range Summaries that -- are configured to be propagated from an Area to reduce -- the amount of information about it which is known beyond -- its borders. ospfAreaRangeTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfAreaRangeEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "A range if IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255" REFERENCE "OSPF Version 2, Appendix C.2 Area parameters" ::= { ospf 5 } ospfAreaRangeEntry OBJECT-TYPE SYNTAX OspfAreaRangeEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "A range if IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255" REFERENCE "OSPF Version 2, Appendix C.2 Area parameters" INDEX { ospfAreaRangeAreaId, ospfAreaRangeNet } ::= { ospfAreaRangeTable 1 } OspfAreaRangeEntry ::= SEQUENCE { ospfAreaRangeAreaId AreaID, ospfAreaRangeNet IpAddress, ospfAreaRangeMask IpAddress, ospfAreaRangeStatus RowStatus, ospfAreaRangeEffect INTEGER } ospfAreaRangeAreaId OBJECT-TYPE SYNTAX AreaID ACCESS read-only STATUS obsolete DESCRIPTION "The Area the Address Range is to be found within." REFERENCE "OSPF Version 2, Appendix C.2 Area parameters" ::= { ospfAreaRangeEntry 1 } ospfAreaRangeNet OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS obsolete DESCRIPTION "The IP Address of the Net or Subnet indicated by the range." REFERENCE "OSPF Version 2, Appendix C.2 Area parameters" ::= { ospfAreaRangeEntry 2 } ospfAreaRangeMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS obsolete DESCRIPTION "The Subnet Mask that pertains to the Net or Subnet." REFERENCE "OSPF Version 2, Appendix C.2 Area parameters" ::= { ospfAreaRangeEntry 3 } ospfAreaRangeStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS obsolete DESCRIPTION "This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent." ::= { ospfAreaRangeEntry 4 } ospfAreaRangeEffect OBJECT-TYPE SYNTAX INTEGER { advertiseMatching (1), doNotAdvertiseMatching (2) } ACCESS read-write STATUS obsolete DESCRIPTION "Subnets subsumed by ranges either trigger the advertisement of the indicated summary (adver- tiseMatching), or result in the subnet's not being advertised at all outside the area." DEFVAL { advertiseMatching } ::= { ospfAreaRangeEntry 5 } -- OSPF Host Table -- The Host/Metric Table indicates what hosts are directly -- attached to the Router, and what metrics and types of -- service should be advertised for them. ospfHostTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfHostEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The list of Hosts, and their metrics, that the router will advertise as host routes." REFERENCE "OSPF Version 2, Appendix C.6 Host route param- eters" ::= { ospf 6 } ospfHostEntry OBJECT-TYPE SYNTAX OspfHostEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A metric to be advertised, for a given type of service, when a given host is reachable." INDEX { ospfHostIpAddress, ospfHostTOS } ::= { ospfHostTable 1 } OspfHostEntry ::= SEQUENCE { ospfHostIpAddress IpAddress, ospfHostTOS TOSType, ospfHostMetric Metric, ospfHostStatus RowStatus, ospfHostAreaID AreaID } ospfHostIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP Address of the Host." REFERENCE "OSPF Version 2, Appendix C.6 Host route parame- ters" ::= { ospfHostEntry 1 } ospfHostTOS OBJECT-TYPE SYNTAX TOSType ACCESS read-only STATUS mandatory DESCRIPTION "The Type of Service of the route being config- ured." REFERENCE "OSPF Version 2, Appendix C.6 Host route parame- ters" ::= { ospfHostEntry 2 } ospfHostMetric OBJECT-TYPE SYNTAX Metric ACCESS read-write STATUS mandatory DESCRIPTION "The Metric to be advertised." REFERENCE "OSPF Version 2, Appendix C.6 Host route parame- ters" ::= { ospfHostEntry 3 } ospfHostStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent." ::= { ospfHostEntry 4 } ospfHostAreaID OBJECT-TYPE SYNTAX AreaID ACCESS read-only STATUS mandatory DESCRIPTION "The Area the Host Entry is to be found within. By default, the area that a subsuming OSPF in- terface is in, or 0.0.0.0" REFERENCE "OSPF Version 2, Appendix C.2 Area parameters" ::= { ospfHostEntry 5 } -- OSPF Interface Table -- The OSPF Interface Table augments the ipAddrTable -- with OSPF specific information. ospfIfTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF." REFERENCE "OSPF Version 2, Appendix C.3 Router interface parameters" ::= { ospf 7 } ospfIfEntry OBJECT-TYPE SYNTAX OspfIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The OSPF Interface Entry describes one inter- face from the viewpoint of OSPF." INDEX { ospfIfIpAddress, ospfAddressLessIf } ::= { ospfIfTable 1 } OspfIfEntry ::= SEQUENCE { ospfIfIpAddress IpAddress, ospfAddressLessIf Integer32, ospfIfAreaId AreaID, ospfIfType INTEGER, ospfIfAdminStat Status, ospfIfRtrPriority DesignatedRouterPriority, ospfIfTransitDelay UpToMaxAge, ospfIfRetransInterval UpToMaxAge, ospfIfHelloInterval HelloRange, ospfIfRtrDeadInterval PositiveInteger, ospfIfPollInterval PositiveInteger, ospfIfState INTEGER, ospfIfDesignatedRouter IpAddress, ospfIfBackupDesignatedRouter IpAddress, ospfIfEvents Counter32, ospfIfAuthType INTEGER, ospfIfAuthKey DisplayString, ospfIfStatus RowStatus, ospfIfMulticastForwarding INTEGER, ospfIfDemand TruthValue } ospfIfIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP address of this OSPF interface." ::= { ospfIfEntry 1 } ospfAddressLessIf OBJECT-TYPE SYNTAX Integer32 ACCESS read-only STATUS mandatory DESCRIPTION "For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces having no IP Address." ::= { ospfIfEntry 2 } ospfIfAreaId OBJECT-TYPE SYNTAX AreaID ACCESS read-write STATUS mandatory DESCRIPTION "A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone." DEFVAL { '00000000'H } -- 0.0.0.0 ::= { ospfIfEntry 3 } ospfIfType OBJECT-TYPE SYNTAX INTEGER { broadcast (1), nbma (2), pointToPoint (3), pointToMultipoint (5) } ACCESS read-write STATUS mandatory DESCRIPTION "The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broad- cast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25 and similar technologies take the value 'nbma', and links that are definitively point to point take the value 'pointToPoint'." ::= { ospfIfEntry 4 } ospfIfAdminStat OBJECT-TYPE SYNTAX Status ACCESS read-write STATUS mandatory DESCRIPTION "The OSPF interface's administrative status. The value formed on the interface, and the in- terface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPF." DEFVAL { enabled } ::= { ospfIfEntry 5 } ospfIfRtrPriority OBJECT-TYPE SYNTAX DesignatedRouterPriority ACCESS read-write STATUS mandatory DESCRIPTION "The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligi- ble to become the designated router on this particular network. In the event of a tie in this value, routers will use their Router ID as a tie breaker." DEFVAL { 1 } ::= { ospfIfEntry 6 } ospfIfTransitDelay OBJECT-TYPE SYNTAX UpToMaxAge ACCESS read-write STATUS mandatory DESCRIPTION "The estimated number of seconds it takes to transmit a link state update packet over this interface." DEFVAL { 1 } ::= { ospfIfEntry 7 } ospfIfRetransInterval OBJECT-TYPE SYNTAX UpToMaxAge ACCESS read-write STATUS mandatory DESCRIPTION "The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state request packets." DEFVAL { 5 } ::= { ospfIfEntry 8 } ospfIfHelloInterval OBJECT-TYPE SYNTAX HelloRange ACCESS read-write STATUS mandatory DESCRIPTION "The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a common network." DEFVAL { 10 } ::= { ospfIfEntry 9 } ospfIfRtrDeadInterval OBJECT-TYPE SYNTAX PositiveInteger ACCESS read-write STATUS mandatory DESCRIPTION "The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network." DEFVAL { 40 } ::= { ospfIfEntry 10 } ospfIfPollInterval OBJECT-TYPE SYNTAX PositiveInteger ACCESS read-write STATUS mandatory DESCRIPTION "The larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor." DEFVAL { 120 } ::= { ospfIfEntry 11 } ospfIfState OBJECT-TYPE SYNTAX INTEGER { down (1), loopback (2), waiting (3), pointToPoint (4), designatedRouter (5), backupDesignatedRouter (6), otherDesignatedRouter (7) } ACCESS read-only STATUS mandatory DESCRIPTION "The OSPF Interface State." DEFVAL { down } ::= { ospfIfEntry 12 } ospfIfDesignatedRouter OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP Address of the Designated Router." DEFVAL { '00000000'H } -- 0.0.0.0 ::= { ospfIfEntry 13 } ospfIfBackupDesignatedRouter OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP Address of the Backup Designated Router." DEFVAL { '00000000'H } -- 0.0.0.0 ::= { ospfIfEntry 14 } ospfIfEvents OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of times this OSPF interface has changed its state, or an error has occurred." ::= { ospfIfEntry 15 } ospfIfAuthKey OBJECT-TYPE SYNTAX DisplayString (SIZE(0..256)) ACCESS read-write STATUS mandatory DESCRIPTION "The Authentication Key. If the Area's Author- ization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. Note that unauthenticated interfaces need no authentication key, and simple password authen- tication cannot use a key of more than 8 oc- tets. Larger keys are useful only with authen- tication mechanisms not specified in this docu- ment. When read, ospfIfAuthKey always returns an Oc- tet String of length zero." REFERENCE "OSPF Version 2, Section 9 The Interface Data Structure" DEFVAL { '0000000000000000'H } -- 0.0.0.0.0.0.0.0 ::= { ospfIfEntry 16 } ospfIfStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent." ::= { ospfIfEntry 17 } ospfIfMulticastForwarding OBJECT-TYPE SYNTAX INTEGER { blocked (1), -- no multicast forwarding multicast (2), -- using multicast address unicast (3) -- to each OSPF neighbor } ACCESS read-write STATUS mandatory DESCRIPTION "The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link uni- casts. Data link multicasting is not meaning- ful on point to point and NBMA interfaces, and setting ospfMulticastForwarding to 0 effective- ly disables all multicast forwarding." DEFVAL { blocked } ::= { ospfIfEntry 18 } ospfIfDemand OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether Demand OSPF procedures (hel- lo supression to FULL neighbors and setting the DoNotAge flag on proogated LSAs) should be per- formed on this interface." DEFVAL { false } ::= { ospfIfEntry 19 } ospfIfAuthType OBJECT-TYPE SYNTAX INTEGER (0..255) -- none (0), -- simplePassword (1) -- md5 (2) -- reserved for specification by IANA (> 2) ACCESS read-write STATUS mandatory DESCRIPTION "The authentication type specified for an in- terface. Additional authentication types may be assigned locally." REFERENCE "OSPF Version 2, Appendix E Authentication" DEFVAL { 0 } -- no authentication, by default ::= { ospfIfEntry 20 } -- OSPF Interface Metric Table -- The Metric Table describes the metrics to be advertised -- for a specified interface at the various types of service. -- As such, this table is an adjunct of the OSPF Interface -- Table. -- Types of service, as defined by RFC 791, have the ability -- to request low delay, high bandwidth, or reliable linkage. -- For the purposes of this specification, the measure of -- bandwidth -- Metric = 10^8 / ifSpeed -- is the default value. For multiple link interfaces, note -- that ifSpeed is the sum of the individual link speeds. -- This yields a number having the following typical values: -- Network Type/bit rate Metric -- >= 100 MBPS 1 -- Ethernet/802.3 10 -- E1 48 -- T1 (ESF) 65 -- 64 KBPS 1562 -- 56 KBPS 1785 -- 19.2 KBPS 5208 -- 9.6 KBPS 10416 -- Routes that are not specified use the default (TOS 0) metric ospfIfMetricTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfIfMetricEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The TOS metrics for a non-virtual interface identified by the interface index." REFERENCE "OSPF Version 2, Appendix C.3 Router interface parameters" ::= { ospf 8 } ospfIfMetricEntry OBJECT-TYPE SYNTAX OspfIfMetricEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A particular TOS metric for a non-virtual in- terface identified by the interface index." REFERENCE "OSPF Version 2, Appendix C.3 Router interface parameters" INDEX { ospfIfMetricIpAddress, ospfIfMetricAddressLessIf, ospfIfMetricTOS } ::= { ospfIfMetricTable 1 } OspfIfMetricEntry ::= SEQUENCE { ospfIfMetricIpAddress IpAddress, ospfIfMetricAddressLessIf Integer32, ospfIfMetricTOS TOSType, ospfIfMetricValue Metric, ospfIfMetricStatus RowStatus } ospfIfMetricIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP address of this OSPF interface. On row creation, this can be derived from the in- stance." ::= { ospfIfMetricEntry 1 } ospfIfMetricAddressLessIf OBJECT-TYPE SYNTAX Integer32 ACCESS read-only STATUS mandatory DESCRIPTION "For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the value of ifIndex for in- terfaces having no IP Address. On row crea- tion, this can be derived from the instance." ::= { ospfIfMetricEntry 2 } ospfIfMetricTOS OBJECT-TYPE SYNTAX TOSType ACCESS read-only STATUS mandatory DESCRIPTION "The type of service metric being referenced. On row creation, this can be derived from the instance." ::= { ospfIfMetricEntry 3 } ospfIfMetricValue OBJECT-TYPE SYNTAX Metric ACCESS read-write STATUS mandatory DESCRIPTION "The metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed." ::= { ospfIfMetricEntry 4 } ospfIfMetricStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent." ::= { ospfIfMetricEntry 5 } -- OSPF Virtual Interface Table -- The Virtual Interface Table describes the virtual -- links that the OSPF Process is configured to -- carry on. ospfVirtIfTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfVirtIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about this router's virtual inter- faces." REFERENCE "OSPF Version 2, Appendix C.4 Virtual link parameters" ::= { ospf 9 } ospfVirtIfEntry OBJECT-TYPE SYNTAX OspfVirtIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a single Virtual Interface." INDEX { ospfVirtIfAreaId, ospfVirtIfNeighbor } ::= { ospfVirtIfTable 1 } OspfVirtIfEntry ::= SEQUENCE { ospfVirtIfAreaId AreaID, ospfVirtIfNeighbor RouterID, ospfVirtIfTransitDelay UpToMaxAge, ospfVirtIfRetransInterval UpToMaxAge, ospfVirtIfHelloInterval HelloRange, ospfVirtIfRtrDeadInterval PositiveInteger, ospfVirtIfState INTEGER, ospfVirtIfEvents Counter32, ospfVirtIfAuthType INTEGER, ospfVirtIfAuthKey DisplayString, ospfVirtIfStatus RowStatus } ospfVirtIfAreaId OBJECT-TYPE SYNTAX AreaID ACCESS read-only STATUS mandatory DESCRIPTION "The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0" ::= { ospfVirtIfEntry 1 } ospfVirtIfNeighbor OBJECT-TYPE SYNTAX RouterID ACCESS read-only STATUS mandatory DESCRIPTION "The Router ID of the Virtual Neighbor." ::= { ospfVirtIfEntry 2 } ospfVirtIfTransitDelay OBJECT-TYPE SYNTAX UpToMaxAge ACCESS read-write STATUS mandatory DESCRIPTION "The estimated number of seconds it takes to transmit a link- state update packet over this interface." DEFVAL { 1 } ::= { ospfVirtIfEntry 3 } ospfVirtIfRetransInterval OBJECT-TYPE SYNTAX UpToMaxAge ACCESS read-write STATUS mandatory DESCRIPTION "The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state request packets. This value should be well over the expected round- trip time." DEFVAL { 5 } ::= { ospfVirtIfEntry 4 } ospfVirtIfHelloInterval OBJECT-TYPE SYNTAX HelloRange ACCESS read-write STATUS mandatory DESCRIPTION "The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for the virtual neighbor." DEFVAL { 10 } ::= { ospfVirtIfEntry 5 } ospfVirtIfRtrDeadInterval OBJECT-TYPE SYNTAX PositiveInteger ACCESS read-write STATUS mandatory DESCRIPTION "The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neigh- bor." DEFVAL { 60 } ::= { ospfVirtIfEntry 6 } ospfVirtIfState OBJECT-TYPE SYNTAX INTEGER { down (1), -- these use the same encoding pointToPoint (4) -- as the ospfIfTable } ACCESS read-only STATUS mandatory DESCRIPTION "OSPF virtual interface states." DEFVAL { down } ::= { ospfVirtIfEntry 7 } ospfVirtIfEvents OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of state changes or error events on this Virtual Link" ::= { ospfVirtIfEntry 8 } ospfVirtIfAuthKey OBJECT-TYPE SYNTAX DisplayString (SIZE(0..256)) ACCESS read-write STATUS mandatory DESCRIPTION "If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 oc- tets. Note that unauthenticated interfaces need no authentication key, and simple password authen- tication cannot use a key of more than 8 oc- tets. Larger keys are useful only with authen- tication mechanisms not specified in this docu- ment. When read, ospfVifAuthKey always returns a string of length zero." REFERENCE "OSPF Version 2, Section 9 The Interface Data Structure" DEFVAL { '0000000000000000'H } -- 0.0.0.0.0.0.0.0 ::= { ospfVirtIfEntry 9 } ospfVirtIfStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent." ::= { ospfVirtIfEntry 10 } ospfVirtIfAuthType OBJECT-TYPE SYNTAX INTEGER (0..255) -- none (0), -- simplePassword (1) -- md5 (2) -- reserved for specification by IANA (> 2) ACCESS read-write STATUS mandatory DESCRIPTION "The authentication type specified for a virtu- al interface. Additional authentication types may be assigned locally." REFERENCE "OSPF Version 2, Appendix E Authentication" DEFVAL { 0 } -- no authentication, by default ::= { ospfVirtIfEntry 11 } -- OSPF Neighbor Table -- The OSPF Neighbor Table describes all neighbors in -- the locality of the subject router. ospfNbrTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfNbrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of non-virtual neighbor information." REFERENCE "OSPF Version 2, Section 10 The Neighbor Data Structure" ::= { ospf 10 } ospfNbrEntry OBJECT-TYPE SYNTAX OspfNbrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The information regarding a single neighbor." REFERENCE "OSPF Version 2, Section 10 The Neighbor Data Structure" INDEX { ospfNbrIpAddr, ospfNbrAddressLessIndex } ::= { ospfNbrTable 1 } OspfNbrEntry ::= SEQUENCE { ospfNbrIpAddr IpAddress, ospfNbrAddressLessIndex InterfaceIndex, ospfNbrRtrId RouterID, ospfNbrOptions Integer32, ospfNbrPriority DesignatedRouterPriority, ospfNbrState INTEGER, ospfNbrEvents Counter32, ospfNbrLsRetransQLen Gauge32, ospfNbmaNbrStatus RowStatus, ospfNbmaNbrPermanence INTEGER, ospfNbrHelloSuppressed TruthValue } ospfNbrIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP address this neighbor is using in its IP Source Address. Note that, on addressless links, this will not be 0.0.0.0, but the ad- dress of another of the neighbor's interfaces." ::= { ospfNbrEntry 1 } ospfNbrAddressLessIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "On an interface having an IP Address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this can be derived from the instance." ::= { ospfNbrEntry 2 } ospfNbrRtrId OBJECT-TYPE SYNTAX RouterID ACCESS read-only STATUS mandatory DESCRIPTION "A 32-bit integer (represented as a type IpAd- dress) uniquely identifying the neighboring router in the Autonomous System." DEFVAL { '00000000'H } -- 0.0.0.0 ::= { ospfNbrEntry 3 } ospfNbrOptions OBJECT-TYPE SYNTAX Integer32 ACCESS read-only STATUS mandatory DESCRIPTION "A Bit Mask corresponding to the neighbor's op- tions field. Bit 0, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 1, if set, indicates that the associated area accepts and operates on external informa- tion; if zero, it is a stub area. Bit 2, if set, indicates that the system is ca- pable of routing IP Multicast datagrams; i.e., that it implements the Multicast Extensions to OSPF. Bit 3, if set, indicates that the associated area is an NSSA. These areas are capable of carrying type 7 external advertisements, which are translated into type 5 external advertise- ments at NSSA borders." REFERENCE "OSPF Version 2, Section 12.1.2 Options" DEFVAL { 0 } ::= { ospfNbrEntry 4 } ospfNbrPriority OBJECT-TYPE SYNTAX DesignatedRouterPriority ACCESS read-write STATUS mandatory DESCRIPTION "The priority of this neighbor in the designat- ed router election algorithm. The value 0 sig- nifies that the neighbor is not eligible to be- come the designated router on this particular network." DEFVAL { 1 } ::= { ospfNbrEntry 5 } ospfNbrState OBJECT-TYPE SYNTAX INTEGER { down (1), attempt (2), init (3), twoWay (4), exchangeStart (5), exchange (6), loading (7), full (8) } ACCESS read-only STATUS mandatory DESCRIPTION "The State of the relationship with this Neigh- bor." REFERENCE "OSPF Version 2, Section 10.1 Neighbor States" DEFVAL { down } ::= { ospfNbrEntry 6 } ospfNbrEvents OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of times this neighbor relationship has changed state, or an error has occurred." ::= { ospfNbrEntry 7 } ospfNbrLsRetransQLen OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The mandatory length of the retransmission queue." ::= { ospfNbrEntry 8 } ospfNbmaNbrStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent." ::= { ospfNbrEntry 9 } ospfNbmaNbrPermanence OBJECT-TYPE SYNTAX INTEGER { dynamic (1), -- learned through protocol permanent (2) -- configured address } ACCESS read-only STATUS mandatory DESCRIPTION "This variable displays the status of the en- try. 'dynamic' and 'permanent' refer to how the neighbor became known." DEFVAL { permanent } ::= { ospfNbrEntry 10 } ospfNbrHelloSuppressed OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether Hellos are being suppressed to the neighbor" ::= { ospfNbrEntry 11 } -- OSPF Virtual Neighbor Table -- This table describes all virtual neighbors. -- Since Virtual Links are configured in the -- virtual interface table, this table is read-only. ospfVirtNbrTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfVirtNbrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of virtual neighbor information." REFERENCE "OSPF Version 2, Section 15 Virtual Links" ::= { ospf 11 } ospfVirtNbrEntry OBJECT-TYPE SYNTAX OspfVirtNbrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Virtual neighbor information." INDEX { ospfVirtNbrArea, ospfVirtNbrRtrId } ::= { ospfVirtNbrTable 1 } OspfVirtNbrEntry ::= SEQUENCE { ospfVirtNbrArea AreaID, ospfVirtNbrRtrId RouterID, ospfVirtNbrIpAddr IpAddress, ospfVirtNbrOptions Integer32, ospfVirtNbrState INTEGER, ospfVirtNbrEvents Counter32, ospfVirtNbrLsRetransQLen Gauge32, ospfVirtNbrHelloSuppressed TruthValue } ospfVirtNbrArea OBJECT-TYPE SYNTAX AreaID ACCESS read-only STATUS mandatory DESCRIPTION "The Transit Area Identifier." ::= { ospfVirtNbrEntry 1 } ospfVirtNbrRtrId OBJECT-TYPE SYNTAX RouterID ACCESS read-only STATUS mandatory DESCRIPTION "A 32-bit integer uniquely identifying the neighboring router in the Autonomous System." ::= { ospfVirtNbrEntry 2 } ospfVirtNbrIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP address this Virtual Neighbor is us- ing." ::= { ospfVirtNbrEntry 3 } ospfVirtNbrOptions OBJECT-TYPE SYNTAX Integer32 ACCESS read-only STATUS mandatory DESCRIPTION "A Bit Mask corresponding to the neighbor's op- tions field. Bit 1, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 2, if set, indicates that the system is Network Multicast capable; ie, that it imple- ments OSPF Multicast Routing." ::= { ospfVirtNbrEntry 4 } ospfVirtNbrState OBJECT-TYPE SYNTAX INTEGER { down (1), attempt (2), init (3), twoWay (4), exchangeStart (5), exchange (6), loading (7), full (8) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of the Virtual Neighbor Relation- ship." ::= { ospfVirtNbrEntry 5 } ospfVirtNbrEvents OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of times this virtual link has changed its state, or an error has occurred." ::= { ospfVirtNbrEntry 6 } ospfVirtNbrLsRetransQLen OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "The mandatory length of the retransmission queue." ::= { ospfVirtNbrEntry 7 } ospfVirtNbrHelloSuppressed OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether Hellos are being suppressed to the neighbor" ::= { ospfVirtNbrEntry 8 } -- OSPF Link State Database, External -- The Link State Database contains the Link State -- Advertisements from throughout the areas that the -- device is attached to. -- This table is identical to the OSPF LSDB Table in -- format, but contains only External Link State -- Advertisements. The purpose is to allow external -- LSAs to be displayed once for the router rather -- than once in each non-stub area. ospfExtLsdbTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfExtLsdbEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The OSPF Process's Links State Database." REFERENCE "OSPF Version 2, Section 12 Link State Adver- tisements" ::= { ospf 12 } ospfExtLsdbEntry OBJECT-TYPE SYNTAX OspfExtLsdbEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single Link State Advertisement." INDEX { ospfExtLsdbType, ospfExtLsdbLsid, ospfExtLsdbRouterId } ::= { ospfExtLsdbTable 1 } OspfExtLsdbEntry ::= SEQUENCE { ospfExtLsdbType INTEGER, ospfExtLsdbLsid IpAddress, ospfExtLsdbRouterId RouterID, ospfExtLsdbSequence Integer32, ospfExtLsdbAge Integer32, ospfExtLsdbChecksum Integer32, ospfExtLsdbAdvertisement OCTET STRING } ospfExtLsdbType OBJECT-TYPE SYNTAX INTEGER { asExternalLink (5) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of the link state advertisement. Each link state type has a separate advertise- ment format." REFERENCE "OSPF Version 2, Appendix A.4.1 The Link State Advertisement header" ::= { ospfExtLsdbEntry 1 } ospfExtLsdbLsid OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement." REFERENCE "OSPF Version 2, Section 12.1.4 Link State ID" ::= { ospfExtLsdbEntry 2 } ospfExtLsdbRouterId OBJECT-TYPE SYNTAX RouterID ACCESS read-only STATUS mandatory DESCRIPTION "The 32 bit number that uniquely identifies the originating router in the Autonomous System." REFERENCE "OSPF Version 2, Appendix C.1 Global parameters" ::= { ospfExtLsdbEntry 3 } -- Note that the OSPF Sequence Number is a 32 bit signed -- integer. It starts with the value '80000001'h, -- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h -- Thus, a typical sequence number will be very negative. ospfExtLsdbSequence OBJECT-TYPE SYNTAX Integer32 ACCESS read-only STATUS mandatory DESCRIPTION "The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement." REFERENCE "OSPF Version 2, Section 12.1.6 LS sequence number" ::= { ospfExtLsdbEntry 4 } ospfExtLsdbAge OBJECT-TYPE SYNTAX Integer32 -- Should be 0..MaxAge ACCESS read-only STATUS mandatory DESCRIPTION "This field is the age of the link state adver- tisement in seconds." REFERENCE "OSPF Version 2, Section 12.1.1 LS age" ::= { ospfExtLsdbEntry 5 } ospfExtLsdbChecksum OBJECT-TYPE SYNTAX Integer32 ACCESS read-only STATUS mandatory DESCRIPTION "This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum." REFERENCE "OSPF Version 2, Section 12.1.7 LS checksum" ::= { ospfExtLsdbEntry 6 } ospfExtLsdbAdvertisement OBJECT-TYPE SYNTAX OCTET STRING (SIZE(36)) ACCESS read-only STATUS mandatory DESCRIPTION "The entire Link State Advertisement, including its header." REFERENCE "OSPF Version 2, Section 12 Link State Adver- tisements" ::= { ospfExtLsdbEntry 7 } -- OSPF Use of the CIDR Route Table ospfRouteGroup OBJECT IDENTIFIER ::= { ospf 13 } -- The IP Forwarding Table defines a number of objects for use by -- the routing protocol to externalize its information. Most of -- the variables (ipForwardDest, ipForwardMask, ipForwardPolicy, -- ipForwardNextHop, ipForwardIfIndex, ipForwardType, -- ipForwardProto, ipForwardAge, and ipForwardNextHopAS) are -- defined there. -- Those that leave some discretion are defined here. -- ipCidrRouteProto is, of course, ospf (13). -- ipCidrRouteAge is the time since the route was first calculated, -- as opposed to the time since the last SPF run. -- ipCidrRouteInfo is an OBJECT IDENTIFIER for use by the routing -- protocol. The following values shall be found there depending -- on the way the route was calculated. ospfIntraArea OBJECT IDENTIFIER ::= { ospfRouteGroup 1 } ospfInterArea OBJECT IDENTIFIER ::= { ospfRouteGroup 2 } ospfExternalType1 OBJECT IDENTIFIER ::= { ospfRouteGroup 3 } ospfExternalType2 OBJECT IDENTIFIER ::= { ospfRouteGroup 4 } -- ipCidrRouteMetric1 is, by definition, the primary routing -- metric. Therefore, it should be the metric that route -- selection is based on. For intra-area and inter-area routes, -- it is an OSPF metric. For External Type 1 (comparable value) -- routes, it is an OSPF metric plus the External Metric. For -- external Type 2 (non-comparable value) routes, it is the -- external metric. -- ipCidrRouteMetric2 is, by definition, a secondary routing -- metric. Therefore, it should be the metric that breaks a tie -- among routes having equal metric1 values and the same -- calculation rule. For intra-area, inter-area routes, and -- External Type 1 (comparable value) routes, it is unused. For -- external Type 2 (non-comparable value) routes, it is the metric -- to the AS border router. -- ipCidrRouteMetric3, ipCidrRouteMetric4, and ipCidrRouteMetric5 are -- unused. -- -- The OSPF Area Aggregate Table -- -- This table replaces the OSPF Area Summary Table, being an -- extension of that for CIDR routers. ospfAreaAggregateTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfAreaAggregateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A range of IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255. Note that if ranges are configured such that one range sub- sumes another range (e.g., 10.0.0.0 mask 255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the most specific match is the preferred one." REFERENCE "OSPF Version 2, Appendix C.2 Area parameters" ::= { ospf 14 } ospfAreaAggregateEntry OBJECT-TYPE SYNTAX OspfAreaAggregateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A range of IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255. Note that if ranges are range configured such that one range subsumes another range (e.g., 10.0.0.0 mask 255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the most specific match is the preferred one." REFERENCE "OSPF Version 2, Appendix C.2 Area parameters" INDEX { ospfAreaAggregateAreaID, ospfAreaAggregateLsdbType, ospfAreaAggregateNet, ospfAreaAggregateMask } ::= { ospfAreaAggregateTable 1 } OspfAreaAggregateEntry ::= SEQUENCE { ospfAreaAggregateAreaID AreaID, ospfAreaAggregateLsdbType INTEGER, ospfAreaAggregateNet IpAddress, ospfAreaAggregateMask IpAddress, ospfAreaAggregateStatus RowStatus, ospfAreaAggregateEffect INTEGER } ospfAreaAggregateAreaID OBJECT-TYPE SYNTAX AreaID ACCESS read-only STATUS mandatory DESCRIPTION "The Area the Address Aggregate is to be found within." REFERENCE "OSPF Version 2, Appendix C.2 Area parameters" ::= { ospfAreaAggregateEntry 1 } ospfAreaAggregateLsdbType OBJECT-TYPE SYNTAX INTEGER { summaryLink (3), nssaExternalLink (7) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of the Address Aggregate. This field specifies the Lsdb type that this Address Ag- gregate applies to." REFERENCE "OSPF Version 2, Appendix A.4.1 The Link State Advertisement header" ::= { ospfAreaAggregateEntry 2 } ospfAreaAggregateNet OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP Address of the Net or Subnet indicated by the range." REFERENCE "OSPF Version 2, Appendix C.2 Area parameters" ::= { ospfAreaAggregateEntry 3 } ospfAreaAggregateMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The Subnet Mask that pertains to the Net or Subnet." REFERENCE "OSPF Version 2, Appendix C.2 Area parameters" ::= { ospfAreaAggregateEntry 4 } ospfAreaAggregateStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent." ::= { ospfAreaAggregateEntry 5 } ospfAreaAggregateEffect OBJECT-TYPE SYNTAX INTEGER { advertiseMatching (1), doNotAdvertiseMatching (2), advertiseDoNotAggregate (3) } ACCESS read-write STATUS mandatory DESCRIPTION "Subnets subsumed by ranges either trigger the advertisement of the indicated aggregate (ad- vertiseMatching), or result in the subnet's not being advertised at all outside the area." DEFVAL { advertiseMatching } ::= { ospfAreaAggregateEntry 6 } -- conformance information ospfConformance OBJECT IDENTIFIER ::= { ospf 15 } ospfGroups OBJECT IDENTIFIER ::= { ospfConformance 1 } ospfCompliances OBJECT IDENTIFIER ::= { ospfConformance 2 } -- compliance statements ospfCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement " MODULE -- this module MANDATORY-GROUPS { ospfBasicGroup, ospfAreaGroup, ospfStubAreaGroup, ospfIfGroup, ospfIfMetricGroup, ospfVirtIfGroup, ospfNbrGroup, ospfVirtNbrGroup, ospfAreaAggregateGroup } ::= { ospfCompliances 1 } -- units of conformance ospfBasicGroup OBJECT-GROUP OBJECTS { ospfRouterId, ospfAdminStat, ospfVersionNumber, ospfAreaBdrRtrStatus, ospfASBdrRtrStatus, ospfExternLsaCount, ospfExternLsaCksumSum, ospfTOSSupport, ospfOriginateNewLsas, ospfRxNewLsas, ospfExtLsdbLimit, ospfMulticastExtensions, ospfExitOverflowInterval, ospfDemandExtensions } STATUS current DESCRIPTION "These objects are required for OSPF systems." ::= { ospfGroups 1 } ospfAreaGroup OBJECT-GROUP OBJECTS { ospfAreaId, ospfImportAsExtern, ospfSpfRuns, ospfAreaBdrRtrCount, ospfAsBdrRtrCount, ospfAreaLsaCount, ospfAreaLsaCksumSum, ospfAreaSummary, ospfAreaStatus } STATUS current DESCRIPTION "These objects are required for OSPF systems supporting areas." ::= { ospfGroups 2 } ospfStubAreaGroup OBJECT-GROUP OBJECTS { ospfStubAreaId, ospfStubTOS, ospfStubMetric, ospfStubStatus, ospfStubMetricType } STATUS current DESCRIPTION "These objects are required for OSPF systems supporting stub areas." ::= { ospfGroups 3 } ospfLsdbGroup OBJECT-GROUP OBJECTS { ospfLsdbAreaId, ospfLsdbType, ospfLsdbLsid, ospfLsdbRouterId, ospfLsdbSequence, ospfLsdbAge, ospfLsdbChecksum, ospfLsdbAdvertisement } STATUS current DESCRIPTION "These objects are required for OSPF systems that display their link state database." ::= { ospfGroups 4 } ospfAreaRangeGroup OBJECT-GROUP OBJECTS { ospfAreaRangeAreaId, ospfAreaRangeNet, ospfAreaRangeMask, ospfAreaRangeStatus, ospfAreaRangeEffect } STATUS obsolete DESCRIPTION "These objects are required for non-CIDR OSPF systems that support multiple areas." ::= { ospfGroups 5 } ospfHostGroup OBJECT-GROUP OBJECTS { ospfHostIpAddress, ospfHostTOS, ospfHostMetric, ospfHostStatus, ospfHostAreaID } STATUS current DESCRIPTION "These objects are required for OSPF systems that support attached hosts." ::= { ospfGroups 6 } ospfIfGroup OBJECT-GROUP OBJECTS { ospfIfIpAddress, ospfAddressLessIf, ospfIfAreaId, ospfIfType, ospfIfAdminStat, ospfIfRtrPriority, ospfIfTransitDelay, ospfIfRetransInterval, ospfIfHelloInterval, ospfIfRtrDeadInterval, ospfIfPollInterval, ospfIfState, ospfIfDesignatedRouter, ospfIfBackupDesignatedRouter, ospfIfEvents, ospfIfAuthType, ospfIfAuthKey, ospfIfStatus, ospfIfMulticastForwarding, ospfIfDemand } STATUS current DESCRIPTION "These objects are required for OSPF systems." ::= { ospfGroups 7 } ospfIfMetricGroup OBJECT-GROUP OBJECTS { ospfIfMetricIpAddress, ospfIfMetricAddressLessIf, ospfIfMetricTOS, ospfIfMetricValue, ospfIfMetricStatus } STATUS current DESCRIPTION "These objects are required for OSPF systems." ::= { ospfGroups 8 } ospfVirtIfGroup OBJECT-GROUP OBJECTS { ospfVirtIfAreaId, ospfVirtIfNeighbor, ospfVirtIfTransitDelay, ospfVirtIfRetransInterval, ospfVirtIfHelloInterval, ospfVirtIfRtrDeadInterval, ospfVirtIfState, ospfVirtIfEvents, ospfVirtIfAuthType, ospfVirtIfAuthKey, ospfVirtIfStatus } STATUS current DESCRIPTION "These objects are required for OSPF systems." ::= { ospfGroups 9 } ospfNbrGroup OBJECT-GROUP OBJECTS { ospfNbrIpAddr, ospfNbrAddressLessIndex, ospfNbrRtrId, ospfNbrOptions, ospfNbrPriority, ospfNbrState, ospfNbrEvents, ospfNbrLsRetransQLen, ospfNbmaNbrStatus, ospfNbmaNbrPermanence, ospfNbrHelloSuppressed } STATUS current DESCRIPTION "These objects are required for OSPF systems." ::= { ospfGroups 10 } ospfVirtNbrGroup OBJECT-GROUP OBJECTS { ospfVirtNbrArea, ospfVirtNbrRtrId, ospfVirtNbrIpAddr, ospfVirtNbrOptions, ospfVirtNbrState, ospfVirtNbrEvents, ospfVirtNbrLsRetransQLen, ospfVirtNbrHelloSuppressed } STATUS current DESCRIPTION "These objects are required for OSPF systems." ::= { ospfGroups 11 } ospfExtLsdbGroup OBJECT-GROUP OBJECTS { ospfExtLsdbType, ospfExtLsdbLsid, ospfExtLsdbRouterId, ospfExtLsdbSequence, ospfExtLsdbAge, ospfExtLsdbChecksum, ospfExtLsdbAdvertisement } STATUS current DESCRIPTION "These objects are required for OSPF systems that display their link state database." ::= { ospfGroups 12 } ospfAreaAggregateGroup OBJECT-GROUP OBJECTS { ospfAreaAggregateAreaID, ospfAreaAggregateLsdbType, ospfAreaAggregateNet, ospfAreaAggregateMask, ospfAreaAggregateStatus, ospfAreaAggregateEffect } STATUS current DESCRIPTION "These objects are required for OSPF systems." ::= { ospfGroups 13 } END OSPF-TRAP-MIB DEFINITIONS ::= BEGIN -- RCC Changes -- Renamed ospfVirtIfAreaId to ospfVirtIfAreaID (defined in rfc1253) -- Renamed opsfLsdbLsid to ospfLsdbLSID (defined in rfc1253) -- Changed MODULE-IDENTITY to OBJECT-TYPE -- 6/5/97 removed ospfSetTrap variable. We will include it later. IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF ospfRouterId, ospfIfIpAddress, ospfAddressLessIf, ospfIfState, ospfVirtIfAreaId, ospfVirtIfNeighbor, ospfVirtIfState, ospfNbrIpAddr, ospfNbrAddressLessIndex, ospfNbrRtrId, ospfNbrState, ospfVirtNbrArea, ospfVirtNbrRtrId, ospfVirtNbrState, ospf FROM OSPF-MIB; ospfTrap MODULE-IDENTITY LAST-UPDATED "9501201225Z" -- Fri Jan 20 12:25:50 PST 1995 ORGANIZATION "IETF OSPF Working Group" CONTACT-INFO " Fred Baker Postal: Cisco Systems 519 Lado Drive Santa Barbara, California 93111 Tel: +1 805 681 0115 E-Mail: fred@cisco.com Rob Coltun Postal: RainbowBridge Communications Tel: (301) 340-9416 E-Mail: rcoltun@rainbow-bridge.com" DESCRIPTION "The MIB module to describe traps for the OSPF Version 2 Protocol." ::= { ospf 16 } -- ospfTrap OBJECT IDENTIFIER ::= { ospf 16 } -- Trap Support Objects -- The following are support objects for the OSPF traps. ospfTrapControl OBJECT IDENTIFIER ::= { ospfTrap 1 } ospfTraps OBJECT IDENTIFIER ::= { ospfTrap 2 } ospfConfigErrorType OBJECT-TYPE SYNTAX INTEGER { badVersion (1), areaMismatch (2), unknownNbmaNbr (3), -- Router is Dr eligible unknownVirtualNbr (4), authTypeMismatch(5), authFailure (6), netMaskMismatch (7), helloIntervalMismatch (8), deadIntervalMismatch (9), optionMismatch (10) } MAX-ACCESS read-only STATUS current DESCRIPTION "Potential types of configuration conflicts. Used by the ospfConfigError and ospfConfigVir- tError traps." ::= { ospfTrapControl 2 } ospfPacketType OBJECT-TYPE SYNTAX INTEGER { hello (1), dbDescript (2), lsReq (3), lsUpdate (4), lsAck (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF packet types." ::= { ospfTrapControl 3 } ospfPacketSrc OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of an inbound packet that can- not be identified by a neighbor instance." ::= { ospfTrapControl 4 } -- Traps ospfVirtIfStateChange NOTIFICATION-TYPE OBJECTS { ospfRouterId, -- The originator of the trap ospfVirtIfAreaId, ospfVirtIfNeighbor, ospfVirtIfState -- The new state } STATUS current DESCRIPTION "An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF vir- tual interface. This trap should be generated when the inter- face state regresses (e.g., goes from Point- to-Point to Down) or progresses to a terminal state (i.e., Point-to-Point)." ::= { ospfTraps 1 } ospfNbrStateChange NOTIFICATION-TYPE OBJECTS { ospfRouterId, -- The originator of the trap ospfNbrIpAddr, ospfNbrAddressLessIndex, ospfNbrRtrId, ospfNbrState -- The new state } STATUS current DESCRIPTION "An ospfNbrStateChange trap signifies that there has been a change in the state of a non- virtual OSPF neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way or Full). When an neighbor transitions from or to Full on non-broadcast multi-access and broadcast networks, the trap should be gen- erated by the designated router. A designated router transitioning to Down will be noted by ospfIfStateChange." ::= { ospfTraps 2 } ospfVirtNbrStateChange NOTIFICATION-TYPE OBJECTS { ospfRouterId, -- The originator of the trap ospfVirtNbrArea, ospfVirtNbrRtrId, ospfVirtNbrState -- The new state } STATUS current DESCRIPTION "An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF vir- tual neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full)." ::= { ospfTraps 3 } ospfIfConfigError NOTIFICATION-TYPE OBJECTS { ospfRouterId, -- The originator of the trap ospfIfIpAddress, ospfAddressLessIf, ospfPacketSrc, -- The source IP address ospfConfigErrorType, -- Type of error ospfPacketType } STATUS current DESCRIPTION "An ospfIfConfigError trap signifies that a packet has been received on a non-virtual in- terface from a router whose configuration parameters conflict with this router's confi- guration parameters. Note that the event op- tionMismatch should cause a trap only if it prevents an adjacency from forming." ::= { ospfTraps 4 } ospfVirtIfConfigError NOTIFICATION-TYPE OBJECTS { ospfRouterId, -- The originator of the trap ospfVirtIfAreaId, ospfVirtIfNeighbor, ospfConfigErrorType, -- Type of error ospfPacketType } STATUS current DESCRIPTION "An ospfConfigError trap signifies that a pack- et has been received on a virtual interface from a router whose configuration parameters conflict with this router's configuration parameters. Note that the event optionMismatch should cause a trap only if it prevents an ad- jacency from forming." ::= { ospfTraps 5 } ospfIfAuthFailure NOTIFICATION-TYPE OBJECTS { ospfRouterId, -- The originator of the trap ospfIfIpAddress, ospfAddressLessIf, ospfPacketSrc, -- The source IP address ospfConfigErrorType, -- authTypeMismatch or -- authFailure ospfPacketType } STATUS current DESCRIPTION "An ospfIfAuthFailure trap signifies that a packet has been received on a non-virtual in- terface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type." ::= { ospfTraps 6 } ospfVirtIfAuthFailure NOTIFICATION-TYPE OBJECTS { ospfRouterId, -- The originator of the trap ospfVirtIfAreaId, ospfVirtIfNeighbor, ospfConfigErrorType, -- authTypeMismatch or -- authFailure ospfPacketType } STATUS current DESCRIPTION "An ospfVirtIfAuthFailure trap signifies that a packet has been received on a virtual interface from a router whose authentication key or au- thentication type conflicts with this router's authentication key or authentication type." ::= { ospfTraps 7 } ospfIfStateChange NOTIFICATION-TYPE OBJECTS { ospfRouterId, -- The originator of the trap ospfIfIpAddress, ospfAddressLessIf, ospfIfState -- The new state } STATUS current DESCRIPTION "An ospfIfStateChange trap signifies that there has been a change in the state of a non-virtual OSPF interface. This trap should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup)." ::= { ospfTraps 16 } -- conformance information ospfTrapConformance OBJECT IDENTIFIER ::= { ospfTrap 3 } ospfTrapGroups OBJECT IDENTIFIER ::= { ospfTrapConformance 1 } ospfTrapCompliances OBJECT IDENTIFIER ::= { ospfTrapConformance 2 } -- compliance statements ospfTrapCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement " MODULE -- this module MANDATORY-GROUPS { ospfTrapControlGroup } GROUP ospfTrapControlGroup DESCRIPTION "This group is optional but recommended for all OSPF systems" ::= { ospfTrapCompliances 1 } -- units of conformance ospfTrapControlGroup OBJECT-GROUP OBJECTS { ospfConfigErrorType, ospfPacketType, ospfPacketSrc } STATUS current DESCRIPTION "These objects are required to control traps from OSPF systems." ::= { ospfTrapGroups 1 } END -- SECTION 1: Top Level Definitions SYNOPTICS-ROOT-MIB DEFINITIONS ::= BEGIN -- SynOptics Root MIB Release 1.7.2 -- Revision 8/27/99 -- Copyright 1996 - 99 Nortel Networks, Inc. -- All rights reserved. -- This Nortel Networks SNMP Management Information Base Specification -- (Specification) embodies Nortel Networks' confidential and -- proprietary intellectual property. Nortel Networks retains all -- title and ownership in the Specification, including any -- revisions. -- This Specification is supplied "AS IS," and Nortel Networks makes -- no warranty, either express or implied, as to the use, -- operation, condition, or performance of the Specification. -- Imports IMPORTS enterprises FROM RFC1155-SMI; -- Textual Conventions SnpxBackplaneType ::= INTEGER { other(1), -- none of the following eth(2), -- ethernet ethTok(3), -- ethernet and tokenring ethFddi(4), -- ethernet and FDDI ethTokFddi(5), -- ethernet, tokenring, and FDDI ethTokRed(6), -- ethernet and tokenring with -- redundant powersupply ethTokFddiRed(7), -- ethernet, tokenring, and FDDI -- with redundant powersupply tok(8), -- tokenring enetTrFastEnet(9), -- ethernet, tokenring, and fast ethernet enetFastEnet(10), -- ethernet and fast ethernet enetTrFastEnetRed(11), -- ethernet, tokenring, and fast ethernet -- with redundant powersupply enetFastGigEnet(12) -- ethernet, fast, and gigabit ethernet } -- This type is used to specify a concentrator backplane. SnpxChassisType ::= INTEGER { other(1), -- none of the following m3000(2), -- product 3000 m3030(3), -- product 3030 m2310(4), -- product 2310 m2810(5), -- product 2810 m2912(6), -- product 2912 m2914(7), -- product 2914 m271x(8), -- product 271x m2813(9), -- product 2813 m2814(10), -- product 2814 m2915(11), -- product 2915 m5000(12), -- product 5000 m2813SA(13), -- product 2813SA m2814SA(14), -- product 2814SA m810M(15), -- product 810M m1032x(16), -- product EtherCell m5005(17), -- product 5005 mAlcatelEthConc(18), -- product Alcatel Ethernet workgroup conc. m2715SA(20), -- product 2715SA m2486(21), -- product 2486 m28xxx(22), -- product 28000 series m2300x(23), -- product 23000 series m5DN00x(24), -- product 5DN00x series mBayStackEth(25), -- product BayStack Ethernet m2310x(26), -- product 23100 series mBayStack100Hub(27), -- product 100Base-T Hub m3000FastEth(28), -- product 3000 Fast Ethernet mXediaSwitch(29), -- product Orion switch notUsed(30), -- not used m28200EthSwitch(31), -- product DDS mCent6Slot(32), -- product Centillion mCent12Slot(33), -- product Centillion mCent1Slot(34), -- product Centillion mBayStack301(35), -- product BayStack 301 mBayStackTr(36), -- product BayStack TokenRing Hub mFVC10625(37), -- product FVC Multimedia Switch mSwitchNode(38), -- product Switch Node mBayStack302(39), -- product BayStack 302 Switch mBayStack350(40), -- product BayStack 350 Switch mBayStack150(41), -- product BayStack 150 Ethernet Hub mCent50N3Slot(42), -- product Centillion 50N switch mCent50T3Slot(43), -- product Centillion 50T switch mBayStack303-304(44), -- product BayStack 303 and 304 Switches mBayStack200(45), -- product BayStack 200 Ethernet Hub mBayStack250(46), -- product BayStack 250 10/100 Ethernet Hub mBayStack450(48), -- product BayStack 450 10/100/1000 Switches mBayStack410(49), -- product BayStack 410 10/100 Switches mAccelar1200(50), -- product Accelar 1200 L3 Switch mAccelar1250(51), -- product Accelar 1250 L3 Switch mAccelar1100(52), -- product Accelar 1100 L3 Switch mAccelar1150(53), -- product Accelar 1150 L3 Switch mAccelar1050(54), -- product Accelar 1050 L3 Switch mAccelar1051(55), -- product Accelar 1051 L3 Switch mAccelar8610(56), -- product Accelar 8610 L3 Switch mAccelar8606(57), -- product Accelar 8606 L3 Switch mAccelar8010(58), -- product Accelar 8010 mAccelar8006(59), -- product Accelar 8006 mBayStack670(60), -- product BayStack 670 wireless access point mAccelar740(61), -- product Accelar 740 mAccelar750(62), -- product Accelar 750 mAccelar790(63), -- product Accelar 790 mBayStack460(64), -- product BayStack 460 10/100 Switches mAccelar8110(65), -- product Accelar 8110 L2 Switch mAccelar8106(66), -- product Accelar 8106 L2 Switch mBayStack3580(67), -- product BayStack 3580 Gig Switch mAccelar8010co(68) -- product Accelar 8010co } -- This type is used to specify a concentrator chassis. -- Top Branches under "synoptics" synoptics OBJECT IDENTIFIER ::= { enterprises 45 } products OBJECT IDENTIFIER ::= { synoptics 1 } temporary OBJECT IDENTIFIER ::= { synoptics 2 } registration OBJECT IDENTIFIER ::= { synoptics 3 } policy OBJECT IDENTIFIER ::= { synoptics 4 } -- Branches under "products" series1000 OBJECT IDENTIFIER ::= { products 1 } s3SnmpAgent OBJECT IDENTIFIER ::= { products 2 } series3000 OBJECT IDENTIFIER ::= { products 3 } superAgent OBJECT IDENTIFIER ::= { products 4 } specialTraps OBJECT IDENTIFIER ::= { products 5 } series5000 OBJECT IDENTIFIER ::= { products 6 } lanSwitch OBJECT IDENTIFIER ::= { products 7 } -- Branches under "temporary" -- ieee8023 OBJECT IDENTIFIER ::= { temporary 1 } -- proj1(del) OBJECT IDENTIFIER ::= { temporary 2 } -- proj2(sa) OBJECT IDENTIFIER ::= { temporary 3 } -- proj3(lc) OBJECT IDENTIFIER ::= { temporary 4 } -- proj4(pen) OBJECT IDENTIFIER ::= { temporary 5 } -- proj5(phe) OBJECT IDENTIFIER ::= { temporary 6 } -- proj6(fddi) OBJECT IDENTIFIER ::= { temporary 7 } -- proj7(xo) OBJECT IDENTIFIER ::= { temporary 8 } -- Branches under "registration" (values for object sysObjectId) s3reg-other OBJECT IDENTIFIER ::= { registration 1 } s3reg-3000 OBJECT IDENTIFIER ::= { registration 2 } s3reg-3000-enetNMM OBJECT IDENTIFIER ::= { s3reg-3000 1 } s3reg-3000-trNMM OBJECT IDENTIFIER ::= { s3reg-3000 2 } s3reg-3000-FDDI-NMM OBJECT IDENTIFIER ::= { s3reg-3000 3 } s3reg-3000-FastEthNMM OBJECT IDENTIFIER ::= { s3reg-3000 4 } s3reg-3000-ethSwitchNMM OBJECT IDENTIFIER ::= { s3reg-3000 5 } s3reg-3030 OBJECT IDENTIFIER ::= { registration 3 } s3reg-3030-enetNMM OBJECT IDENTIFIER ::= { s3reg-3030 1 } s3reg-3030-trNMM OBJECT IDENTIFIER ::= { s3reg-3030 2 } s3reg-3030-FDDI-NMM OBJECT IDENTIFIER ::= { s3reg-3030 3 } s3reg-3030-ethSwitchNMM OBJECT IDENTIFIER ::= { s3reg-3030 4 } s3reg-2310 OBJECT IDENTIFIER ::= { registration 4 } s3reg-2310-enetNMM OBJECT IDENTIFIER ::= { s3reg-2310 1 } s3reg-2310-trNMM OBJECT IDENTIFIER ::= { s3reg-2310 2 } s3reg-2310-FDDI-NMM OBJECT IDENTIFIER ::= { s3reg-2310 3 } s3reg-332X OBJECT IDENTIFIER ::= { registration 5 } s3reg-332XS OBJECT IDENTIFIER ::= { registration 6 } s3reg-3356 OBJECT IDENTIFIER ::= { registration 7 } s3reg-2810 OBJECT IDENTIFIER ::= { registration 8 } s3reg-2810-enetNMM OBJECT IDENTIFIER ::= { s3reg-2810 1 } s3reg-2715 OBJECT IDENTIFIER ::= { registration 9 } s3reg-2715-trNMM OBJECT IDENTIFIER ::= { s3reg-2715 1 } s3reg-291X OBJECT IDENTIFIER ::= { registration 10 } s3reg-291X-FDDI-NMM OBJECT IDENTIFIER ::= { s3reg-291X 1 } s3reg-3394 OBJECT IDENTIFIER ::= { registration 11 } s3reg-281X OBJECT IDENTIFIER ::= { registration 12 } s3reg-281X-enetNMM OBJECT IDENTIFIER ::= { s3reg-281X 1 } s5reg-5000 OBJECT IDENTIFIER ::= { registration 13 } s5reg-5000-ethNMM -- Ethernet NMM in 5000 Chassis OBJECT IDENTIFIER ::= { s5reg-5000 1 } s5reg-5000-tokNMM -- Token Ring NMM in 5000 Chassis OBJECT IDENTIFIER ::= { s5reg-5000 2 } s5reg-5000-fddNMM -- FDDI NMM in 5000 Chassis OBJECT IDENTIFIER ::= { s5reg-5000 3 } s5reg-5000-atmNMM -- ATM NMM in 5000 Chassis OBJECT IDENTIFIER ::= { s5reg-5000 4 } s5reg-5000-ethSwitchNMM -- Ethernet Switch NMM in 5000 Chassis OBJECT IDENTIFIER ::= {s5reg-5000 5} s5reg-5000-ethFastEthNMM -- 10/100 Ethernet NMM in 5000 Chassis OBJECT IDENTIFIER ::= { s5reg-5000 6 } s5reg-5000-eth10-100SwitchNMM -- 10/100 Ethernet Switch NMM in 5000 Chassis OBJECT IDENTIFIER ::= { s5reg-5000 7 } s3reg-281XSA OBJECT IDENTIFIER ::= { registration 14 } s3reg-281XSA-enetNMM OBJECT IDENTIFIER ::= { s3reg-281XSA 1 } lsreg-28xxx OBJECT IDENTIFIER ::= { registration 15 } lsreg-28xxx-NMM OBJECT IDENTIFIER ::= { lsreg-28xxx 1 } s3reg-8xx OBJECT IDENTIFIER ::= { registration 16 } s3reg-810M-enetNMM OBJECT IDENTIFIER ::= { s3reg-8xx 1 } s5reg-5005 OBJECT IDENTIFIER ::= { registration 17 } s5reg-5005-ethNMM -- Ethernet NMM in 5005 Chassis OBJECT IDENTIFIER ::= { s5reg-5005 1 } s5reg-5005-tokNMM -- Token Ring NMM in 5005 Chassis OBJECT IDENTIFIER ::= { s5reg-5005 2 } s5reg-5005-ethSwitchNMM -- Ethernet Switch NMM in 5005 Chassis OBJECT IDENTIFIER ::= { s5reg-5005 3 } s5reg-5005-fddNMM -- FDDI NMM in 5005 Chassis OBJECT IDENTIFIER ::= { s5reg-5005 4 } s5reg-5005-ethFastEthNMM -- 10/100 Ethernet NMM in 5005 Chassis OBJECT IDENTIFIER ::= { s5reg-5005 5 } s5reg-5005-eth10-100SwitchNMM -- 10/100 Ethernet Switch NMM in 5005 Chassis OBJECT IDENTIFIER ::= { s5reg-5005 7 } s3reg-AlcatelConc OBJECT IDENTIFIER ::= { registration 18 } s3reg-AlcatelEthConc-enetNMM OBJECT IDENTIFIER ::= { s3reg-AlcatelConc 1 } s3reg-271XSA OBJECT IDENTIFIER ::= { registration 19 } s3reg-271XSA-trNMM OBJECT IDENTIFIER ::= { s3reg-271XSA 1 } ecreg-1032x OBJECT IDENTIFIER ::= { registration 20 } s3reg-1032x-NMM OBJECT IDENTIFIER ::= { ecreg-1032x 1 } sreg-5DN00x OBJECT IDENTIFIER ::= { registration 21 } sreg-5DN00x-EthNMM OBJECT IDENTIFIER ::= { sreg-5DN00x 1 } sreg-BayStackEth OBJECT IDENTIFIER ::= { registration 22 } sreg-BayStackEth-ethNMM OBJECT IDENTIFIER ::= { sreg-BayStackEth 1 } sreg-2300x OBJECT IDENTIFIER ::= { registration 23 } sreg-2300x-NMM OBJECT IDENTIFIER ::= { sreg-2300x 1 } sreg-2310x OBJECT IDENTIFIER ::= { registration 24 } sreg-2310x-NMM OBJECT IDENTIFIER ::= { sreg-2310x 1 } sreg-Orion OBJECT IDENTIFIER ::= { registration 25 } sreg-Orion-ethNMM OBJECT IDENTIFIER ::= { sreg-Orion 1 } sreg-BayStack100Hub OBJECT IDENTIFIER ::= { registration 26 } sreg-BayStack100Unit-12Port OBJECT IDENTIFIER ::= { sreg-BayStack100Hub 1 } sreg-BayStackTr OBJECT IDENTIFIER ::= { registration 27 } sreg-BayStackTr-trNMM -- BayStackTr NMM in a virtual Chassis OBJECT IDENTIFIER ::= { sreg-BayStackTr 1 } lsreg-28200 OBJECT IDENTIFIER ::= { registration 28 } lsreg-28200-ethSwitchNMM -- 28200 Ethernet Switch OBJECT IDENTIFIER ::= { lsreg-28200 1 } sreg-BayStack302 OBJECT IDENTIFIER ::= { registration 29 } sreg-BayStack302-9port -- BayStack302 8+1Tx/Fx 10 Mb/s Ethernet Switch OBJECT IDENTIFIER ::= { sreg-BayStack302 1 } sreg-BayStack350 OBJECT IDENTIFIER ::= { registration 30 } sreg-BayStack350-ethSwitchNMM -- BayStack350 Family 10/100 Adaptive Switches OBJECT IDENTIFIER ::= { sreg-BayStack350 1 } sreg-BayStack350-24T-ethSwitchNMM -- BayStack 350-24T and -12T 10/100/1000 Adaptive Switches OBJECT IDENTIFIER ::= { sreg-BayStack350 2 } sreg-BayStack150Eth OBJECT IDENTIFIER ::= { registration 31 } sreg-BayStack150Eth-ethNMM OBJECT IDENTIFIER ::= { sreg-BayStack150Eth 1 } sreg-BayStack303-304 OBJECT IDENTIFIER ::= { registration 32 } sreg-BayStack303-304-Sw -- 12-24 10mb 1 100mb with MDA Switch OBJECT IDENTIFIER ::= { sreg-BayStack303-304 1 } sreg-BayStack303-24T-Sw -- 24 10mb 1 100mb with 2 MDA Switch OBJECT IDENTIFIER ::= { sreg-BayStack303-304 2 } sreg-BayStack200Eth OBJECT IDENTIFIER ::= { registration 33 } sreg-BayStack200Eth-ethNMM --BayStack200 Ethernet Hub OBJECT IDENTIFIER ::= { sreg-BayStack200Eth 1 } sreg-BayStack250Eth OBJECT IDENTIFIER ::= { registration 34 } sreg-BayStack250Eth-ethNMM --BayStack250 10/100 Ethernet Hub OBJECT IDENTIFIER ::= { sreg-BayStack250Eth 1 } sreg-BayStack450 OBJECT IDENTIFIER ::= { registration 35 } sreg-BayStack450-ethSwitchNMM --BayStack450 10/100/1000 Ethernet Switch OBJECT IDENTIFIER ::= { sreg-BayStack450 1 } sreg-BayStack410 OBJECT IDENTIFIER ::= { registration 36 } sreg-BayStack410-24T-ethSwitchNMM --BayStack 410-24T 10/100 Adaptive Switches OBJECT IDENTIFIER ::= { sreg-BayStack410 1 } sreg-BayStackICS OBJECT IDENTIFIER ::= { registration 37 } sreg-BayStackICS-NMM --BayStack Integrated Communication Server OBJECT IDENTIFIER ::= { sreg-BayStackICS 1 } s5reg-Accelar8010 OBJECT IDENTIFIER ::= { registration 38 } s5reg-Accelar8132TX --Ethernet Switch 32 port in 8010 Chassis OBJECT IDENTIFIER ::= { s5reg-Accelar8010 1 } s5reg-Accelar8148TX --Ethernet Switch 48 port in 8010 Chassis OBJECT IDENTIFIER ::= { s5reg-Accelar8010 2 } sreg-BayStack670 OBJECT IDENTIFIER ::= { registration 39 } sreg-BayStack670-wirelessLAN -- BayStack 670 11Mb/s wireless access point OBJECT IDENTIFIER ::= { sreg-BayStack670 1 } sreg-BayStack460 OBJECT IDENTIFIER ::= { registration 40 } sreg-BayStack460-24T-ethSwitchNMM --BayStack 460-24T 10/100 Switches OBJECT IDENTIFIER ::= { sreg-BayStack460 1 } sreg-BayStack3580 OBJECT IDENTIFIER ::= { registration 41 } sreg-BayStack3580-16F-gigEthSwitch --BayStack 3580-16F Gigabit Switch OBJECT IDENTIFIER ::= { sreg-BayStack3580 1 } END -- SECTION 1: Top Level Definitions S5-ETH-MULTISEG-TOPOLOGY-MIB DEFINITIONS ::= BEGIN -- 5000 Ethernet Multi-segment MIB Release 1.0.3 -- Revision 04/08/97 -- Copyright 1995, 96, 97 Bay Networks, Inc. -- All rights reserved. -- This Bay Networks SNMP Management Information Base Specification -- (Specification) embodies Bay Networks' confidential and -- proprietary intellectual property. Bay Networks retains all -- title and ownership in the Specification, including any -- revisions. -- This Specification is supplied "AS IS," and Bay Networks makes -- no warranty, either express or implied, as to the use, -- operation, condition, or performance of the Specification. -- Imports IMPORTS IpAddress, TimeTicks FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 SnpxChassisType, SnpxBackplaneType FROM SYNOPTICS-ROOT-MIB s5EnMsTop FROM S5-ROOT-MIB MacAddress FROM S5-TCS-MIB; -- Groups s5EnMsTopInfo OBJECT IDENTIFIER ::= { s5EnMsTop 1 } s5EnMsTopNmm OBJECT IDENTIFIER ::= { s5EnMsTop 2 } s5EnMsTopBdg OBJECT IDENTIFIER ::= { s5EnMsTop 3 } s5EnMsTopSrcMac OBJECT IDENTIFIER ::= { s5EnMsTop 4 } -- SECTION 2: MIB Objects -- Topology Status and Configuration Information s5EnMsTopIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "An IP address of the agent. This is used to fill in the IP address field of transmitted SONMP packets. The agent should be reachable through this IP address." ::= { s5EnMsTopInfo 1 } s5EnMsTopStatus OBJECT-TYPE SYNTAX INTEGER { topOn(1), topOff(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates if the agent is participating in multi-segment topology. The values are: topOn(1)....topology is on topOff(2)...topology is off When the value is topOff(2) the status of topology table entries is undefined. However, the agent should make its best attempt when the value is changed to topOff(2) to remove all existing instances of topology MIB objects. The agent must save the setting of this object in nonvolatile memory (i.e., save across reboots)." ::= { s5EnMsTopInfo 2 } s5EnMsTopNmmLstChg OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime the last time an entry in the NMM topology table was added, deleted, or modified. If the NMM topology table has not changed since cold/warm start of the agent, then the value is zero." ::= { s5EnMsTopInfo 3 } s5EnMsTopBdgLstChg OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime the last time an entry in the bridge topology table was added, deleted, or modified. If the bridge topology table has not changed since cold/warm start of the agent, then the value is zero." ::= { s5EnMsTopInfo 4 } s5EnMsTopNmmMaxNum OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of entries in the NMM topology table." ::= { s5EnMsTopInfo 5 } s5EnMsTopNmmCurNum OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The current number of entries in the NMM topology table." ::= { s5EnMsTopInfo 6 } s5EnMsTopBdgMaxNum OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of entries in the bridge topology table." ::= { s5EnMsTopInfo 7 } s5EnMsTopBdgCurNum OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The current number of entries in the bridge topology table." ::= { s5EnMsTopInfo 8 } -- Network Management Module (NMM) Topology Table s5EnMsTopNmmTable OBJECT-TYPE SYNTAX SEQUENCE OF S5EnMsTopNmmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of topology information from each topology agent that sends out NMM topology messages, and that has been heard by the reporting topology agent. The number of entries is determined by the number of distinct topology messages received. A topology message is identified by a combination of the IP address and segment-identifier contained in the message, and the slot-port on which it is received. Entries in the table are created by reception of a 'new' NMM topology message. An entry is removed from the table after no messages are received from the corresponding topology agent in the required time interval. NOTE: there is an entry for the reporting agent with the values of slot and port set to zero." ::= { s5EnMsTopNmm 1 } s5EnMsTopNmmEntry OBJECT-TYPE SYNTAX S5EnMsTopNmmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A row in the NMM topology table. Entries in the table can not be created or deleted via SNMP." INDEX { s5EnMsTopNmmSlot, s5EnMsTopNmmPort, s5EnMsTopNmmIpAddr, s5EnMsTopNmmSegId } ::= { s5EnMsTopNmmTable 1 } S5EnMsTopNmmEntry ::= SEQUENCE { s5EnMsTopNmmSlot INTEGER, s5EnMsTopNmmPort INTEGER, s5EnMsTopNmmIpAddr IpAddress, s5EnMsTopNmmSegId INTEGER, s5EnMsTopNmmMacAddr MacAddress, s5EnMsTopNmmChassisType SnpxChassisType, s5EnMsTopNmmBkplType SnpxBackplaneType, s5EnMsTopNmmLocalSeg INTEGER, s5EnMsTopNmmCurState INTEGER } s5EnMsTopNmmSlot OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The slot on which the topology message was received. NOTE: There is an artificial 'row' for the reporting agent with slot and port equal to zero. NOTE: Non-modular devices that do not have multiple slots should set this value to 1." ::= { s5EnMsTopNmmEntry 1 } s5EnMsTopNmmPort OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The port on which the topology message was received. NOTE: there is an artificial 'row' for the reporting agent with slot and port equal to zero." ::= { s5EnMsTopNmmEntry 2 } s5EnMsTopNmmIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP address of the sender of the topology message." ::= { s5EnMsTopNmmEntry 3 } s5EnMsTopNmmSegId OBJECT-TYPE SYNTAX INTEGER (0..'FFFFFF'H) ACCESS read-only STATUS mandatory DESCRIPTION "The 'segment identifier' of the segment from which the remote agent sent the topology message. The value is extracted from the received topology message. Different devices may use different methods for representing the segment identifier. For example, system 5000 NMMs that run multi-segment autotopology use the SrcIndx of the segment as the segment identifier; switches use a computed a value equal to '(256 * s) + p' where 's' is the board, card or slot number and 'p' is the port number on and as seen by the switch sending the topology message; system 3000 NMMs use the lower three bytes of the MAC address of the NMM as the segment identifier. In any case, the 'segment identifier' uniquely identifies the network segment in the remote device from which the topology message was sent." ::= { s5EnMsTopNmmEntry 4 } s5EnMsTopNmmMacAddr OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "The MAC address of the sender of the topology message." ::= { s5EnMsTopNmmEntry 5 } s5EnMsTopNmmChassisType OBJECT-TYPE SYNTAX SnpxChassisType ACCESS read-only STATUS mandatory DESCRIPTION "The chassis type of the device that sent the topology message." ::= { s5EnMsTopNmmEntry 6 } s5EnMsTopNmmBkplType OBJECT-TYPE SYNTAX SnpxBackplaneType ACCESS read-only STATUS mandatory DESCRIPTION "The backplane type of the device that sent the topology message." ::= { s5EnMsTopNmmEntry 7 } s5EnMsTopNmmLocalSeg OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates if the sender of the topology message is on the same Ethernet segment (i.e., NOT across a bridge) as the reporting agent." ::= { s5EnMsTopNmmEntry 8 } s5EnMsTopNmmCurState OBJECT-TYPE SYNTAX INTEGER { topChanged(1), heartbeat(2), new(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of sender of the topology message. The values are: topChanged(1)...topology information has recently changed heartbeat(2)....topology information unchanged new(3)..........sending agent is in new state." ::= { s5EnMsTopNmmEntry 9 } -- Encoded Octet Strings for NMM Topology Table s5EnMsTopNmmEosSize OBJECT-TYPE SYNTAX INTEGER (0..1440) ACCESS read-only STATUS mandatory DESCRIPTION "The current size of a 'row' in the table s5EnMsTopNmmEosTable. This allows applications to be able to break apart 'rows' in the table." ::= { s5EnMsTopNmm 2 } s5EnMsTopNmmEosTable OBJECT-TYPE SYNTAX SEQUENCE OF S5EnMsTopNmmEosEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of encoded octet strings of entries in table s5EnMsTopNmmTable. The number of entries is determined by packing of 'rows' from s5EnMsTopNmmTable." ::= { s5EnMsTopNmm 3 } s5EnMsTopNmmEosEntry OBJECT-TYPE SYNTAX S5EnMsTopNmmEosEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A row in the table of encoded octet strings for table s5EnMsTopNmmTable. Instance returned in Response PDU: On GETs: instance specified is the instance returned. On GET-NEXTs: instance returned is the instance of the last record contained in the octet string. Entries in the table can not be created or deleted via SNMP." INDEX { s5EnMsTopNmmSlot, s5EnMsTopNmmPort, s5EnMsTopNmmIpAddr, s5EnMsTopNmmSegId } ::= { s5EnMsTopNmmEosTable 1 } S5EnMsTopNmmEosEntry ::= SEQUENCE { s5EnMsTopNmmEos OCTET STRING } s5EnMsTopNmmEos OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..1400)) ACCESS read-only STATUS mandatory DESCRIPTION "An encoded octet string. On reads it contains an integral number of 'rows' from table s5EnMsTopNmmTable. All 'rows' are the same size which is defined by object s5EnMsTopNmmEosSize." ::= { s5EnMsTopNmmEosEntry 1 } -- Bridge Topology Table s5EnMsTopBdgTable OBJECT-TYPE SYNTAX SEQUENCE OF S5EnMsTopBdgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of topology information from each Bridge in the network that is sending bridge topology messages that have been heard by the reporting agent. The number of entries is determined by the number of detected (and active) bridges. Entries in the table are created by reception of a topology message from a 'new' bridge. An entry is removed from the table after no messages are received from the corresponding bridge in the required time interval." ::= { s5EnMsTopBdg 1 } s5EnMsTopBdgEntry OBJECT-TYPE SYNTAX S5EnMsTopBdgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A row in the bridge topology table. Entries in the table can not be created or deleted via SNMP." INDEX { s5EnMsTopBdgSlotNum, s5EnMsTopBdgPortNum, s5EnMsTopBdgIpAddr } ::= { s5EnMsTopBdgTable 1 } S5EnMsTopBdgEntry ::= SEQUENCE { s5EnMsTopBdgSlotNum INTEGER, s5EnMsTopBdgPortNum INTEGER, s5EnMsTopBdgIpAddr IpAddress, s5EnMsTopBdgNumber INTEGER, s5EnMsTopBdgMacAddr MacAddress, s5EnMsTopBdgType INTEGER, s5EnMsTopBdgStatus INTEGER, s5EnMsTopBdgNumPorts INTEGER, s5EnMsTopBdgHelloPortNum INTEGER, s5EnMsTopBdgHelloPortType INTEGER, s5EnMsTopBdgHelloPortStatus INTEGER, s5EnMsTopBdgCompBdgMac1 MacAddress, s5EnMsTopBdgCompBdgMac2 MacAddress } s5EnMsTopBdgSlotNum OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The slot on which the topology message was received. NOTE: Non-modular devices that do not have multiple slots should set this value to 1." ::= { s5EnMsTopBdgEntry 1 } s5EnMsTopBdgPortNum OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The port on which the topology message was received." ::= { s5EnMsTopBdgEntry 2 } s5EnMsTopBdgIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP address of the bridge that sent the topology message." ::= { s5EnMsTopBdgEntry 3 } s5EnMsTopBdgNumber OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The 'Bridge Number' of the bridge that sent the topology message. This is the IEEE 802.1 bridge number." ::= { s5EnMsTopBdgEntry 4 } s5EnMsTopBdgMacAddr OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "The MAC Address of the bridge that sent the topology message." ::= { s5EnMsTopBdgEntry 5 } s5EnMsTopBdgType OBJECT-TYPE SYNTAX INTEGER { other(1), localSyn(2), remoteSyn(3), kalpana(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The 'kind of bridge' that sent the topology message. The values are: other(1).....unknown or other type locSyn(2)....local SynOptics bridge remSyn(3)....remote SynOptics bridge kalpana(4)...Kalpana bridge(switch) " ::= { s5EnMsTopBdgEntry 6 } s5EnMsTopBdgNumPorts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of ports on the bridge." ::= { s5EnMsTopBdgEntry 7 } s5EnMsTopBdgStatus OBJECT-TYPE SYNTAX INTEGER { other(1), active(2), standby(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current operational status from the bridge that sent the topology message. The values are: other(1).....unknown or other active(2)....bridge is active standby(3)...bridge is in standby A value of standby(3) means that at least ONE port is in standby mode. A value of active(2) means NO port is in standby mode." ::= { s5EnMsTopBdgEntry 8 } s5EnMsTopBdgHelloPortNum OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The port number used by the bridge to send the topology message. This port may or may not be in standby mode." ::= { s5EnMsTopBdgEntry 9 } s5EnMsTopBdgHelloPortType OBJECT-TYPE SYNTAX INTEGER { other(1), eth(2), tok4(3), tok16(4), fddi(5), t1(6) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of the port used by the bridge to send the topology message. The values are: other(1)...other or unknown type eth(2).....ethernet tok4(3)....4 Mbit token ring tok16(4)...16 Mbit token ring fddi(5)....fddi t1(6)......t1 Note: These enumerations were done for 'completeness'. No other value than eth(2) should ever be received by an ethernet agent." ::= { s5EnMsTopBdgEntry 10 } s5EnMsTopBdgHelloPortStatus OBJECT-TYPE SYNTAX INTEGER { other(1), active(2), standby(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The status of the port used by the bridge to send the topology message. The values are: other(1).....unknown or other active(2)....port is active standby(3)...port is in standby" ::= { s5EnMsTopBdgEntry 11 } s5EnMsTopBdgCompBdgMac1 OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "The first MAC address of a companion bridge of the bridge that sent the topology message. The value is 00:00:00:00:00:00 for local bridges (since there is no companion bridge) and also when the companion MAC address is unknown for remote bridges." ::= { s5EnMsTopBdgEntry 12 } s5EnMsTopBdgCompBdgMac2 OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "The second MAC address of a companion bridge of the bridge that sent the topology message. The value is 00:00:00:00:00:00 for local bridges (since there is no companion bridge) and also when the companion MAC address is unknown for remote bridges." ::= { s5EnMsTopBdgEntry 13 } -- Encoded Octet Strings for Bridge Topology Table s5EnMsTopBdgEosSize OBJECT-TYPE SYNTAX INTEGER (0..1440) ACCESS read-only STATUS mandatory DESCRIPTION "The current size of a 'row' in the table s5EnMsTopBdgEosTable. This allows applications to be able to break apart 'rows' in the table." ::= { s5EnMsTopBdg 2 } s5EnMsTopBdgEosTable OBJECT-TYPE SYNTAX SEQUENCE OF S5EnMsTopBdgEosEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of encoded octet strings of entries in table s5EnMsTopBdgTable. The number of entries is determined by packing of 'rows' from s5EnMsTopBdgTable." ::= { s5EnMsTopBdg 3 } s5EnMsTopBdgEosEntry OBJECT-TYPE SYNTAX S5EnMsTopBdgEosEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A row in the table of encoded octet strings for table s5EnMsTopBdgTable. Instance returned in Response PDU: On GETs: instance specified is the instance returned. On GET-NEXTs: instance returned is the instance of the last record contained in the octet string. Entries in the table can not be created or deleted via SNMP." INDEX { s5EnMsTopBdgSlotNum, s5EnMsTopBdgPortNum, s5EnMsTopBdgIpAddr } ::= { s5EnMsTopBdgEosTable 1 } S5EnMsTopBdgEosEntry ::= SEQUENCE { s5EnMsTopBdgEos OCTET STRING } s5EnMsTopBdgEos OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..1400)) ACCESS read-only STATUS mandatory DESCRIPTION "An encoded octet string. On reads it contains an integral number of 'rows' from table s5EnMsTopBdgTable. All 'rows' are the same size which is defined by object s5EnMsTopBdgEosSize." ::= { s5EnMsTopBdgEosEntry 1 } -- MAC Address-to-Segment Mapping Table -- Implementation of this group is optional. It is supported by those -- devices that use different source MAC addresses to transmit -- topology messages on different segments. s5EnMsTopSrcMacAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF S5EnMsTopSrcMacAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table describing the source MAC addresses that the agent uses to transmit topology messages on different segments in the device. The MAC addresses are preallocated and remain unchanged for the agent. However, the mapping between a MAC address and segment may change, since it can depend on the current physical and/or logical configuration of the device. Implementation of this group is required for those devices that use different source MAC addresses to transmit topology messages on different segments. Implementation of this group is optional otherwise." ::= { s5EnMsTopSrcMac 1 } s5EnMsTopSrcMacAddrEntry OBJECT-TYPE SYNTAX S5EnMsTopSrcMacAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A row in the table of MAC address-to-segment mappings. Entries in the table can not be created or deleted via SNMP." INDEX { s5EnMsTopSrcMacAddr } ::= { s5EnMsTopSrcMacAddrTable 1 } S5EnMsTopSrcMacAddrEntry ::= SEQUENCE { s5EnMsTopSrcMacAddr MacAddress, s5EnMsTopSrcMacSegId INTEGER } s5EnMsTopSrcMacAddr OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "The MAC address used to transmit topology messages." ::= { s5EnMsTopSrcMacAddrEntry 1 } s5EnMsTopSrcMacSegId OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "The 'segment-identifier' of the segment on which topology messages were transmitted." ::= { s5EnMsTopSrcMacAddrEntry 2 } s5EnMsTopSrcMacAddrLstChg OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime when an entry in the table s5EnMsTopSrcMacAddrTable was last changed. If no changes have been done since cold/warm start of the agent, then the value is zero." ::= { s5EnMsTopSrcMac 2 } END -- SECTION 1: Top Level Definitions S5-ROOT-MIB DEFINITIONS ::= BEGIN -- 5000 Root MIB Release 1.1.4 -- Revision 01/07/98 -- Copyright 1998 Bay Networks, Inc. -- All rights reserved. -- This Bay Networks SNMP Management Information Base Specification -- (Specification) embodies Bay Networks' confidential and -- proprietary intellectual property. Bay Networks retains all -- title and ownership in the Specification, including any -- revisions. -- This Specification is supplied "AS IS," and Bay Networks makes -- no warranty, either express or implied, as to the use, -- operation, condition, or performance of the Specification. -- Imports IMPORTS series5000 FROM SYNOPTICS-ROOT-MIB; -- Branches under "series5000" -- branch for registration of values for objects -- with syntax of OBJECT IDENTIFIER s5reg OBJECT IDENTIFIER ::= { series5000 1 } -- Branch for 'Enterprise' field values in traps s5Traps OBJECT IDENTIFIER ::= { series5000 2 } s5EthTrap -- Ethernet OBJECT IDENTIFIER ::= { s5Traps 1 } s5TokTrap -- Token Ring OBJECT IDENTIFIER ::= { s5Traps 2 } s5FddTrap -- FDDI OBJECT IDENTIFIER ::= { s5Traps 3 } s5ChaTrap -- Chassis OBJECT IDENTIFIER ::= { s5Traps 4 } s5ComTrap -- Common OBJECT IDENTIFIER ::= { s5Traps 5 } s5EcellTrap -- EtherCell OBJECT IDENTIFIER ::= { s5Traps 6 } atmTraps -- Atm OBJECT IDENTIFIER ::= { s5Traps 7 } -- Major 5000 MIB branches s5Chassis OBJECT IDENTIFIER ::= { series5000 3 } s5Agent OBJECT IDENTIFIER ::= { series5000 4 } s5Com OBJECT IDENTIFIER ::= { series5000 5 } s5Eth OBJECT IDENTIFIER ::= { series5000 6 } s5Tok OBJECT IDENTIFIER ::= { series5000 7 } s5Fddi OBJECT IDENTIFIER ::= { series5000 8 } s5EnTop OBJECT IDENTIFIER ::= { series5000 9 } s5TrTop OBJECT IDENTIFIER ::= { series5000 10 } s5FdTop OBJECT IDENTIFIER ::= { series5000 11 } s5EnMsTop OBJECT IDENTIFIER ::= { series5000 13 } s5AtmTop OBJECT IDENTIFIER ::= { series5000 14 } s5IfExt OBJECT IDENTIFIER ::= { series5000 15 } END -- SECTION 1: MIB Definition S5-TCS-MIB DEFINITIONS ::= BEGIN -- 5000 Common Textual Conventions MIB Release 1.1.2 -- Revision 07/28/94 -- Copyright 1993-94 SynOptics Communications, Inc. -- All rights reserved. -- This SynOptics SNMP Management Information Base Specification -- (Specification) embodies SynOptics' confidential and -- proprietary intellectual property. SynOptics retains all -- title and ownership in the Specification, including any -- revisions. -- This Specification is supplied "AS IS," and SynOptics makes -- no warranty, either express or implied, as to the use, -- operation, condition, or performance of the Specification. -- Textual Convention Definitions -- A textual conventions for MAC addresses. -- This is a 6 octet address in the "canonical" order -- defined by IEEE 802.1a, i.e., as if it were transmitted -- least significant bit first, even though 802.5 (in contrast -- to other 802.x protocols) requires MAC addresses to be -- transmitted most significant bit first. MacAddress ::= OCTET STRING (SIZE (6)) -- A textual convention for IPX addresses. The first four bytes -- are the network number in 'network order'. The last 6 bytes -- are the MAC address. IpxAddress ::= OCTET STRING (SIZE (10)) -- A textual convention for a period of time measured -- in units of 0.01 seconds. TimeIntervalHrd ::= INTEGER -- A textual convention for a period of time measured -- in units of seconds. TimeIntervalSec ::= INTEGER -- A textual convention for an Index of a "source". -- The values are encoded so that the same MIB object -- can be used to describe the same type of data, but -- from different sources. -- For the 5000 Chassis, this is encoded in the -- following base 10 fields: -- 1bbiii - identifies an interface on an NMM -- where 'bb' is the board index and -- 'iii' is the interface number. -- -- 2bbppp - identifies a connectivity port on -- a board where 'bb' is the board INDEX -- and 'ppp' is the port INDEX. -- -- 3bblll - identifies a local channel on a -- board where 'bb' is the board INDEX -- and 'll' is the local channel INDEX. -- -- 4bbccc - identifies a cluster on a board -- where 'bb' is the board INDEX and -- 'cc' is the cluster INDEX. -- -- 5bbfff - identifies a FPU on a board where -- 'bb' is the board INDEX, and 'fff' is -- the FPU INDEX. -- -- 6bbnnn - identifies host board backplane counters -- where 'bb' is the board INDEX, and -- 'nnn' is the segment INDEX. -- -- 7bbccc - identifies a NULL segment on a board -- where 'bb' is the board INDEX, and -- 'ccc' is the cluster INDEX. -- -- 8mmnnn - identifies a sum across all host board(s) -- connected to a given backplane segment -- where 'mm' is media type, and 'nnn' is -- the segment INDEX. (NOTE: This is currently -- only valid for Ethernet.) SrcIndx ::= INTEGER (1..999999) -- A textual convention for Media types MediaType ::= INTEGER { other(1), -- unknown or other type eth(2), -- ethernet tok(3), -- token ring fddi(4) -- FDDI } -- ATM later -- The FDDI backplane mode. FddiBkNetMode ::= INTEGER { other(1), -- other or unknown thruLow(2), thruHigh(3), thruLowThruHigh(4) } -- The backplane network ID. This is a numeric assignment -- made to a backplane channel, a piece of a divided -- backplane channel, or a grouping of several backplane -- channels (which is done for FDDI). The number (and values) -- of the backplane networks is determined by the setting -- of the channel divider(s) which split some or all -- the backplane channels into networks, and by -- grouping when allowed by the media (such as FDDI). -- Different media and backplane implementations may -- have a divider or not. Also, there may be different -- mappings of backplane network IDs to a divided (or -- undivided) backplane channel. -- -- Note to agent implementors - you must map the divided -- (or undivided) backplane channel to the numbering here -- based on the setting of the backplane channel divider(s), -- and/or the grouping of the channels for FDDI. BkNetId ::= INTEGER (1..255) -- The physical backplane channel identification. -- This does not change when a backplane is divided. -- A value of zero means no channel. Otherwise, the -- channels are numbered starting at one. BkChan ::= INTEGER (0..255) -- The physical local channel identification. -- A value of zero means no channel. Otherwise, the -- channels are numbered starting at one. LocChan ::= INTEGER (0..255) -- The attachment ID. This is either a backplane -- network ID, a local channel, or as an indication -- of no backplane network attachment. Negative numbers -- are used to identify local channels on a board. -- Where used, the board must also be specified -- (or implied). A value of zero is used to indicate -- no (or null) attachment. Positive numbers are the -- backplane network IDs. The number (and values) of -- the backplane networks is determined by the setting -- of the channel divider(s) which split some or all -- the backplane channels into backplane networks, -- and by grouping when allowed by the media (such as -- FDDI). Different media and implementations may have -- a divider or not. Also, there may be different -- mappings of backplane network IDs to a divided -- (or undivided) backplane channel. -- -- Note to agent implementors - you must map the divided -- (or undivided) backplane channel to the numbering here -- based on the setting of the backplane channel divider(s), -- and/or the grouping of the channels for FDDI. AttId ::= INTEGER (-255..255) END IGMP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, experimental, Counter32, Integer32, IpAddress, TimeTicks FROM SNMPv2-SMI RowStatus, TruthValue FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF; igmpMIB MODULE-IDENTITY LAST-UPDATED "9504281659Z" ORGANIZATION "IETF IDMR Working Group." CONTACT-INFO " Keith McCloghrie Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 US Phone: +1 408 526 5260 EMail: kzm@cisco.com" DESCRIPTION "The MIB module for IGMP Management." ::= { experimental 59 } igmpMIBObjects OBJECT IDENTIFIER ::= { igmpMIB 1 } igmp OBJECT IDENTIFIER ::= { igmpMIBObjects 1 } -- -- The IGMP Interface Table -- igmpInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the interfaces on which IGMP is enabled." ::= { igmp 1 } igmpInterfaceEntry OBJECT-TYPE SYNTAX IgmpInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) representing an interface on which IGMP is enabled." INDEX { igmpInterfaceIfIndex } ::= { igmpInterfaceTable 1 } IgmpInterfaceEntry ::= SEQUENCE { igmpInterfaceIfIndex Integer32, igmpInterfaceQueryInterval Integer32, igmpInterfaceStatus RowStatus, igmpInterfaceVersion INTEGER, igmpInterfaceQuerier IpAddress, igmpInterfaceQueryMaxResponseTime Integer32, igmpInterfaceQuerierPresentTimeout Integer32, igmpInterfaceLeaveEnabled TruthValue, igmpInterfaceVersion1QuerierTimer Integer32, igmpInterfaceWrongVersionQueries Counter32, igmpInterfaceJoins Counter32, igmpInterfaceLeaves Counter32, igmpInterfaceRobustness Integer32, igmpInterfaceLastMembQueryIntvl Integer32 } igmpInterfaceIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The interface for which IGMP is enabled." ::= { igmpInterfaceEntry 1 } igmpInterfaceQueryInterval OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The frequency at which IGMP Host-Query packets are transmitted on this interface." DEFVAL { 125 } ::= { igmpInterfaceEntry 2 } igmpInterfaceStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The activation of a row enables IGMP on the interface. The destruction of a row disables IGMP on the interface." ::= { igmpInterfaceEntry 3 } igmpInterfaceVersion OBJECT-TYPE SYNTAX INTEGER { version1(1), version2(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The version of IGMP which is running on this interface. This object can be used to configure a router capable of running either value. For IGMP to function correctly, all routers on a LAN must be configured to run the same version of IGMP on that LAN." DEFVAL { version2 } ::= { igmpInterfaceEntry 4 } igmpInterfaceQuerier OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the IGMP Querier on the IP subnet to which this interface is attached." ::= { igmpInterfaceEntry 5 } igmpInterfaceQueryMaxResponseTime OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum query response time advertised in IGMPv2 queries on this interface. Smaller values allow a router to prune groups faster." DEFVAL { 10 } ::= { igmpInterfaceEntry 6 } igmpInterfaceQuerierPresentTimeout OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "A timeout interval. If no IGMPv2 queries are heard on this interface within this timeout interval, the local router will take over the Querier on the IP subnet to which this interface is attached." DEFVAL { 255 } ::= { igmpInterfaceEntry 7 } igmpInterfaceLeaveEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "An indication of whether the processing of IGMPv2 Leave messages is enabled on this interface." DEFVAL { true } ::= { igmpInterfaceEntry 8 } igmpInterfaceVersion1QuerierTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining until the host assumes that there are no IGMPv1 routers present on the interface. While this is non-zero, the host will reply to all queries with version 1 membership reports." ::= { igmpInterfaceEntry 9 } igmpInterfaceWrongVersionQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of queries received whose IGMP version does not match igmpInterfaceVersion. IGMP requires that all routers on a LAN be configured to run the same version of IGMP. Thus, if any queries are received with the wrong version, this indicates a configuration error." ::= { igmpInterfaceEntry 10 } igmpInterfaceJoins OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times a group membership has been added on this interface; that is, the number of times an entry for this interface has been added to the Cache Table. This object gives an indication of the amount of IGMP activity over time." ::= { igmpInterfaceEntry 11 } igmpInterfaceLeaves OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times a group membership has been removed from this interface; that is, the number of times an entry for this interface has been deleted from the Cache Table. The difference between this and igmpInterfaceJoins indicates the current number of entries in the Cache Table." ::= { igmpInterfaceEntry 12 } igmpInterfaceRobustness OBJECT-TYPE SYNTAX Integer32 (2..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The robustness variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses." DEFVAL { 2 } ::= { igmpInterfaceEntry 14 } igmpInterfaceLastMembQueryIntvl OBJECT-TYPE SYNTAX Integer32 (2..255) MAX-ACCESS read-write STATUS current DESCRIPTION "" DEFVAL { 10 } ::= { igmpInterfaceEntry 15 } -- -- The IGMP Cache Table -- igmpCacheTable OBJECT-TYPE SYNTAX SEQUENCE OF IgmpCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the IP multicast groups for which there are members on a particular interface." ::= { igmp 2 } igmpCacheEntry OBJECT-TYPE SYNTAX IgmpCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the igmpCacheTable." INDEX { igmpCacheAddress, igmpCacheIfIndex } ::= { igmpCacheTable 1 } IgmpCacheEntry ::= SEQUENCE { igmpCacheAddress IpAddress, igmpCacheIfIndex Integer32, igmpCacheSelf TruthValue, -- excluded igmpCacheLastReporter IpAddress, igmpCacheUpTime TimeTicks, -- excluded igmpCacheExpiryTime TimeTicks, igmpCacheStatus RowStatus, igmpCacheVersion1HostTimer Integer32 } igmpCacheAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP multicast group address for which this entry contains information." ::= { igmpCacheEntry 1 } igmpCacheIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The interface for which this entry contains information for an IP multicast group address." ::= { igmpCacheEntry 2 } igmpCacheSelf OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "An indication of whether the local system is a member of this group address on this interface." DEFVAL { true } ::= { igmpCacheEntry 3 } igmpCacheLastReporter OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the source of the last membership report received for this IP Multicast group address on this interface. If no membership report has been received, this object has the value 0.0.0.0." ::= { igmpCacheEntry 4 } igmpCacheUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since the system joined this group address, or zero if the system is not currently a member." ::= { igmpCacheEntry 5 } igmpCacheExpiryTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum amount of time remaining before this entry will be aged out." ::= { igmpCacheEntry 6 } igmpCacheStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this entry." ::= { igmpCacheEntry 7 } igmpCacheVersion1HostTimer OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining until the local router will assume that there are no longer any IGMP version 1 members on the IP subnet attached to this interface. Upon hearing any IGMPv1 Membership Report, this value is reset to the group membership timer. While this time remaining is non-zero, the local router ignores any IGMPv2 Leave messages for this group that it receives on this interface." ::= { igmpCacheEntry 8 } -- conformance information igmpMIBConformance OBJECT IDENTIFIER ::= { igmpMIB 2 } igmpMIBCompliances OBJECT IDENTIFIER ::= { igmpMIBConformance 1 } igmpMIBGroups OBJECT IDENTIFIER ::= { igmpMIBConformance 2 } -- compliance statements igmpHostMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for hosts implementing the IGMP MIB." MODULE -- this module MANDATORY-GROUPS { igmpBaseMIBGroup } ::= { igmpMIBCompliances 1 } igmpRouterMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for routers implementing the IGMP MIB." MODULE -- this module MANDATORY-GROUPS { igmpBaseMIBGroup, igmpRouterMIBGroup } ::= { igmpMIBCompliances 2 } -- units of conformance igmpBaseMIBGroup OBJECT-GROUP OBJECTS { igmpCacheSelf, igmpCacheLastReporter, igmpCacheStatus, igmpInterfaceStatus } STATUS current DESCRIPTION "The basic collection of objects providing management of IGMP version 1 or 2." ::= { igmpMIBGroups 1 } igmpRouterMIBGroup OBJECT-GROUP OBJECTS { igmpCacheUpTime, igmpCacheExpiryTime, igmpInterfaceQueryInterval } STATUS current DESCRIPTION "A collection of additional objects for management of IGMP version 1 or 2 in routers." ::= { igmpMIBGroups 2 } igmpBaseVersion2MIBGroup OBJECT-GROUP OBJECTS { igmpInterfaceQuerier, igmpInterfaceVersion1QuerierTimer } STATUS current DESCRIPTION "A collection of additional objects for management of IGMP version 2." ::= { igmpMIBGroups 3 } igmpRouterVersion2MIBGroup OBJECT-GROUP OBJECTS { igmpInterfaceVersion, igmpInterfaceQueryMaxResponseTime, igmpInterfaceQuerierPresentTimeout, igmpInterfaceLeaveEnabled, igmpInterfaceWrongVersionQueries, igmpInterfaceJoins, igmpInterfaceLeaves, igmpCacheVersion1HostTimer } STATUS current DESCRIPTION "A collection of additional objects for management of IGMP version 2 in routers." ::= { igmpMIBGroups 4 } END IPX DEFINITIONS ::= BEGIN -- This MIB defines the management information for a system using the IPX -- protocol. The MIB consists of four groups: -- -- 1. System Group - contains general information about all instances -- of IPX on the system -- -- 2. Circuit Group - contains information about all circuits used by -- IPX on the system -- -- 3. Forwarding Group - contains generic routing information that -- must be provided by any IPX routing protocol. -- -- 4. Services Group - contains information about all known services. -- -- The MIB is designed to support multiple instances of the IPX -- protocol on one system via a system instance identifier which is the -- primary index for every table in this MIB. -- -- This MIB is designed to provide a basic framework for the management -- of systems implementing the IPX protocol. Additional MIBs may be -- created (especially in the area of IPX routing protocols) to contain -- more specific information. Whenever possible, these additional MIBs -- should follow the format of this IPX MIB. Information in these MIBs -- should be linked to this MIB via the use of the system instance -- identifier mentioned above. -- -- -- Changes: -- -- 4/15/94: Cleanup of some typographical errors -- -- 4/21/94: Change ipxCircNetNumber acces to read-write IMPORTS enterprises, Counter FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215 PhysAddress, DisplayString FROM RFC1213-MIB; novell OBJECT IDENTIFIER ::= { enterprises 23 } mibDoc OBJECT IDENTIFIER ::= { novell 2 } ipx OBJECT IDENTIFIER ::= { mibDoc 5 } -- Groups ipxSystem OBJECT IDENTIFIER ::= {ipx 1} ipxCircuit OBJECT IDENTIFIER ::= {ipx 2} ipxForwarding OBJECT IDENTIFIER ::= {ipx 3} ipxServices OBJECT IDENTIFIER ::= {ipx 4} ipxTraps OBJECT IDENTIFIER ::= {ipx 5} -- Types NetNumber ::= OCTET STRING (SIZE(4)) -- System Group -- This group contains global information about each instance of IPX -- running on one system. -- Basic System Table -- This table contains one entry for each instance of IPX running on -- the system. It contains the management information that should -- be made available by all implementations of the IPX protocol. ipxBasicSysTable OBJECT-TYPE SYNTAX SEQUENCE OF IPXBasicSysEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The IPX System table - basic information." ::= {ipxSystem 1} ipxBasicSysEntry OBJECT-TYPE SYNTAX IPXBasicSysEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry corresponds to one instance of IPX running on the system." INDEX {ipxBasicSysInstance} ::= {ipxBasicSysTable 1} IPXBasicSysEntry ::= SEQUENCE { ipxBasicSysInstance INTEGER, ipxBasicSysExistState INTEGER, ipxBasicSysNetNumber NetNumber, ipxBasicSysNode OCTET STRING, ipxBasicSysName OCTET STRING, ipxBasicSysInReceives Counter, ipxBasicSysInHdrErrors Counter, ipxBasicSysInUnknownSockets Counter, ipxBasicSysInDiscards Counter, ipxBasicSysInBadChecksums Counter, ipxBasicSysInDelivers Counter, ipxBasicSysNoRoutes Counter, ipxBasicSysOutRequests Counter, ipxBasicSysOutMalformedRequests Counter, ipxBasicSysOutDiscards Counter, ipxBasicSysOutPackets Counter, ipxBasicSysConfigSockets INTEGER, ipxBasicSysOpenSocketFails Counter } ipxBasicSysInstance OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The unique identifier of the instance of IPX to which this row corresponds. This value may be written only when creating a new entry in the table." ::= {ipxBasicSysEntry 1} ipxBasicSysExistState OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The validity of this entry in the IPX system table. Setting this field to off indicates that this entry may be deleted from the system table at the IPX implementation's discretion." ::= {ipxBasicSysEntry 2} ipxBasicSysNetNumber OBJECT-TYPE SYNTAX NetNumber ACCESS read-write STATUS mandatory DESCRIPTION "The network number portion of the IPX address of this system." ::= {ipxBasicSysEntry 3} ipxBasicSysNode OBJECT-TYPE SYNTAX OCTET STRING (SIZE(6)) ACCESS read-write STATUS mandatory DESCRIPTION "The node number portion of the IPX address of this system." ::= {ipxBasicSysEntry 4} ipxBasicSysName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..48)) ACCESS read-write STATUS mandatory DESCRIPTION "The readable name for this system." ::= {ipxBasicSysEntry 5} ipxBasicSysInReceives OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of IPX packets received, including those received in error." ::= {ipxBasicSysEntry 6} ipxBasicSysInHdrErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IPX packets discarded due to errors in their headers, including any IPX packet with a size less than the minimum of 30 bytes." ::= {ipxBasicSysEntry 7} ipxBasicSysInUnknownSockets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IPX packets discarded because the destination socket was not open." ::= {ipxBasicSysEntry 8} ipxBasicSysInDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IPX packets received but discarded due to reasons other than those accounted for by ipxBasicSysInHdrErrors, ipxBasicSysInUnknownSockets, ipxAdvSysInDiscards, and ipxAdvSysInCompressDiscards." ::= {ipxBasicSysEntry 9} ipxBasicSysInBadChecksums OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IPX packets received with incorrect checksums." ::= {ipxBasicSysEntry 10} ipxBasicSysInDelivers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of IPX packets delivered locally, including packets from local applications." ::= {ipxBasicSysEntry 11} ipxBasicSysNoRoutes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times no route to a destination was found." ::= {ipxBasicSysEntry 12} ipxBasicSysOutRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IPX packets supplied locally for transmission, not including any packets counted in ipxAdvForwPackets." ::= {ipxBasicSysEntry 13} ipxBasicSysOutMalformedRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IPX packets supplied locally that contained errors in their structure." ::= {ipxBasicSysEntry 14} ipxBasicSysOutDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of outgoing IPX packets discarded due to reasons other than those accounted for in ipxBasicSysOutMalformedRequests, ipxAdvSysOutFiltered, and ipxAdvSysOutCompressDiscards." ::= {ipxBasicSysEntry 15} ipxBasicSysOutPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of IPX packets transmitted." ::= {ipxBasicSysEntry 16} ipxBasicSysConfigSockets OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The configured maximum number of IPX sockets that may be open at one time." ::= {ipxBasicSysEntry 17} ipxBasicSysOpenSocketFails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IPX socket open calls which failed." ::= {ipxBasicSysEntry 18} -- Advanced System Table -- This table contains one entry for each instance of IPX running on -- the system. It contains the advanced management information that -- may not be available from all implementations of the IPX protocol. ipxAdvSysTable OBJECT-TYPE SYNTAX SEQUENCE OF IPXAdvSysEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The IPX System table - advanced information." ::= {ipxSystem 2} ipxAdvSysEntry OBJECT-TYPE SYNTAX IPXAdvSysEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry corresponds to one instance of IPX running on the system." INDEX {ipxAdvSysInstance} ::= {ipxAdvSysTable 1} IPXAdvSysEntry ::= SEQUENCE { ipxAdvSysInstance INTEGER, ipxAdvSysMaxPathSplits INTEGER, ipxAdvSysMaxHops INTEGER, ipxAdvSysInTooManyHops Counter, ipxAdvSysInFiltered Counter, ipxAdvSysInCompressDiscards Counter, ipxAdvSysNETBIOSPackets Counter, ipxAdvSysForwPackets Counter, ipxAdvSysOutFiltered Counter, ipxAdvSysOutCompressDiscards Counter, ipxAdvSysCircCount INTEGER, ipxAdvSysDestCount INTEGER, ipxAdvSysServCount INTEGER } ipxAdvSysInstance OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The unique identifier of the instance of IPX to which this row corresponds. This value may be written only when creating a new entry in the table." ::= {ipxAdvSysEntry 1} ipxAdvSysMaxPathSplits OBJECT-TYPE SYNTAX INTEGER (1..32) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of paths with equal routing metric value which this instance of the IPX may split between when forwarding packets." DEFVAL { 1 } ::= {ipxAdvSysEntry 2} ipxAdvSysMaxHops OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of hops a packet may take." DEFVAL { 64 } ::= {ipxAdvSysEntry 3} ipxAdvSysInTooManyHops OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IPX packets discarded due to exceeding the maximum hop count." ::= {ipxAdvSysEntry 4} ipxAdvSysInFiltered OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of incoming IPX packets discarded due to filtering." ::= {ipxAdvSysEntry 5} ipxAdvSysInCompressDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of incoming IPX packets discarded due to decompression errors." ::= {ipxAdvSysEntry 6} ipxAdvSysNETBIOSPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of NETBIOS packets received." ::= {ipxAdvSysEntry 7} ipxAdvSysForwPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of IPX packets forwarded." ::= {ipxAdvSysEntry 8} ipxAdvSysOutFiltered OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of outgoing IPX packets discarded due to filtering." ::= {ipxAdvSysEntry 9} ipxAdvSysOutCompressDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of outgoing IPX packets discarded due to compression errors." ::= {ipxAdvSysEntry 10} ipxAdvSysCircCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of circuits known to this instance of IPX." ::= {ipxAdvSysEntry 11} ipxAdvSysDestCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of currently reachable destinations known to this instance of IPX." ::= {ipxAdvSysEntry 12} ipxAdvSysServCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of services known to this instance of IPX." ::= {ipxAdvSysEntry 13} -- Circuit Group -- This group contains management information for each circuit known -- to this system. -- Circuit Table -- The Circuit table contains an entry for each circuit known to the -- system. ipxCircTable OBJECT-TYPE SYNTAX SEQUENCE OF IPXCircEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Circuit table." ::= {ipxCircuit 1} ipxCircEntry OBJECT-TYPE SYNTAX IPXCircEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry corresponds to one circuit known to the system." INDEX { ipxCircSysInstance, ipxCircIndex } ::= {ipxCircTable 1} IPXCircEntry ::= SEQUENCE { ipxCircSysInstance INTEGER, ipxCircIndex INTEGER, ipxCircExistState INTEGER, ipxCircOperState INTEGER, ipxCircIfIndex INTEGER, ipxCircName OCTET STRING, ipxCircType INTEGER, ipxCircDialName OCTET STRING, ipxCircLocalMaxPacketSize INTEGER, ipxCircCompressState INTEGER, ipxCircCompressSlots INTEGER, ipxCircStaticStatus INTEGER, ipxCircCompressedSent Counter, ipxCircCompressedInitSent Counter, ipxCircCompressedRejectsSent Counter, ipxCircUncompressedSent Counter, ipxCircCompressedReceived Counter, ipxCircCompressedInitReceived Counter, ipxCircCompressedRejectsReceived Counter, ipxCircUncompressedReceived Counter, ipxCircMediaType OCTET STRING, ipxCircNetNumber NetNumber, ipxCircStateChanges Counter, ipxCircInitFails Counter, ipxCircDelay INTEGER, ipxCircThroughput INTEGER, ipxCircNeighRouterName OCTET STRING, ipxCircNeighInternalNetNum NetNumber } ipxCircSysInstance OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The unique identifier of the instance of IPX to which this entry corresponds. This value may be written only when creating a new entry in the table." ::= {ipxCircEntry 1} ipxCircIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The identifier of this circuit, unique within the instance of IPX. This value may be written only when creating a new entry in the table." ::= {ipxCircEntry 2} ipxCircExistState OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The validity of this circuit entry. A circuit with this value set to off may be deleted from the table at the IPX implementation's discretion." ::= {ipxCircEntry 3} ipxCircOperState OBJECT-TYPE SYNTAX INTEGER { down(1), up(2), sleeping(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The operational state of the circuit." ::= {ipxCircEntry 4} ipxCircIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The value of ifIndex for the interface used by this circuit. This value may be written only when creating a new entry in the table." ::= {ipxCircEntry 5} ipxCircName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..48)) ACCESS read-write STATUS mandatory DESCRIPTION "The readable name for the circuit." ::= {ipxCircEntry 6} ipxCircType OBJECT-TYPE SYNTAX INTEGER { other(1), broadcast(2), ptToPt(3), wanRIP(4), unnumberedRIP(5), dynamic(6), wanWS(7) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of the circuit." ::= {ipxCircEntry 7} ipxCircDialName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..48)) ACCESS read-write STATUS mandatory DESCRIPTION "The symbolic name used to refernce the dialing information used to create this circuit. This value may be written only when creating a new entry in the table." ::= {ipxCircEntry 8} ipxCircLocalMaxPacketSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum size (including header), in bytes, that the system supports locally on this circuit." ::= {ipxCircEntry 9} ipxCircCompressState OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The compression state on this circuit. This value may be written only when creating a new entry in the table." DEFVAL { off } ::= {ipxCircEntry 10} ipxCircCompressSlots OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of compression slots available on this circuit. This value may be written only when creating a new entry in the table." DEFVAL { 16 } ::= {ipxCircEntry 11} ipxCircStaticStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), currentStatus(2), -- fixed due mib compiler error (was just 'current') changed(3), read(4), reading(5), write(6), writing(7) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether the information about static routes and services reached via this circuit matches that saved in permanent storage (current). Setting the value to write when it had the value changed will write the currently in use information to permanent storage, if supported. Setting the value to read when it had the value changed will replace any routes and services currently defined for the circuit with those read from permanent storage, if supported." ::= {ipxCircEntry 12} ipxCircCompressedSent OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of compressed packets sent." ::= {ipxCircEntry 13} ipxCircCompressedInitSent OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of compression initialization packets sent." ::= {ipxCircEntry 14} ipxCircCompressedRejectsSent OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of compressed packet rejected packets sent." ::= {ipxCircEntry 15} ipxCircUncompressedSent OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets sent without being compressed even though compression was turned on for this circuit." ::= {ipxCircEntry 16} ipxCircCompressedReceived OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of compressed packets received." ::= {ipxCircEntry 17} ipxCircCompressedInitReceived OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of compression initialization packets received." ::= {ipxCircEntry 18} ipxCircCompressedRejectsReceived OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of compressed packet rejected packets received." ::= {ipxCircEntry 19} ipxCircUncompressedReceived OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets received without having been compressed even though compression was turned on for this circuit." ::= {ipxCircEntry 20} ipxCircMediaType OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) ACCESS read-only STATUS mandatory DESCRIPTION "The media type used on this circuit." ::= {ipxCircEntry 21} ipxCircNetNumber OBJECT-TYPE SYNTAX NetNumber ACCESS read-write STATUS mandatory DESCRIPTION "The IPX network number of this circuit. This value may be written only when creating a new entry in the table." ::= {ipxCircEntry 22} ipxCircStateChanges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the circuit has changed state." ::= {ipxCircEntry 23} ipxCircInitFails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times that initialization of this circuit has failed." ::= {ipxCircEntry 24} ipxCircDelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The period of time, in milliseconds, that it takes to transmit one byte of data, excluding protocol headers, to a destination on the other end of the circuit, if the circuit is free of other traffic." ::= {ipxCircEntry 25} ipxCircThroughput OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The amount of data, in bits per second, that may flow through the circuit if there is no other traffic." ::= {ipxCircEntry 26} ipxCircNeighRouterName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..48)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the neighboring router on a WAN circuit." ::= {ipxCircEntry 27} ipxCircNeighInternalNetNum OBJECT-TYPE SYNTAX NetNumber ACCESS read-only STATUS mandatory DESCRIPTION "The internal network number of the neighboring router on a WAN circuit." ::= {ipxCircEntry 28} -- Forwarding Group -- This group provides a representation of the forwarding database used -- by all instances of IPX on the system. -- Destination Table -- The Destination table contains information about all known -- destinations. The routing information shown in this table represents -- the path currently being used to reach the destination. ipxDestTable OBJECT-TYPE SYNTAX SEQUENCE OF IPXDestEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Destination table contains information about all known destinations." ::= {ipxForwarding 1} ipxDestEntry OBJECT-TYPE SYNTAX IPXDestEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry corresponds to one destination." INDEX { ipxDestSysInstance, ipxDestNetNum } ::= {ipxDestTable 1} IPXDestEntry ::= SEQUENCE { ipxDestSysInstance INTEGER, ipxDestNetNum NetNumber, ipxDestProtocol INTEGER, ipxDestTicks INTEGER, ipxDestHopCount INTEGER, ipxDestNextHopCircIndex INTEGER, ipxDestNextHopNICAddress PhysAddress, ipxDestNextHopNetNum NetNumber } ipxDestSysInstance OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The unique identifier of the instance of IPX to which this row corresponds." ::= {ipxDestEntry 1} ipxDestNetNum OBJECT-TYPE SYNTAX NetNumber ACCESS read-only STATUS mandatory DESCRIPTION "The IPX network number of the destination." ::= {ipxDestEntry 2} ipxDestProtocol OBJECT-TYPE SYNTAX INTEGER { other(1), local(2), rip(3), nlsp(4), static(5) } ACCESS read-only STATUS mandatory DESCRIPTION "The routing protocol from which knowledge of this destination was obtained." ::= {ipxDestEntry 3} ipxDestTicks OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The delay in ticks to reach this destination." ::= {ipxDestEntry 4} ipxDestHopCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of hops necessary to reach the destination." ::= {ipxDestEntry 5} ipxDestNextHopCircIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The unique identifier of the circuit used to reach the next hop." ::= {ipxDestEntry 6} ipxDestNextHopNICAddress OBJECT-TYPE SYNTAX PhysAddress ACCESS read-only STATUS mandatory DESCRIPTION "The NIC address of the next hop." ::= {ipxDestEntry 7} ipxDestNextHopNetNum OBJECT-TYPE SYNTAX NetNumber ACCESS read-only STATUS mandatory DESCRIPTION "The IPX network number of the next hop." ::= {ipxDestEntry 8} -- Static Routes Table -- This table contains the information about all the static routes -- defined. There may be more than one static route to any given -- destination. Only the route currently being used will also be -- present in the Destination Table defined above. ipxStaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF IPXStaticRouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Static Routes table contains information about all destinations reached via statically configured routes." ::= {ipxForwarding 2} ipxStaticRouteEntry OBJECT-TYPE SYNTAX IPXStaticRouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry corresponds to one static route." INDEX { ipxStaticRouteSysInstance, ipxStaticRouteCircIndex, ipxStaticRouteNetNum } ::= {ipxStaticRouteTable 1} IPXStaticRouteEntry ::= SEQUENCE { ipxStaticRouteSysInstance INTEGER, ipxStaticRouteCircIndex INTEGER, ipxStaticRouteNetNum NetNumber, ipxStaticRouteExistState INTEGER, ipxStaticRouteTicks INTEGER, ipxStaticRouteHopCount INTEGER, ipxStaticRouteNextHop OCTET STRING } ipxStaticRouteSysInstance OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The unique identifier of the instance of IPX to which this row corresponds." ::= {ipxStaticRouteEntry 1} ipxStaticRouteCircIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The unique identifier of the circuit used to reach the first hop in the static route." ::= {ipxStaticRouteEntry 2} ipxStaticRouteNetNum OBJECT-TYPE SYNTAX NetNumber ACCESS read-write STATUS mandatory DESCRIPTION "The IPX network number of the route's destination." ::= {ipxStaticRouteEntry 3} ipxStaticRouteExistState OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The validity of this static route. Entries with the value set to off may be deleted from the table at the implementation's discretion." ::= {ipxStaticRouteEntry 4} ipxStaticRouteTicks OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The delay, in ticks, to reach the route's destination." ::= {ipxStaticRouteEntry 5} ipxStaticRouteHopCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of hops necessary to reach the destination." ::= {ipxStaticRouteEntry 6} ipxStaticRouteNextHop OBJECT-TYPE SYNTAX OCTET STRING (SIZE(6)) ACCESS read-write STATUS mandatory DESCRIPTION "Next hop node address." ::= {ipxStaticRouteEntry 7} -- Services Group -- The Services group contains management information for all known -- services. -- Services Table -- This table contains the services information indexed by service -- name and type. ipxServTable OBJECT-TYPE SYNTAX SEQUENCE OF IPXServEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of services, indexed by name and type." ::= {ipxServices 1} ipxServEntry OBJECT-TYPE SYNTAX IPXServEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry corresponds to one service." INDEX { ipxServSysInstance, ipxServType, ipxServName } ::= {ipxServTable 1} IPXServEntry ::= SEQUENCE { ipxServSysInstance INTEGER, ipxServType OCTET STRING, ipxServName DisplayString, ipxServProtocol INTEGER, ipxServNetNum NetNumber, ipxServNode OCTET STRING, ipxServSocket OCTET STRING, ipxServHopCount INTEGER } ipxServSysInstance OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The unique identifier of the instance of IPX to which this entry corresponds." ::= {ipxServEntry 1} ipxServType OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) ACCESS read-only STATUS mandatory DESCRIPTION "The service type." ::= {ipxServEntry 2} ipxServName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..48)) ACCESS read-only STATUS mandatory DESCRIPTION "The service name." ::= {ipxServEntry 3} ipxServProtocol OBJECT-TYPE SYNTAX INTEGER { other(1), local(2), nlsp(4), static(5), sap(6) } ACCESS read-only STATUS mandatory DESCRIPTION "The protocol from which knowledge of this service was obtained." ::= {ipxServEntry 4} ipxServNetNum OBJECT-TYPE SYNTAX NetNumber ACCESS read-only STATUS mandatory DESCRIPTION "The IPX network number portion of the IPX address of the service." ::= {ipxServEntry 5} ipxServNode OBJECT-TYPE SYNTAX OCTET STRING (SIZE(6)) ACCESS read-only STATUS mandatory DESCRIPTION "The node portion of the IPX address of the service." ::= {ipxServEntry 6} ipxServSocket OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) ACCESS read-only STATUS mandatory DESCRIPTION "The socket portion of the IPX address of the service." ::= {ipxServEntry 7} ipxServHopCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of hops to the service." ::= {ipxServEntry 8} -- Destination Services Table -- This table contains the services information indexed by address, -- name, and type. ipxDestServTable OBJECT-TYPE SYNTAX SEQUENCE OF IPXDestServEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of services, indexed by address, name, and type." ::= {ipxServices 2} ipxDestServEntry OBJECT-TYPE SYNTAX IPXDestServEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry corresponds to one service." INDEX { ipxDestServSysInstance, ipxDestServNetNum, ipxDestServNode, ipxDestServSocket, ipxDestServName, ipxDestServType } ::= {ipxDestServTable 1} IPXDestServEntry ::= SEQUENCE { ipxDestServSysInstance INTEGER, ipxDestServNetNum NetNumber, ipxDestServNode OCTET STRING, ipxDestServSocket OCTET STRING, ipxDestServName DisplayString, ipxDestServType OCTET STRING, ipxDestServProtocol INTEGER, ipxDestServHopCount INTEGER } ipxDestServSysInstance OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The unique identifier of the instance of IPX to which this entry corresponds." ::= {ipxDestServEntry 1} ipxDestServNetNum OBJECT-TYPE SYNTAX NetNumber ACCESS read-only STATUS mandatory DESCRIPTION "The IPX network number portion of the IPX address of the service." ::= {ipxDestServEntry 2} ipxDestServNode OBJECT-TYPE SYNTAX OCTET STRING (SIZE(6)) ACCESS read-only STATUS mandatory DESCRIPTION "The node portion of the IPX address of the service." ::= {ipxDestServEntry 3} ipxDestServSocket OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) ACCESS read-only STATUS mandatory DESCRIPTION "The socket portion of the IPX address of the service." ::= {ipxDestServEntry 4} ipxDestServName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..48)) ACCESS read-only STATUS mandatory DESCRIPTION "The service name." ::= {ipxDestServEntry 5} ipxDestServType OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) ACCESS read-only STATUS mandatory DESCRIPTION "The service type." ::= {ipxDestServEntry 6} ipxDestServProtocol OBJECT-TYPE SYNTAX INTEGER { other(1), local(2), nlsp(4), static(5), sap(6) } ACCESS read-only STATUS mandatory DESCRIPTION "The protocol from which knowledge of this service was obtained." ::= {ipxDestServEntry 7} ipxDestServHopCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of hops to the service." ::= {ipxDestServEntry 8} -- Static Services Table -- This table contains information for all services reached via a -- static route. ipxStaticServTable OBJECT-TYPE SYNTAX SEQUENCE OF IPXStaticServEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Static Services table contains information about all services reached via statically configured routes." ::= {ipxServices 3} ipxStaticServEntry OBJECT-TYPE SYNTAX IPXStaticServEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry corresponds to one service." INDEX { ipxStaticServSysInstance, ipxStaticServCircIndex, ipxStaticServName, ipxStaticServType } ::= {ipxStaticServTable 1} IPXStaticServEntry ::= SEQUENCE { ipxStaticServSysInstance INTEGER, ipxStaticServCircIndex INTEGER, ipxStaticServName DisplayString, ipxStaticServType OCTET STRING, ipxStaticServExistState INTEGER, ipxStaticServNetNum NetNumber, ipxStaticServNode OCTET STRING, ipxStaticServSocket OCTET STRING, ipxStaticServHopCount INTEGER } ipxStaticServSysInstance OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The unique identifier of the instance of IPX to which this entry corresponds." ::= {ipxStaticServEntry 1} ipxStaticServCircIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The circuit used to reach this service." ::= {ipxStaticServEntry 2} ipxStaticServName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..48)) ACCESS read-write STATUS mandatory DESCRIPTION "The service name." ::= {ipxStaticServEntry 3} ipxStaticServType OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) ACCESS read-write STATUS mandatory DESCRIPTION "The service type." ::= {ipxStaticServEntry 4} ipxStaticServExistState OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The validity of this static service. Entries with the value set to off may be deleted from the table at the implementation's discretion." ::= {ipxStaticServEntry 5} ipxStaticServNetNum OBJECT-TYPE SYNTAX NetNumber ACCESS read-write STATUS mandatory DESCRIPTION "The IPX network number portion of the IPX address of the service." ::= {ipxStaticServEntry 6} ipxStaticServNode OBJECT-TYPE SYNTAX OCTET STRING (SIZE(6)) ACCESS read-write STATUS mandatory DESCRIPTION "The node portion of the IPX address of the service." ::= {ipxStaticServEntry 7} ipxStaticServSocket OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) ACCESS read-write STATUS mandatory DESCRIPTION "The socket portion of the IPX address of the service." ::= {ipxStaticServEntry 8} ipxStaticServHopCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of hops to the service." ::= {ipxStaticServEntry 9} -- Traps -- The section describes the traps defined for IPX. ipxTrapCircuitDown TRAP-TYPE ENTERPRISE ipxTraps VARIABLES { ipxCircSysInstance, ipxCircIndex } DESCRIPTION "This trap signifies that the specified circuit has gone down." ::= 1 ipxTrapCircuitUp TRAP-TYPE ENTERPRISE ipxTraps VARIABLES { ipxCircSysInstance, ipxCircIndex } DESCRIPTION "This trap signifies that the specified circuit has come up." ::= 2 END -- ***************************************************************** -- NOVELL-RIPSAP-MIB.my: Novell IPX RIP/SAP MIB -- -- October 1994, Jeffrey T. Johnson -- -- Copyright (c) 1994-1996 by cisco Systems, Inc. -- All rights reserved. -- -- ***************************************************************** -- -- This MIB is virtually identical to the RIPSAP MIB distributed as a part -- of the Novell NetWare Link Services Protocol (NLSP) Specification 1.0, -- Novell Part Number 100-001708-002, 2nd Edition Feb '94. All changes -- are syntactic in nature, and do not affect the semantics of the MIB. NOVELL-RIPSAP-MIB DEFINITIONS ::= BEGIN -- This MIB defines the management information for the RIP and SAP -- protocols running in an IPX environment. It provides information in -- addition to that contained in the IPX MIB itself. All tables in this -- MIB are linked to an instance of IPX via the system instance -- identifier as defined in the IPX MIB. IMPORTS Counter FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 mibDoc FROM IPX; ripsap OBJECT IDENTIFIER ::= {mibDoc 20} -- Groups ripsapSystem OBJECT IDENTIFIER ::= {ripsap 1} ripsapCircuit OBJECT IDENTIFIER ::= {ripsap 2} -- System Group -- This group contains global information about each instance of -- RIP/SAP running on one system. -- RIP System Table -- This table contains an entry for each instance of RIP -- running on the system. ripSysTable OBJECT-TYPE SYNTAX SEQUENCE OF RIPSysEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The RIP system table." ::= {ripsapSystem 1} ripSysEntry OBJECT-TYPE SYNTAX RIPSysEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry corresponds to one instance of RIP running on the system." INDEX {ripSysInstance} ::= {ripSysTable 1} RIPSysEntry ::= SEQUENCE { ripSysInstance INTEGER, ripSysState INTEGER, ripSysIncorrectPackets Counter } ripSysInstance OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The unique identifier of the instance of RIP to which this row corresponds. This value links the instance of RIP to an instance of IPX running on the system (i.e. the value of ripSysInstance should be the same as a value of ipxSysInstance). This value may be written only when creating a new entry in the table." ::= {ripSysEntry 1} ripSysState OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the operational state of this instance of RIP." ::= {ripSysEntry 2} ripSysIncorrectPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times that an incorrectly formatted RIP packet was received." ::= {ripSysEntry 3} -- SAP System Table -- This table contains an entry for each instance of SAP -- running on the system. sapSysTable OBJECT-TYPE SYNTAX SEQUENCE OF SAPSysEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The SAP system table." ::= {ripsapSystem 2} sapSysEntry OBJECT-TYPE SYNTAX SAPSysEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry corresponds to one instance of SAP running on the system." INDEX {sapSysInstance} ::= {sapSysTable 1} SAPSysEntry ::= SEQUENCE { sapSysInstance INTEGER, sapSysState INTEGER, sapSysIncorrectPackets Counter } sapSysInstance OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The unique identifier of the instance of SAP to which this row corresponds. This value links the instance of SAP to an instance of IPX running on the system (i.e. the value of SApSysInstance should be the same as a value of ipxSysInstance). This value may be written only when creating a new entry in the table." ::= {sapSysEntry 1} sapSysState OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the operational state of this instance of SAP." ::= {sapSysEntry 2} sapSysIncorrectPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times that an incorrectly formatted SAP packet was received." ::= {sapSysEntry 3} -- Circuit Group -- This group contains RIP and SAP management information for each -- circuit known to this system. -- RIP Circuit Table -- The RIP Circuit table contains an entry for the RIP information for -- each circuit known to the system. ripCircTable OBJECT-TYPE SYNTAX SEQUENCE OF RIPCircEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The RIP Circuit table." ::= {ripsapCircuit 1} ripCircEntry OBJECT-TYPE SYNTAX RIPCircEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry corresponds to one circuit known to the system." INDEX { ripCircSysInstance, ripCircIndex } ::= {ripCircTable 1} RIPCircEntry ::= SEQUENCE { ripCircSysInstance INTEGER, ripCircIndex INTEGER, ripCircState INTEGER, ripCircPace INTEGER, ripCircUpdate INTEGER, ripCircAgeMultiplier INTEGER, ripCircPacketSize INTEGER, ripCircOutPackets Counter, ripCircInPackets Counter } ripCircSysInstance OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The unique identifier of the instance of RIP and IPX (via ipxSysInstance) to which this entry corresponds. This value may be written only when creating a new entry in the table." ::= {ripCircEntry 1} ripCircIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The identifier of this circuit, unique within the instance of RIP. This value corresponds to the circuit identifier found in ipxCircIndex. This value may be written only when creating a new entry in the table." ::= {ripCircEntry 2} ripCircState OBJECT-TYPE SYNTAX INTEGER { off(1), on(2), auto-on(3), auto-off(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether RIP information may be sent/received over this circuit." DEFVAL { auto-off } ::= {ripCircEntry 3} ripCircPace OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum pace, in packets per second, at which RIP packets may be sent on this circuit." ::= {ripCircEntry 4} ripCircUpdate OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The RIP periodic update interval, in seconds." DEFVAL { 60 } ::= {ripCircEntry 5} ripCircAgeMultiplier OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The holding multiplier for information received in RIP periodic updates." DEFVAL { 4 } ::= {ripCircEntry 6} ripCircPacketSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The RIP packet size used on this circuit." ::= {ripCircEntry 7} ripCircOutPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of RIP packets sent on this circuit." ::= {ripCircEntry 8} ripCircInPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of RIP packets received on this circuit." ::= {ripCircEntry 9} -- SAP Circuit Table -- The SAP Circuit table contains an entry for the SAP information for -- each circuit known to the system. sapCircTable OBJECT-TYPE SYNTAX SEQUENCE OF SAPCircEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The SAP Circuit table." ::= {ripsapCircuit 2} sapCircEntry OBJECT-TYPE SYNTAX SAPCircEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry corresponds to one circuit known to the system." INDEX { sapCircSysInstance, sapCircIndex } ::= {sapCircTable 1} SAPCircEntry ::= SEQUENCE { sapCircSysInstance INTEGER, sapCircIndex INTEGER, sapCircState INTEGER, sapCircPace INTEGER, sapCircUpdate INTEGER, sapCircAgeMultiplier INTEGER, sapCircPacketSize INTEGER, sapCircGetNearestServerReply INTEGER, sapCircOutPackets Counter, sapCircInPackets Counter } sapCircSysInstance OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The unique identifier of the instance of SAP and IPX (via ipxSysInstance) to which this entry corresponds. This value may be written only when creating a new entry in the table." ::= {sapCircEntry 1} sapCircIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The identifier of this circuit, unique within the instance of SAP. This value corresponds to the circuit identifier found in ipxCircIndex. This value may be written only when creating a new entry in the table." ::= {sapCircEntry 2} sapCircState OBJECT-TYPE SYNTAX INTEGER { off(1), on(2), auto-on(3), auto-off(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether SAP information may be sent/received over this circuit." DEFVAL { auto-off } ::= {sapCircEntry 3} sapCircPace OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum pace, in packets per second, at which SAP packets may be sent on this circuit." ::= {sapCircEntry 4} sapCircUpdate OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The SAP periodic update interval, in seconds." DEFVAL { 60 } ::= {sapCircEntry 5} sapCircAgeMultiplier OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The holding multiplier for information received in SAP periodic updates." DEFVAL { 4 } ::= {sapCircEntry 6} sapCircPacketSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The SAP packet size used on this circuit." ::= {sapCircEntry 7} sapCircGetNearestServerReply OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether to respond to SAP get nearest server requests received on this circuit." DEFVAL { yes } ::= {sapCircEntry 8} sapCircOutPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of SAP packets sent on this circuit." ::= {sapCircEntry 9} sapCircInPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of SAP packets received on this circuit." ::= {sapCircEntry 10} END -- Modification History -- -- CR Author Date Description -- ==================================================================== -- 131405-1 ADaun 071000 Added vrrpOperCriticalIpAddrEnable -- VRRP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Counter32, Integer32, TimeTicks, IpAddress FROM SNMPv2-SMI -- RFC1442 TEXTUAL-CONVENTION, RowStatus, TruthValue, MacAddress FROM SNMPv2-TC -- RFC1443 MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- RFC1444 mib-2, ifIndex, ipAdEntAddr FROM RFC1213-MIB; vrrp MODULE-IDENTITY LAST-UPDATED "9606040900Z" -- Dummy value ORGANIZATION "IETF VRRP Working Group" CONTACT-INFO "Brian R. Jewell Postal: 3Com Corporation 5400 BayFront Plaza Santa Clara, California 95052 Tel: +1 408 764 6173 E-Mail: bjewell@3com.com" DESCRIPTION "The MIB module to describe the VRRP Version 2 Protocol." ::= { mib-2 46 } vrrpMIB OBJECT IDENTIFIER ::= { vrrp 1 } -- ******************************************************************* -- Textual Conventions -- ******************************************************************* VrId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A number which, along with an interface index (ifIndex), serves to uniquely identify a virtual router on a given VRRP router. A set of one or more associated addresses is assigned to a VRID." SYNTAX Integer32 (1..255) -- ******************************************************************* -- VRRP MIB Groups -- ******************************************************************* vrrpOperations OBJECT IDENTIFIER ::= { vrrpMIB 1 } vrrpStatistics OBJECT IDENTIFIER ::= { vrrpMIB 2 } vrrpNotifications OBJECT IDENTIFIER ::= { vrrpMIB 3 } vrrpConformance OBJECT IDENTIFIER ::= { vrrpMIB 4 } -- ******************************************************************* -- Start of MIB objects -- ******************************************************************* vrrpEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable feature." ::= { vrrpOperations 1 } vrrpNodeVersion OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) MAX-ACCESS read-only STATUS current DESCRIPTION "This value identifies the particular version of the VRRP supported by this node. The current value is '02'." REFERENCE "Virtual Router Redundancy Protocol, RFC XXXX" DEFVAL { '0200'H } ::= { vrrpOperations 2 } vrrpTrapCntl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the VRRP-enabled router will generate SNMP traps for events defined in this MIB. Enabled results in SNMP traps; disabled, no traps are sent." DEFVAL { true } ::= { vrrpOperations 3 } vrrpPingVirtualAddrEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Used to configure whether this device should respond to pings directed to a virtual router's IP address." DEFVAL { true } ::= { vrrpOperations 4 } -- ******************************************************************* -- VRRP Operations Table -- ******************************************************************* vrrpOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrrpOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Operations table for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of 'vrrpOperEntry' items." ::= { vrrpOperations 10 } vrrpOperEntry OBJECT-TYPE SYNTAX VrrpOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vrrpOperTable containing the operational characteristics of a virtual router. On a VRRP router, a given virtual router is identified by a combination of the IF index and VRID." INDEX { vrrpOperIfIndex, vrrpOperVrId } ::= { vrrpOperTable 1 } VrrpOperEntry ::= SEQUENCE { vrrpOperIfIndex INTEGER, vrrpOperVrId VrId, vrrpOperIpAddr IpAddress, vrrpOperVirtualMacAddr MacAddress, vrrpOperState INTEGER, vrrpOperControl INTEGER, vrrpOperPriority Integer32, vrrpOperIpAddrCount Integer32, vrrpOperMasterIpAddr IpAddress, vrrpOperAuthType INTEGER, vrrpOperHMACMD5Key OCTET STRING, vrrpOperAuthKey OCTET STRING, vrrpOperAdvertisementInterval Integer32, vrrpOperPreemptMode INTEGER, vrrpOperVirtualRouterUpTime TimeTicks, vrrpOperRowStatus RowStatus, vrrpOperCriticalIpAddr IpAddress, vrrpOperHoldDownTimer INTEGER, vrrpOperHoldDownState INTEGER, vrrpOperHoldDownTimeRemaining INTEGER, vrrpOperAction INTEGER, vrrpOperCriticalIpAddrEnable TruthValue } vrrpOperIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "port interface index." ::= { vrrpOperEntry 1 } vrrpOperVrId OBJECT-TYPE SYNTAX VrId MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the Virtual Router Identifier (VRID)." ::= { vrrpOperEntry 2 } vrrpOperIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The assigned IP addresses that a virtual router is responsible for backing up." ::= { vrrpOperEntry 3 } vrrpOperVirtualMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The virtual MAC address of the virtual router. This is derived as follows: 00-00-5E-00-01-. Where the first three octets consist of the IANA's OUI; The next two octets indicate the address block of the VRRP protocol; and the remaining octets consist of the VRID. Although this object can be derived from the 'vrrpOperVrId' object, it is included here, for completeness, so that it is easily obtainable by a management application and can be included in VRRP-related SNMP traps." REFERENCE "rfc1903 - MacAddress" ::= { vrrpOperEntry 4 } vrrpOperState OBJECT-TYPE SYNTAX INTEGER { initialize(1), -- Waiting for a startup event backup(2), -- Monitoring the state/availability of -- master router master(3) -- Forwarding IP addresses associated with -- this virtual router. } MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the virtual router." ::= { vrrpOperEntry 5 } vrrpOperControl OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object will enable/disable the virtual router function. Setting the value to 'enabled', will transition the state of the router from 'initialize to 'backup'; Setting the value to 'disabled', will tranisition the router from 'master' or 'backup' to 'initialize'." DEFVAL { enabled } ::= { vrrpOperEntry 6 } vrrpOperPriority OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the priority for the virtual router (e.g., master election) with respect to other virtual routers that are backing up a one or more associated IP addresses. Higher values imply higher priority. A priority of '0', although not settable, is used to indicate that this router has ceased to particpate in VRRP and a backup virtual router should transition \ to become a new master. A priority of 255 is used for the router that owns the associated IP address(es)." DEFVAL { 100 } ::= { vrrpOperEntry 7 } vrrpOperIpAddrCount OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IP addresses that are associated with this virtual router. This number is equal to the number of rows in the vrrpAssoIpAddrTable that correspond to a given IF index/VRID pair." ::= { vrrpOperEntry 8 } vrrpOperMasterIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The master router's real (primary) IP address. This is the IP address listed as the source in VRRP advertisement last received by this virtual router" ::= { vrrpOperEntry 9 } vrrpOperAuthType OBJECT-TYPE SYNTAX INTEGER { noAuthentication(1), -- VRRP protocol exchanges are not -- authenticated. simpleTextPassword(2), -- Exchanges are authenticated by a -- clear text password. ipAuthenticationHeader(3) -- Exchanges are authenticated using -- the IP authentication header [x]. } MAX-ACCESS read-write STATUS current DESCRIPTION "Authentication type used for VRRP protocol exchanges between virtual routers." DEFVAL { noAuthentication } ::= { vrrpOperEntry 10 } vrrpOperAuthKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8)) MAX-ACCESS read-write STATUS current DESCRIPTION "The Authentication Key. If the virtual router's Authorization Type is 'simpleTextPassword', and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. When read, vrrpOperAuthKey always returns an Octet String of length zero." DEFVAL { '0000000000000000'H } -- 0.0.0.0.0.0.0.0 ::= { vrrpOperEntry 11 } vrrpOperHMACMD5Key OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS read-write STATUS current DESCRIPTION "The Authentication Key. If the virtual router's 'Authorization Type' is 'ipAuthenticationHeader', and the key length is shorter than 16 octets, the agent will left adjust and zero fill to 16 octets. When read, vrrpOperHMACMD5Key always returns an Octet String of length zero." DEFVAL { '00000000000000000000000000000000'H } -- 0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0 ::= { vrrpOperEntry 12 } vrrpOperAdvertisementInterval OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the time interval, in seconds, between sending advertisement messages. Only the master router sends VRRP advertisements." DEFVAL { 1 } ::= { vrrpOperEntry 13 } vrrpOperPreemptMode OBJECT-TYPE SYNTAX INTEGER { true(1), -- Preempt false(2) -- Do not preempt } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls whether a higher priority virtual router will preempt a lower priority master." DEFVAL { true } ::= { vrrpOperEntry 14 } vrrpOperVirtualRouterUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "This is the time interval (in hundredths of a second) since this virtual router was initialized." ::= { vrrpOperEntry 15 } vrrpOperRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to 'createAndGo' results in enabling the VRRP protocol for this virtual router. The information required to actually create the conceptual row may be included in the SET primitive or may be initialized by the agent on the virtual router. Destroying the entry or setting it to 'notInService' disables VRRP on this virtual router." ::= { vrrpOperEntry 16 } vrrpOperCriticalIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of the interface that will cause a shutdown event." ::= { vrrpOperEntry 17 } vrrpOperHoldDownTimer OBJECT-TYPE SYNTAX INTEGER (0..21600) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to configure the amount of time (in seconds) to wait before preempting the current vrrp master." ::= { vrrpOperEntry 18 } vrrpOperHoldDownState OBJECT-TYPE SYNTAX INTEGER { dormant(1), active(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Used to indicate the hold-down state of this vrrp interface. If the hold-down timer is operational this variable will be set to 'active'. 'dormant' otherwise." ::= { vrrpOperEntry 19 } vrrpOperHoldDownTimeRemaining OBJECT-TYPE SYNTAX INTEGER (0..21600) MAX-ACCESS read-only STATUS current DESCRIPTION "Used to indicate the amount of time (in seconds) left before the vrrpOperHoldDownTimer will expire." ::= { vrrpOperEntry 20 } vrrpOperAction OBJECT-TYPE SYNTAX INTEGER { none(1), preemptHoldDownTimer(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Used to trigger an action on this vrrp interface." ::= { vrrpOperEntry 21 } vrrpOperCriticalIpAddrEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicate if an user-defined critical IP address should be enabled. 'NO' = use the default IP address (0.0.0.0). No effect if an user-defined IP address does not exist." DEFVAL { false } ::= { vrrpOperEntry 22 } -- ******************************************************************* -- VRRP Associated IP Address Table -- ******************************************************************* vrrpAssoIpAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF VrrpAssoIpAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of addresses associated with this virtual router." ::= { vrrpOperations 11 } vrrpAssoIpAddrEntry OBJECT-TYPE SYNTAX VrrpAssoIpAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table contains an IP address that is associated with a virtual router. The number of rows for a given IF Index and VRID will equal the number of IP addresses associated (e.g., backed up by the virtual router)." INDEX { vrrpAssoIpAddrIfIndex, vrrpAssoIpAddrVrId, vrrpAssoIpAddr } ::= { vrrpAssoIpAddrTable 1 } VrrpAssoIpAddrEntry ::= SEQUENCE { vrrpAssoIpAddrIfIndex INTEGER, vrrpAssoIpAddrVrId VrId, vrrpAssoIpAddr IpAddress, vrrpAssoIpAddrRowStatus RowStatus } vrrpAssoIpAddrIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "port interface index." ::= { vrrpAssoIpAddrEntry 1 } vrrpAssoIpAddrVrId OBJECT-TYPE SYNTAX VrId MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the Virtual Router Identifier (VRID)." ::= { vrrpAssoIpAddrEntry 2 } vrrpAssoIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The assigned IP addresses that a virtual router is responsible for backing up." ::= { vrrpAssoIpAddrEntry 3 } vrrpAssoIpAddrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to 'createAndGo' results in the addition of an associated address for a virtual router. The information required to actually create the conceptual may be included in the SET primitive or may be initialized by the agent on the VRRP router. Destroying the entry or setting it to 'notInService' removes the associated address from the virtual router." ::= { vrrpAssoIpAddrEntry 4 } -- ******************************************************************* -- VRRP Router Statistics Table -- ******************************************************************* vrrpRouterStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VrrpRouterStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of virtual router statistics." ::= { vrrpStatistics 1 } vrrpRouterStatsEntry OBJECT-TYPE SYNTAX VrrpRouterStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing statistics information about a given virtual router." INDEX { vrrpStatsIfIndex, vrrpStatsVrId } ::= { vrrpRouterStatsTable 1 } VrrpRouterStatsEntry ::= SEQUENCE { vrrpStatsIfIndex INTEGER, vrrpStatsVrId VrId, vrrpStatsBecomeMaster Counter32, vrrpStatsAdvertiseRcvd Counter32, vrrpStatsChecksumErrors Counter32, vrrpStatsVersionErrors Counter32, vrrpStatsVrIdErrors Counter32, vrrpStatsAdvertiseIntervalErrors Counter32, vrrpStatsPasswdSecurityViolations Counter32, vrrpStatsHmacSecurityViolations Counter32, vrrpStatsIpTtlErrors Counter32, vrrpStatsPriorityZeroPktsRcvd Counter32, vrrpStatsPriorityZeroPktsSent Counter32, vrrpStatsInvalidTypePktsRcvd Counter32, vrrpStatsAddressListErrors Counter32, vrrpStatsUnknownAuthType Counter32, vrrpStatsAuthTypeErrors Counter32 } vrrpStatsIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "port interface index." ::= { vrrpRouterStatsEntry 1 } vrrpStatsVrId OBJECT-TYPE SYNTAX VrId MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the Virtual Router Identifier (VRID)." ::= { vrrpRouterStatsEntry 2 } vrrpStatsBecomeMaster OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of times that this virtual router's state has transitioned from BACKUP to MASTER." ::= { vrrpRouterStatsEntry 3 } vrrpStatsAdvertiseRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP advertisements received by this virtual router." ::= { vrrpRouterStatsEntry 4 } vrrpStatsChecksumErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP packets received with an invalid checksum value." ::= { vrrpRouterStatsEntry 5 } vrrpStatsVersionErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP packets received with an invalid version number." ::= { vrrpRouterStatsEntry 6 } vrrpStatsVrIdErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP packets received with an invalid VRID for this virtual router." ::= { vrrpRouterStatsEntry 7 } vrrpStatsAdvertiseIntervalErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP advertisement packets received for which the advertisement interval is different than the one configured for the local virtual router." ::= { vrrpRouterStatsEntry 8 } vrrpStatsPasswdSecurityViolations OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP packets received that do not pass the simple text password authentification check." ::= { vrrpRouterStatsEntry 9 } vrrpStatsHmacSecurityViolations OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP packets received that do not pass the HMAC-MD5-96 authentification check." ::= { vrrpRouterStatsEntry 10 } vrrpStatsIpTtlErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP packets received by the virtual router with IP TTL (Time-To-Live) not equal to 255." ::= { vrrpRouterStatsEntry 11 } vrrpStatsPriorityZeroPktsRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP packets received by the virtual router with a priority of '0'." ::= { vrrpRouterStatsEntry 12 } vrrpStatsPriorityZeroPktsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP packets sent by the virtual router with a priority of '0'." ::= { vrrpRouterStatsEntry 13 } vrrpStatsInvalidTypePktsRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of VRRP packets received by the virtual router with an invalid value in the 'type' field." ::= { vrrpRouterStatsEntry 14 } vrrpStatsAddressListErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets received address list the address list does not match the locally configured list for the virtual router." ::= { vrrpRouterStatsEntry 15 } vrrpStatsUnknownAuthType OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets received with an unknown authentication type." ::= { vrrpRouterStatsEntry 16 } vrrpStatsAuthTypeErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets received with 'Auth Type' not equal to the locally configured authentication method ('vrrpOperAuthType')." ::= { vrrpRouterStatsEntry 17 } -- ******************************************************************* -- Trap Definitions -- ******************************************************************* vrrpTraps OBJECT IDENTIFIER ::= { vrrpNotifications 0 } vrrpTrapPacketSrc OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of an inbound VRRP packet. Used by vrrpTrapAuthFailure trap." ::= { vrrpOperations 12 } vrrpTrapConfigErrorType OBJECT-TYPE SYNTAX INTEGER { authTypeMismatch (1), authFailure (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Potential types of configuration conflicts. Used by vrrpAuthFailure trap." ::= { vrrpOperations 13 } vrrpTrapStateTransitionType OBJECT-TYPE SYNTAX INTEGER { none(1), masterToBackup(2), backupToMaster(3), initializeToMaster(4), masterToInitialize(5), initializeToBackup(6), backupToInitialize(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Potential types of state transitions. Used by vrrpTrapStateTransition trap." ::= { vrrpOperations 14 } vrrpTrapStateTransitionCause OBJECT-TYPE SYNTAX INTEGER { none(1), higherPriorityAdvertizeReceived(2), shutdownReceived(3), vrrpAddrAndPhysicalAddrMatch(4), masterDownInterval(5), preempted(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Potential types of causes that will generate a vrrpTrapStateTransition trap." ::= { vrrpOperations 15 } vrrpTrapNewMaster NOTIFICATION-TYPE OBJECTS { ifIndex, vrrpOperVrId, vrrpOperVirtualMacAddr } STATUS current DESCRIPTION "The newMaster trap indicates that the sending agent has transitioned from 'Backup' state to 'Master' state." ::= { vrrpTraps 1 } vrrpTrapAuthFailure NOTIFICATION-TYPE OBJECTS { ifIndex, vrrpOperVrId, vrrpTrapPacketSrc, vrrpTrapConfigErrorType } STATUS current DESCRIPTION "A vrrpAuthFailure trap signifies that a packet has been received from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type. Implementation of this trap is optional." ::= { vrrpTraps 2 } vrrpTrapStateTransition NOTIFICATION-TYPE OBJECTS { ifIndex, vrrpTrapStateTransitionType, vrrpTrapStateTransitionCause, vrrpOperVrId, vrrpOperIpAddr, ipAdEntAddr } STATUS current DESCRIPTION "A vrrpTrapStateTransition trap signifies a state transition has occurred on a particular vrrp interface. Implementation of this trap is optional. 'vrrpOperIpAddr' contains the IP address of the vrrp interface while 'ipAdEntAddr' contains the IP address assigned to physical interface." ::= { vrrpTraps 3 } -- ******************************************************************* -- Conformance Information -- ******************************************************************* vrrpMIBCompliances OBJECT IDENTIFIER ::= { vrrpConformance 1 } vrrpMIBGroups OBJECT IDENTIFIER ::= { vrrpConformance 2 } -- ................................................................... -- Compliance Statements -- ................................................................... vrrpMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The core compliance statement for all VRRP implementations." MODULE -- this module MANDATORY-GROUPS { vrrpOperGroup , vrrpStatsGroup } ::= { vrrpMIBCompliances 1 } -- ................................................................... -- Conformance Groups -- ................................................................... vrrpOperGroup OBJECT-GROUP OBJECTS { vrrpNodeVersion, vrrpTrapCntl, vrrpOperVrId, vrrpOperVirtualMacAddr, vrrpOperState, vrrpOperControl, vrrpOperPriority, vrrpOperIpAddrCount, vrrpOperMasterIpAddr, vrrpOperAuthType, vrrpOperHMACMD5Key, vrrpOperAuthKey, vrrpOperAdvertisementInterval, vrrpOperPreemptMode, vrrpOperVirtualRouterUpTime, vrrpOperRowStatus, vrrpTrapPacketSrc, vrrpTrapConfigErrorType, vrrpAssoIpAddr, vrrpAssoIpAddrRowStatus } STATUS current DESCRIPTION "Conformance group for VRRP operations." ::= { vrrpMIBGroups 1 } vrrpStatsGroup OBJECT-GROUP OBJECTS { vrrpStatsBecomeMaster, vrrpStatsAdvertiseRcvd, vrrpStatsChecksumErrors, vrrpStatsVersionErrors, vrrpStatsVrIdErrors, vrrpStatsAdvertiseIntervalErrors, vrrpStatsPasswdSecurityViolations, vrrpStatsHmacSecurityViolations, vrrpStatsIpTtlErrors, vrrpStatsPriorityZeroPktsRcvd, vrrpStatsPriorityZeroPktsSent, vrrpStatsInvalidTypePktsRcvd, vrrpStatsAddressListErrors, vrrpStatsUnknownAuthType, vrrpStatsAuthTypeErrors } STATUS current DESCRIPTION "Conformance group for VRRP statistics." ::= { vrrpMIBGroups 2 } END -- -- Distance-Vector Multicast Routing Protocol MIB -- -- DVMRP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, experimental, Integer32, Counter32, Gauge32, NOTIFICATION-TYPE, IpAddress, TimeTicks FROM SNMPv2-SMI DisplayString, RowStatus FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF; dvmrpMIB MODULE-IDENTITY LAST-UPDATED "9804221900Z" ORGANIZATION "IETF IDMR Working Group." CONTACT-INFO " Dave Thaler Microsoft One Microsoft Way Redmond, WA 98052-6399 EMail: dthalerd@microsoft.com" DESCRIPTION "The MIB module for management of DVMRP routers." ::= { experimental 62 } dvmrpMIBObjects OBJECT IDENTIFIER ::= { dvmrpMIB 1 } dvmrp OBJECT IDENTIFIER ::= { dvmrpMIBObjects 1 } dvmrpVersionString OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The router's DVMRP version information." ::= { dvmrp 1 } dvmrpGenerationId OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The generation identifier for the routing process. This is used by neighboring routers to detect whether the DVMRP routing table should be resent." ::= { dvmrp 2 } dvmrpNumRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of entries in the routing table. This can be used to monitor the routing table size to detect illegal advertisements of unicast routes." ::= { dvmrp 9 } dvmrpReachableRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of entries in the routing table with non infinite metrics. This can be used to detect network partitions by observing the ratio of reachable routes to total routes." ::= { dvmrp 10 } -- The DVMRP Interface Table dvmrpInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF DvmrpInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the router's multicast- capable interfaces." ::= { dvmrp 3 } dvmrpInterfaceEntry OBJECT-TYPE SYNTAX DvmrpInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the dvmrpInterfaceTable. This row augments ipMRouteInterfaceEntry in the IP Multicast MIB, where the threshold object resides." INDEX { dvmrpInterfaceIfIndex } ::= { dvmrpInterfaceTable 1 } DvmrpInterfaceEntry ::= SEQUENCE { dvmrpInterfaceIfIndex Integer32, dvmrpInterfaceType INTEGER, -- deprecated dvmrpInterfaceOperState INTEGER, dvmrpInterfaceLocalAddress IpAddress, dvmrpInterfaceRemoteAddress IpAddress, -- deprecated dvmrpInterfaceRemoteSubnetMask IpAddress, -- deprecated dvmrpInterfaceMetric Integer32, dvmrpInterfaceRateLimit Integer32, -- deprecated dvmrpInterfaceInPkts Counter32, -- deprecated dvmrpInterfaceOutPkts Counter32, -- deprecated dvmrpInterfaceInOctets Counter32, -- deprecated dvmrpInterfaceOutOctets Counter32, -- deprecated dvmrpInterfaceStatus RowStatus, dvmrpInterfaceRcvBadPkts Counter32, -- excluded dvmrpInterfaceRcvBadRoutes Counter32, -- excluded dvmrpInterfaceSentRoutes Counter32, -- excluded dvmrpInterfaceMasterKey DisplayString, -- excluded dvmrpInterfaceMasterKeyVersion Integer32 -- excluded } dvmrpInterfaceIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex value of the interface for which DVMRP is enabled." ::= { dvmrpInterfaceEntry 1 } dvmrpInterfaceType OBJECT-TYPE SYNTAX INTEGER { tunnel(1), srcrt(2), querier(3), subnet(4) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The type of this DVMRP interface, whether it uses a tunnel, source routing, a physical interface for which we are a querier, or a physical interface for which we are not a querier. This object is deprecated in favor of ifType." DEFVAL { tunnel } ::= { dvmrpInterfaceEntry 2 } dvmrpInterfaceOperState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of this DVMRP interface. This object is deprecated in favor of ifOperStatus." ::= { dvmrpInterfaceEntry 3 } dvmrpInterfaceLocalAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address this system will use as a source address on this interface. On unnumbered interfaces, it must be the same value as dvmrpInterfaceLocalAddress for some interface on the system." ::= { dvmrpInterfaceEntry 4 } dvmrpInterfaceRemoteAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The IP address of the remote end of this DVMRP virtual interface. For a tunnel (including source routed), this is the IP address of the neighboring router. For a subnet, this is the subnet address. This object is deprecated in favor of address information associated with the underlying ifEntry." ::= { dvmrpInterfaceEntry 5 } dvmrpInterfaceRemoteSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The subnet mask for a directly connected subnet. For a tunnel, this should be 0.0.0.0. This object is deprecated in favor of address information associated with the underlying ifEntry." ::= { dvmrpInterfaceEntry 6 } dvmrpInterfaceMetric OBJECT-TYPE SYNTAX Integer32 (1..31) MAX-ACCESS read-write STATUS current DESCRIPTION "The distance metric for this interface which is used to calculate distance vectors." DEFVAL { 1 } ::= { dvmrpInterfaceEntry 7 } dvmrpInterfaceRateLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The rate-limit, in kilobits per second, of forwarded multicast traffic on the interface. A rate-limit of 0 indicates that no rate limiting is done. This object has been moved to the IP Multicast MIB." DEFVAL { 0 } ::= { dvmrpInterfaceEntry 8 } dvmrpInterfaceInPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of multicast packets that have arrived on the interface. This object is deprecated in favor of ifInMulticastPkts in the Interfaces MIB [8]." ::= { dvmrpInterfaceEntry 9 } dvmrpInterfaceOutPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of multicast packets that have been sent on the interface. This object is deprecated in favor of ifOutMulticastPkts in the Interfaces MIB [8]." ::= { dvmrpInterfaceEntry 10 } dvmrpInterfaceInOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of octets in multicast packets that have arrived on the interface. This object has been moved to the IP Multicast MIB." ::= { dvmrpInterfaceEntry 11 } dvmrpInterfaceOutOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of octets in multicast packets that have been sent on the interface. This object has been moved to the IP Multicast MIB." ::= { dvmrpInterfaceEntry 12 } dvmrpInterfaceStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this entry. Creating the entry enables DVMRP on the virtual interface; destroying the entry or setting it to notInService disables DVMRP on the virtual interface." ::= { dvmrpInterfaceEntry 13 } dvmrpInterfaceRcvBadPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DVMRP packets received on the interface by the DVMRP process which were subsequently discarded as invalid (e.g. invalid packet format, or a route report from an unknown neighbor)." ::= { dvmrpInterfaceEntry 14 } dvmrpInterfaceRcvBadRoutes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of routes, in valid DVMRP packets, which were ignored because the entry was invalid." ::= { dvmrpInterfaceEntry 15 } dvmrpInterfaceSentRoutes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of routes, in DVMRP Report packets, which have been sent on this interface. Together with dvmrpNeighborRcvRoutes at a peer, this object is useful for detecting routes being lost." ::= { dvmrpInterfaceEntry 16 } dvmrpInterfaceMasterKey OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "The master (shared) key for authenticating neighbors on this interface. This object is intended solely for the purpose of setting the master key, and MUST be accessible only via requests using both authentication and privacy. The agent MAY report an empty string in response to get, get-next, get-bulk requests." ::= { dvmrpInterfaceEntry 17 } dvmrpInterfaceMasterKeyVersion OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The highest version number of all known master keys used for authenticating neighbors on this interface." ::= { dvmrpInterfaceEntry 18 } -- The DVMRP Neighbor Table dvmrpNeighborTable OBJECT-TYPE SYNTAX SEQUENCE OF DvmrpNeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the router's DVMRP neighbors, as discovered by receiving DVMRP messages." ::= { dvmrp 4 } dvmrpNeighborEntry OBJECT-TYPE SYNTAX DvmrpNeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the dvmrpNeighborTable." INDEX { dvmrpNeighborIfIndex, dvmrpNeighborAddress } ::= { dvmrpNeighborTable 1 } DvmrpNeighborEntry ::= SEQUENCE { dvmrpNeighborIfIndex Integer32, dvmrpNeighborAddress IpAddress, dvmrpNeighborUpTime TimeTicks, dvmrpNeighborExpiryTime TimeTicks, dvmrpNeighborGenerationId Counter32, dvmrpNeighborMajorVersion Integer32, dvmrpNeighborMinorVersion Integer32, dvmrpNeighborCapabilities INTEGER, dvmrpNeighborRcvRoutes Counter32, dvmrpNeighborRcvBadPkts Counter32, dvmrpNeighborRcvBadRoutes Counter32, dvmrpNeighborState INTEGER } dvmrpNeighborIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ifIndex for the virtual interface used to reach this DVMRP neighbor." ::= { dvmrpNeighborEntry 1 } dvmrpNeighborAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the DVMRP neighbor for which this entry contains information." ::= { dvmrpNeighborEntry 2 } dvmrpNeighborUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since this DVMRP neighbor (last) became a neighbor of the local router." ::= { dvmrpNeighborEntry 3 } dvmrpNeighborExpiryTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum time remaining before this DVMRP neighbor will be aged out." ::= { dvmrpNeighborEntry 4 } dvmrpNeighborGenerationId OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The neighboring router's generation identifier." ::= { dvmrpNeighborEntry 6 } dvmrpNeighborMajorVersion OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The neighboring router's major DVMRP version number." ::= { dvmrpNeighborEntry 7 } dvmrpNeighborMinorVersion OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The neighboring router's minor DVMRP version number." ::= { dvmrpNeighborEntry 8 } dvmrpNeighborCapabilities OBJECT-TYPE SYNTAX INTEGER { leaf(1), prune(2), generationID(4), mtrace(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes the neighboring router's capabilities. The leaf bit indicates that the neighbor has only one interface with neighbors. The prune bit indicates that the neighbor supports pruning. The generationID bit indicates that the neighbor sends its generationID in Probe messages. The mtrace bit indicates that the neighbor can handle mtrace requests." ::= { dvmrpNeighborEntry 9 } dvmrpNeighborRcvRoutes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of routes received in valid DVMRP packets received from this neighbor. This can be used to diagnose problems such as unicast route injection, as well as giving an indication of the level of DVMRP route exchange activity." ::= { dvmrpNeighborEntry 10 } dvmrpNeighborRcvBadPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packet received from this neighbor which were discarded as invalid." ::= { dvmrpNeighborEntry 11 } dvmrpNeighborRcvBadRoutes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of routes, in valid DVMRP packets received from this neighbor, which were ignored because the entry was invalid." ::= { dvmrpNeighborEntry 12 } dvmrpNeighborState OBJECT-TYPE SYNTAX INTEGER { oneway(1), active(2), ignoring(3), down(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of the neighbor adjacency." ::= { dvmrpNeighborEntry 13 } -- The DVMRP Route Table dvmrpRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF DvmrpRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of routes learned through DVMRP route exchange." ::= { dvmrp 5 } dvmrpRouteEntry OBJECT-TYPE SYNTAX DvmrpRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) containing the multicast routing information used by DVMRP in place of the unicast routing information." INDEX { dvmrpRouteSource, dvmrpRouteSourceMask } ::= { dvmrpRouteTable 1 } DvmrpRouteEntry ::= SEQUENCE { dvmrpRouteSource IpAddress, dvmrpRouteSourceMask IpAddress, dvmrpRouteUpstreamNeighbor IpAddress, dvmrpRouteIfIndex Integer32, dvmrpRouteMetric Integer32, dvmrpRouteExpiryTime TimeTicks, dvmrpRouteUpTime TimeTicks } dvmrpRouteSource OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The network address which when combined with the corresponding value of dvmrpRouteSourceMask identifies the sources for which this entry contains multicast routing information." ::= { dvmrpRouteEntry 1 } dvmrpRouteSourceMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The network mask which when combined with the corresponding value of dvmrpRouteSource identifies the sources for which this entry contains multicast routing information." ::= { dvmrpRouteEntry 2 } dvmrpRouteUpstreamNeighbor OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the upstream neighbor (e.g., RPF neighbor) from which IP datagrams from these sources are received." ::= { dvmrpRouteEntry 3 } dvmrpRouteIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ifIndex for the interface on which IP datagrams sent by these sources are received." ::= { dvmrpRouteEntry 4 } dvmrpRouteMetric OBJECT-TYPE SYNTAX Integer32 (1..31) MAX-ACCESS read-only STATUS current DESCRIPTION "The distance in hops to the source subnet." ::= { dvmrpRouteEntry 5 } dvmrpRouteExpiryTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum amount of time remaining before this entry will be aged out." ::= { dvmrpRouteEntry 6 } dvmrpRouteUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since the route represented by this entry was learned by the router." ::= { dvmrpRouteEntry 7 } -- The DVMRP Routing Next Hop Table dvmrpRouteNextHopTable OBJECT-TYPE SYNTAX SEQUENCE OF DvmrpRouteNextHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing information on the next hops on outgoing interfaces for routing IP multicast datagrams." ::= { dvmrp 6 } dvmrpRouteNextHopEntry OBJECT-TYPE SYNTAX DvmrpRouteNextHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the list of next hops on outgoing interfaces to which IP multicast datagrams from particular sources are routed." INDEX { dvmrpRouteNextHopSource, dvmrpRouteNextHopSourceMask, dvmrpRouteNextHopIfIndex } ::= { dvmrpRouteNextHopTable 1 } DvmrpRouteNextHopEntry ::= SEQUENCE { dvmrpRouteNextHopSource IpAddress, dvmrpRouteNextHopSourceMask IpAddress, dvmrpRouteNextHopIfIndex Integer32, dvmrpRouteNextHopType INTEGER } dvmrpRouteNextHopSource OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The network address which when combined with the corresponding value of dvmrpRouteNextHopSourceMask identifies the sources for which this entry specifies a next hop on an outgoing interface." ::= { dvmrpRouteNextHopEntry 1 } dvmrpRouteNextHopSourceMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The network mask which when combined with the corresponding value of dvmrpRouteNextHopSource identifies the sources for which this entry specifies a next hop on an outgoing interface." ::= { dvmrpRouteNextHopEntry 2 } dvmrpRouteNextHopIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex value of the interface for the outgoing interface for this next hop." ::= { dvmrpRouteNextHopEntry 3 } dvmrpRouteNextHopType OBJECT-TYPE SYNTAX INTEGER { leaf(1), branch(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type is leaf if no downstream dependent neighbors exist on the outgoing virtual interface. Otherwise, type is branch." ::= { dvmrpRouteNextHopEntry 4 } -- The DVMRP Alternate Subnet Table dvmrpAltNetTable OBJECT-TYPE SYNTAX SEQUENCE OF DvmrpAltNetEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The (conceptual) table listing the router's alternate subnets on physical interfaces for use in constructing the routing tables." ::= { dvmrp 8 } dvmrpAltNetEntry OBJECT-TYPE SYNTAX DvmrpAltNetEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "An entry (conceptual row) in the dvmrpAltNetTable." INDEX { dvmrpAltNetIfIndex, dvmrpAltNetAddress, dvmrpAltNetMask } ::= { dvmrpAltNetTable 1 } DvmrpAltNetEntry ::= SEQUENCE { dvmrpAltNetIfIndex Integer32, -- deprecated dvmrpAltNetAddress IpAddress, -- deprecated dvmrpAltNetMask IpAddress, -- deprecated dvmrpAltNetStatus RowStatus -- deprecated } dvmrpAltNetIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The ifIndex value of the interface to which this alternate subnet applies." ::= { dvmrpAltNetEntry 1 } dvmrpAltNetAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The subnet address of the alternate subnet." ::= { dvmrpAltNetEntry 2 } dvmrpAltNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The subnet mask of the alternate subnet." ::= { dvmrpAltNetEntry 3 } dvmrpAltNetStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The status of this row, by which new entries may be created, or old entries deleted from this table." ::= { dvmrpAltNetEntry 4 } -- DVMRP Traps dvmrpTraps OBJECT IDENTIFIER ::= { dvmrp 11 } dvmrpNeighborLoss NOTIFICATION-TYPE OBJECTS { dvmrpInterfaceLocalAddress, -- The originator of the trap dvmrpNeighborIfIndex, dvmrpNeighborAddress, dvmrpNeighborState -- The new state } STATUS current DESCRIPTION "A dvmrpNeighborLoss trap signifies the loss of a 2-way adjacency with a neighbor. This trap should be generated when the neighbor state changes from active to one-way, ignoring, or down. The trap should be generated only if the router has no other neighbors on the same interface with a lower IP address than itself." ::= { dvmrpTraps 1 } dvmrpNeighborNotPruning NOTIFICATION-TYPE OBJECTS { dvmrpInterfaceLocalAddress, -- The originator of the trap dvmrpNeighborIfIndex, dvmrpNeighborAddress } STATUS current DESCRIPTION "A dvmrpNeighborNotPruning trap signifies that a non-pruning neighbor has been detected. This trap should be generated at most once per generation ID of the neighbor. For example, it may be generated at the time a neighbor is first heard from if the prune bit is not set in its capabilities. The trap should be generated only if the router has no other neighbors on the same interface with a lower IP address than itself." ::= { dvmrpTraps 2 } -- conformance information dvmrpMIBConformance OBJECT IDENTIFIER ::= { dvmrpMIB 2 } dvmrpMIBCompliances OBJECT IDENTIFIER ::= { dvmrpMIBConformance 1 } dvmrpMIBGroups OBJECT IDENTIFIER ::= { dvmrpMIBConformance 2 } -- compliance statements dvmrpMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the DVMRP MIB." MODULE -- this module MANDATORY-GROUPS { dvmrpGeneralGroup, dvmrpInterfaceGroup, dvmrpNeighborGroup, dvmrpRoutingGroup } GROUP dvmrpSecurityGroup DESCRIPTION "This group is mandatory for agents which support both authentication and privacy of SNMP messages, and only for those network interfaces for which DVMRP is authenticating neighbors." ::= { dvmrpMIBCompliances 1 } -- units of conformance dvmrpMIBGroup OBJECT-GROUP OBJECTS { dvmrpVersionString, dvmrpGenerationId, dvmrpNumRoutes, dvmrpReachableRoutes, dvmrpInterfaceType, dvmrpInterfaceOperState, dvmrpInterfaceLocalAddress, dvmrpInterfaceRemoteAddress, dvmrpInterfaceRemoteSubnetMask, dvmrpInterfaceMetric, dvmrpInterfaceRateLimit, dvmrpInterfaceInPkts, dvmrpInterfaceOutPkts, dvmrpInterfaceInOctets, dvmrpInterfaceOutOctets, dvmrpInterfaceStatus, dvmrpNeighborUpTime, dvmrpNeighborExpiryTime, dvmrpNeighborGenerationId, dvmrpNeighborMajorVersion, dvmrpNeighborMinorVersion, dvmrpNeighborCapabilities, dvmrpRouteUpstreamNeighbor, dvmrpRouteIfIndex, dvmrpRouteMetric, dvmrpRouteExpiryTime, dvmrpRouteNextHopType, dvmrpAltNetStatus } STATUS deprecated DESCRIPTION "A collection of objects to support management of DVMRP routers." ::= { dvmrpMIBGroups 1 } dvmrpGeneralGroup OBJECT-GROUP OBJECTS { dvmrpVersionString, dvmrpGenerationId, dvmrpNumRoutes, dvmrpReachableRoutes } STATUS current DESCRIPTION "A collection of objects used to describe general DVMRP configuration information." ::= { dvmrpMIBGroups 2 } dvmrpInterfaceGroup OBJECT-GROUP OBJECTS { dvmrpInterfaceLocalAddress, dvmrpInterfaceMetric, dvmrpInterfaceStatus, dvmrpInterfaceRcvBadPkts, dvmrpInterfaceRcvBadRoutes, dvmrpInterfaceSentRoutes } STATUS current DESCRIPTION "A collection of objects used to describe DVMRP interface configuration and statistics." ::= { dvmrpMIBGroups 3 } dvmrpNeighborGroup OBJECT-GROUP OBJECTS { dvmrpNeighborUpTime, dvmrpNeighborExpiryTime, dvmrpNeighborGenerationId, dvmrpNeighborMajorVersion, dvmrpNeighborMinorVersion, dvmrpNeighborCapabilities, dvmrpNeighborRcvRoutes, dvmrpNeighborRcvBadPkts, dvmrpNeighborRcvBadRoutes, dvmrpNeighborState } STATUS current DESCRIPTION "A collection of objects used to describe DVMRP peer configuration and statistics." ::= { dvmrpMIBGroups 4 } dvmrpRoutingGroup OBJECT-GROUP OBJECTS { dvmrpRouteUpstreamNeighbor, dvmrpRouteIfIndex, dvmrpRouteMetric, dvmrpRouteExpiryTime, dvmrpRouteUpTime, dvmrpRouteNextHopType } STATUS current DESCRIPTION "A collection of objects used to store the DVMRP routing table." ::= { dvmrpMIBGroups 5 } dvmrpSecurityGroup OBJECT-GROUP OBJECTS { dvmrpInterfaceMasterKey, dvmrpInterfaceMasterKeyVersion } STATUS current DESCRIPTION "A collection of objects used to store information related to DVMRP security." ::= { dvmrpMIBGroups 6 } END -- -- IP Multicast Routing MIB -- -- IPMROUTE-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, experimental, Integer32, Counter32, Counter64, IpAddress, TimeTicks FROM SNMPv2-SMI RowStatus FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF; ipMRouteMIB MODULE-IDENTITY LAST-UPDATED "9711201700Z" ORGANIZATION "IETF IDMR Working Group." CONTACT-INFO " Keith McCloghrie Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 US Phone: +1 408 526 5260 EMail: kzm@cisco.com" DESCRIPTION "The MIB module for management of IP Multicast routing, but independent of the specific multicast routing protocol in use." ::= { experimental 60 } ipMRouteMIBObjects OBJECT IDENTIFIER ::= { ipMRouteMIB 1 } ipMRoute OBJECT IDENTIFIER ::= { ipMRouteMIBObjects 1 } -- the IP Multicast Routing MIB-Group -- -- a collection of objects providing information about -- IP Multicast Groups ipMRouteEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The enabled status of IP Multicast routing on this router." ::= { ipMRoute 1 } ipMRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF IpMRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing multicast routing information for IP datagrams sent by particular sources to the IP multicast groups known to this router." ::= { ipMRoute 2 } ipMRouteEntry OBJECT-TYPE SYNTAX IpMRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) containing the multicast routing information for IP datagrams from a particular source and addressed to a particular IP multicast group address." INDEX { ipMRouteGroup, ipMRouteSource, ipMRouteSourceMask } ::= { ipMRouteTable 1 } IpMRouteEntry ::= SEQUENCE { ipMRouteGroup IpAddress, ipMRouteSource IpAddress, ipMRouteSourceMask IpAddress, ipMRouteUpstreamNeighbor IpAddress, ipMRouteInIfIndex Integer32, ipMRouteUpTime TimeTicks, ipMRouteExpiryTime TimeTicks, ipMRoutePkts Counter32, ipMRouteDifferentInIfPackets Counter32, ipMRouteOctets Counter32, ipMRouteProtocol INTEGER } ipMRouteGroup OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP multicast group address for which this entry contains multicast routing information." ::= { ipMRouteEntry 1 } ipMRouteSource OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The network address which when combined with the corresponding value of ipMRouteSourceMask identifies the sources for which this entry contains multicast routing information." ::= { ipMRouteEntry 2 } ipMRouteSourceMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The network mask which when combined with the corresponding value of ipMRouteSource identifies the sources for which this entry contains multicast routing information." ::= { ipMRouteEntry 3 } ipMRouteUpstreamNeighbor OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the upstream neighbor (e.g., RPF neighbor) from which IP datagrams from these sources to this multicast address are received, or 0.0.0.0 if the upstream neighbor is unknown (e.g., in CBT)." ::= { ipMRouteEntry 4 } ipMRouteInIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of ifIndex for the interface on which IP datagrams sent by these sources to this multicast address are received. A value of 0 indicates that datagrams are not subject to an incoming interface check, but may be accepted on multiple interfaces (e.g., in CBT)." ::= { ipMRouteEntry 5 } ipMRouteUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since the multicast routing information represented by this entry was learned by the router." ::= { ipMRouteEntry 6 } ipMRouteExpiryTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum amount of time remaining before this entry will be aged out. The value 0 indicates that the entry is not subject to aging." ::= { ipMRouteEntry 7 } ipMRoutePkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets which this router has received from these sources and addressed to this multicast group address." ::= { ipMRouteEntry 8 } ipMRouteDifferentInIfPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets which this router has received from these sources and addressed to this multicast group address, which were not received from the interface indicated by ipMRouteInIfIndex." ::= { ipMRouteEntry 9 } ipMRouteOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets contained in IP datagrams which were received from these sources and addressed to this multicast group address, and which were forwarded by this router." ::= { ipMRouteEntry 10 } ipMRouteProtocol OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following local(2), -- e.g., manually configured netmgmt(3), -- set via net.mgmt protocol dvmrp(4), mospf(5), pimSparseDense(6), -- PIMv1, both DM and SM cbt(7), pimSparseMode(8), -- PIM-SMv2 pimDenseMode(9), -- PIM-DMv2 igmpOnly(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "The routing mechanism via which this route was learned." ::= { ipMRouteEntry 11 } -- -- The IP Multicast Routing Next Hop Table -- ipMRouteNextHopTable OBJECT-TYPE SYNTAX SEQUENCE OF IpMRouteNextHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing information on the next hops on outgoing interfaces for routing IP multicast datagrams. Each entry is one of a list of next hops on outgoing interfaces for particular sources sending to a particular multicast group address." ::= { ipMRoute 3 } ipMRouteNextHopEntry OBJECT-TYPE SYNTAX IpMRouteNextHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the list of next hops on outgoing interfaces to which IP multicast datagrams from particular sources to a IP multicast group address are routed." INDEX { ipMRouteNextHopGroup, ipMRouteNextHopSource, ipMRouteNextHopSourceMask, ipMRouteNextHopIfIndex, ipMRouteNextHopAddress } ::= { ipMRouteNextHopTable 1 } IpMRouteNextHopEntry ::= SEQUENCE { ipMRouteNextHopGroup IpAddress, ipMRouteNextHopSource IpAddress, ipMRouteNextHopSourceMask IpAddress, ipMRouteNextHopIfIndex Integer32, ipMRouteNextHopAddress IpAddress, ipMRouteNextHopState INTEGER, ipMRouteNextHopUpTime TimeTicks, ipMRouteNextHopExpiryTime TimeTicks, ipMRouteNextHopClosestMemberHops Integer32, ipMRouteNextHopProtocol INTEGER, ipMRouteNextHopPkts Counter32 } ipMRouteNextHopGroup OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP multicast group for which this entry specifies a next hop on an outgoing interface." ::= { ipMRouteNextHopEntry 1 } ipMRouteNextHopSource OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The network address which when combined with the corresponding value of ipMRouteNextHopSourceMask identifies the sources for which this entry specifies a next hop on an outgoing interface." ::= { ipMRouteNextHopEntry 2 } ipMRouteNextHopSourceMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The network mask which when combined with the corresponding value of ipMRouteNextHopSource identifies the sources for which this entry specifies a next hop on an outgoing interface." ::= { ipMRouteNextHopEntry 3 } ipMRouteNextHopIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex value of the interface for the outgoing interface for this next hop." ::= { ipMRouteNextHopEntry 4 } ipMRouteNextHopAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the next hop specific to this entry. For most interfaces, this is identical to ipMRouteNextHopGroup. NBMA interfaces, however, may have multiple next hop addresses out a single outgoing interface." ::= { ipMRouteNextHopEntry 5 } ipMRouteNextHopState OBJECT-TYPE SYNTAX INTEGER { pruned(1), forwarding(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "An indication of whether the outgoing interface and next hop represented by this entry is currently being used to forward IP datagrams. The value 'forwarding' indicates it is currently being used; the value 'pruned' indicates it is not." ::= { ipMRouteNextHopEntry 6 } ipMRouteNextHopUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since the multicast routing information represented by this entry was learned by the router." ::= { ipMRouteNextHopEntry 7 } ipMRouteNextHopExpiryTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum amount of time remaining before this entry will be aged out. The value 0 indicates that the entry is not subject to aging." ::= { ipMRouteNextHopEntry 8 } ipMRouteNextHopClosestMemberHops OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum number of hops between this router and any member of this IP multicast group reached via this next hop on this outgoing interface. Any IP multicast datagrams for the group which have a TTL less than this number of hops will not be forwarded to this next hop." ::= { ipMRouteNextHopEntry 9 } ipMRouteNextHopProtocol OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following local(2), -- e.g., manually configured netmgmt(3), -- set via net.mgmt protocol dvmrp(4), mospf(5), pimSparseDense(6), -- PIMv1, both DM and SM cbt(7), pimSparseMode(8), -- PIM-SMv2 pimDenseMode(9), -- PIM-DMv2 igmpOnly(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "The routing mechanism via which this next-hop was learned." ::= { ipMRouteNextHopEntry 10 } ipMRouteNextHopPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets which have been forwarded using this route." ::= { ipMRouteNextHopEntry 11 } -- -- The Multicast Routing Interface Table -- ipMRouteInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF IpMRouteInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containg multicast routing information specific to interfaces." ::= { ipMRoute 4 } ipMRouteInterfaceEntry OBJECT-TYPE SYNTAX IpMRouteInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) containing the multicast routing information for a particular interface." INDEX { ipMRouteInterfaceIfIndex } ::= { ipMRouteInterfaceTable 1 } IpMRouteInterfaceEntry ::= SEQUENCE { ipMRouteInterfaceIfIndex Integer32, ipMRouteInterfaceTtl Integer32, ipMRouteInterfaceProtocol INTEGER, ipMRouteInterfaceRateLimit Integer32, ipMRouteInterfaceInMcastOctets Counter32, ipMRouteInterfaceOutMcastOctets Counter32, ipMRouteInterfaceHCInMcastOctets Counter64, ipMRouteInterfaceHCOutMcastOctets Counter64 } ipMRouteInterfaceIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex value of the interface for which this entry contains information." ::= { ipMRouteInterfaceEntry 1 } ipMRouteInterfaceTtl OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The datagram TTL threshold for the interface. Any IP multicast datagrams with a TTL less than this threshold will not be forwarded out the interface. The default value of 0 means all multicast packets are forwarded out the interface." ::= { ipMRouteInterfaceEntry 2 } ipMRouteInterfaceProtocol OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following local(2), -- e.g., static routing netmgmt(3), -- set via net.mgmt protocol dvmrp(4), mospf(5), pimSparseDense(6), -- PIMv1, both DM and SM cbt(7), pimSparseMode(8), -- PIM-SMv2 pimDenseMode(9), -- PIM-DMv2 igmpOnly(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "The routing protocol running on this interface." ::= { ipMRouteInterfaceEntry 3 } ipMRouteInterfaceRateLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The rate-limit, in kilobits per second, of forwarded multicast traffic on the interface. A rate-limit of 0 indicates that no rate limiting is done." DEFVAL { 0 } ::= { ipMRouteInterfaceEntry 4 } ipMRouteInterfaceInMcastOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets of multicast packets that have arrived on the interface." ::= { ipMRouteInterfaceEntry 5 } ipMRouteInterfaceOutMcastOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets of multicast packets that have been sent on the interface." ::= { ipMRouteInterfaceEntry 6 } ipMRouteInterfaceHCInMcastOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets of multicast packets that have arrived on the interface. This object is a 64-bit version of ipMRouteInterfaceInMcastOctets." ::= { ipMRouteInterfaceEntry 7 } ipMRouteInterfaceHCOutMcastOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets of multicast packets that have been sent on the interface. This object is a 64-bit version of ipMRouteInterfaceOutMcastOctets." ::= { ipMRouteInterfaceEntry 8 } -- -- The IP Multicast Scoped Boundary Table -- ipMRouteBoundaryTable OBJECT-TYPE SYNTAX SEQUENCE OF IpMRouteBoundaryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the router's scoped multicast address boundaries." ::= { ipMRoute 5 } ipMRouteBoundaryEntry OBJECT-TYPE SYNTAX IpMRouteBoundaryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the ipMRouteBoundaryTable representing a scoped boundary." INDEX { ipMRouteBoundaryIfIndex, ipMRouteBoundaryAddress, ipMRouteBoundaryAddressMask } ::= { ipMRouteBoundaryTable 1 } IpMRouteBoundaryEntry ::= SEQUENCE { ipMRouteBoundaryIfIndex Integer32, ipMRouteBoundaryAddress IpAddress, ipMRouteBoundaryAddressMask IpAddress, ipMRouteBoundaryStatus RowStatus } ipMRouteBoundaryIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IfIndex value for the interface to which this boundary applies. Packets with a destination address in the associated address/mask range will not be forwarded out this interface." ::= { ipMRouteBoundaryEntry 1 } ipMRouteBoundaryAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The group address which when combined with the corresponding value of ipMRouteBoundaryAddressMask identifies the group range for which the scoped boundary exists. Scoped addresses must come from the range 239.x.x.x." ::= { ipMRouteBoundaryEntry 2 } ipMRouteBoundaryAddressMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The group address mask which when combined with the corresponding value of ipMRouteBoundaryAddress identifies the group range for which the scoped boundary exists." ::= { ipMRouteBoundaryEntry 3 } ipMRouteBoundaryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row, by which new entries may be created, or old entries deleted from this table." ::= { ipMRouteBoundaryEntry 4 } -- conformance information ipMRouteMIBConformance OBJECT IDENTIFIER ::= { ipMRouteMIB 2 } ipMRouteMIBCompliances OBJECT IDENTIFIER ::= { ipMRouteMIBConformance 1 } ipMRouteMIBGroups OBJECT IDENTIFIER ::= { ipMRouteMIBConformance 2 } -- compliance statements ipMRouteMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the IP Multicast MIB." MODULE -- this module MANDATORY-GROUPS { ipMRouteMIBBasicGroup } GROUP ipMRouteMIBBoundaryGroup DESCRIPTION "This group is only required to support management of scoped multicast address boundaries." OBJECT ipMRouteBoundaryStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." GROUP ipMRouteMIBHCInterfaceGroup DESCRIPTION "This group is mandatory only for those network interfaces for which the value of the corresponding instance of ifSpeed is greater than 20,000,000 bits/second." ::= { ipMRouteMIBCompliances 1 } -- units of conformance ipMRouteMIBBasicGroup OBJECT-GROUP OBJECTS { ipMRouteEnable, ipMRouteUpstreamNeighbor, ipMRouteInIfIndex, ipMRouteUpTime, ipMRouteExpiryTime, ipMRoutePkts, ipMRouteDifferentInIfPackets, ipMRouteOctets, ipMRouteNextHopState, ipMRouteNextHopUpTime, ipMRouteNextHopExpiryTime, ipMRouteNextHopProtocol, ipMRouteNextHopPkts, ipMRouteInterfaceTtl, ipMRouteInterfaceProtocol, ipMRouteInterfaceRateLimit, ipMRouteInterfaceInMcastOctets, ipMRouteInterfaceOutMcastOctets, ipMRouteProtocol } STATUS current DESCRIPTION "A collection of objects to support basic management of IP Multicast routing." ::= { ipMRouteMIBGroups 1 } ipMRouteMIBHopCountGroup OBJECT-GROUP OBJECTS { ipMRouteNextHopClosestMemberHops } STATUS current DESCRIPTION "A collection of objects to support management of the use of hop counts in IP Multicast routing." ::= { ipMRouteMIBGroups 2 } ipMRouteMIBBoundaryGroup OBJECT-GROUP OBJECTS { ipMRouteBoundaryStatus } STATUS current DESCRIPTION "A collection of objects to support management of scoped multicast address boundaries." ::= { ipMRouteMIBGroups 3 } ipMRouteMIBPktsOutGroup OBJECT-GROUP OBJECTS { ipMRouteNextHopPkts } STATUS current DESCRIPTION "A collection of objects to support management of packet counters for each outgoing interface entry of a route." ::= { ipMRouteMIBGroups 4 } ipMRouteMIBHCInterfaceGroup OBJECT-GROUP OBJECTS { ipMRouteInterfaceHCInMcastOctets, ipMRouteInterfaceHCOutMcastOctets } STATUS current DESCRIPTION "A collection of objects providing information specific to high speed (greater than 20,000,000 bits/second) network interfaces." ::= { ipMRouteMIBGroups 5 } END -- CELL-ACE SW-REV 2.65 RELEASE DATE 1998.06.03 ATM-TC-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-IDENTITY, Integer32, TimeTicks, mib-2 FROM SNMPv2-SMI TEXTUAL-CONVENTION FROM SNMPv2-TC; atmMIB OBJECT IDENTIFIER ::= { mib-2 37 } atmMIBObjects OBJECT IDENTIFIER ::= {atmMIB 1} atmTCMIB MODULE-IDENTITY LAST-UPDATED "9701080200Z" ORGANIZATION "IETF AToMMIB Working Group" CONTACT-INFO " Michael Noto Postal: Network Equipment Technologies 800 Saginaw Drive RM 21.1.111 Redwood City, CA 94063 USA Tel: +1 415 569-7134 E-mail: mike_noto@net.com Ethan Mickey Spiegel Postal: Cisco Systems 170 W. Tasman Dr. San Jose, CA 95134 USA Tel: +1 408 526 6408 E-mail: mspiegel@cisco.com Kaj Tesink Postal: Bell Communications Research 331 Newman Springs Road Red Bank, NJ 07701 USA Tel: +1 908 758 5254 Fax: +1 908 758 4177 E-mail: kaj@cc.bellcore.com" DESCRIPTION "This MIB Module provides Textuanl Coventions and OBJECT-IDENTITY Objects to be used by ATM systems." ::= { atmMIB 3 } -- ::= { mib-2 37 3 } -- atmMIB 3 -- See [14]. -- The Textual Conventions defined below are organized -- alphabetically AtmAddr ::= TEXTUAL-CONVENTION DISPLAY-HINT "1x" STATUS current DESCRIPTION "The ATM address used by the network entity. The address types are: no address (0 octets), E.164 (8 octets), and NSAP (20 octets). Note: The E.164 address is encoded in BCD format." SYNTAX OCTET STRING (SIZE(0|8|20)) AtmConnCastType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The type of topology of a connection (point- to-point, point-to-multipoint). In the case of point-to-multipoint, the orientation of this VPL or VCL in the connection. On a host: - p2mpRoot indicates that the host is the root of the p2mp connection. - p2mpLeaf indicates that the host is a leaf of the p2mp connection. On a switch: - p2mpRoot indicates that cells received by the switching fabric from the interface are from the root of the p2mp connection. - p2mpLeaf indicates that cells transmitted to the interface from the switching fabric are to the leaf of the p2mp connection." SYNTAX INTEGER { p2p(1), p2mpRoot(2), p2mpLeaf(3) } AtmConnKind ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The use of call control. The use is as follows: pvc(1) Virtual link of a PVC. Should not be used in an PVC/SVC (i.e., SPVC) crossconnect. svcIncoming(2) Virtual link established after a received signaling request to setup an SVC. svcOutgoing(3) Virtual link established after a transmitted or forwarded signaling request to setup an SVC. spvcInitiator(4) Virtual link at the PVC side of an SVC/PVC crossconnect, where the switch is the initiator of the SPVC setup. spvcTarget(5) Virtual link at the PVC side of an SVC/PVC crossconnect, where the switch is the target of the SPVC setup. An spvcInitiator is always cross-connected to an svcOutgoing, and an spvcTarget is always cross-connected to an svcIncoming." SYNTAX INTEGER { pvc(1), svcIncoming(2), svcOutgoing(3), spvcInitiator(4), spvcTarget(5) } AtmIlmiNetworkPrefix ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A network prefix used for ILMI address registration. In the case of ATM endsystem addresses (AESAs), the network prefix is the first 13 octets of the address which includes the AFI, IDI, and HO-DSP fields. In the case of native E.164 addresses, the network prefix is the entire E.164 address encoded in 8 octets, as if it were an E.164 IDP in an ATM endsystem address structure." REFERENCE "ATM Forum ILMI 4.0 Section 9, ATM Forum UNI Signalling 4.0 Section 3" SYNTAX OCTET STRING (SIZE(8|13)) AtmInterfaceType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The connection setup procedures used for the identified interface. Other: Connection setup procedures other than those listed below. Auto-configuration: Indicates that the connection setup procedures are to be determined dynamically, or that determination has not yet been completed. One such mechanism is via ATM Forum ILMI auto-configuration procedures. ITU-T DSS2: - ITU-T Recommendation Q.2931, Broadband Integrated Service Digital Network (B-ISDN) Digital Subscriber Signalling System No.2 (DSS2) User-Network Interface (UNI) Layer 3 Specification for Basic Call/Connection Control (September 1994) [5] - ITU-T Draft Recommendation Q.2961, B-ISDN DSS 2 Support of Additional Traffic Parameters (May 1995) [8] - ITU-T Draft Recommendation Q.2971, B-ISDN DSS 2 User Network Interface Layer 3 Specification for Point-to-multipoint Call/connection Control (May 1995) [9] ATM Forum UNI 3.0: ATM Forum, ATM User-Network Interface, Version 3.0 (UNI 3.0) Specification, (1994) [3]. ATM Forum UNI 3.1: ATM Forum, ATM User-Network Interface, Version 3.1 (UNI 3.1) Specification, (November 1994) [4]. ATM Forum UNI Signalling 4.0: ATM Forum, ATM User-Network Interface (UNI) Signalling Specification Version 4.0, af-sig-0061.000 (June 1996) [7]. ATM Forum IISP (based on UNI 3.0 or UNI 3.1) : Interim Inter-switch Signaling Protocol (IISP) Specification, Version 1.0, af-pnni-0026.000, (December 1994) [10]. ATM Forum PNNI 1.0 : ATM Forum, Private Network-Network Interface Specification, Version 1.0, af-pnni-0055.000, (March 1996) [6]. ATM Forum B-ICI: ATM Forum, B-ICI Specification, Version 2.0, af-bici-0013.002, (November 1995) [11]. ATM Forum UNI PVC Only: An ATM Forum compliant UNI with the signalling disabled. ATM Forum NNI PVC Only: An ATM Forum compliant NNI with the signalling disabled." SYNTAX INTEGER { other(1), autoConfig(2), ituDss2(3), atmfUni3Dot0(4), atmfUni3Dot1(5), atmfUni4Dot0(6), atmfIispUni3Dot0(7), atmfIispUni3Dot1(8), atmfIispUni4Dot0(9), atmfPnni1Dot0(10), atmfBici2Dot0(11), atmfUniPvcOnly(12), atmfNniPvcOnly(13) } AtmServiceCategory ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The service category for a connection." REFERENCE "ATM Forum Traffic Management 4.0." SYNTAX INTEGER { other(1), -- none of the following cbr(2), -- constant bit rate rtVbr(3), -- real-time variable bit rate nrtVbr(4), -- non real-time variable bit rate abr(5), -- available bit rate ubr(6) -- unspecified bit rate } AtmSigDescrParamIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The value of this object identifies a row in the atmSigDescrParamTable. The value 0 signifies that none of the signalling parameters defined in the atmSigDescrParamTable are applicable." SYNTAX INTEGER (0..2147483647) AtmTrafficDescrParamIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The value of this object identifies a row in the atmTrafficDescrParamTable. The value 0 signifies that no row has been identified." SYNTAX INTEGER (0..2147483647) AtmVcIdentifier ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The VCI value for a VCL. The maximum VCI value cannot exceed the value allowable by atmInterfaceMaxVciBits defined in ATM-MIB." SYNTAX INTEGER (0..65535) AtmVpIdentifier ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The VPI value for a VPL or VCL. The value VPI=0 is only allowed for a VCL. For ATM UNIs supporting VPCs the VPI value ranges from 1 to 255. For ATM UNIs supporting VCCs the VPI value ranges from 0 to 255. For ATM NNIs the VPI value ranges from 0 to 4095. The maximum VPI value cannot exceed the value allowable by atmInterfaceMaxVpiBits defined in ATM-MIB." SYNTAX INTEGER (0..4095) AtmVorXAdminStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The value determines the desired administrative status of a virtual link or cross-connect. The up and down states indicate that the traffic flow is enabled or disabled respectively on the virtual link or cross-connect." SYNTAX INTEGER { up(1), down(2) } AtmVorXLastChange ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The value of MIB II's sysUpTime at the time this virtual link or cross-connect entered its current operational state. If the current state was entered prior to the last re-initialization of the agent then this object contains a zero value." SYNTAX TimeTicks AtmVorXOperStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The value determines the operational status of a virtual link or cross-connect. The up and down states indicate that the traffic flow is enabled or disabled respectively on the virtual link or cross-connect. The unknown state indicates that the state of it cannot be determined. The state will be down or unknown if the supporting ATM interface(s) is down or unknown respectively." SYNTAX INTEGER { up(1), down(2), unknown(3) } -- OBJECT-IDENTITIES: -- The following atmTrafficDescriptorTypes has been moved -- from [14]. atmTrafficDescriptorTypes OBJECT IDENTIFIER ::= {atmMIBObjects 1} --atmTrafficDescriptorTypes OBJECT IDENTIFIER ::= {mib-2 37 1 1} -- atmMIBObjects -- See [14]. -- All other and new OBJECT IDENTITIES go here: atmObjectIdentities OBJECT IDENTIFIER ::= {atmTCMIB 1} -- The following values are defined for use as -- possible values of the ATM traffic descriptor type. atmNoTrafficDescriptor OBJECT-IDENTITY STATUS deprecated DESCRIPTION "This identifies the no ATM traffic descriptor type. Parameters 1, 2, 3, 4, and 5 are not used. This traffic descriptor type can be used for best effort traffic." ::= {atmTrafficDescriptorTypes 1} atmNoClpNoScr OBJECT-IDENTITY STATUS current DESCRIPTION "This traffic descriptor type is for no CLP and no Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: peak cell rate in cells/second for CLP=0+1 traffic Parameter 2: CDVT in tenths of microseconds Parameter 3: not used Parameter 4: not used Parameter 5: not used. This traffic descriptor type is applicable to CBR connections following the UNI 3.0/3.1 conformance definition for PCR CLP=0+1 [3,4]. These CBR connections differ from CBR.1 connections [13] in that the CLR objective applies only to the CLP=0 cell flow. This traffic descriptor type is also applicable to connections following the UBR.1 conformance definition [13]." ::= {atmTrafficDescriptorTypes 2} atmClpNoTaggingNoScr OBJECT-IDENTITY STATUS deprecated DESCRIPTION "This traffic descriptor is for CLP without tagging and no Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: peak cell rate in cells/second for CLP=0+1 traffic Parameter 2: peak cell rate in cells/second for CLP=0 traffic Parameter 3: not used Parameter 4: not used Parameter 5: not used." ::= {atmTrafficDescriptorTypes 3} atmClpTaggingNoScr OBJECT-IDENTITY STATUS deprecated DESCRIPTION "This traffic descriptor is for CLP with tagging and no Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: peak cell rate in cells/second for CLP=0+1 traffic Parameter 2: peak cell rate in cells/second for CLP=0 traffic, excess tagged as CLP=1 Parameter 3: not used Parameter 4: not used Parameter 5: not used." ::= {atmTrafficDescriptorTypes 4} atmNoClpScr OBJECT-IDENTITY STATUS current DESCRIPTION "This traffic descriptor type is for no CLP with Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: peak cell rate in cells/second for CLP=0+1 traffic Parameter 2: sustainable cell rate in cells/second for CLP=0+1 traffic Parameter 3: maximum burst size in cells Parameter 4: CDVT in tenths of microseconds Parameter 5: not used. This traffic descriptor type is applicable to VBR connections following the UNI 3.0/3.1 conformance definition for PCR CLP=0+1 and SCR CLP=0+1 [3,4]. These VBR connections differ from VBR.1 connections [13] in that the CLR objective applies only to the CLP=0 cell flow." ::= {atmTrafficDescriptorTypes 5} atmClpNoTaggingScr OBJECT-IDENTITY STATUS current DESCRIPTION "This traffic descriptor type is for CLP with Sustained Cell Rate and no tagging. The use of the parameter vector for this type: Parameter 1: peak cell rate in cells/second for CLP=0+1 traffic Parameter 2: sustainable cell rate in cells/second for CLP=0 traffic Parameter 3: maximum burst size in cells Parameter 4: CDVT in tenths of microseconds Parameter 5: not used. This traffic descriptor type is applicable to connections following the VBR.2 conformance definition [13]." ::= {atmTrafficDescriptorTypes 6} atmClpTaggingScr OBJECT-IDENTITY STATUS current DESCRIPTION "This traffic descriptor type is for CLP with tagging and Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: peak cell rate in cells/second for CLP=0+1 traffic Parameter 2: sustainable cell rate in cells/second for CLP=0 traffic, excess tagged as CLP=1 Parameter 3: maximum burst size in cells Parameter 4: CDVT in tenths of microseconds Parameter 5: not used. This traffic descriptor type is applicable to connections following the VBR.3 conformance definition [13]." ::= {atmTrafficDescriptorTypes 7} atmClpNoTaggingMcr OBJECT-IDENTITY STATUS current DESCRIPTION "This traffic descriptor type is for CLP with Minimum Cell Rate and no tagging. The use of the parameter vector for this type: Parameter 1: peak cell rate in cells/second for CLP=0+1 traffic Parameter 2: CDVT in tenths of microseconds Parameter 3: minimum cell rate in cells/second Parameter 4: unused Parameter 5: unused. This traffic descriptor type is applicable to connections following the ABR conformance definition [13]." ::= {atmTrafficDescriptorTypes 8} atmClpTransparentNoScr OBJECT-IDENTITY STATUS current DESCRIPTION "This traffic descriptor type is for the CLP- transparent model [13] and no Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: peak cell rate in cells/second for CLP=0+1 traffic Parameter 2: CDVT in tenths of microseconds Parameter 3: not used Parameter 4: not used Parameter 5: not used. This traffic descriptor type is applicable to connections following the CBR.1 conformance definition [13]. Connections specifying this traffic descriptor type will be rejected at UNI 3.0 or UNI 3.1 interfaces. For a similar traffic descriptor type that can be accepted at UNI 3.0 and UNI 3.1 interfaces, see atmNoClpNoScr." ::= {atmTrafficDescriptorTypes 9} atmClpTransparentScr OBJECT-IDENTITY STATUS current DESCRIPTION "This traffic descriptor type is for the CLP- transparent model [13] with Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: peak cell rate in cells/second for CLP=0+1 traffic Parameter 2: sustainable cell rate in cells/second for CLP=0+1 traffic Parameter 3: maximum burst size in cells Parameter 4: CDVT in tenths of microseconds Parameter 5: not used. This traffic descriptor type is applicable to connections following the VBR.1 conformance definition [13]. Connections specifying this traffic descriptor type will be rejected at UNI 3.0 or UNI 3.1 interfaces. For a similar traffic descriptor type that can be accepted at UNI 3.0 and UNI 3.1 interfaces, see atmNoClpScr." ::= {atmTrafficDescriptorTypes 10} atmNoClpTaggingNoScr OBJECT-IDENTITY STATUS current DESCRIPTION "This traffic descriptor type is for no CLP with tagging and no Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: peak cell rate in cells/second for CLP=0+1 traffic Parameter 2: CDVT in tenths of microseconds Parameter 3: not used Parameter 4: not used Parameter 5: not used. This traffic descriptor type is applicable to connections following the UBR.2 conformance definition [13]." ::= {atmTrafficDescriptorTypes 11} END RAPID-CITY DEFINITIONS ::= BEGIN -- Title: Rapid-City Communications Enterprise MIB -- Date: December 4, 1996 -- By: Edwin Tsang -- Revision: -- v1 : 05/28/96 - Initial version from Ian Wallis. -- v2 : 06/23/96 - VLAN table now has port memberships -- v3 : 06/27/96 - Added Port table -- v4 : 07/03/96 - Rearranged rcSystem group so scalars -- are grouped together -- v5 : 07/29/96 - Modified rcVlan and rcCard groups. -- Added rcMirror and rcDipSwitch groups. -- v6 : 08/09/96 - Cleaned up rcVlanPortTable and rcTftp -- groups. -- v7 : 08/21/96 - Added rcTraps group, rcVlanColorCode, -- rcSysLastVlanChange, rcError group. -- v9 : 09/10/96 - Added rcTblSize group. -- Added rc16x100BaseTX(7) to rcCardType variable. -- Added rcVlanStpTrapEnable to rcVlanEntry. -- Added rcStpNewRoot and rcStpTopologyChange traps. -- Added rcPortOperation to rcPortEntry. -- Added rcSysCpuUtil and rcSysSwitchFabricUtil to -- rcSystem. -- Added rcVlanHighPriority and rcPortHighPriority. -- v10 : 09/23/96 - Changed rcSysNvRam to rcSysNvRamSize. -- Added rcVlanRoutingEnable and rcVlanIfIndex. -- Added rcIp group. -- v11 : 10/01/96 - Added rcSysRmonEnable, rcSysRmonMemSize, and -- rcSysLastSaveToNVRam. -- v12 : 10/16/96 - Added rcSysRmonSaveConfig. -- Changed rcIpAdEntBcastAddr to -- rcIpAdEntBcastAddrFormat -- v13 : 11/1/96 - Added rcTestTypes, rcTestCodesAdded, -- and rcQos. -- v14 : 11/12/96 - Added saveToSlaveNVRAM and switchOver to -- rcSysAction variable. -- Changed range of rcVlanColorCode. -- Removed rcPortPerformBridging. -- Removed rcPortOperation. -- Added rcSysResult. -- Added rcSysLastSaveToSlaveNVRam. -- Added rcVlanAction and rcVlanResult. -- Added rcPortAction and rcPortResult. -- v15 : 12/04/96 - Added rcSysSupportRouting. -- Changed rcVlanPortMembers. -- Added rcVlanMemberType, rcVlanAllowToJoin -- rcVlanType, rcVlanProtocolId, -- rcVlanSubnetAddr, rcVlanSubnetMask. -- Added rcVlanPortType. -- Added rcVlanMacTable. -- Added rcChasNumPorts. -- Added rcCardPCMCIAType. -- Added rcIpConfTable. -- Removed loadFromNVRAM from rcSysAction. -- v16 : 12/09/96 - Changed rcVlanProtocolId to an enumeration. -- Added rcErrorText. -- Maded rcQosProtocol an index in rcQosEntry. -- v17 : 12/12/96 - Added rcStgTable and rcStgPortTable. -- Changed rcStpNewRoot and rcStpTopologyChange -- traps to use rcStgId instead of rcVlanId. -- v18 : 12/18/96 - Added rcVlanStgId. -- Removed rcVlanStpEnable, rcVlanStpTrapEnable. -- Shifted rVlanPortMembers, rcVlanMemberType, -- rcVlanNotAllowToJoin. -- Added fail(14) to rcPortAction. -- Added rcPortDefaultConnector. -- Added rcPortActiveConnector. -- Renamed all(5) to flushAll(5) to rcPortAction. -- Added switchConnector(6) to rcPortAction. -- Added types to rcCardType. -- Added rcVlanMemberType to rcVlanStaticMembers. -- Removed rcVlanPortTrunk -- Added rcErrorReturnCode -- Added rcTblArVlanByPortAdded -- Added rcTblArVlanByPortDeleted -- Added rcTblArVlanByProtocolAdded -- Added rcTblArVlanByProtocolDeleted -- Added rcTblArVlanByIpSubnetAdded -- Added rcTblArVlanByIpSubnetDeleted -- Added rcTblArIpSubnetsAdded -- Added rcTblArIpSubnetsDeleted -- Added rcTblArRsvpsAdded -- Added rcTblArRsvpsDeleted -- Added rcTblArIpMcastAdded -- Added rcTblArIpMcastDeleted -- Added rcTblArFree -- Added rcTblArTblSize -- Added rcTblArMcastTblSize -- Added rcTblArFreeMcastGroups -- Added rcTblBrdgFdbSize -- Added rcStgPortMembers -- Added rcQosPriority -- Added rcStgUnassignedPorts -- v19 : 1/6/97 - Added rcSysTrapRecvVersion -- v20 : 1/7/97 - Removed switchConnector(6) from rcPortAction -- Added write access to rcPortActiveConnector -- Added rcPortStandbyConnectorStatus to -- rcPortTable. -- v21 : 1/9/97 - Renamed rcPortDefaultConnector to -- rcPortPrimaryConnector. -- Removed write access to rcPortActiveConnector. -- Renamed rcPortStandbyConnectorStatus to -- rcPortBackupConnectorStatus. -- Renamed rcVlanColorCode to rcVlanColor -- Renamed switchOver to cpuSwitchOver. -- Changed Access of rcStgId to read-only. -- v22 : 1/17/97 - Added rcBoot group -- Added rcPing group -- Added rcTraceTable -- Added rcTrace trap -- Added rcBridge Tables -- v23 : 1/20/97 - Added rcTraceFeatureId and rcTraceLevel -- objects to rcTraceNotification trap. -- Removed rcPingPort from rcPing group. -- Added rcBridgeFdbTblSize -- Added rcBridgeStaticTblSize -- Added rcBridgeFilterTblSize -- Removed rcStgPortEnable from -- rcStgPortTable -- Added rcStgPortEnableStg to -- rcStgPortTable -- Added rcStgPortInConfigBpdus, -- Added rcStgPortInTcnBpdus, -- Added rcStgPortInBadBpdus -- Added rcStgPortOutConfigBpdus, -- Added rcStgPortOutTcnBpdus -- Removed ipxAny and snaAny from -- rcVlanProtocolId -- Renamed byMacAddr to bySrcMac in -- rcVlanType -- Added byDstMcast value to rcVlanType -- v24 : 1/23/97 - Added rcSysRmonTrapOption. -- Added agent, port, chassis, bridge, ip -- to rcTraceFeatureId. -- v25 : 1/25/97 - Removed rcTraceRowStatus. -- Changed Access of rcTraceFeatureId to Read-only -- Added more error codes to rcErrorReturnCode. -- Rearranged the objects in the rcMirrorGroup. -- Renamed rcMirrorByPort to rcMirrorByPortEnable -- Added rcMirrorSaveConfig to rcMirror. -- Added rcWebEnableServer. -- Added rcWebAccessTable. -- Added rcWebAccessTblSize scalar object. -- Added rcVlanAgingTime in rcVlanTable. -- Added rcStgPortFastStart in rcStgPortTable. -- Added flushDynMemb to rcVlanAction. -- v26 : 2/13/97 - Rename downloadSw to downloadSwToFlash -- and added downloadSwToPcmcia to rcTftpAction. -- Modified rcIpAdEtReasmMaxSize to be read-only. -- Added "removed" to rcCardOperStatus. -- Added more featureIds to rcTraceFeatureId. -- v27 : 2/19/97 - Added checkSwInFlash and -- checkSwInPcmcia to rcTftpAction. -- Added more result codes to rcTftpResult. -- v27 : 2/19/97 - Added checkSwInFlash and -- checkSwInPcmcia to rcSysAction. -- Added more result codes to rcSysResult. -- Added more result codes to rcTftpResult. -- v28 : 2/28/97 - Expanded rcWeb and removed rcWebAccessTbl. -- v29 : 3/20/97 - Changed rcCardSerialNum and rcChassisSerialNum -- to a DisplayString. -- v30 : 3/26/97 - Added rcSysSupportWebServer to rcSystem Group. -- Removed rcStgName from rcStgTable. -- Changed rcStgId range from 1..50 to 1..25. -- Added rcVlanPotentialMembers to rcVlanTable. -- Added rcChasType to rcChassisGroup. -- Removed rcChasFanOperStatus from rcChassisGroup. -- Added rcChasFanTable. -- Modified rcChasPowerSupplyId range. -- Added rcErrorSendTrap to rcError group. -- Added rcPortType, rcPortAutoNegotiate, rcPortDuplex, -- rcPortSetDuplex, rcPortSetSpeed to rcPortTable. -- Changed enterprise mib oid from -- 1024 to 2272. -- v31 : 3/31/97 - changed enums for rcChasType. -- changed rcF1200 and rcF600 OID. -- v32 : 4/01/97 - renamed rcPortSetSpeed to rcPortAdminSpeed -- - renamed rcPortSetDuplex to rcPortAdminDuplex -- - renamed rcPortDuplex to rcPortOperDuplex -- - Added rcPortOperSpeed to rcPortTable. -- - Added rcIpFlowTable. -- - Removed "both" from trap version. -- - Added rcStatGigTable. -- v33 : 4/21/97 - Added default value for rcStgTaggedBpduAddress. -- Removed rcStgTagAccessPortBpdus. -- Added rcVlanMacAddress. -- Added additional enums to rcErrorReturnCode. -- Removed rcStatGigRxFlowControlFrames and -- rcStatGigRxRuntFrames. -- Added rcStatTbl. -- v34 : 5/08/97 - Added a bunch of bridging and routing -- counters to the rcStat group. -- v35 : 6/09/97 - Added a bunch of bridging and routing -- Added rcPortRipEnable, rcPortOspfEnable, -- rcPortOspfRtrPriority, rcPortOspfMetric, -- rcPortOpsfAuthKey to rcPortTable. -- Added additional error codes for ospf. -- Added rcStatOspf group. -- Added rcStatOspfIfTable. -- Added error codes for Ospf. -- Added rcIpRoutingRedistributeRipToOspf group. -- Added rcIpRoutingRedistributeOspfToRip group. -- Added rcIpRoutingRedistributeRipToOspfRouteTable -- Added rcIpRoutingRedistributeOspfToRipRouteTable. -- Added counters for mismatches in rcStatOspfIfTable. -- Added rcIpConfAddrAssigned in rcIpConfTable. -- Added rcSysOspfTrapEnable in rcSystem group. -- Added rcIpConfOspfTable. -- Moved rcIpConfOspfMetric, rcIpConfOspfRtrPriority, -- and rcIpOspfAuthKey to rcIpConfOspfTable. -- v36 : 6/16/97 - Added rc2x1000BaseFF200, rc8x100BaseTXF200, -- rc16x100BaseTXF200 to rcCardType. -- Misc. syntax changes to rcStatEntry group. -- Changed all variables that are used as -- ifIndex to the InterfaceIndex variable -- type. -- v37 : 6/30/97 - changed range for FanId values. -- added additional error codes. -- renamed the following variables: -- rcMirrorDstPort to rcMirrorByPortMirrorPort -- rcMirrorEnableSrcPortOne to rcMirrorByPortEnableMirroredPortOne -- rcMirrorSrcPortOne to rcMirrorByPortMirroredPortOne. -- rcMirrorEnableSrcPortTwo to rcMirrorByPortEnableMirroredPortTwo -- rcMirrorSrcPortTwo to rcMirrorByPortMirroredPortTwo. -- removed rcPing group -- removed rcTrace group -- v38 : 7/09/97 - added new error codes -- added new enums to rcTftpResult -- added rcStgFastStart to rcStgTable. -- v39 : 7/15/97 - added InFlowCtrlPkts, OutFlowCtrlPkts to -- rcStatGigTable. -- removed enum "removed" from rcCardOperStatus. -- Added enum "mbps1000" to rcPortAdminSpeed. -- Added new error codes. -- v40 : 7/10/97 - added rcIpConfOspfCost group. -- added rcIpRoutingRedistributeRipToOspfRouteMetric -- and rcIpRoutingRedistributeOspfToRipRouteMetric -- removed LeakAllSubnets from -- rcIpRoutingRedistributeRipToOspfTable. -- removed Internal, External1 and External2 -- from rcIpRoutingRedistributeRipToOspfTable. -- Added rcIpRoutingRedistributeOspfToRipUseDefaultMetric -- Added rcIpRoutingRedistributeRipToOspfUseDefaultMetric -- Added ospf error codes. -- Added rcCardPartNumber in rcCardEntry. -- Changed saveToSlaveNVRAM to saveToStandbyNVRAM. -- Added rc2x1000BaseDualFF200 to rcCardType. -- v41 : 8/28/97 - Changed rcCardType to new format. -- Changed rcChasType to new format. -- Removed mbps1000 enumeration. -- Removed rcStgFastStart variable. -- vigmp : 6/07/97 - Added rcIpConfIgmpTable, rcIgmpGroupTable. -- Added rcStatIgmp group. -- Added new card types for rcCardType. -- v42 : 09/09/97 - Made rcIpAdEntBcastAddrFormat read-only. -- v43 : 9/15/97 - added rcIpConfOspfHelloInterval and -- rcIpConfOspfRtrDeadInterval to rcIpConfOspfTable -- added rcIpConfOspf group. -- moved rcSysOspfTrapEnable to rcIpConfOspf group. -- added LsdbTblSize to rcStatOspf group. -- v44 : 09/16/97 - Added rcPortIndex to rcStpTopologyChange trap. -- Added additional error codes. -- v45 : 09/18/97 - Added rcChasPowerSupplyDown rcChasFanDown -- traps. -- v46 : 09/26/97 - Changed rcSysIpAddr, rcSysNetMask, and rcSysBroadcast -- from read-write to read-only. -- v47 : 10/28/97 - Added rcSysTrapRecvSrcAddress to rcSysTrapRecvTable. -- - Added enums to rcTftpResult. -- - Added "other(n)" enum to rcPortPrimaryConnector, -- rcPortActiveConnector, rcPortBackupConnectorStatus, -- rcPortAdminSpeed. -- v48 : 10/24/97 - Removed rcIpConfOspfExternalMetricType. -- Renamed UseDefaultMetric to UseExplicitMetric -- and DefaultMetric to ExplicitMetric in -- RedistributeRipToOspf and RedistributeOspfToRip -- Added ExternalMetricType to RedistributeRipToOspf -- Added rcIpRoutingRedistributeDirectToOspf -- and rcIpRoutingRedistributeStaticToOspf grps -- removed un used error codes (148, 153, 158). -- Added rcIpRoutingRedistributeDirectToRip -- and rcIpRoutingRedistributeStaticToRip grps. -- Added new error codes for ip addr. -- v49 : 11/24/97 - Added rcIpRouteTable group. -- v50 : 11/24/97 - Modified the value of rcIpConfOspfMetric -- Modified the default value of -- rcIpRoutingRedistributeDirectToOspfExplicitMetric. -- v51 : 12/01/97 - Changed rcSysTrapRecvVersion to v1. -- Added enums to rcTftpAction and rcTftpResult. -- v52 : 12/03/97 - Added rcHighPriorityMode. -- v53 : 12/18/97 - Added rcIpConfDhcpTable and rcIpDhcpForwardTable. -- v54 : 12/29/97 - Changed rcVlanPotentialMembers to rcVlanActiveMembers. -- Added rcVlanPortDiscardTaggedFrames, -- rcVlanPortDiscardUntaggedFrames, -- rcVlanPortDefaultVlanId. -- Added rcSysLastIpAddrChange. -- v55 : 12/31/97 - Added rcDevice group. -- v56 : 01/09/97 - Fixed compiler warning messages and added -- default values to some DHCP variables. -- v57 : 01/12/97 - Added enums to rcErrorReturnCode. -- Changed Max VLAN IDs from 4095 to 4094. -- v58 : 01/21/98 - Obsoleted rcBoot. -- Took rcDeviceLastBootSourceFileNum off from rcDevice. -- Added rcDeviceFlashNumFiles, rcDevicePcmciaNumFiles -- into rcDevice. -- For rcDevice, added invalidDeviceFileNumber(179), -- notExecutableDeviceFile(180), deletedDeviceFile(181) -- into rcError. -- Changed rcDeviceFlashFileMod to rcDeviceFlashFileMode. -- For rcDeviceAction, changed squeezePcmica(3) to -- squeezePcmcia(3). -- v59 : 01/28/98 - Added enums to rcCardType. -- Added vines(13) to rcVlanProtocolId. -- v60 : 01/26/98 - Modified enum for rcPortAdminSpeed. -- Added enums to rcCardType. -- v61 : 02/02/98 - Added rcTestTypesExtLoopBack. -- v62 : 02/06/98 - Changed IpDhcpForwardMode enum value. -- Added rcDeviceConfigSource and rcDeviceConfigSourceFileNum. -- v63 : 02/09/98 - Changed FileNum variables in rcDevice to be FileNames. -- v64 : 02/19/97 - Added rcIpFilter group and rcMlt group. -- v64.1 : 04/09/98 - Modify the two "FIXME" field in rcIpFilter group. -- v65 : 02/27/98 - Added more error codes. -- Added rcPortLock group. -- Added rcPortLocked. -- v66 : 02/25/98 - Added recoverFlash and recoverPcmcia to rcDeviceAction. -- v66 : 04/16/98 - Added snoopIpMcastAddrExist, error code 215. -- v66.1 : 04/02/98 - Added rc2x1000BaseXDWG and rc2x1000BaseXDBB card types. -- v66.2 : 04/16/98 - Changed snoopIpMcastAddrExist to snoopStaticGroupExist. -- v67 : 03/05/98 - Added rcCli group. -- v68 : 03/09/98 - Changed all read-write variables that have none(1) -- to none(0). -- Added IdList data type. -- Added rcSysCommReadWriteLayer3 and rcSysCommReadWriteLayer2. -- v69 : 03/18/98 - Added rcSysAccessPolicyEnable and -- rcSysAccessPolicyTable. -- v70 : 03/18/98 - Added error code invalidDeviceFileLength -- v71 : 03/23/98 - Backed out changes to xxxAction variables that made -- none(1) to none(0). -- - Added flushSnoopMembers to rcVlanAction. -- v72 : 04/21/98 - Added rcIpPolicyAddrTable, -- rcIpPolicyNetTable, rcIpPolicyListTable, -- rcIpPolicyRipAnnounceTable, rcIpPolicyOspfAnnounceTable, -- rcIpPolicyRipAcceptTable, rcIpPolicyOspfAcceptTable -- v73 : 04/29/98 - obsoleted rcIpRoutingRedistribute groups. -- added additional error codes. -- v74 : 04/30/98 - added "none" to rcIpFilterPortMode. -- v74.1 : 05/01/98 - changed the choice order of rcIpFilterPortMode. -- v75 : 05/08/98 - added "resetConsole" and "resetModem" to rcSysAction. -- v76 : 05/08/98 - added "rcMltPortType" to rcMltTable. -- v77 : 05/11/98 - Added rcVlanUserDefinedPid. -- Added new enums for rcVlanProtocolId. -- Added rcIpConfGlobal group. -- v78 : 05/19/98 - Added error codes for rcip accept policies and filters. -- v79 : 05/20/98 - Added rcPortAutoNegotiationSupported. -- Added rcIpConfGlobalRipHoldDownTime -- v80 : 05/11/98 - modified ospfIfAuthKey SYNTAX in rcIpConfOsptTable. -- added rcIpConfOspfSpfHoldDownTime to rcIpConfOspf grp -- added rcIpConfOspfIfAreaId to rcIpConfOspfTable. -- v81 : 05/27/98 - Added rcChasAruMode. -- Added rcPortSingleRoutablePort. -- Deprecated rcPortPerformRouting. -- Deprecated rcVlanRoutingEnable. -- v82 : 05/29/98 - Added error codes for mlt. -- Added Default values in rcRipExtEntry & rcArpExtEntry. -- v83 : 06/01/98 - Added rcIpConfDhcpAlwaysBroadcast. -- v84 : 06/03/98 - Added rcIpVrrp group. -- v85 : 06/03/98 - Added rcIpConfOspfAreaTable. -- v86 : 06/04/98 - Enhancement in rcVlanTable and -- rcVlanIgmpSnoopStaticTable. -- v87 : 06/05/98 - Removed rcIpVrrp group. -- v88 : 06/12/98 - Added rcVlanSnoopActiveQuerier, -- rcVlanSnoopMRouterExpiration in rcVlan table. -- Added rcMltEnable, rcMltLoadBalance, -- rcMltDistributionAlgorithm in rcMlt table. -- v89 : 06/17/98 - Changed rcVlanSnoopActiveMRouterPorts, -- rcVlanSnoopActiveQuerier, and -- rcVlanSnoopMRouterExpiration to -- rcVlanIgmpSnoopActiveMRouterPorts, -- rcVlanIgmpSnoopActiveMRouterPorts, and -- rcVlanIgmpSnoopMRouterExpiration respectively. -- v90 : 06/12/98 - Added rcIpConfRipAutoAggrerateEnable, -- added additional error codes for route aggregation. -- v91 : 06/29/98 - Added new trap rcLinkOscillation. -- v92 : 07/01/98 - Added rcSyslog. -- v93 : 07/08/98 - Added rcVlanIgmpSnoopAccessTable. -- v94 : 07/09/98 - Added rcChasPowerSupplyDetailTable. -- v95 : 07/14/98 - Added rcVlanIgmpSnoopQuerierPort. -- v96 : 07/17/98 - Added additional error codes. -- v97 : 07/20/98 - Added rcIpFilterMode and rcIpFilterPortDefaultAction. -- Added rcMltIfIndex. -- Obsoleted rcIpFilterPortMode. -- Added rcDiag group. -- v98 : 07/21/98 - Modified the rcIpPolicy group. -- v99 : 07/24/98 - Added description for Syslog group. -- v100 : 07/24/98 - Added a new card type rc8x10BaseFBB. -- v101 : 07/29/98 - Added rcIpConfRipGenerateDefaultRoute. -- - Added triggerRipUpdate to rcVlanAction. -- v102 : 07/30/98 - Changed rcSysAccessPolicyActive to -- rcSysAccessPolicyPolicyEnable. -- v103 : 07/30/98 - modified the policy table index variable ACCESS -- to read-only. -- v104 : 08/04/98 - Added rc10BaseF to rcPortType. -- v105 : 08/11/98 - Changed range of rcMltId. -- v106 : 08/24/98 - Changed the option definition of rcSyslogHostModuleId -- in hexdecimal. -- v107 : 08/28/98 - Added flushSnoopMRtr to rcVlanAction. -- v108 : 08/28/98 - Backed out changes made in v106. -- v109 : 08/25/98 - Changed name size in policy & ip filter tables. -- v110 : 09/01/98 - Added rcStgNotAllowedPorts to rcStg group. -- v111 : 09/28/98 - Changed rcVlanIgmpSnoopAccessMode options. -- Added rcPortPerformMacLearning for rcPortTable. -- v112 : 10/01/98 - Add rcIpxAddrTbl -- v113 : 10/06/98 - Added rcIpDvmrp. Added rcIpConfIgmpRobustness -- and rcIpConfIgmpLastMemberQueryInterval -- v114 : 10/06/98 - Added rc4xOC3, rc1xOC12, and rcRMON card types. -- v115 : 10/06/98 - Changed rcIpDvmrp table to rcIpConfDvmrpTable. -- v116 : 09/29/98 - Added new items to rcIpFilter group. -- v117 : 10/01/98 - Changed rcPortPerformMacLearning to read-write. -- v118 : 10/07/98 - Changed rcPortPerformMacLearning to -- rcPortUnknownMacDiscard. -- v119 : 09/29/98 - Merged rcIpFilter group from rel1.3. -- Added more rcError items. -- v120 : 10/15/98 - Added to "rarp" to rcVlanProtocolId. -- v121 : 10/15/98 - Add rcIpDvmrpEnable into rcIpDvmrp. -- v122 : 10/15/98 - Changed the range of rcIpConfIgmpRobustness. -- v123 : 10/20/98 - Added rcStatMlt group. -- v124 : 10/21/98 - Removed rcIpConfIgmp group. -- v125 : 10/27/98 - Added rcChasEnableEOCMode, rcPortPerformMacLearning -- and rcError 323. -- v126 : 10/12/98 - added rcIpUdpProtocolTable, rcIpUdpPortFwdTable, -- rcIpUdpPortFwdListTable, rcIpUdpConfBroadcastIntfTable. -- v127 : 10/30/98 - Added rcVlanIgmpSnoopSenderTable. -- v128 : 11/02/98 - Added AuthType field to rcIpConfOspfTable. -- v129 : 11/03/98 - Changed the index keys of rcipIgmpGroupTable. -- v130 : 11/05/98 - Added enum none(0) to rcVlanIgmpSnoopSenderAction. -- v131 : 11/05/98 - Added rcChasEocModeAdminStatus and -- rcChasEocModeOperStatus. Deleted rcChasEnableEOCMode. -- v132 : 11/10/98 - Changed rcChasEocModeAdminStatus to read-write and -- rcChasEocModeOperStatus to read-only. -- Changed aruMixed of rcChasAruMode to aruThree. -- v133 : 11/11/98 - Added PerformTagging into rcVlanPortTable. -- v134 : 11/12/98 - Added range limit for rcIpConfigDvmrpTableMetric. -- v135 : 11/16/98 - Added rcPortNumStateTransition in rcPort. -- v136 : 11/20/98 - added rcIpConfAdvertiseWhenDown to rcIpConfTable. -- added additional error codes. -- v137 : 11/23/98 - Added new items in rcIpDvmrp and rcIpConfIgmpTable. -- v138 : 11/24/98 - Added interger range for UpdateInterval, -- TriggeredUpdateInterval, LeafTimeout, NbrTimeout, -- and NbrProbeInterval in rcIpConfIgmpTable. -- v139 : 12/03/98 - Re-built rcIpDvmrp, rcIpDvmrpGlobal & rcIpDvmrpTable. -- v140 : 12/08/98 - Added IpTosRule under rcIpFilterTable. Added -- rcIpRosRule group with AndMask, OrRule1, OrRule2, -- OrRule3. -- v141 : 01/13/99 - Added return code 345 to 364 into rcErrorReturnCode. -- v142 : 02/01/99 - modified udp protocol port number range. -- v143 : 03/02/99 - Added static routing group. -- v144 : 03/04/99 - Added rcPos group. -- v145 : 03/04/99 - Fixed access error for rcPosPppIpxIfIndex. -- v146 : 03/08/99 - New return error message for rcDiag. -- v147 : 03/08/99 - New return error message for static routing. -- v148 : 03/09/99 - Added rcHprm group. -- v149 : 03/16/99 - Added rcIpPim group. -- v150 : 03/16/99 - Removed rcIpPimGlobalJoinPruneInterval. -- v151 : 04/12/99 - modified rcHprm group. -- v152 : 04/13/99 - Added Accelar740 and Accelar750 devices. -- v153 : 04/14/99 - Added rmon history utilization ccalculation ontrol. -- v154 : 04/20/99 - Added rcLinkFlapDetect, rcPortAllowOverSizeFrame, -- rcIpTosRule, rcBridgeUnknownMacDiscard, -- rcBridgeManualEdit and rcBridgeAutoLearn. -- v155 : 04/26/99 - Added Accelar790. -- v156 : 04/27/99 - Modified rcHprm. -- v157 : 05/17/99 - Added rcIpConfDirectBroadcastEnable. -- Added rcMacViolation trap. -- v158 : 05/17/99 - Added rcAgentTable. -- v159 : 05/17/99 - Added rcBridgeStaticMulticastTable. -- v160 : 05/19/99 - Added rcSysCommReadWriteLayer1. -- v161 : 06/17/99 - Changed rcBridgeStaticMulticastForwardingPorts -- to writable. -- v162 : 06/29/99 - Added OC3 and OC12 card types to A1200. -- v163 : 06/30/99 - Added rcIpMulticastArpTable. Removed -- rcBridgeStaticMulticastForwardingPorts from -- rcBridgeStaticMulticastTable index. -- v164 : 07/08/99 - Added rcSysDiagnosticsEnable. -- v165 : 07/12/99 - Added Mib descriptions for the unknown mac discard table, the Auto -- Learn table, and the Manual Edit table. -- -- ****************************************************************** -- Accelar 1000 Product Family : Rel2.2.0 -- ****************************************************************** -- -- v166 : 08/29/99 - Added rcV1Traps group (for BayStack). -- v167 : 08/30/99 - Added rcSysDramSize, DramUsed, DramFree, -- DramMaxBlockFree. -- v168 : 08/30/99 - Added Radius Global group and Radius Server Table. -- v169 : 08/30/99 - Added rcPos group. -- Added rcIpConfV2Table, rcIpConfOspfV2Table, -- rcArpExtV2Table, rcRipExtV2Table, -- rcStatOspfIfV2Table, and rcIpMulticastTable. -- -- ****************************************************************** -- Accelar 8000 Product Family : Rel3.0.0 -- ****************************************************************** -- -- v260 : 11/03/98 - Added changes to support Raptillion (Accelar2k) -- Added rc2k24x100BaseTX and rc2k24x100BaseFX cards. -- Added rcAccelar2kChasPortOperStatus. -- v261 : 12/09/98 - Updated rcCardType to use Accelar2k card encoding -- scheme. -- v262 : 12/11/98 - Updated rcChasType to use Accelar2k encoding. -- v263 : 01/05/99 - Renamed rcAccelar2k group to rc2k. -- v264 : 01/28/99 - Added rc2kCpuEthernetPortTable, -- rc2kCpuSerialPortTable, rc2kDevice, -- rc2kBootConfig, and rc2kCardTable. -- v265 : 02/01/99 - Added more items in rc2kBootConfig. -- v266 : 02/25/99 - Changed the value range of rcChasPowerSupplyId. -- v267 : 03/03/99 - Added rc2kDevicePcmciaPresent. -- v268 : 03/05/99 - Added static route table. -- Modified rcIpUpdPortFwdListId range. -- v269 : 03/15/99 - Changed rcStgPortMembers to allow more ports. -- v270 : 03/18/99 - Added more variables in rc2kCardBackType. -- v271 : 03/25/99 - Added rc2kChassisAmbientLowerTemperature and -- rc2kChassisAmbientUpperTemperature. -- v272 : 03/26/99 - Added rc2kTemperature trap. -- v273 : 04/07/99 - Added error return messages for static routing -- and 2k copy file. -- v274 : 04/07/99 - Added err rtrn msg copyFileInvalidMultipleCopying -- v275 : 04/08/99 - Changed QosLevel to UserPriority. -- v276 : 04/30/99 - Changed UserPriority back to QosLeve. -- Added more items in rcIpFilterTable. -- Added rc2kQos group. -- v277 : 05/13/99 - Updated rc2k mibs to support multiple CPUs. -- Updated all QosLevel variables to be (1..8). -- Added rcVlanTosValue to rcVlan group. -- v278 : 05/14/99 - Merged the rcLinkFlapDetect group from accelar1k. -- v279 : 05/26/99 - Added rc2kMdaCardTable. -- v280 : 05/26/99 - Changed rcVlanPortVlanIds and rcMltVlanIds to 4096. -- v281 : 06/07/99 - Changed in rc2kQosQosTable. -- v282 : 07/13/99 - Removed resetWebCounters from rcSysAction. -- Modified rcWeb group. -- v283 : 07/15/99 - Added default values for rcIpFilterTable and -- rc2kQosTrafficProfileTable. -- Changed rcVlanPortDefaultVlanId to (0..4094). -- Added rcIpFilterStopOnMatch. -- Deprecated rcVlanHighPriority, rcVlanRoutingEnable, -- rcPortHighPriority, rcPortUserPriority, -- rcBridgeFdbPriority, rcBridgeStaticPriority, -- rcIpTosRule, rcIpFilterHighPriority -- rcIpFilterCopyToCpu, rcIpFilterUsePktLimit -- rcIpFilterPktLimit, rcIpFilterIpTosRule. -- v284 : 07/16/99 Added rcDiagDiagnosticsEnable in rcDiag group. -- v285 : 07/16/99 Made DisplayString range and integer range for -- rcWeb objects. -- Excluded rc2kCardFrontMacAddr. -- v286 : 07/29/99 Increased rcMltId from 8 to 32. -- v287 : 08/02/99 Changed number for rcMdaCardType. -- Changed chassis type from 2400/2450 to 8010/8006. -- v288 : 08/10/99 Added rc2kMGSFM. -- v289 : 08/20/99 Added rcChasGlobalFilterEnable, rcChasVlanBySrcMacEnable. -- Added rc2kBootConfigSwVersion. -- v290 : 09/07/99 Added rc2k8x1000BaseIC, rc2k8x1000BaseTX, -- rc2k16x1000BaseSXBB in rc2kCardFrontType. -- v291 : 09/10/99 Added rc2k8xATM in rc2kCardFrontType. -- v292 : 09/22/99 Added rcPortVendorDescr, and rcGbicLx, rcGbicSx, -- rcGbicXd, rcGbicCu, rcGbicOther to rcPortType. -- v293 : 09/23/99 Changed trap numbering. -- v294 : 09/23/99 Added rcA8600, rcA8650, rcA8100, rcA8150. -- Added rcChasFanAmbientTemperature. -- v295 : 10/11/99 Increased rcStatMltxxx ranges from (1..8) to (1..32). -- v296 : 10/15/99 Added rc2kQosQosName in rc2kQosTable. -- Changed rcIpFilterId ranges fr (1..1024) to (1..4096). -- v297 : 10/11/99 Changed rc2kQosQosName to read-only. -- v298 : 10/06/99 Removed rcDiagDiagnosticsEnable and rcDiagSaveConfig -- from rcDiag group. -- v299 : 10/20/99 Changed QosLevel to (0..7) from (1..8). Added QosRow -- to QOS tables as index. Changed rcVlanQosLevel, -- rcPortQosLevel, rcBridgeFdbQosLevel, and -- rcBridgeStaticQosLevel to (0..7). Added new Enable -- variables for rcIpFilterDiffServMatch and -- rcIpFilterDiffServModify variables. Changed range of -- rcIpFilterDiffServMatch and rcIpFilterDiffServModify -- to (0..7). -- v300 : 10/22/99 Added new rcErrorReturnCode from 397 to 404. -- v301 : 11/05/99 Added rcStatBridgeOutFrames. -- v302 : 11/10/99 Added rcA750S sysObjectID. -- Changed all default values for QosLevel from -- 'level2' to 'level1'. -- v303 : 11/07/99 Added more rcPortType for oc3c, oc12c, ds3, and e3. -- v304 : 12/02/99 Changed group name rcHprm to rcOrna. -- v305 : 12/15/99 Added rc2kChassisMgmtMacAddr. -- v306 : 12/17/99 Added rcGbicNone(22) to the rcPortType. -- v307 : 12/20/99 Changed rc2kChassisMgmtMacAddr to -- rc2kCpuEthernetPortMgmtMacAddr. -- v308 : 12/21/99 Removed rcSysGlobalFilterEnable and -- rcSysVlanBySrcMacEnable. -- Added nre error return code 405 and 406. -- Added rc2kMg8x1000BaseIC in rc2kCardFrontType. -- v309 : 12/24/99 Added mltMoreThan4PortsInMgMlt(408), -- protocolRulesForThePortHasExceeded16(409) in -- rcErrorReturnCode. -- v310 : 12/26/99 Added 9 more variables in rc2kAtm1483ElanTable. -- v311 : 12/28/99 Added rc2kCardASICDescr. -- v312 : 12/29/99 Added ATM MDA card types. -- Added rc2kCardFrontMasterIO. -- v313 : 01/10/00 Added rcStgPortStpState. -- v314 : 01/21/00 Added rc1000BaseTx in rcPortType. -- Changed rc2kMg16x100BaseTX to rc2kMg16x100BaseFX. -- v315 : 01/26/00 Added rc2k16x1000BaseIC. -- v316 : 02/01/00 Added 4 rc2kMdaCardType for POS. -- v317 : 02/02/00 Added rcIpConfIgmpAdminVersion. -- v318 : 02/08/00 Added rc2k6xPOS in rc2kCardFrontType. -- v319 : 02/28/00 Changed rc2k8x1000BaseTX to rc2k8x1000BaseT. -- v320 : 03/01/00 Added rcStatMulticast Group. -- -- ****************************************************************** -- Accelar 8000 Product Family : Rel3.1.0 -- ****************************************************************** -- -- v400 : 03/22/00 Changed lay-out of rc2kAtmSvcTable. -- v401 : 04/05/00 Updated rcErrorReturnCode with newest values. -- v402 : 04/14/00 Merged additions from REL3_POS_BRANCH branch. -- Added rcStatPos, rcSonetTrap. -- Updated rcPos group. -- v403 : 04/14/00 Merged additions from REL3_ATM2_BRANCH branch. -- Changed lay-out of rc2kAtmSvcTable. -- v404 : 05/10/00 Added rcRateLimitTable. -- v405 : 05/16/00 Port UnknownMacDiscardTable, ManualEditTable, -- AutoLearnTable. Exclude priority and monitor -- in the table. -- v406 : 05/16/00 Ported rcIpConfGlobalIcmpNetUnreach. -- v407 : 05/18/00 - Added rcIpFilterNextHopForwardIpAddr, -- rcIpFilterNextHopForwardEnable. -- v408 : 05/23/00 - Added rcIgmpInterfaceExtnTable, rcIpConfIgmpSnoopEnable -- rcIpConfIgmpProxySnoopEnable, rcIgmpStaticTable, -- rcIgmpAccessTable, rcIgmpSenderTable. -- v409 : 05/23/00 - Added rc2kMg48x100BaseTC. -- v410 : 05/23/00 - Added rc2kAtm1483ElanStgId, rc2kAtm1483ElanrcStgTaggedBpduVlanId -- rc2kAtmLecElanStgId, rc2kAtmLecElanrcStgTaggedBpduVlanId. -- v411 : 05/31/00 - Added forwardToNextHop in rcIpFilterMode, changed -- rcIpFilterNextHopForwardEnable to rcIpFilterNextHopUnreachableDropEnable. -- v412 : 05/31/00 - Rewrite the rcOrna mib. -- v413 : 06/02/00 - Add rcUserSetTime. -- v414 : 06/13/00 - Added rcIgmpInterfaceExtnMrdiscEnable. -- v415 : 06/16/00 - Added rcBridgeUnknownMacDiscardMacCountMax, -- rcBridgeUnknownMacDiscardMacCountCur. -- v416 : 06/28/00 - Expanded rcPortType to have seperateocs and oc12 for Atm and Pos. -- Added two more error code. -- v417 : 07/04/00 - Replace ElanId by VlanId for rc2kAtmLecElanTable. -- v418 : 07/13/00 - Clean up rcPortType, removed unused and unwanted type -- includes rcPosMMF, rcPosSMF, rcAtm, rcOc3cSM, rcOc3cMM, -- rcOc3cCOPPER, rcOc12cSM, rcOc12cMM, rcDs3, rcE3. -- v419 : 07/20/00 - Added rcRateLimitIfAllowedRatePps for rcRateLimitTable. -- v420 : 07/21/00 - Rewrite rcPortType so it is commpatible with rel3.0. -- v421 : 07/21/00 - Add rcSysVirtualIpAddr, rcSysVirtualNetMask. -- v422 : 07/21/00 - Modified rc2kAtm1483ElanTable, index changed from ElanId to VlanId. -- v423 : 07/23/00 - Added rcIgmpInterfaceExtnDiscoveredRouterPorts, -- rcIgmpInterfaceExtnSnoopMRouterExpiration, -- rcIgmpInterfaceExtnSnoopActiveMRouterPorts, -- rcIgmpInterfaceExtnSnoopMRouterPorts in the rcIgmpInterfaceExtTable. -- v424 : 08/02/00 - Add rcIpConfOspfAreaAggregateTable. -- v425 : 08/04/00 - Add rcIpStaticRouteLocalNextHop in rcIpStaticRouteTable. -- v426 : 08/04/00 - Modified error return code. -- v427 : 08/01/00 - Changed the rc2KDeviceFlashFileName, -- rc2KDevicePcmciaFileName, -- rcDeviceConfigSourceFileName, -- rcDeviceTertiarySourceFileName, -- rc2SysConfigFileName to the length of 256 characters long. -- v428 : 08/03/00 - Modified rc2kAtmLecElanTable, index changed from -- ElanId to VlanId. -- v429 : 08/08/00 - Added rcIgmpAccessHostMask in rcIgmpAccessTable. -- v430 : 08/17/00 - Added pos error return code. -- v431 : 08/17/00 - Modified rc2kAtmPortTable, and rc2kAtmPvcTable. -- v432 : 08/17/00 - Took out other option for rc2kAtmPortClockSource. -- v433 : 08/22/00 - Added rc2kAtmSioCardConfigTable. -- v434 : 08/22/00 - Changed rcPosSioCardConfigImageFileName to read-only. -- v435 : 09/21/00 - Added rcWebHttpPort, and new error message. -- v436 : 10/02/00 - Enable rcSysRmonUtilizationMethod, disable -- rcSysRmonSaveConfig. -- v437 : 10/04/00 - Changed rc2kQosTrafficProfileEnable default value -- to false. -- v438 : 10/11/00 - Remove entries from rc2kAtmPortTable, rc2kAtmPortSignalingEnable -- rc2kAtmPortUniVersion, rc2kAtmPortVpi, rc2kAtmPortSignalingStatus -- rc2kAtmLecElanTable - entire table -- rc2kAtmPvcStatTable - entire table -- rc2kAtmSvcTable - entire table (current build b34) -- Changed range and default value for rc2kAtmPvcPeakCellRate and -- rc2kAtmPvcSustainedCellRate. -- v439 : 10/17/00 - Add pos and multicast error return code. -- v440 : 12/21/00 - Add port route feature error return code. Add rc2kCpuEthernetPortRouteTable. -- v441 : 01/11/00 - Modified rc2kAtmPortNumVpiBits,rc2kAtmPvcPeakCellRate, -- rc2kAtmPvcSustainedCellRate descriptions. -- v442 : 01/17/00 - Add rcIpAdEntMacOffset, and error code for this variable -- v443 : 01/25/00 - Add more error code -- v444 : 04/05/01 - Added rcStgPortChangeDetection. -- v444 : 03/15/00 - rel3.1.1.1 release starts here. -- v445 : 03/03/01 - Add new trap rc2kAtmPvcLinkStateChange -- Add rc2kAtmPvcOamLbMgmtEnable -- rc2kAtmPvcOamLbSendFrequency -- rc2kAtmPvcOamLbRetryFrequency -- rc2kAtmPvcOamLbUpCount -- rc2kAtmPvcOamLbDownCount -- rc2kAtmPvcOamTrapEnable -- rc2kAtmPvcOamVcStatus -- v446 : 04/18/01 - changed rc2kBootConfigSlot from 3 to 6 -- -- -- ISSUES -- -- None outstanding IMPORTS MODULE-IDENTITY FROM SNMPv2-SMI -- TEXTUAL-CONVENTION FROM SNMPv2-TC enterprises, IpAddress, TimeTicks FROM RFC1155-SMI Counter FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC1213-MIB RowStatus, TruthValue, MacAddress FROM SNMPv2-TC Gauge32, NOTIFICATION-TYPE FROM SNMPv2-SMI Counter32, Counter64 FROM SNMPv2-SMI AtmAddr FROM ATM-TC-MIB; rapidCity MODULE-IDENTITY LAST-UPDATED "9701010000Z" ORGANIZATION "Bay Networks, Rapid-City Group" CONTACT-INFO " Edwin Tsang Postal: Bay Networks, Inc. 4401 Great America Parkway Santa Clara, CA 95052-8185 Tel: 408-495-6159 Fax: 408-495-5215 E-mail: edwin_tsang@baynetworks.com " DESCRIPTION "Enterprise MIB for the Accelar product family." ::= { enterprises 2272 } -- -- Local defines to avoid having to pull-in other RFC's. -- BridgeId ::= OCTET STRING (SIZE (8)) Timeout ::= INTEGER EnableValue ::= INTEGER { enable(1), disable(2) } -- -- This variable type is used through out the Rapid-City enterprise -- MIB to denote the standard ifIndex in mib-2. -- InterfaceIndex ::= INTEGER -- -- The string is 88 octets long, for a total of 704 bits. Each bit -- corresponds to a port, as represented by its ifIndex value . When a -- bit has the value one(1), the corresponding port is a member of the -- set. When a bit has the value zero(0), the corresponding port is not -- a member of the set. The encoding is such that the most significant -- bit of octet #1 corresponds to ifIndex 0, while the least significant -- bit of octet #88 corresponds to ifIndex 703." -- PortSet ::= OCTET STRING (SIZE (88)) IdList ::= OCTET STRING -- -- Additions to resolve some SNMP V2 dependencies so we don't -- have to pull-in a lot of mib modules. -- internet OBJECT IDENTIFIER ::= { iso org(3) dod(6) 1 } snmpV2 OBJECT IDENTIFIER ::= { internet 6 } snmpModules OBJECT IDENTIFIER ::= { snmpV2 3 } snmpMIB OBJECT IDENTIFIER ::= { snmpModules 1 } snmpMIBObjects OBJECT IDENTIFIER ::= { snmpMIB 1 } snmpTraps OBJECT IDENTIFIER ::= { snmpMIBObjects 5 } -- -- Enterprise specific MIB groups -- rcMgmt OBJECT IDENTIFIER ::= { rapidCity 1 } rcA1100 OBJECT IDENTIFIER ::= { rapidCity 2 } rcA1250 OBJECT IDENTIFIER ::= { rapidCity 6 } rcA1150 OBJECT IDENTIFIER ::= { rapidCity 7 } rcA1200 OBJECT IDENTIFIER ::= { rapidCity 8 } rcA1050 OBJECT IDENTIFIER ::= { rapidCity 9 } rcA740 OBJECT IDENTIFIER ::= { rapidCity 20 } rcA750 OBJECT IDENTIFIER ::= { rapidCity 21 } rcA790 OBJECT IDENTIFIER ::= { rapidCity 22 } rcA750S OBJECT IDENTIFIER ::= { rapidCity 23 } rcA8003 OBJECT IDENTIFIER ::= { rapidCity 280887555 } rcA8006 OBJECT IDENTIFIER ::= { rapidCity 280887558 } rcA8010 OBJECT IDENTIFIER ::= { rapidCity 280887562 } rcA8010co OBJECT IDENTIFIER ::= { rapidCity 1623064842 } rcA8610 OBJECT IDENTIFIER ::= { rapidCity 30 } rcA8606 OBJECT IDENTIFIER ::= { rapidCity 31 } rcA8110 OBJECT IDENTIFIER ::= { rapidCity 32 } rcA8106 OBJECT IDENTIFIER ::= { rapidCity 33 } rcA8603 OBJECT IDENTIFIER ::= { rapidCity 34 } rcA8103 OBJECT IDENTIFIER ::= { rapidCity 35 } rcA8110co OBJECT IDENTIFIER ::= { rapidCity 36 } rcA8610co OBJECT IDENTIFIER ::= { rapidCity 37 } rcSystem OBJECT IDENTIFIER ::= { rcMgmt 1 } rcTftp OBJECT IDENTIFIER ::= { rcMgmt 2 } rcVlan OBJECT IDENTIFIER ::= { rcMgmt 3 } rcChassis OBJECT IDENTIFIER ::= { rcMgmt 4 } rcMirror OBJECT IDENTIFIER ::= { rcMgmt 5 } rcDipSwitch OBJECT IDENTIFIER ::= { rcMgmt 6 } rcTblSize OBJECT IDENTIFIER ::= { rcMgmt 7 } rcIp OBJECT IDENTIFIER ::= { rcMgmt 8 } rcArp OBJECT IDENTIFIER ::= { rcMgmt 9 } rcRip OBJECT IDENTIFIER ::= { rcMgmt 10 } rcTest OBJECT IDENTIFIER ::= { rcMgmt 11 } rcStat OBJECT IDENTIFIER ::= { rcMgmt 12 } rcStg OBJECT IDENTIFIER ::= { rcMgmt 13 } rcBridge OBJECT IDENTIFIER ::= { rcMgmt 14 } rcBoot OBJECT IDENTIFIER ::= { rcMgmt 15 } rcDevice OBJECT IDENTIFIER ::= { rcMgmt 16 } rcMlt OBJECT IDENTIFIER ::= { rcMgmt 17 } rcWeb OBJECT IDENTIFIER ::= { rcMgmt 18 } rcCli OBJECT IDENTIFIER ::= { rcMgmt 19 } rcError OBJECT IDENTIFIER ::= { rcMgmt 20 } rcTraps OBJECT IDENTIFIER ::= { rcMgmt 21 } rcSyslog OBJECT IDENTIFIER ::= { rcMgmt 22 } rcDiag OBJECT IDENTIFIER ::= { rcMgmt 23 } rcIpx OBJECT IDENTIFIER ::= { rcMgmt 24 } rcOrna OBJECT IDENTIFIER ::= { rcMgmt 25 } rcPos OBJECT IDENTIFIER ::= { rcMgmt 26 } rcLinkFlapDetect OBJECT IDENTIFIER ::= { rcMgmt 27 } rcV1Traps OBJECT IDENTIFIER ::= { rcMgmt 28 } rcRadius OBJECT IDENTIFIER ::= { rcMgmt 29 } rcIgmp OBJECT IDENTIFIER ::= { rcMgmt 30 } rcUserSetTime OBJECT IDENTIFIER ::= { rcMgmt 31 } rc2k OBJECT IDENTIFIER ::= { rcMgmt 100 } -- LOGICAL (System) Elements rcSysIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "This entity's IP address." ::= { rcSystem 1 } rcSysNetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "This entity's subnet mask." ::= { rcSystem 2 } rcSysBroadcast OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "This entity's broadcast address." ::= { rcSystem 3 } -- Community Strings rcSysCommReadWriteAll OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "When an SNMP message is received by this entity, the community string in the message is compared with this string first. If it matches, read-write access is granted to all items in the MIB. If it doesn't match, the rcSysCommReadWrite string is compared next." ::= { rcSystem 4 } rcSysCommReadWrite OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "When an SNMP message is received by this entity, the community string in the message is compared with this string second. If it matches, read-write access is granted to all items in the MIB except community strings. (Community strings appear empty when read and return a no such name error when an attempt is made to write them.) If it doesn't match, the rcSysCommReadWriteLayer3 string is compared next." ::= { rcSystem 5 } rcSysCommReadOnly OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "When an SNMP message is received by this entity, the community string in the message is compared with this string third. If it matches, read-only access is granted to all items in the MIB except community strings. (Community strings appear empty when read.) If it doesn't match, no access is granted, no response is sent back to the SNMP requester, and SNMP traps are sent to the SNMP trap receiver(s) if configured." ::= { rcSystem 6 } -- Other rcSysVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "Software version running on device" ::= { rcSystem 7 } rcSysAction OBJECT-TYPE SYNTAX INTEGER { none(1), -- none of the following hardReset(2), -- power on tests softReset(3), -- reset w/o power on tests saveToNVRAM(4), -- save current config to NVRAM resetCounters(5), -- reset all statistic counters saveToStandbyNVRAM(6), -- save config to slave NVRAM cpuSwitchOver(7), -- CPU board switch-over checkSwInFlash(8), checkSwInPcmcia(9), resetConsole(10), resetModem(11), flushIpRouteTbl(12), saveRuntimeConfig(13), -- 8k only saveRuntimeConfigToSlave(14), -- 8k only saveBootConfig(15), -- 8k only saveSlaveBootConfig(16) -- 8k only -- reserve(17) -- reserve(18) -- reserve(19) -- reserve(20) -- reserve(21) } ACCESS read-write STATUS mandatory DESCRIPTION "Initiate a system action." DEFVAL { none } ::= { rcSystem 8 } rcSysResult OBJECT-TYPE SYNTAX INTEGER { none(1), -- none of the following inProgress(2), -- in progress success(3), -- success fail(4), -- failure flashReadFailed(5), -- could not read from flash pcmciaReadFailed(6), -- could not read from pcmcia crcCheckFailed(7), noStandbyCpu(8) } ACCESS read-only STATUS mandatory DESCRIPTION "Result from the last system action." DEFVAL { none } ::= { rcSystem 9 } rcSysLastChange OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Last management initiated configuration change since sysUpTime." ::= { rcSystem 10 } rcSysLastVlanChange OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Last management initiated VLAN configuration change since sysUpTime." ::= { rcSystem 11 } rcSysLastStatisticsReset OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Last management initiated statistics reset since sysUpTime." ::= { rcSystem 12 } -- Global Statistics rcSysBufferUtil OBJECT-TYPE SYNTAX INTEGER (0..100) ACCESS read-only STATUS mandatory DESCRIPTION "Buffer utilization as a percentage of the total amount of buffer space in the system. A high value indicates congestion." ::= { rcSystem 13 } rcSysBufferUtilPeak OBJECT-TYPE SYNTAX INTEGER (0..100) ACCESS read-only STATUS mandatory DESCRIPTION "The largest buffer utilization since sysUpTime" ::= { rcSystem 14 } rcSysBufferUtilPeakTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Timestamp for rcSysPeakBandwidth" ::= { rcSystem 15 } rcSysNVRamSize OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "Total Non-volatile RAM in Kbytes" ::= { rcSystem 16 } rcSysNVRamUsed OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "Non-volatile RAM in use in Kbytes" ::= { rcSystem 17 } rcSysLastSaveToNVRam OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "SysUpTime of the last time when NVRAM was written to. This could be a save of the system configuration or via a file transfer of a configuration file." ::= { rcSystem 18 } rcSysLastSaveToStandbyNVRam OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "SysUpTime of the last time when the standby NVRAM (on the back-up CPU board) was written to." ::= { rcSystem 19 } rcSysCpuUtil OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "Percentage of CPU utilization" ::= { rcSystem 20 } rcSysSwitchFabricUtil OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "Percentage of Switching Fabric utilization" ::= { rcSystem 21 } rcSysRmonMemSize OBJECT-TYPE SYNTAX INTEGER (250000..4000000) ACCESS read-write STATUS mandatory DESCRIPTION "Amount of RAM in bytes to allocate for RMON to use when rcSysRmonEnable is TRUE." ::= { rcSystem 22 } rcSysRmonEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Control whether the RMON feature should be enabled. To enable the RMON feature, set this variable to true. The RMON agent in the device will get started immediately if the amount of memory specified by rcSysRmonMemSize is currently available in the device. To disable the RMON feature, set this variable to false, save the new setting to NVRAM, and reboot the device. After the device is rebooted the RMON agent will not be operational." ::= { rcSystem 23 } rcSysRmonSaveConfig OBJECT-TYPE --exclude for rel3.1 SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Control whether RMON configuration information should be saved to NVRAM so RMON settings can be automatically reinstalled after a system reboot. Setting rcSysRmonSaveConfig to true does not immediately save the configuration information. The save happens when the rcSysAction variable is set to 'saveToNVRAM(4)'. This option is only meaningful when the rcSysRmonEnable variable is set to true." ::= { rcSystem 24 } rcSysRmonTrapOption OBJECT-TYPE SYNTAX INTEGER { toOwner(1), toAll(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate whether RMON traps should be sent to only the owner of the RMON alarm (i.e., the manager that created the alarm entry) or all trap recipients in the system trap receiver table." DEFVAL { toOwner } ::= { rcSystem 25 } rcSysSupportRouting OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate whether routing is supported in this product." ::= { rcSystem 26 } rcSysSupportWebServer OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate whether WebServer is supported in this product." ::= { rcSystem 27 } rcSysLastIpAddrChange OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Last management initiated IP address change since sysUpTime. Any addition or deletion of an IP address to a single routable port or a VLAN is time-stamped by this variable." ::= { rcSystem 28 } rcSysCommReadWriteLayer3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "When an SNMP message is received by this entity, the community string in the message is compared with this string third. If it matches, read-write access is granted to all Layer-3 items in the MIB except community strings. (Community strings appear empty when read and return a no such name error when an attempt is made to write them.) If it doesn't match, the rcSysCommReadWriteLayer2 string is compared next." ::= { rcSystem 29 } rcSysCommReadWriteLayer2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "When an SNMP message is received by this entity, the community string in the message is compared with this string fourth. If it matches, read-write access is granted to all Layer-2 items in the MIB except community strings. (Community strings appear empty when read and return a no such name error when an attempt is made to write them.) If it doesn't match, the rcSysCommReadOnly string is compared next." ::= { rcSystem 30 } rcSysAccessPolicyEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to configure the system access policy feature. if 'true', the rcSysAccessPolicyTable is examined to determine which packets should be allowed or denied access to this device." DEFVAL { false } ::= { rcSystem 31 } rcSysDefaultRuntimeConfigFileName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "default config." ::= { rcSystem 32 } rcSysDefaultBootConfigFileName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "default boot config." ::= { rcSystem 33 } rcSysConfigFileName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "File name used in conjunction with rcSysAction. If rcSysAction is set to 'saveRuntimeConfig' or 'saveRuntimeConfigToSlave' then this file name will be used instead of the file name specified in rcSysDefaultRuntimeConfigFileName. If rcSysAction is set to 'saveBootConfig' or 'saveBootConfigToSlave' then this file name will be used insteaad of the file name specified in rcSysDefaultBootConfigFileName. If the file name is blank (i.e., nothing is entered) then the default file name will be used." ::= { rcSystem 34 } rcSysLastRunTimeConfigSave OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "SysUpTime of the last time when the run time configuration was written to." ::= { rcSystem 35 } rcSysLastRunTimeConfigSaveToSlave OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "SysUpTime of the last time when the run time configuration was written to slave NVRAM." ::= { rcSystem 36 } rcSysLastBootConfigSave OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "SysUpTime of the last time when the boot configuration was written to." ::= { rcSystem 37 } rcSysLastBootConfigSaveOnSlave OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "SysUpTime of the last time when the boot configuration was written on the slave NVRAM." ::= { rcSystem 38 } rcSysRmonUtilizationMethod OBJECT-TYPE SYNTAX INTEGER { halfDuplex(1), fullDuplex(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to control whether RMON should use a half-duplex or full-duplex formula to calculate port utilization. When set to 'halfDuplex', RMON will use InOctets and the port's speed to calculate port utilization (this is the standard RMON rfc1271 convention). When set to 'fullDuplex', RMON will use InOctets and OutOctets and 2X the port's speed to calculate port utilization. Furthermore, if this variable is set to 'fullDuplex', but the port is operating in a half-duplex mode, the calculation defaults back to the rfc1271 convention." DEFVAL { halfDuplex } ::= { rcSystem 39 } rcSysCommReadWriteLayer1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "read-write L1 access" ::= { rcSystem 40 } rcSysOtherBufferUtil OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "bw currently consumed" ::= { rcSystem 41 } rcSysOtherBufferUtilPeak OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "peak bw since reset" ::= { rcSystem 42 } rcSysOtherBufferUtilPeakTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "timestamp for rcSysPeakBw" ::= { rcSystem 43 } rcSysOtherCpuUtil OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "% cpu utilization" ::= { rcSystem 44 } rcSysOtherSwitchFabricUtil OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "% switch fabric util" ::= { rcSystem 45 } rcSysDramSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Dram size in mega-bytes" ::= { rcSystem 46 } rcSysDramUsed OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "Dram used in percentage" ::= { rcSystem 47 } rcSysDramFree OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Dram free size in kilo-bytes" ::= { rcSystem 48 } rcSysDramMaxBlockFree OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Dram max block free size in kilo-bytes" ::= { rcSystem 49 } rcSysVirtualIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Virtual IP is an IP address that owned and advertised only by the master CPU. So whichever CPU is master registers this IP address. Unlike the management IP address, this address goes in the switch config file and not the boot config" ::= { rcSystem 51 } rcSysVirtualNetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Net mask of the management virtual Ip address" ::= { rcSystem 52 } -- Trap Receiver Table rcSysTrapRecvTable OBJECT-TYPE SYNTAX SEQUENCE OF RcSysTrapRecvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The trap receiver table (0 to 25 entries). This table lists the addresses of Network Management Stations that should receive trap messages from this entity when an exception condition occurs." ::= { rcSystem 60 } rcSysTrapRecvEntry OBJECT-TYPE SYNTAX RcSysTrapRecvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A trap receiver table entry." INDEX { rcSysTrapRecvAddress } ::= { rcSysTrapRecvTable 1 } RcSysTrapRecvEntry ::= SEQUENCE { rcSysTrapRecvAddress IpAddress, rcSysTrapRecvVersion INTEGER, rcSysTrapRecvCommunity DisplayString, rcSysTrapRecvSrcAddress IpAddress, rcSysTrapRecvRowStatus RowStatus } rcSysTrapRecvAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "IP address for trap receiver." ::= { rcSysTrapRecvEntry 1 } rcSysTrapRecvVersion OBJECT-TYPE SYNTAX INTEGER { v1(1), v2c(2) } ACCESS read-write STATUS mandatory DEFVAL { v1 } ::= { rcSysTrapRecvEntry 2 } rcSysTrapRecvCommunity OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "Community string used for trap messages to this trap receiver." ::= { rcSysTrapRecvEntry 3 } rcSysTrapRecvSrcAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Source IP address to use when sending traps. This IP address will be inserted into the source IP address field in the UDP trap packet." ::= { rcSysTrapRecvEntry 4 } rcSysTrapRecvRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Used to create/delete entries" ::= { rcSysTrapRecvEntry 5 } -- Access Policy Table rcSysAccessPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF RcSysAccesspolicyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Management access policy table. This table is used to permit or deny access to this device via the specified source Id." ::= { rcSystem 61 } rcSysAccessPolicyEntry OBJECT-TYPE SYNTAX RcSysAccesspolicyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An access policy table entry." INDEX { rcSysAccessPolicyId } ::= { rcSysAccessPolicyTable 1 } RcSysAccesspolicyEntry ::= SEQUENCE { rcSysAccessPolicyId INTEGER, rcSysAccessPolicyName DisplayString, rcSysAccessPolicyPolicyEnable TruthValue, rcSysAccessPolicyMode INTEGER, rcSysAccessPolicyService INTEGER, rcSysAccessPolicyPrecedence INTEGER, rcSysAccessPolicyNetAddr IpAddress, rcSysAccessPolicyNetMask IpAddress, rcSysAccessPolicyTrustedHostAddr IpAddress, rcSysAccessPolicyTrustedHostUserName DisplayString, rcSysAccessPolicyAccessLevel INTEGER, rcSysAccessPolicyLog TruthValue, rcSysAccessPolicyUsage Counter, rcSysAccessPolicyRowStatus RowStatus } rcSysAccessPolicyId OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Policy Id." ::= { rcSysAccessPolicyEntry 1 } rcSysAccessPolicyName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-write STATUS mandatory DESCRIPTION "Name of this policy." ::= { rcSysAccessPolicyEntry 2 } rcSysAccessPolicyPolicyEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Indicate whether this policy is currently active." DEFVAL { true } ::= { rcSysAccessPolicyEntry 3 } rcSysAccessPolicyMode OBJECT-TYPE SYNTAX INTEGER { allow(1), deny(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate whether a packet having a source IP address that matches this entry should be permitted to enter the device or denied access." DEFVAL { allow } ::= { rcSysAccessPolicyEntry 4 } rcSysAccessPolicyService OBJECT-TYPE SYNTAX INTEGER { telnet(1), snmp(2), tftp(4), ftp(8), http(16), rlogin(32) } ACCESS read-write STATUS mandatory DESCRIPTION "Is represented as bitset to indicate which protocol this entry should be applied to." DEFVAL { snmp } ::= { rcSysAccessPolicyEntry 5 } rcSysAccessPolicyPrecedence OBJECT-TYPE SYNTAX INTEGER (1..128) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate the precedence of this policy. The Lower the number the higher the precedence." DEFVAL { 10 } ::= { rcSysAccessPolicyEntry 6 } rcSysAccessPolicyNetAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Source network IP address." ::= { rcSysAccessPolicyEntry 7 } rcSysAccessPolicyNetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Source network mask." ::= { rcSysAccessPolicyEntry 8 } rcSysAccessPolicyTrustedHostAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Trusted IP address of host performing a rlogin into the device." ::= { rcSysAccessPolicyEntry 9 } rcSysAccessPolicyTrustedHostUserName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) ACCESS read-write STATUS mandatory DESCRIPTION "User name on the trusted host performing a rlogin into the device." ::= { rcSysAccessPolicyEntry 10 } rcSysAccessPolicyAccessLevel OBJECT-TYPE SYNTAX INTEGER { readOnly(1), readWrite(2), readWriteAll(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Access level of trusted host." DEFVAL { readWrite } ::= { rcSysAccessPolicyEntry 11 } rcSysAccessPolicyLog OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate whether logging should be performed if this policy was applied." DEFVAL { false } ::= { rcSysAccessPolicyEntry 12 } rcSysAccessPolicyUsage OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Usage counter" ::= { rcSysAccessPolicyEntry 13 } rcSysAccessPolicyRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Used to create/delete an entry" ::= { rcSysAccessPolicyEntry 14 } -- TFTP Upload/Download rcTftpHost OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Name of source/destination host for the TFTP transfer." ::= { rcTftp 1 } rcTftpFile OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "Name of file for the TFTP transfer." ::= { rcTftp 2 } rcTftpAction OBJECT-TYPE SYNTAX INTEGER { none(1), -- none of the following downloadConfig(2), uploadConfig(3), downloadSwToFlash(4), downloadSwToPcmcia(5), uploadSw(6), downloadSwToDram(7) } ACCESS read-write STATUS mandatory DEFVAL { none } ::= { rcTftp 3 } rcTftpResult OBJECT-TYPE SYNTAX INTEGER { none(1), inProgress(2), noResponse(3), fileAccessError(4), badFlash(5), flashEraseFailed(6), pcmciaEraseFailed(7), success(8), fail(9), writeToNvramFailed(10), flashWriteFailed(11), pcmciaWriteFailed(12), configFileTooBig(13), imageFileTooBig(14), noPcmciaDetect(15), pcmciaNotSupported(16), invalidFile(17), noMemory(18), xferError(19), crcError(20), readNvramFailed(21), pcmciaWriteProtect(22) } ACCESS read-only STATUS mandatory DESCRIPTION "Contains result of the last Tftp action request." ::= { rcTftp 4 } -- VLAN Table rcVlanNumVlans OBJECT-TYPE SYNTAX INTEGER (1..128) ACCESS read-only STATUS mandatory DESCRIPTION "The number of VLANs currently defined in the switch." ::= { rcVlan 1 } rcVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF RcVlanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of Virtual LAN entries. The number of entries is given by rcVlanNumVlans." ::= { rcVlan 2 } rcVlanEntry OBJECT-TYPE SYNTAX RcVlanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing configuration information for a particular Virtual LAN. The relationship between the various port sets in a VLAN Entry are : o The set of ports defined by PortMembers must be a subset of the set of ports in the underlying STG of the VLAN. o The bitwise AND of PortMembers and NotAllowToJoin must be the empty set. o The bitwise OR of PortMembers and NotAllowToJoin must be the set of ports in the underlying STG of the VLAN. o The set of ports defined by StaticMembers must be a subset of the set of ports defined by PortMembers. o The bitwise XOR of PortMembers and StaticMembers defines the set of dynamic (potential) members of the VLAN. o The set of ports defined by ActiveMembers must be a subset of the set of ports defined by PortMembers. " INDEX { rcVlanId } ::= { rcVlanTable 1 } RcVlanEntry ::= SEQUENCE { rcVlanId INTEGER, rcVlanName DisplayString, rcVlanColor INTEGER, rcVlanHighPriority TruthValue, --excluded rcVlanRoutingEnable TruthValue, --excluded rcVlanIfIndex InterfaceIndex, rcVlanAction INTEGER, rcVlanResult INTEGER, rcVlanStgId INTEGER, rcVlanType INTEGER, rcVlanPortMembers PortSet, rcVlanActiveMembers PortSet, rcVlanStaticMembers PortSet, rcVlanNotAllowToJoin PortSet, rcVlanProtocolId INTEGER, rcVlanSubnetAddr IpAddress, rcVlanSubnetMask IpAddress, rcVlanAgingTime INTEGER, rcVlanMacAddress MacAddress, rcVlanRowStatus RowStatus, rcVlanIgmpSnoopEnable TruthValue, --excluded rcVlanIgmpSnoopReportProxyEnable TruthValue, --excluded rcVlanIgmpSnoopRobustness INTEGER, --excluded rcVlanIgmpSnoopQueryInterval INTEGER, --excluded rcVlanIgmpSnoopMRouterPorts PortSet, --excluded rcVlanUserDefinedPid INTEGER, rcVlanIgmpSnoopActiveMRouterPorts PortSet, --excluded rcVlanProtocolIds INTEGER, rcVlanIgmpSnoopActiveQuerier IpAddress, --excluded rcVlanIgmpSnoopMRouterExpiration INTEGER, --excluded rcVlanIgmpSnoopQuerierPort InterfaceIndex, --excluded rcVlanUserPriority INTEGER, rcVlanQosLevel INTEGER, rcVlanTosValue INTEGER } rcVlanId OBJECT-TYPE SYNTAX INTEGER (1..4094) ACCESS read-only STATUS mandatory DESCRIPTION "A value that uniquely identifies the Virtual LAN associated with this entry. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag." ::= { rcVlanEntry 1 } rcVlanName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "An administratively-assigned name for this VLAN." ::= { rcVlanEntry 2 } rcVlanColor OBJECT-TYPE SYNTAX INTEGER (0..32) ACCESS read-write STATUS mandatory DESCRIPTION "An administratively-assigned color code for this VLAN. The value of this object is used by the VLAN Manager GUI tool to select a color when it draws this VLAN on the screen." ::= { rcVlanEntry 3 } rcVlanHighPriority OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS deprecated DESCRIPTION "A flag to note whether frames in this VLAN should be assigned a high switching priority." DEFVAL { false } ::= { rcVlanEntry 4 } rcVlanRoutingEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS deprecated DESCRIPTION "A flag to note whether IP routing is enabled in this VLAN." DEFVAL { false } ::= { rcVlanEntry 5 } rcVlanIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "When rcVlanRoutingEnable is set to true(1), this value indicates the 'logical' ifIndex assigned to this VLAN. Otherwise, this value is meaningless and should be set to zero." ::= { rcVlanEntry 6 } rcVlanAction OBJECT-TYPE SYNTAX INTEGER { none(1), -- none of the following flushMacFdb(2), -- flush MAC forwarding table flushArp(3), -- flush ARP table flushIp(4), -- flush IP route table flushDynMemb(5), -- flush Dynamic Members all(6), -- flush all tables flushSnoopMemb(7), -- flush IGMP Snoop Members triggerRipUpdate(8), -- manually trigger rip update flushSnoopMRtr(9) -- flush snoop multicast router } ACCESS read-write STATUS mandatory DESCRIPTION "VLAN related actions." DEFVAL { none } ::= { rcVlanEntry 7 } rcVlanResult OBJECT-TYPE SYNTAX INTEGER { none(1), -- none of the following inProgress(2), -- in progress success(3), -- success fail(4) -- failure } ACCESS read-only STATUS mandatory DESCRIPTION "The result from the last VLAN action." DEFVAL { none } ::= { rcVlanEntry 8 } rcVlanStgId OBJECT-TYPE SYNTAX INTEGER (0..128) ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the Spanning Tree Group (STG) used by this VLAN to determine the state of its ports. If this VLAN is not associated with any STG, this value should be set to zero." DEFVAL { 1 } ::= { rcVlanEntry 9 } rcVlanType OBJECT-TYPE SYNTAX INTEGER { byPort(1), -- VLAN by Port byIpSubnet(2), -- VLAN by IP subnet byProtocolId(3), -- VLAN by Protocol Id bySrcMac(4), -- VLAN by Src MAC address byDstMcast(5) -- VLAN by Dst MultiCast } ACCESS read-write STATUS mandatory DESCRIPTION "The type of VLAN, distinguished according to the policy used to define its port membership." ::= { rcVlanEntry 10 } rcVlanPortMembers OBJECT-TYPE SYNTAX PortSet ACCESS read-write STATUS mandatory DESCRIPTION "The set of ports that are members (static or dynamic) of this VLAN." ::= { rcVlanEntry 11 } rcVlanActiveMembers OBJECT-TYPE SYNTAX PortSet ACCESS read-only STATUS mandatory DESCRIPTION "The set of ports that are currently active in this VLAN. Active ports include all static ports and any dynamic ports where the VLAN policy was met." ::= { rcVlanEntry 12 } rcVlanStaticMembers OBJECT-TYPE SYNTAX PortSet ACCESS read-write STATUS mandatory DESCRIPTION "The set of ports that are static members of this VLAN. A static member of a VLAN is always active and is never aged out." ::= { rcVlanEntry 13 } rcVlanNotAllowToJoin OBJECT-TYPE SYNTAX PortSet ACCESS read-write STATUS mandatory DESCRIPTION "The set of ports that are not allowed to become members of this VLAN." ::= { rcVlanEntry 14 } rcVlanProtocolId OBJECT-TYPE SYNTAX INTEGER { none(0), ip(1), ipx802dot3(2), ipx802dot2(3), ipxSnap(4), ipxEthernet2(5), appleTalk(6), decLat(7), decOther(8), sna802dot2(9), snaEthernet2(10), netBios(11), xns(12), vines(13), ipV6(14), usrDefined(15), rarp(16) } ACCESS read-write STATUS mandatory DESCRIPTION "The protocol identifier of this VLAN. This value is meaningful only if rcVlanType is equal to byProtocolId(3). For other VLAN types it should have the value none(0)." ::= { rcVlanEntry 15 } rcVlanSubnetAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP subnet address of this VLAN. This value is meaningful only if rcVlanType is equal to byIpSubnet(2). For other VLAN types it should have the value 0.0.0.0." ::= { rcVlanEntry 16 } rcVlanSubnetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP subnet mask of this VLAN. This value is meaningful only if rcVlanType is equal to byIpSubnet(2). For other VLAN types it should have the value 0.0.0.0." ::= { rcVlanEntry 17 } rcVlanAgingTime OBJECT-TYPE SYNTAX INTEGER (10..1000000) ACCESS read-write STATUS mandatory DESCRIPTION "The timeout period (in seconds) used for aging out dynamic members of this VLAN. This field is only relevant for policy-based VLANs." DEFVAL { 600 } ::= { rcVlanEntry 18 } rcVlanMacAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "The MAC address assigned to the virtual router interface of this VLAN. This field is meaningful only if rcVlanRoutingEnable is equal to true(1)." ::= { rcVlanEntry 19 } rcVlanRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Used to create/delete entries in the rcVlanTable." ::= { rcVlanEntry 20 } rcVlanIgmpSnoopEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "A flag to note whether IGMP Snooping is enabled on this VLAN." DEFVAL { false } ::= { rcVlanEntry 21 } rcVlanIgmpSnoopReportProxyEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "A flag to note whether IGMP Report Proxy is enabled on this VLAN." DEFVAL { true } ::= { rcVlanEntry 22 } rcVlanIgmpSnoopRobustness OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "This variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness variable may be increased. IGMP is robust to (Robustness - 1) packet losses." DEFVAL { 2 } ::= { rcVlanEntry 23 } rcVlanIgmpSnoopQueryInterval OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The interval (in seconds) between IGMP Host-Query packets transmitted on this interface." DEFVAL { 125 } ::= { rcVlanEntry 24 } rcVlanIgmpSnoopMRouterPorts OBJECT-TYPE SYNTAX PortSet ACCESS read-write STATUS mandatory DESCRIPTION "The set of ports in this VLAN that provide connectivity to an IP Multicast router." ::= { rcVlanEntry 25 } rcVlanUserDefinedPid OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "When rcVlanProtocolId is set to usrDefined(15) in a protocol-based VLAN, this field represents the 16-bit user defined protocol identifier." ::= { rcVlanEntry 26 } rcVlanIgmpSnoopActiveMRouterPorts OBJECT-TYPE SYNTAX PortSet ACCESS read-only STATUS mandatory DESCRIPTION "Active ports." ::= { rcVlanEntry 27 } rcVlanProtocolIds OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Bitfield of protocol ids." ::= { rcVlanEntry 28 } rcVlanIgmpSnoopActiveQuerier OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "IP address of multicast querier router." ::= { rcVlanEntry 29 } rcVlanIgmpSnoopMRouterExpiration OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Multicast querier router aging time out." ::= { rcVlanEntry 30 } rcVlanIgmpSnoopQuerierPort OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "The port on which the multicast querier router was heard." ::= { rcVlanEntry 31 } rcVlanUserPriority OBJECT-TYPE SYNTAX INTEGER { level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7) } ACCESS read-only STATUS mandatory DESCRIPTION "User priority level." ::= { rcVlanEntry 32 } rcVlanQosLevel OBJECT-TYPE SYNTAX INTEGER { level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to specify the Qos level packets, carried in this VLAN, should be processed with." DEFVAL { level1 } ::= { rcVlanEntry 33 } rcVlanTosValue OBJECT-TYPE SYNTAX INTEGER (1..64) ACCESS read-write STATUS mandatory DESCRIPTION "Tos value." DEFVAL { 1 } ::= { rcVlanEntry 34 } -- VLAN Port Table rcVlanPortTable OBJECT-TYPE SYNTAX SEQUENCE OF RcVlanPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table used to maintain VLAN port related information." ::= { rcVlan 3 } rcVlanPortEntry OBJECT-TYPE SYNTAX RcVlanPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing VLAN information regarding a particular port." INDEX { rcVlanPortIndex } ::= { rcVlanPortTable 1 } RcVlanPortEntry ::= SEQUENCE { rcVlanPortIndex INTEGER, rcVlanPortNumVlanIds INTEGER, rcVlanPortVlanIds IdList, rcVlanPortType INTEGER, rcVlanPortDiscardTaggedFrames TruthValue, rcVlanPortDiscardUntaggedFrames TruthValue, rcVlanPortDefaultVlanId INTEGER, rcVlanPortPerformTagging TruthValue } rcVlanPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An unique index used to identify a particular port in the system. This index is equal to the ifIndex of the port." ::= { rcVlanPortEntry 1 } rcVlanPortNumVlanIds OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of VLAN IDs that are stored in the rcVlanPortVlanIds variable." ::= { rcVlanPortEntry 2 } rcVlanPortVlanIds OBJECT-TYPE SYNTAX IdList (SIZE (4096)) ACCESS read-write STATUS mandatory DESCRIPTION "An array used to identify which VLANs this port is assigned to. Each VLAN ID is stored as a two octet value. The first octet in the pair holds bits 15-8 of the VLAN ID, while the second octet holds bits 7-0 of the VLAN ID." ::= { rcVlanPortEntry 3 } rcVlanPortType OBJECT-TYPE SYNTAX INTEGER { access(1), -- access port type trunk(2) -- trunk port type } ACCESS read-write STATUS mandatory DESCRIPTION "The type of port: access(1) or trunk(2)." DEFVAL { access } ::= { rcVlanPortEntry 4 } rcVlanPortDiscardTaggedFrames OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "A flag used to determine how to process tagged frames received on this access port. When the flag is set, these frames are discarded by the forwarding process. When the flag is reset, these frames are processed normally. This field is meaningless when the port is not an access port and should be set to false(2)." DEFVAL { false } ::= { rcVlanPortEntry 5 } rcVlanPortDiscardUntaggedFrames OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "A flag used to determine how to process untagged frames received on this trunk port. When the flag is set, these frames are discarded by the forwarding process. When the flag is reset, these frames are assigned to the VLAN specified by rcVlanPortDefaultVlanId. This field is meaningless when the port is not a trunk port and should be set to false(2)." DEFVAL { false } ::= { rcVlanPortEntry 6 } rcVlanPortDefaultVlanId OBJECT-TYPE SYNTAX INTEGER (0..4094) ACCESS read-write STATUS mandatory DESCRIPTION "The VLAN ID assigned to untagged frames received on this trunk port. This field is meaningless when the port is not a trunk port." DEFVAL { 1 } ::= { rcVlanPortEntry 7 } rcVlanPortPerformTagging OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Enable/disable the port on the current vlan to perform tagging on the incoming and outgoing traffic." DEFVAL { false } ::= { rcVlanPortEntry 8 } -- VLAN MAC Table rcVlanMacTable OBJECT-TYPE SYNTAX SEQUENCE OF RcVlanMacEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table used to maintain MAC addresses assigned to a particular VLAN by MAC address." ::= { rcVlan 4 } rcVlanMacEntry OBJECT-TYPE SYNTAX RcVlanMacEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing VLAN information regarding a particular port." INDEX { rcVlanMacVlanId, rcVlanMacAddr } ::= { rcVlanMacTable 1 } RcVlanMacEntry ::= SEQUENCE { rcVlanMacVlanId INTEGER, rcVlanMacAddr MacAddress, rcVlanMacRowStatus RowStatus } rcVlanMacVlanId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An unique index used to identify a VLAN (by MAC address) in the system." ::= { rcVlanMacEntry 1 } rcVlanMacAddr OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "An unique index used to identify a MAC address assigned to a particular VLAN." ::= { rcVlanMacEntry 2 } rcVlanMacRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Row status for this entry." ::= { rcVlanMacEntry 3 } -- VLAN IGMP Snoop Table rcVlanIgmpSnoopNumGroups OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of entries (rows) in the rcVlanIgmpSnoopTable." ::= { rcVlan 5 } rcVlanIgmpSnoopTable OBJECT-TYPE --excluded SYNTAX SEQUENCE OF RcVlanIgmpSnoopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The (conceptual) table listing the IP multicast groups for which there are members on a particular interface on a particular VLAN (i.e., a list known multicast receivers). A row is created by the system when it receives an IGMP Join messages on a port." ::= { rcVlan 6 } rcVlanIgmpSnoopEntry OBJECT-TYPE SYNTAX RcVlanIgmpSnoopEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) in the rcVlanIgmpSnoopTable." INDEX { rcVlanIgmpSnoopVlanId, rcVlanIgmpSnoopIpAddress, rcVlanIgmpSnoopIfIndex, rcVlanIgmpSnoopMember } ::= { rcVlanIgmpSnoopTable 1 } RcVlanIgmpSnoopEntry ::= SEQUENCE { rcVlanIgmpSnoopVlanId INTEGER, rcVlanIgmpSnoopIpAddress IpAddress, rcVlanIgmpSnoopIfIndex InterfaceIndex, rcVlanIgmpSnoopMember IpAddress, rcVlanIgmpSnoopExpiration INTEGER, rcVlanIgmpSnoopType INTEGER } rcVlanIgmpSnoopVlanId OBJECT-TYPE SYNTAX INTEGER (1..4094) ACCESS read-only STATUS mandatory DESCRIPTION "The VLAN for which this entry contains information." ::= { rcVlanIgmpSnoopEntry 1 } rcVlanIgmpSnoopIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP multicast group address for which this entry contains information." ::= { rcVlanIgmpSnoopEntry 2 } rcVlanIgmpSnoopIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "The interface for which this entry contains information for this IP multicast group address (i.e., the port the Join message was received)." ::= { rcVlanIgmpSnoopEntry 3 } rcVlanIgmpSnoopMember OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP Address of the source of the membership report received for this IP Multicast group address on this interface (i.e., the address of the host sending the Join message)." ::= { rcVlanIgmpSnoopEntry 4 } rcVlanIgmpSnoopExpiration OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The minimum amount of time remaining before this entry will be aged out." ::= { rcVlanIgmpSnoopEntry 5 } rcVlanIgmpSnoopType OBJECT-TYPE SYNTAX INTEGER { dynamic(1), -- created via IGMP static(2), -- created via management blocked(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of entry: dynamic(1) entries are created by snooping IGMP messages, static(2) entries are created via management." ::= { rcVlanIgmpSnoopEntry 6 } -- VLAN IGMP Snoop Static Table rcVlanIgmpSnoopStaticTable OBJECT-TYPE --excluded SYNTAX SEQUENCE OF RcVlanIgmpSnoopStaticEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The (conceptual) table listing the statically- defined IP multicast groups for which there are members on a particular interface on a particular VLAN." ::= { rcVlan 7 } rcVlanIgmpSnoopStaticEntry OBJECT-TYPE SYNTAX RcVlanIgmpSnoopStaticEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) in the rcVlanIgmpSnoopStaticTable." INDEX { rcVlanIgmpSnoopStaticVlanId, rcVlanIgmpSnoopStaticIpAddress } ::= { rcVlanIgmpSnoopStaticTable 1 } RcVlanIgmpSnoopStaticEntry ::= SEQUENCE { rcVlanIgmpSnoopStaticVlanId INTEGER, rcVlanIgmpSnoopStaticIpAddress IpAddress, rcVlanIgmpSnoopStaticMemberPorts PortSet, rcVlanIgmpSnoopStaticRowStatus RowStatus, rcVlanIgmpSnoopStaticNotAllowedToJoin PortSet } rcVlanIgmpSnoopStaticVlanId OBJECT-TYPE SYNTAX INTEGER (1..4094) ACCESS read-only STATUS mandatory DESCRIPTION "The VLAN for which this entry contains information." ::= { rcVlanIgmpSnoopStaticEntry 1 } rcVlanIgmpSnoopStaticIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP multicast group address for which this entry contains information. The address must fall within 224.0.1.0 to 239.255.255.255." ::= { rcVlanIgmpSnoopStaticEntry 2 } rcVlanIgmpSnoopStaticMemberPorts OBJECT-TYPE SYNTAX PortSet ACCESS read-write STATUS mandatory DESCRIPTION "The set of ports in this VLAN multicast traffic for the rcVlanIgmpSnoopStaticIpAddress is to be forwarded to." ::= { rcVlanIgmpSnoopStaticEntry 3 } rcVlanIgmpSnoopStaticRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Used to create/delete entries in the rcVlanIgmpSnoopStaticTable." ::= { rcVlanIgmpSnoopStaticEntry 4 } rcVlanIgmpSnoopStaticNotAllowedToJoin OBJECT-TYPE SYNTAX PortSet ACCESS read-write STATUS mandatory DESCRIPTION "Not allowed to join" ::= { rcVlanIgmpSnoopStaticEntry 5 } -- VLAN IGMP Snoop Access Table rcVlanIgmpSnoopAccessTable OBJECT-TYPE --excluded SYNTAX SEQUENCE OF RcVlanIgmpSnoopAccessEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table used to specify which host(s) can send and/or receive IP Multicast traffic." ::= { rcVlan 8 } rcVlanIgmpSnoopAccessEntry OBJECT-TYPE SYNTAX RcVlanIgmpSnoopAccessEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) in the rcVlanIgmpSnoopAccessTable." INDEX { rcVlanIgmpSnoopAccessVlanId, rcVlanIgmpSnoopAccessGrpAddr, rcVlanIgmpSnoopAccessHostAddr, rcVlanIgmpSnoopAccessHostMask } ::= { rcVlanIgmpSnoopAccessTable 1 } RcVlanIgmpSnoopAccessEntry ::= SEQUENCE { rcVlanIgmpSnoopAccessVlanId INTEGER, rcVlanIgmpSnoopAccessGrpAddr IpAddress, rcVlanIgmpSnoopAccessHostAddr IpAddress, rcVlanIgmpSnoopAccessHostMask IpAddress, rcVlanIgmpSnoopAccessMode INTEGER, rcVlanIgmpSnoopAccessRowStatus RowStatus } rcVlanIgmpSnoopAccessVlanId OBJECT-TYPE SYNTAX INTEGER (1..4094) ACCESS read-only STATUS mandatory DESCRIPTION "The VLAN for which this entry contains information." ::= { rcVlanIgmpSnoopAccessEntry 1 } rcVlanIgmpSnoopAccessGrpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP multicast group address for which this entry contains information." ::= { rcVlanIgmpSnoopAccessEntry 2 } rcVlanIgmpSnoopAccessHostAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP address of a host for which this entry contains information." ::= { rcVlanIgmpSnoopAccessEntry 3 } rcVlanIgmpSnoopAccessHostMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP netmask of a host for which this entry contains information." ::= { rcVlanIgmpSnoopAccessEntry 4 } rcVlanIgmpSnoopAccessMode OBJECT-TYPE SYNTAX INTEGER { denyTx(1), denyRx(2), denyBoth(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to specify whether the host identified by rcVlanIgmpSnoopAccessHostAddr should be denied IP multicast transmit, receive, or both." ::= { rcVlanIgmpSnoopAccessEntry 5 } rcVlanIgmpSnoopAccessRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Row status" ::= { rcVlanIgmpSnoopAccessEntry 6 } -- VLAN IGMP Snoop Sender Table rcVlanIgmpSnoopSenderTable OBJECT-TYPE --excluded SYNTAX SEQUENCE OF RcVlanIgmpSnoopSenderEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The (conceptual) table listing the IP multicast groups for which there are members on a particular interface on a particular VLAN (i.e., a list known multicast senders). A row is created by the system when it receives an IGMP Join messages on a port." ::= { rcVlan 9 } rcVlanIgmpSnoopSenderEntry OBJECT-TYPE SYNTAX RcVlanIgmpSnoopSenderEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (row) in the rcVlanIgmpSnoopSenderTable." INDEX { rcVlanIgmpSnoopSenderVlanId, rcVlanIgmpSnoopSenderIpAddress, rcVlanIgmpSnoopSenderIfIndex, rcVlanIgmpSnoopSenderMember } ::= { rcVlanIgmpSnoopSenderTable 1 } RcVlanIgmpSnoopSenderEntry ::= SEQUENCE { rcVlanIgmpSnoopSenderVlanId INTEGER, rcVlanIgmpSnoopSenderIpAddress IpAddress, rcVlanIgmpSnoopSenderIfIndex InterfaceIndex, rcVlanIgmpSnoopSenderMember IpAddress, rcVlanIgmpSnoopSenderAction INTEGER } rcVlanIgmpSnoopSenderVlanId OBJECT-TYPE SYNTAX INTEGER (1..4094) ACCESS read-only STATUS mandatory DESCRIPTION "The VLAN for which this entry contains information." ::= { rcVlanIgmpSnoopSenderEntry 1 } rcVlanIgmpSnoopSenderIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP multicast group address for which this entry contains information." ::= { rcVlanIgmpSnoopSenderEntry 2 } rcVlanIgmpSnoopSenderIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "The interface for which this entry contains information for this IP multicast group address (i.e., the port the multicast traffic was received)." ::= { rcVlanIgmpSnoopSenderEntry 3 } rcVlanIgmpSnoopSenderMember OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP Address of the host sending the multicast traffic." ::= { rcVlanIgmpSnoopSenderEntry 4 } rcVlanIgmpSnoopSenderAction OBJECT-TYPE SYNTAX INTEGER { none(0), flushEntry(1), flushGrp(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to specify an action to perform on this group." ::= { rcVlanIgmpSnoopSenderEntry 5 } -- PHYSICAL Elements rcChasType OBJECT-TYPE SYNTAX INTEGER { unknown(1), -- unknown chassis a1100(2), -- 3 slot chassis (1/2, 1/2, full) a1250(6), -- 4 slot chassis (full, ... , full) a1150(7), -- 3 slot chassis (1/2, 1/2, full) a1200(8), -- 8 slot chassis (full, ... , full) a1050(9), -- 2 slot chassis (seahawk) a8003(280887555), -- 3 slot chassis (raptillion) a8006(280887558), -- 6 slot chassis (raptillion) a8010(280887562), -- 10 slot chassis (raptillion) a8010co(1623064842) -- 10 slot Central Office Chassis } ACCESS read-only STATUS mandatory DESCRIPTION "Chassis Type" ::= { rcChassis 1 } rcChasSerialNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "Unique serial number for this chassis." ::= { rcChassis 2 } rcChasHardwareRevision OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "Device hardware revision level" ::= { rcChassis 3 } rcChasNumSlots OBJECT-TYPE SYNTAX INTEGER (1..16) ACCESS read-only STATUS mandatory DESCRIPTION "The number of slots in the chassis available for plug-in cards." ::= { rcChassis 4 } rcChasNumPorts OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The total number of ports currently installed in the chassis." ::= { rcChassis 5 } -- TBD FIXME : We need to get the final list from Hardware rcChasTestResult OBJECT-TYPE SYNTAX INTEGER { other(1), ok(2), crceeprom(3), timer(4), procdram(5), led(6), formaccpuaccess(7), asiccpuaccess(8), memory(9), loopback(10) } ACCESS read-only STATUS mandatory DESCRIPTION "Chassis start-up diagnostic tests." ::= { rcChassis 6 } rcChasFan OBJECT IDENTIFIER ::= { rcChassis 7 } rcChasFanTable OBJECT-TYPE SYNTAX SEQUENCE OF RcChasFanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains information about Fans" ::= { rcChasFan 1 } rcChasFanEntry OBJECT-TYPE SYNTAX RcChasFanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Contains information regarding a Fan Unit" INDEX { rcChasFanId } ::= { rcChasFanTable 1 } RcChasFanEntry ::= SEQUENCE { rcChasFanId INTEGER, rcChasFanOperStatus INTEGER, rcChasFanAmbientTemperature Gauge32 } rcChasFanId OBJECT-TYPE SYNTAX INTEGER(1..4) ACCESS read-only STATUS mandatory ::= { rcChasFanEntry 1 } rcChasFanOperStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), up(2), down(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Actual status of the Fan: - unknown(1) - status can not be determined. - up(2) - present and supplying power. - down(3) - present, but failure indicated." ::= { rcChasFanEntry 2 } rcChasFanAmbientTemperature OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the temperature of the air entering the fan." ::= { rcChasFanEntry 3 } rcChasPowerSupply OBJECT IDENTIFIER ::= { rcChassis 8 } rcChasPowerSupplyTable OBJECT-TYPE SYNTAX SEQUENCE OF RcChasPowerSupplyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains information about power supplies." ::= { rcChasPowerSupply 1 } rcChasPowerSupplyEntry OBJECT-TYPE SYNTAX RcChasPowerSupplyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Contains information regarding a power supply unit." INDEX { rcChasPowerSupplyId } ::= { rcChasPowerSupplyTable 1 } RcChasPowerSupplyEntry ::= SEQUENCE { rcChasPowerSupplyId INTEGER, rcChasPowerSupplyOperStatus INTEGER } rcChasPowerSupplyId OBJECT-TYPE SYNTAX INTEGER(1..3) ACCESS read-only STATUS mandatory ::= { rcChasPowerSupplyEntry 1 } rcChasPowerSupplyOperStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), empty(2), up(3), down(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Actual status of the power supply: - unknown(1) - status can not be determined. - empty(2) - power supply not installed. - up(3) - present and supplying power. - down(4) - present, but failure indicated." ::= { rcChasPowerSupplyEntry 2 } rcChasPowerSupplyDetailTable OBJECT-TYPE SYNTAX SEQUENCE OF RcChasPowerSupplyDetailEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains detailed information about power supplies." ::= { rcChasPowerSupply 2 } rcChasPowerSupplyDetailEntry OBJECT-TYPE SYNTAX RcChasPowerSupplyDetailEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Contains detailed info regarding a power supply unit." INDEX { rcChasPowerSupplyDetailId } ::= { rcChasPowerSupplyDetailTable 1 } RcChasPowerSupplyDetailEntry ::= SEQUENCE { rcChasPowerSupplyDetailId INTEGER, rcChasPowerSupplyDetailType INTEGER, rcChasPowerSupplyDetailSerialNumber DisplayString, rcChasPowerSupplyDetailHardwareRevision DisplayString, rcChasPowerSupplyDetailPartNumber DisplayString } rcChasPowerSupplyDetailId OBJECT-TYPE SYNTAX INTEGER(1..3) ACCESS read-only STATUS mandatory ::= { rcChasPowerSupplyDetailEntry 1 } rcChasPowerSupplyDetailType OBJECT-TYPE SYNTAX INTEGER { ac(1), dc(2) } ACCESS read-only STATUS mandatory ::= { rcChasPowerSupplyDetailEntry 2 } rcChasPowerSupplyDetailSerialNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory ::= { rcChasPowerSupplyDetailEntry 3 } rcChasPowerSupplyDetailHardwareRevision OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory ::= { rcChasPowerSupplyDetailEntry 4 } rcChasPowerSupplyDetailPartNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory ::= { rcChasPowerSupplyDetailEntry 5 } rcCard OBJECT IDENTIFIER ::= { rcChassis 9 } rcCardTable OBJECT-TYPE SYNTAX SEQUENCE OF RcCardEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table that contains information about the cards in this chassis. For those slots that do not contain a physical card, the table may be implemented to contain a conceptual row with the type of physical module set to 'chasCardEmpty', or it may be implemented to have no conceptual row instance." ::= { rcCard 1 } rcCardEntry OBJECT-TYPE SYNTAX RcCardEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Card attributes" INDEX { rcCardIndex } ::= { rcCardTable 1 } RcCardEntry ::= SEQUENCE { rcCardIndex INTEGER, rcCardType INTEGER, rcCardSerialNumber DisplayString, rcCardHardwareRevision DisplayString, rcCardAdminStatus INTEGER, rcCardOperStatus INTEGER, rcCardPCMCIAType INTEGER, rcCardPartNumber DisplayString } rcCardIndex OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each module within the chassis. This value is determined by the chassis slot number where the module is inserted. Valid entries are 1 to the value of rcChasNumSlots" ::= { rcCardEntry 1 } rcCardType OBJECT-TYPE SYNTAX INTEGER { other(1), -- no card installed rcCPU(2), -- [1200] CPU Card (A1200) rc8x100BaseTX(3), -- [1208TX] 8 port (cat 5) (A1200) rc8x100BaseT2(4), -- [] 8 port (cat 3) (A1200) rc8x100BaseF(5), -- [1208FX] 8 port fiber (A1200) rc16x100BaseTX(6), -- [1216TX] 16 port (cat 5) (A1200) rc8x100BaseTXWG(12), -- [1108TX] 8 port (half width) (A1100) rc16x100BaseTXWG(13), -- [1100] 16 port + CPU (A1100) rc4x100BaseFWG(14), -- [1104FX] 4 port (half width) (A1100) rc12x100BaseTXWG(15), -- [1050] 12 port + CPU (A1050) rc12x100BaseFBB(16), -- [] 12 port (A1200) rc8x100BaseFWG(17), -- [1108FX] 8 port (A1100) rc12x100BaseTX-2x100BaseFBB(18), -- [] 12 port + 2 port (A1200) rc2x155BaseFBB(19), -- [] 2 sonet port (A1200) rc4x155BaseFBB(20), -- [] 4 sonet port (A1200) rc16x100BaseFBB(21), -- [1216FX] 16 port fiber (A1200) rc14x100BaseTX-2x100BaseFBB(22), -- [1216TF] 14 port + 2 port (A1200) rc8x10BaseFBB(23), -- [1208FL] 8 port fiber low-speed (A1200) rc4xOC3(24), -- [1200xx] 4 port OC3 (A1200) rc1xOC12(25), -- [1200xx] 1 port OC12 (A1200) rcRMON(26), -- [1200xx] RMON (A1200) rc1xOC12POSBaseMMF(27), -- [1200xx] 1 port OC12 POS (A1200) rc1xOC12POSBaseSMF(28), -- [1200xx] 1 port OC12 POS (A1200) rc4x1000BaseSXWG(1028), -- [1150] 1 0 00 000 0100 + CPU (A1150) rc1x1000BaseSXWG(1025), -- [1101SX] 1 0 00 000 0001 rc2x1000BaseSXWG(1026), -- [1102SX] 1 0 00 000 0010 rc1x1000BaseSXRWG(1537), -- [1101SR] 1 1 00 000 0001 rc2x1000BaseSXRWG(1538), -- [1102SR] 1 1 00 000 0010 rc1x1000BaseLXWG(1153), -- [1101LX] 1 0 01 000 0001 rc2x1000BaseLXWG(1154), -- [1102LX] 1 0 01 000 0010 rc2x1000BaseXDWG(1282), -- [1102XD] 1 0 10 000 0010 rc1x1000BaseLXRWG(1665), -- [1101LR] 1 1 01 000 0001 rc2x1000BaseLXRWG(1666), -- [1102LR] 1 1 01 000 0010 rc1x1000BaseSXBB(1041), -- [1201SX] 1 0 00 001 0001 rc2x1000BaseSXBB(1042), -- [1202SX] 1 0 00 001 0010 rc1x1000BaseSXRBB(1553), -- [1201SR] 1 1 00 001 0001 rc2x1000BaseSXRBB(1554), -- [1202SR] 1 1 00 001 0010 rc1x1000BaseLXBB(1169), -- [1201LX] 1 0 01 001 0001 rc2x1000BaseLXBB(1170), -- [1202LX] 1 0 01 001 0010 rc2x1000BaseXDBB(1298), -- [1202XD] 1 0 10 001 0010 rc1x1000BaseLXRBB(1681), -- [1201LR] 1 1 01 001 0001 rc2x1000BaseLXRBB(1682) -- [1202LR] 1 1 01 001 0010 } ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate a card types in the Accelar 1000 product families. For Accelar 1000 devices, gigabit cards use an encoded value according to the following rule: +-----+--+-+---+---+---+ bits : |31-11|10|9|8-7|6-4|3-0| +-----+--+-+---+---+---+ field : | a | b|c| d | e | f | +-----+--+-+---+---+---+ a : not-used b : 1=gigabit c : 0=non-redundant, 1=redundant d : 0=short-haul, 1=long-haul, 2=extra-distance, e : 0=work-group(a1100 & a1150) 1=back-bone(a1200 & f1250 & f2000), f : 1=1-port, 2=2-port, 4=4-port, 8=8-port " ::= { rcCardEntry 2 } rcCardSerialNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "Unique serial number for this card." ::= { rcCardEntry 3 } rcCardHardwareRevision OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "Hardware Version" ::= { rcCardEntry 4 } rcCardAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate the administrative status of this card" ::= { rcCardEntry 5 } rcCardOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3), unknown(4), dormant(5) } ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the operational status of this card." ::= { rcCardEntry 6 } rcCardPCMCIAType OBJECT-TYPE SYNTAX INTEGER { none(1), modem28kbs(2), flash2meg(3), flash4meg(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the type of PCMCIA card currently installed in this CPU card, if any. For non-CPU cards, this variable has no meaning and will always be set to none." DEFVAL { none } ::= { rcCardEntry 7 } rcCardPartNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "Card Part Number" ::= { rcCardEntry 8 } -- Port Table rcPort OBJECT IDENTIFIER ::= { rcChassis 10 } rcPortTable OBJECT-TYPE SYNTAX SEQUENCE OF RcPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Port table" ::= { rcPort 1 } rcPortEntry OBJECT-TYPE SYNTAX RcPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing info. for a particular port" INDEX { rcPortIndex } ::= { rcPortTable 1 } RcPortEntry ::= SEQUENCE { rcPortIndex InterfaceIndex, rcPortType INTEGER, rcPortConnectorType INTEGER, rcPortPerformRouting TruthValue, rcPortHighPriority TruthValue, --excluded rcPortAction INTEGER, rcPortResult INTEGER, rcPortPrimaryConnector INTEGER, rcPortActiveConnector INTEGER, rcPortBackupConnectorStatus INTEGER, rcPortAutoNegotiate TruthValue, rcPortAdminDuplex INTEGER, rcPortOperDuplex INTEGER, rcPortAdminSpeed INTEGER, rcPortOperSpeed INTEGER, rcPortMltId INTEGER, rcPortLocked TruthValue, rcPortAutoNegotiationSupported TruthValue, rcPortSingleRoutablePort TruthValue, rcPortUnknownMacDiscard TruthValue, rcPortNumStateTransition Counter, rcPortAllowOversizeFrame TruthValue, --excluded rcPortUserPriority INTEGER, --excluded rcPortQosLevel INTEGER, rcPortDiffServEnable TruthValue, rcPortDiffServType INTEGER, rcPortDiffServIeee8021POverrideEnable TruthValue, --excluded rcPortVendorDescr DisplayString, rcPortName DisplayString (SIZE (0..20)) } rcPortIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2." ::= { rcPortEntry 1 } rcPortType OBJECT-TYPE SYNTAX INTEGER { other(0), -- no port installed rc100BaseTX(1), -- (cat 5) rc100BaseT2(2), -- (cat 3) rc100BaseF(3), -- (100 mbps fiber) rc1000BaseF(4), -- (1000 mbps fiber) rc1000BaseDualF(5), -- (fiber - dual connector) rc10BaseF(6), -- (10 mbps fiber) rcPosMMF(7), -- (multi mode fiber) rcPosSMF(8), -- (single mode fiber) rcAtm(9), -- (oc3, oc12, ds3, e3) rcGbicLx(10), -- (gigabit long haul) rcGbicSx(11), -- (gigabit short haul) rcGbicXd(12), -- (gigabit extended distance) rcGbicCu(13), -- (gigabit copper) rcGbicOther(14), -- (gigabit other) rcOc3cSM(15), -- (OC-3c SM) rcOc3cMM(16), -- (OC-3c MM) rcOc3cCOPPER(17), -- (OC-3c COPPER) rcOc12cSM(18), -- (OC-12c SM) rcOc12cMM(19), -- (OC-12c MM) rcDs3(20), -- (Ds3) rcE3(21), -- (E3) rcGbicNone(22), -- (Gbic card feature) rc1000BaseT(23), -- (1000 base copper) rcGbicZx(24), -- (gigabit very extended distance) rcOc3cAtmSM(25), -- (Atm OC-3c SM) rcOc3cAtmMM(26), -- (Atm OC-3c MM) rcOc12cAtmSM(27), -- (Atm OC-12c SM) rcOc12cAtmMM(28), -- (Atm OC-12c MM) rcOc3cPosSM(29), -- (Pos OC-3c SM) rcOc3cPosMM(30), -- (Pos OC-3c MM) rcOc12cPosSM(31), -- (Pos OC-12c SM) rcOc12cPosMM(32) -- (Pos OC-12c MM) } ACCESS read-only STATUS mandatory DESCRIPTION "Port type" ::= { rcPortEntry 2 } rcPortConnectorType OBJECT-TYPE SYNTAX INTEGER { nonRedundant(1), -- non-redundant connector type redundant(2) -- redundant connector type } ACCESS read-only STATUS mandatory DESCRIPTION "Type of connector installed on this port." DEFVAL { nonRedundant } ::= { rcPortEntry 3 } rcPortPerformRouting OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS deprecated DESCRIPTION "Indicate whether this port should perform routing" DEFVAL { false } ::= { rcPortEntry 4 } rcPortHighPriority OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS deprecated DESCRIPTION "Indicate whether this port should be treated with high priority" DEFVAL { false } ::= { rcPortEntry 5 } rcPortAction OBJECT-TYPE SYNTAX INTEGER { none(1), -- none of the following flushMacFdb(2), -- flush MAC forwarding table flushArp(3), -- flush ARP table flushIp(4), -- flush IP route table flushAll(5), -- flush all tables triggerRipUpdate(6) -- manually trigger rip update } ACCESS read-write STATUS mandatory DESCRIPTION "Port related actions." DEFVAL { none } ::= { rcPortEntry 6 } rcPortResult OBJECT-TYPE SYNTAX INTEGER { none(1), -- none of the following inProgress(2), -- in progress success(3), -- success fail(4) -- failure } ACCESS read-only STATUS mandatory DESCRIPTION "Result from the last Vlan action." DEFVAL { none } ::= { rcPortEntry 7 } rcPortPrimaryConnector OBJECT-TYPE SYNTAX INTEGER { left(1), -- left side connector right(2), -- right side connector other(3) } ACCESS read-write STATUS mandatory DESCRIPTION "For ports configured with redundant connectors, this value is used to indicate which connector should be used as the 'active' connector on this port the next time the port is placed into the ifAdminStatus=Up." DEFVAL { left } ::= { rcPortEntry 8 } rcPortActiveConnector OBJECT-TYPE SYNTAX INTEGER { left(1), -- left side connector right(2), -- right side connector other(3) } ACCESS read-only STATUS mandatory DESCRIPTION "For ports configured with redundant connectors, this value is used to indicate which connector is currently the active one. Only one connector can be active an anytime." DEFVAL { left } ::= { rcPortEntry 9 } rcPortBackupConnectorStatus OBJECT-TYPE SYNTAX INTEGER { up(1), -- link Up down(2), -- link Down other(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicate the status of the link attached to the back-up (non-active) connector." ::= { rcPortEntry 10 } rcPortAutoNegotiate OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Indicate whether this port enabled for auto negotiations or not." DEFVAL { true } ::= { rcPortEntry 11 } rcPortAdminDuplex OBJECT-TYPE SYNTAX INTEGER { half(1), -- half duplex full(2) -- full duplex } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the port duplex type " DEFVAL { half } ::= { rcPortEntry 12 } rcPortOperDuplex OBJECT-TYPE SYNTAX INTEGER { half(1), -- half duplex full(2) -- full duplex } ACCESS read-only STATUS mandatory DESCRIPTION "Indicate this port's current duplex value." ::= { rcPortEntry 13 } rcPortAdminSpeed OBJECT-TYPE SYNTAX INTEGER { none(0), mbps10(1), -- 10Mb/s mbps100(2) -- 100Mb/s } ACCESS read-write STATUS mandatory DESCRIPTION "Indicate this port's speed." DEFVAL { mbps10 } ::= { rcPortEntry 14 } rcPortOperSpeed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicate this port's current speed value." ::= { rcPortEntry 15 } rcPortMltId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicate which multi-link trunk (MLT) this port is assigned to. If this port is not associated with any MLT, this value will be set to zero(0)." DEFVAL { 0 } ::= { rcPortEntry 16 } rcPortLocked OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "Indicate whether this port is locked." DEFVAL { false } ::= { rcPortEntry 17 } rcPortAutoNegotiationSupported OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "Indicate whether this port can support auto-negotiation." DEFVAL { false } ::= { rcPortEntry 18 } rcPortSingleRoutablePort OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "Indicate whether this port is a single routable port. If this value is true, the port functions like a traditional router port." DEFVAL { false } ::= { rcPortEntry 19 } rcPortUnknownMacDiscard OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "If rcUnknownMacDiscard is set to True, then a packet with an unknown source MAC address is dropped on that port, and other ports then will discard any packets with this MAC address in the destination field. For example, suppose 11:22:33:44:55:66 is an unknown source MAC, packets with source MAC 11:22:33:44:55 coming from this port is discarded, further more, packets with destination MAC 11:22:33:44:55:66 coming from other ports are also discarded, unless this address is later learned on another port or the restriction ages out." DEFVAL { false } ::= { rcPortEntry 20 } rcPortNumStateTransition OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "# state transitions." ::= { rcPortEntry 21 } rcPortUserPriority OBJECT-TYPE SYNTAX INTEGER { level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7) } ACCESS read-write STATUS deprecated DESCRIPTION "User priority level." DEFVAL { level7 } ::= { rcPortEntry 22 } rcPortAllowOversizeFrame OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to specify whether over-size frames should be processed or dropped." ::= { rcPortEntry 23 } rcPortQosLevel OBJECT-TYPE SYNTAX INTEGER { level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to specify the Qos level packets, carried on this port, should be processed with." DEFVAL { level1 } ::= { rcPortEntry 30 } rcPortDiffServEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to enable/disable the Differentiated Service feature on this port." DEFVAL { false } ::= { rcPortEntry 31 } rcPortDiffServType OBJECT-TYPE SYNTAX INTEGER { none(0), access(1), core(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to specify the Differentiated Service type for this port." DEFVAL { access } ::= { rcPortEntry 32 } rcPortDiffServIeee8021POverrideEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to enable/disable the Differentiated Service IEEE 802.1P over-ride feature." DEFVAL { false } ::= { rcPortEntry 33 } rcPortVendorDescr OBJECT-TYPE SYNTAX DisplayString (SIZE(16)) ACCESS read-only STATUS mandatory DESCRIPTION "Used to show the name of the vendor of this port's connector. Only applicable to ports on a GBIC cards." ::= { rcPortEntry 34 } rcPortName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "This port's name." ::= { rcPortEntry 35 } -- Port Lock Group rcPortLock OBJECT IDENTIFIER ::= { rcChassis 11 } rcPortLockEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Indicate whether the port lock feature is enabled." DEFVAL { false } ::= { rcPortLock 1 } rcPortLockLockedPorts OBJECT-TYPE SYNTAX PortSet ACCESS read-write STATUS mandatory DESCRIPTION "The set of ports that are administratively locked. Locked ports cannot be modified in anyway until the port is unlocked first." ::= { rcPortLock 2 } -- Additional Chassis Group Variables rcChasAruMode OBJECT-TYPE SYNTAX INTEGER { aruOne(1), aruTwo(2), aruThree(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The ARU mode the chassis is operating in." ::= { rcChassis 12 } rcChasQuidMode OBJECT-TYPE SYNTAX INTEGER { quidMixed(1), quidTwo(2), quidThree(3), quidFour(4), quidFive(5) } ACCESS read-only STATUS mandatory DESCRIPTION "The Quid mode the chassis is operating in." ::= { rcChassis 13 } rcChasEocModeAdminStatus OBJECT-TYPE SYNTAX INTEGER { default(0), aru1Quid4(1), aru2Quid4(2), aru2Quid5(3), aru3Quid4(4), aru3Quid5(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to specify the Enforce Operational Configuration Mode(EOC) of the system. When a device is configured with hardware of different revisions, the system will initialize in some deterministic manner (e.g., the lowest common denominator that makes sense based on the hardware configuration). This is the 'default(0)' mode. The user can override this behavior by manually specifying the EOC Mode they would like." ::= { rcChassis 14 } rcChasEocModeOperStatus OBJECT-TYPE SYNTAX INTEGER { default(0), aru1Quid4(1), aru2Quid4(2), aru2Quid5(3), aru3Quid4(4), aru3Quid5(5) } ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the Enforce Operational Configuration Mode(EOC) of the system." ::= { rcChassis 15 } rcChasBrouterPorts OBJECT-TYPE SYNTAX PortSet ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate which ports in the system are configured as Brouter ports." ::= { rcChassis 17 } rcChasGlobalFilterEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to enable/disable global filters in the system. This variable is currently not supported." DEFVAL { false } ::= { rcChassis 18 } rcChasVlanBySrcMacEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to enable/disable source MAC based VLANs in the system." DEFVAL { false } ::= { rcChassis 19 } rcChasDiffServEcnCompatibilityEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to enable/disable the Explicit Congestion Notification(ECN) compatibility feature. When set to FALSE , the system will mask the ECN bits in the DS field while re-marking DSCP and will not match on ECN capable flows if filter is set on DSmatch. When set to TRUE, it will preserve the ECN bits in the DS field while re-marking and will match on full 8-bit DS field." DEFVAL { false } ::= { rcChassis 20 } -- Agent Table rcAgentTable OBJECT-TYPE SYNTAX SEQUENCE OF RcAgentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Agents in a chassis table" ::= { rcChassis 16 } rcAgentEntry OBJECT-TYPE SYNTAX RcAgentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing info. for a particular agent" INDEX { rcAgentId } ::= { rcAgentTable 1 } RcAgentEntry ::= SEQUENCE { rcAgentId INTEGER, rcAgentSlot INTEGER, rcAgentIpAddr IpAddress } rcAgentId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "entry id" ::= { rcAgentEntry 1 } rcAgentSlot OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "slot agent is in." ::= { rcAgentEntry 2 } rcAgentIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "agent's ip address." ::= { rcAgentEntry 3 } -- Mirror Group rcMirrorSaveConfig OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Control whether Mirror configuration information should be saved to NVRAM so mirror settings can be automatically reinstalled after a system reboot. Setting rcMirrorSaveConfig to true does not immediately save the configuration information. The save happens when the rcSysAction variable is set to 'saveToNVRAM(4)'." ::= { rcMirror 1 } rcMirrorByPort OBJECT IDENTIFIER ::= { rcMirror 2 } rcMirrorByPortEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate whether the mirror by port feature is active. The system can only support mirroring on two ports. When this feature is active, all packets received on the port(s) specified by rcMirrorSrcPortOne and/or rcMirrorSrcPortTwo are copied to rcMirrorDstPort. The mirroring operation is non-intrusive." DEFVAL { false } ::= { rcMirrorByPort 1 } rcMirrorByPortMirrorPort OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-write STATUS mandatory DESCRIPTION "The ifIndex of the port to forward mirrored frames to." ::= { rcMirrorByPort 2 } rcMirrorByPortEnableMirroredPortOne OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate whether the port specified in rcMirrorByPortMirroredPortOne should be mirrored." DEFVAL { false } ::= { rcMirrorByPort 3 } rcMirrorByPortMirroredPortOne OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-write STATUS mandatory DESCRIPTION "The ifIndex of the port to be mirrored. That is, traffic received on this port will be sent to the mirror port." ::= { rcMirrorByPort 4 } rcMirrorByPortEnableMirroredPortTwo OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate whether the port specified in rcMirrorByPortMirroredPortTwo should be mirrored." DEFVAL { false } ::= { rcMirrorByPort 5 } rcMirrorByPortMirroredPortTwo OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-write STATUS mandatory DESCRIPTION "The ifIndex of the port to be mirrored. That is, traffic received on this port will be sent to the mirror port." ::= { rcMirrorByPort 6 } -- Dip-Switch Group rcIsolateUnconfigPorts OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate whether ports that are unconfigured should be assigned to the 'isolated' VLAN. Ports assigned to the 'isolated' VLAN can only communicate with the CP port. If this option is not specified, unconfigured ports will be assigned to the 'default' VLAN" ::= { rcDipSwitch 1 } rcUseFactorySettings OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate whether the system should ignore the configuration information stored in NVRAM when the system is booted." ::= { rcDipSwitch 2 } rcHighPriorityMode OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate whether the system is configured to operate in a high priority mode. The switch can operate in either a 'best effort' or 'high priority' mode. In the 'best effort' setting, the maximum queue thresholds for the QUIDs are set to 768/768 buffers. In the 'high priority' mode the setting is 512/768. This means that in 'high priority' mode the normal priority queue can't have more than 512 buffers, while the high priority queue can have up to 768." ::= { rcDipSwitch 3 } -- Table Size Group rcTblRmonStatSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the current size of the RMON Statistic table." ::= { rcTblSize 1 } rcTblRmonHistoryControlSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the current size of the RMON History Control table." ::= { rcTblSize 2 } rcTblRmonHistoryEnetSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the current size of the RMON History Ethernet table." ::= { rcTblSize 3 } rcTblRmonAlarmSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the current size of the RMON Alarm table." ::= { rcTblSize 4 } rcTblRmonEventSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the current size of the RMON Event table." ::= { rcTblSize 5 } rcTblRmonLogSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the current size of the RMON Log table." ::= { rcTblSize 6 } rcTblArTblSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the size of the Address Translation (AR) table." ::= { rcTblSize 7 } rcTblArFree OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of free entries that are available in the Address Translation (AR) table." ::= { rcTblSize 8 } rcTblArNoSpace OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of entries that could not be added to the Address Translation (AR) table due to lack of space." ::= { rcTblSize 9 } rcTblArAdded OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of entries added to the Address Translation (AR) table." ::= { rcTblSize 10 } rcTblArDeleted OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of entries deleted to the Address Translation (AR) table." ::= { rcTblSize 11 } rcTblArMacAdded OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of MAC entries added to the Address Translation (AR) table." ::= { rcTblSize 12 } rcTblArMacDeleted OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of MAC entries deleted to the Address Translation (AR) table." ::= { rcTblSize 13 } rcTblArMacMoved OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of MAC entries moved in the Address Translation (AR) table." ::= { rcTblSize 14 } rcTblArIpAdded OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of IP entries added to the Address Translation (AR) table." ::= { rcTblSize 15 } rcTblArIpDeleted OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of IP entries deleted to the Address Translation (AR) table." ::= { rcTblSize 16 } rcTblArMcastTblSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the size of the Multicast Address Translation (AR) table." ::= { rcTblSize 17 } rcTblArFreeMcastGroups OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of free multicast groups availabe in the Address Translation (AR) table." ::= { rcTblSize 18 } rcTblArIpMcastAdded OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of Ip multicast entries that are added to the Address Translation (AR) table." ::= { rcTblSize 19 } rcTblArIpMcastDeleted OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of Ip multicast entries that are deleted from the Address Translation (AR) table." ::= { rcTblSize 20 } rcTblArVlanByPortAdded OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of VLAN by port entries that are added to the Address Translation (AR) table." ::= { rcTblSize 21 } rcTblArVlanByPortDeleted OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of VLAN by port entries that are deleted from the Address Translation (AR) table." ::= { rcTblSize 22 } rcTblArVlanByProtocolAdded OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of Vlans by Protocol Type entries that are added to the Address Translation (AR) table." ::= { rcTblSize 23 } rcTblArVlanByProtocolDeleted OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of Vlans by Protocol Type entries that are deleted from the Address Translation (AR) table." ::= { rcTblSize 24 } rcTblArVlanByIpSubnetAdded OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of VLAN by Ip entries that are added to the Address Translation (AR) table." ::= { rcTblSize 25 } rcTblArVlanByIpSubnetDeleted OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of VLAN by Ip entries that are deleted from the Address Translation (AR) table." ::= { rcTblSize 26 } rcTblArIpSubnetsAdded OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of Ip subnet entries that are added to the Address Translation (AR) table." ::= { rcTblSize 27 } rcTblArIpSubnetsDeleted OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of Ip subnet entries that are deleted from the Address Translation (AR) table." ::= { rcTblSize 28 } rcTblArRsvpsAdded OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of RSVP entries that are added to the Address Translation (AR) table." ::= { rcTblSize 29 } rcTblArRsvpsDeleted OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of RSVP entries that are deleted from the Address Translation (AR) table." ::= { rcTblSize 30 } rcTblBrdgFdbSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of entries in the dot1d forwarding database table." ::= { rcTblSize 31 } rcTblBrdgStaticSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of entries in the dot1d Static Address Filtering table." ::= { rcTblSize 32 } rcTblIpAddrSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of entries in the IP Address table." ::= { rcTblSize 33 } rcTblIpForwardingSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of entries in the IP Forwarding table." ::= { rcTblSize 34 } rcTblIpNetToMediaSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of entries in the IP Net-to-media table." ::= { rcTblSize 35 } -- IP Group rcIpConf OBJECT IDENTIFIER ::= { rcIp 1 } -- IP Configuration Table rcIpConfTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table used to maintain IP routing information for a particular interface." ::= { rcIpConf 1 } rcIpConfEntry OBJECT-TYPE SYNTAX RcIpConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing IP routing information. An entry is automatically created in this table when routing is enabled for an interface -or- when an ip address is configured on an interface." INDEX { rcIpConfIfIndex } ::= { rcIpConfTable 1 } RcIpConfEntry ::= SEQUENCE { rcIpConfIfIndex InterfaceIndex, rcIpConfAdvertDefRte TruthValue, rcIpConfAcceptDefRte TruthValue, rcIpConfRowStatus RowStatus, rcIpConfRipEnable TruthValue, rcIpConfOspfEnable TruthValue, rcIpConfIgmpEnable TruthValue, rcIpConfAddrAssigned TruthValue, rcIpConfDhcpEnable TruthValue, rcIpConfTriggeredUpdateEnable TruthValue, rcIpConfRipAutoAggrerateEnable TruthValue, rcIpConfRipGenerateDefaultRoute TruthValue, rcIpConfAdvertiseWhenDown TruthValue, rcIpConfDirectBroadcastEnable TruthValue } rcIpConfIfIndex OBJECT-TYPE SYNTAX InterfaceIndex (0..4094) ACCESS read-only STATUS mandatory DESCRIPTION "An unique value to identify a physical interface or a logical interface (VLAN)." ::= { rcIpConfEntry 1 } rcIpConfAdvertDefRte OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate whether this interface should advertize a RIP default route." ::= { rcIpConfEntry 2 } rcIpConfAcceptDefRte OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate whether this interface should accept a RIP default route." ::= { rcIpConfEntry 3 } rcIpConfRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Row status for this entry." ::= { rcIpConfEntry 4 } rcIpConfRipEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable RIP routing on the specified interface." ::= { rcIpConfEntry 5 } rcIpConfOspfEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable OSPF routing on the specified interface." ::= { rcIpConfEntry 6 } rcIpConfIgmpEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable IGMP on the specified interface." ::= { rcIpConfEntry 7 } rcIpConfAddrAssigned OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "Indicate whether IpAddress has been assigned for this interface." ::= { rcIpConfEntry 8 } rcIpConfDhcpEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable DHCP on the specified interface." ::= { rcIpConfEntry 9 } rcIpConfTriggeredUpdateEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate whether the RIP triggered update feature should be enabled on this interface." ::= { rcIpConfEntry 10 } rcIpConfRipAutoAggrerateEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate whether the auto aggregation feature should be enabled on this interface." ::= { rcIpConfEntry 11 } rcIpConfRipGenerateDefaultRoute OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate whether to generate a default RIP route on this interface." ::= { rcIpConfEntry 12 } rcIpConfAdvertiseWhenDown OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "The value is used indicated whether vlan state change should be notified to layer 3 or not, provided the vlan is configured as routable interface. Also used for single routable ports, in that case the criteria for state is PortOperStatus. Vlan is considered as UP if atleast one member of the port based vlan has link up, or atleast one port member of the policy based has an entry in the MGID or atleast one static member of the policy based vlan has link up. Otherwise, vlan is considered as DOWN. If the value is 'true' then the interface state change will not be notified to layer 3. (i.e., it always stays up). If the value is 'false' then the vlan state change will be notified to layer 3 so that IP related status reflects routable interface state." DEFVAL { false } ::= { rcIpConfEntry 13 } rcIpConfDirectBroadcastEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate whether this interface should forward direct broadcast traffic" DEFVAL { true } ::= { rcIpConfEntry 14 } -- Ospf Configuration Table rcIpConfOspfTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpConfOspfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table used to maintain OSPF information for a particular interface." ::= { rcIpConf 2 } rcIpConfOspfEntry OBJECT-TYPE SYNTAX RcIpConfOspfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing OSPF information. An entry is automatically created in this table when routing is enabled for an interface -or- when an ip address is configured on an interface." INDEX { rcIpConfOspfIfIndex } ::= { rcIpConfOspfTable 1 } RcIpConfOspfEntry ::= SEQUENCE { rcIpConfOspfIfIndex InterfaceIndex, rcIpConfOspfRtrPriority INTEGER, rcIpConfOspfMetric INTEGER, rcIpConfOspfAuthKey DisplayString, rcIpConfOspfRowStatus RowStatus, rcIpConfOspfHelloInterval INTEGER, rcIpConfOspfRtrDeadInterval INTEGER, rcIpConfOspfIfAreaId IpAddress, rcIpConfOspfAuthType INTEGER } rcIpConfOspfIfIndex OBJECT-TYPE SYNTAX InterfaceIndex (0..4094) ACCESS read-only STATUS mandatory DESCRIPTION "An unique value to identify a physical interface or a logical interface (VLAN)." ::= { rcIpConfOspfEntry 1 } rcIpConfOspfRtrPriority OBJECT-TYPE SYNTAX INTEGER (0..'FF'h) ACCESS read-write STATUS mandatory DESCRIPTION "The priority of this interface. Used in multi- access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on this particular network. In the event of a tie in this value, routers will use their router id as a tie breaker." DEFVAL { 1 } ::= { rcIpConfOspfEntry 2 } rcIpConfOspfMetric OBJECT-TYPE SYNTAX INTEGER (0..'FFFF'h) ACCESS read-write STATUS mandatory DESCRIPTION "The metric for this type of service (TOS) on this interface. The default value of the TOS 0 Metric is (10^9 / ifSpeed). The value FFFF means 'no route via this TOS'. A value of 0 means the interface speed (rcIpConfOspfDefaultMetric) will be used as metric value, when the state of the interface is up." DEFVAL { 0 } ::= { rcIpConfOspfEntry 3 } rcIpConfOspfAuthKey OBJECT-TYPE SYNTAX DisplayString (SIZE(8)) ACCESS read-write STATUS mandatory DESCRIPTION "The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. When read, ospfIfAuthKey always returns an Octet String of length zero." REFERENCE "OSPF Version 2, Section 9 The Interface Data Structure" ::= { rcIpConfOspfEntry 4 } rcIpConfOspfRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Row status for this entry." ::= { rcIpConfOspfEntry 5 } rcIpConfOspfHelloInterval OBJECT-TYPE SYNTAX INTEGER (1..'FFFF'h) ACCESS read-write STATUS mandatory DESCRIPTION "The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network." DEFVAL { 10 } ::= { rcIpConfOspfEntry 6 } rcIpConfOspfRtrDeadInterval OBJECT-TYPE SYNTAX INTEGER (1..'7FFFFFFF'h) ACCESS read-write STATUS mandatory DESCRIPTION "The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network." DEFVAL { 40 } ::= { rcIpConfOspfEntry 7 } rcIpConfOspfIfAreaId OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone." DEFVAL { '00000000'H } -- 0.0.0.0 ::= { rcIpConfOspfEntry 8 } rcIpConfOspfAuthType OBJECT-TYPE SYNTAX INTEGER { none (0), simplePassword (1), md5 (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The authentication type specified for an interface. Additional authentication types may be assigned locally." REFERENCE "OSPF Version 2, Appendix E Authentication" DEFVAL { 0 } -- no authentication, by default ::= { rcIpConfOspfEntry 9 } -- Ospf Cost Grp rcIpConfOspfDefaultMetric OBJECT IDENTIFIER ::= { rcIpConf 3 } rcIpConfOspfDefaultMetric10MegPort OBJECT-TYPE SYNTAX INTEGER (1..'FFFF'h) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate the cost associated with 10Meg Interface(Port)." ::= { rcIpConfOspfDefaultMetric 1 } rcIpConfOspfDefaultMetric100MegPort OBJECT-TYPE SYNTAX INTEGER (1..'FFFF'h) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate the cost associated with 100Meg Interface(Port)." ::= { rcIpConfOspfDefaultMetric 2 } rcIpConfOspfDefaultMetric1000MegPort OBJECT-TYPE SYNTAX INTEGER (1..'FFFF'h) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate the cost associated with 1000Meg Interface(Port)." ::= { rcIpConfOspfDefaultMetric 3 } rcIpConfOspf OBJECT IDENTIFIER ::= { rcIpConf 4 } rcIpConfOspfTrapEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate whether Ospf Traps should be sent." ::= { rcIpConfOspf 1 } rcIpConfOspfAutoVirtLinkEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate whether auto virtual link creation is enabled or not. If set to true OSPF will create virtual links between ABRs whether it is needed or not, but adjacency will established only when one of the ABR losses connection to backbone area. If set to false then it is user resposibity to create virtual link whenever needed." DEFVAL { false } ::= { rcIpConfOspf 2 } rcIpConfOspfSpfHoldDownTime OBJECT-TYPE SYNTAX INTEGER (3..60) ACCESS read-write STATUS mandatory DESCRIPTION "The SPF Hold Down Timer value. The SPF will run at most once per hold down timer value." DEFVAL { 10 } ::= { rcIpConfOspf 3 } rcIpConfGlobal OBJECT IDENTIFIER ::= { rcIpConf 6 } rcIpConfGlobalRipHoldDownTime OBJECT-TYPE SYNTAX INTEGER (0..360) ACCESS read-write STATUS mandatory DESCRIPTION "Used to set the system-wide RIP hold down time in seconds." DEFVAL { 180 } ::= { rcIpConfGlobal 1 } rcIpConfGlobalIcmpNetUnreach OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to set the icmp net unreach feature enable/disable." DEFVAL { false } ::= { rcIpConfGlobal 2 } -- Ospf Area Table rcIpConfOspfAreaTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpConfOspfAreaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table used to maintain OSPF information for a particular Area." ::= { rcIpConf 7 } rcIpConfOspfAreaEntry OBJECT-TYPE SYNTAX RcIpConfOspfAreaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing OSPF Area configuration information. An entry is automatically created in this table when an area is configured through ospfAreaTable in (rfc1253rcc.mib)." INDEX { rcIpConfOspfAreaId } ::= { rcIpConfOspfAreaTable 1 } RcIpConfOspfAreaEntry ::= SEQUENCE { rcIpConfOspfAreaId IpAddress, rcIpConfOspfAreaImportSummary TruthValue, rcIpConfOspfAreaActiveIfCount INTEGER } rcIpConfOspfAreaId OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "An unique value to identify an area. Area ID 0.0.0.0 is used for the OSPF backbone." ::= { rcIpConfOspfAreaEntry 1 } rcIpConfOspfAreaImportSummary OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "The area's support for importing Summary advertisements into a stub area. This field should be used only if ospfImportASExtern is set to FALSE" DEFVAL { true } ::= { rcIpConfOspfAreaEntry 2 } rcIpConfOspfAreaActiveIfCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This variable displays the number of active interfaces configured in this area. An area cannot be deleted if this value is > 0." ::= { rcIpConfOspfAreaEntry 3 } -- IP Configuration IP Interface Table rcIpConfV2Table OBJECT-TYPE SYNTAX SEQUENCE OF RcIpConfV2Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table used to maintain IP routing information for a particular interface." ::= { rcIpConf 8 } rcIpConfV2Entry OBJECT-TYPE SYNTAX RcIpConfV2Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing IP routing information. An entry is automatically created in this table when routing is enabled for an interface -or- when an ip address is configured on an interface." INDEX { rcIpConfV2Index, rcIpConfV2Addr } ::= { rcIpConfV2Table 1 } RcIpConfV2Entry ::= SEQUENCE { rcIpConfV2Index InterfaceIndex, rcIpConfV2Addr IpAddress, rcIpConfV2RowStatus RowStatus, rcIpConfV2AdvertDefRte TruthValue, rcIpConfV2AcceptDefRte TruthValue, rcIpConfV2RipEnable TruthValue, rcIpConfV2OspfEnable TruthValue, rcIpConfV2IgmpEnable TruthValue, rcIpConfV2AddrAssigned TruthValue, rcIpConfV2TriggeredUpdateEnable TruthValue, rcIpConfV2RipAutoAggrerateEnable TruthValue, rcIpConfV2RipGenerateDefaultRoute TruthValue, rcIpConfV2AdvertiseWhenDown TruthValue } rcIpConfV2Index OBJECT-TYPE SYNTAX InterfaceIndex (0..4094) ACCESS read-only STATUS mandatory DESCRIPTION "An unique value to identify a physical interface or a logical interface (VLAN)." ::= { rcIpConfV2Entry 1 } rcIpConfV2Addr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Ip interface address." ::= { rcIpConfV2Entry 2 } rcIpConfV2RowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Row status for this entry." ::= { rcIpConfV2Entry 3 } rcIpConfV2AdvertDefRte OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate whether this interface should advertize a RIP default route." ::= { rcIpConfV2Entry 4 } rcIpConfV2AcceptDefRte OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate whether this interface should accept a RIP default route." ::= { rcIpConfV2Entry 5 } rcIpConfV2RipEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable RIP routing on the specified interface." ::= { rcIpConfV2Entry 6 } rcIpConfV2OspfEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable OSPF routing on the specified interface." ::= { rcIpConfV2Entry 7 } rcIpConfV2IgmpEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable IGMP on the specified interface." ::= { rcIpConfV2Entry 8 } rcIpConfV2AddrAssigned OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "Indicate whether IpAddress has been assigned for this interface." ::= { rcIpConfV2Entry 9 } rcIpConfV2TriggeredUpdateEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate whether the RIP triggered update feature should be enabled on this interface." ::= { rcIpConfV2Entry 10 } rcIpConfV2RipAutoAggrerateEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate whether the auto aggregation feature should be enabled on this interface." ::= { rcIpConfV2Entry 11 } rcIpConfV2RipGenerateDefaultRoute OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate whether to generate a default RIP route on this interface." ::= { rcIpConfV2Entry 12 } rcIpConfV2AdvertiseWhenDown OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "The value is used indicated whether vlan state change should be notified to layer 3 or not, provided the vlan is configured as routable interface. Also used for single routable ports, in that case the criteria for state is PortOperStatus. Vlan is considered as UP if atleast one member of the port based vlan has link up, or atleast one port member of the policy based has an entry in the MGID or atleast one static member of the policy based vlan has link up. Otherwise, vlan is considered as DOWN. If the value is 'true' then the interface state change will not be notified to layer 3. (i.e., it always stays up). If the value is 'false' then the vlan state change will be notified to layer 3 so that IP related status reflects routable interface state." DEFVAL { false } ::= { rcIpConfV2Entry 13 } -- Ospf Configuration Ip Interface Table rcIpConfOspfV2Table OBJECT-TYPE SYNTAX SEQUENCE OF RcIpConfOspfV2Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table used to maintain OSPF information for a particular interface." ::= { rcIpConf 9 } rcIpConfOspfV2Entry OBJECT-TYPE SYNTAX RcIpConfOspfV2Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing OSPF information. An entry is automatically created in this table when routing is enabled for an interface -or- when an ip address is configured on an interface." INDEX { rcIpConfOspfV2IfIndex, rcIpConfOspfV2IpAddr } ::= { rcIpConfOspfV2Table 1 } RcIpConfOspfV2Entry ::= SEQUENCE { rcIpConfOspfV2IfIndex InterfaceIndex, rcIpConfOspfV2IpAddr IpAddress, rcIpConfOspfV2RtrPriority INTEGER, rcIpConfOspfV2Metric INTEGER, rcIpConfOspfV2AuthKey DisplayString, rcIpConfOspfV2RowStatus RowStatus, rcIpConfOspfV2HelloInterval INTEGER, rcIpConfOspfV2RtrDeadInterval INTEGER, rcIpConfOspfV2IfAreaId IpAddress, rcIpConfOspfV2AuthType INTEGER } rcIpConfOspfV2IfIndex OBJECT-TYPE SYNTAX InterfaceIndex (0..4094) ACCESS read-only STATUS mandatory DESCRIPTION "An unique value to identify a physical interface or a logical interface (VLAN)." ::= { rcIpConfOspfV2Entry 1 } rcIpConfOspfV2IpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "IpAddress of the IP interface." ::= { rcIpConfOspfV2Entry 2 } rcIpConfOspfV2RtrPriority OBJECT-TYPE SYNTAX INTEGER (0..'FF'h) ACCESS read-write STATUS mandatory DESCRIPTION "The priority of this interface. Used in multi- access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on this particular network. In the event of a tie in this value, routers will use their router id as a tie breaker." DEFVAL { 1 } ::= { rcIpConfOspfV2Entry 3 } rcIpConfOspfV2Metric OBJECT-TYPE SYNTAX INTEGER (0..'FFFF'h) ACCESS read-write STATUS mandatory DESCRIPTION "The metric for this type of service (TOS) on this interface. The default value of the TOS 0 Metric is (10^9 / ifSpeed). The value FFFF means 'no route via this TOS'. A value of 0 means the interface speed (rcIpConfOspfV2DefaultMetric) will be used as metric value, when the state of the interface is up." DEFVAL { 0 } ::= { rcIpConfOspfV2Entry 4 } rcIpConfOspfV2AuthKey OBJECT-TYPE SYNTAX DisplayString (SIZE(8)) ACCESS read-write STATUS mandatory DESCRIPTION "The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. When read, ospfIfAuthKey always returns an Octet String of length zero." REFERENCE "OSPF Version 2, Section 9 The Interface Data Structure" ::= { rcIpConfOspfV2Entry 5 } rcIpConfOspfV2RowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Row status for this entry." ::= { rcIpConfOspfV2Entry 6 } rcIpConfOspfV2HelloInterval OBJECT-TYPE SYNTAX INTEGER (1..'FFFF'h) ACCESS read-write STATUS mandatory DESCRIPTION "The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network." DEFVAL { 10 } ::= { rcIpConfOspfV2Entry 7 } rcIpConfOspfV2RtrDeadInterval OBJECT-TYPE SYNTAX INTEGER (1..'7FFFFFFF'h) ACCESS read-write STATUS mandatory DESCRIPTION "The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network." DEFVAL { 40 } ::= { rcIpConfOspfV2Entry 8 } rcIpConfOspfV2IfAreaId OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone." DEFVAL { '00000000'H } -- 0.0.0.0 ::= { rcIpConfOspfV2Entry 9 } rcIpConfOspfV2AuthType OBJECT-TYPE SYNTAX INTEGER { none (0), simplePassword (1), md5 (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The authentication type specified for an interface. Additional authentication types may be assigned locally." REFERENCE "OSPF Version 2, Appendix E Authentication" DEFVAL { 0 } -- no authentication, by default ::= { rcIpConfOspfV2Entry 10 } -- Ospf Area Aggregate Table rcIpConfOspfAreaAggregateTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpConfOspfAreaAggregateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table used to maintain OSPF summary route metric parameter for a particular Area range. " ::= { rcIpConf 10 } rcIpConfOspfAreaAggregateEntry OBJECT-TYPE SYNTAX RcIpConfOspfAreaAggregateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing OSPF summary route metric parameter for a particular Area range. An entry is automatically created in this table when an area range is configured through ospfAreaAggregateTable in rfc1850rcc.mib" INDEX { rcIpConfOspfAreaAggregateAreaID, rcIpConfOspfAreaAggregateLsdbType, rcIpConfOspfAreaAggregateNet, rcIpConfOspfAreaAggregateMask } ::= { rcIpConfOspfAreaAggregateTable 1 } RcIpConfOspfAreaAggregateEntry ::= SEQUENCE { rcIpConfOspfAreaAggregateAreaID IpAddress, rcIpConfOspfAreaAggregateLsdbType INTEGER, rcIpConfOspfAreaAggregateNet IpAddress, rcIpConfOspfAreaAggregateMask IpAddress, rcIpConfOspfAreaAggregateAdvertiseMetric INTEGER(0.. 65535) } rcIpConfOspfAreaAggregateAreaID OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The Area the Address Aggregate is to be found within." REFERENCE "OSPF Version 2, Appendix C.2 Area parameters" ::= { rcIpConfOspfAreaAggregateEntry 1 } rcIpConfOspfAreaAggregateLsdbType OBJECT-TYPE SYNTAX INTEGER { summaryLink (3), nssaExternalLink (7) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of the Address Aggregate. This field specifies the Lsdb type that this Address Ag- gregate applies to." REFERENCE "OSPF Version 2, Appendix A.4.1 The Link State Advertisement header" ::= { rcIpConfOspfAreaAggregateEntry 2 } rcIpConfOspfAreaAggregateNet OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP Address of the Net or Subnet indicated by the range." REFERENCE "OSPF Version 2, Appendix C.2 Area parameters" ::= { rcIpConfOspfAreaAggregateEntry 3 } rcIpConfOspfAreaAggregateMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The Subnet Mask that pertains to the Net or Subnet." REFERENCE "OSPF Version 2, Appendix C.2 Area parameters" ::= { rcIpConfOspfAreaAggregateEntry 4 } rcIpConfOspfAreaAggregateAdvertiseMetric OBJECT-TYPE SYNTAX INTEGER(0 .. 65535) ACCESS read-write STATUS mandatory DESCRIPTION "Used to specify a metric for a Summary LSA (type 3) generated by OSPF through an area range. If this metric is set to 0, OSPF uses the cost to the farthest point in the networks being summarized as the metric." ::= { rcIpConfOspfAreaAggregateEntry 5 } -- IP Address Table rcIpAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of addressing information relevant to this entity's IP addresses. This table is identical to the ipAddrTable in MIB2 except the columns rcIpAdEntIfIndex and rcIpAdEntAddr are reversed. Also, the table is indexed by both these variables." ::= { rcIp 2 } rcIpAddrEntry OBJECT-TYPE SYNTAX RcIpAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The addressing information for one of this entity's IP addresses." INDEX { rcIpAdEntIfIndex, rcIpAdEntAddr } ::= { rcIpAddrTable 1 } RcIpAddrEntry ::= SEQUENCE { rcIpAdEntIfIndex InterfaceIndex, rcIpAdEntAddr IpAddress, rcIpAdEntNetMask IpAddress, rcIpAdEntBcastAddrFormat INTEGER, rcIpAdEntReasmMaxSize INTEGER (0..65535), rcIpAdEntRowStatus RowStatus, rcIpAdEntVlanId INTEGER (1..4094), rcIpAdEntBrouterPort TruthValue, rcIpAdEntMacOffset INTEGER } rcIpAdEntIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { rcIpAddrEntry 1 } rcIpAdEntAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP address to which this entry's addressing information pertains." ::= { rcIpAddrEntry 2 } rcIpAdEntNetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0." ::= { rcIpAddrEntry 3 } rcIpAdEntBcastAddrFormat OBJECT-TYPE SYNTAX INTEGER { zeros(0), -- use zeros ones(1) -- use ones } ACCESS read-only STATUS mandatory DESCRIPTION "The IP broadcast address format used on this interface." ::= { rcIpAddrEntry 4 } rcIpAdEntReasmMaxSize OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface." ::= { rcIpAddrEntry 5 } rcIpAdEntRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Used to create/delete entries" ::= { rcIpAddrEntry 6 } rcIpAdEntVlanId OBJECT-TYPE SYNTAX INTEGER (1..4094) ACCESS read-write STATUS mandatory DESCRIPTION "A value that uniquely identifies the Virtual LAN associated with this entry. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag." ::= { rcIpAddrEntry 7 } rcIpAdEntBrouterPort OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate whether this entry correponds to a brouter port (as oppose to a routable VLAN). This value cannot be changed after the row is created." ::= { rcIpAddrEntry 8 } rcIpAdEntMacOffset OBJECT-TYPE SYNTAX INTEGER (0..511) ACCESS read-write STATUS mandatory DESCRIPTION "Used to translate the ip address into mac address. The system has 512 mac addresses of which 0-507 are reserved for Boardwalk box. 508-511 is reserved for MG. One can either mention a mac offset while configuring an ip on the vlan or it can be alloted by the system within the above range." ::= { rcIpAddrEntry 9 } -- FlowContorl Group rcIpFlowTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpFlowEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IpFlow Table. This table contain entries that correspond to RSVP records in the switching fabric Address Resolution table. A connection that has a matching entry in this table will be processed with a higher priority than connections that do not have an entry." ::= { rcIp 3 } rcIpFlowEntry OBJECT-TYPE SYNTAX RcIpFlowEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Proprietary flow control variables." INDEX { rcIpFlowSrcIpAddress, rcIpFlowSrcIpPort, rcIpFlowDstIpAddress, rcIpFlowDstIpPort, rcIpFlowProtocol } ::= { rcIpFlowTable 1 } RcIpFlowEntry ::= SEQUENCE { rcIpFlowSrcIpAddress IpAddress, rcIpFlowSrcIpPort INTEGER, rcIpFlowDstIpAddress IpAddress, rcIpFlowDstIpPort INTEGER, rcIpFlowProtocol INTEGER, rcIpFlowRowStatus RowStatus } rcIpFlowSrcIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The source IP address of an IP packet." ::= { rcIpFlowEntry 1 } rcIpFlowSrcIpPort OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The source port of an IP packet. A zero value in this field is used as a wildcard value." DEFVAL { 0 } ::= { rcIpFlowEntry 2 } rcIpFlowDstIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The destination IP address of an IP packet." ::= { rcIpFlowEntry 3 } rcIpFlowDstIpPort OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The destination port of an IP packet. A zero value in this field is used as a wildcard value." DEFVAL { 0 } ::= { rcIpFlowEntry 4 } rcIpFlowProtocol OBJECT-TYPE SYNTAX INTEGER { ip(4), -- ip tcp(6), -- tcp udp(17) -- udp } ACCESS read-only STATUS mandatory DESCRIPTION "The protocol type of an IP packet. A zero value in this field is used as a wildcard value." DEFVAL { ip } ::= { rcIpFlowEntry 5 } rcIpFlowRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Status of entry." ::= { rcIpFlowEntry 6 } -- Routing group rcIpRouting OBJECT IDENTIFIER ::= { rcIp 4 } -- rcIpRouting/rcIpRoutingRedistributeRipToOspf Group rcIpRoutingRedistributeRipToOspf OBJECT IDENTIFIER ::= {rcIpRouting 1} rcIpRoutingRedistributeRipToOspfEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS obsolete DESCRIPTION "Used to indicate whether or not to Redistribute RIP routes to OSPF." DEFVAL { false } ::= { rcIpRoutingRedistributeRipToOspf 1 } rcIpRoutingRedistributeRipToOspfExplicitMetric OBJECT-TYPE SYNTAX INTEGER (1..'FFFF'h) ACCESS read-write STATUS obsolete DESCRIPTION "Value of metric that is used to translate the RIP route to OSPF." DEFVAL { 1 } ::= { rcIpRoutingRedistributeRipToOspf 2 } rcIpRoutingRedistributeRipToOspfUseExplicitMetric OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS obsolete DESCRIPTION "Used to indicate whether or not to use the user specified default metric for redistributing RIP routes to OSPF." DEFVAL { false } ::= { rcIpRoutingRedistributeRipToOspf 3 } rcIpRoutingRedistributeRipToOspfExternalMetricType OBJECT-TYPE SYNTAX INTEGER { type1(1), -- extenal metric type1 type2(2) -- extenal metric type2 } ACCESS read-write STATUS obsolete DESCRIPTION "Used to configure the metric type of the distributed routes to OSPF domain. type1 means the metric is comparable directly to the link state metric (cost = internal cost + external cost). type2 means the metric is considered larger than any link state metric (cost = external cost)." DEFVAL { type2 } ::= { rcIpRoutingRedistributeRipToOspf 4 } -- rcIpRouting/rcIpRoutingRedistributeOspfToRip Group rcIpRoutingRedistributeOspfToRip OBJECT IDENTIFIER ::= {rcIpRouting 2} rcIpRoutingRedistributeOspfToRipEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS obsolete DESCRIPTION "Used to indicate whether or not to redistribute OSPF routes to RIP." DEFVAL { false } ::= { rcIpRoutingRedistributeOspfToRip 1 } rcIpRoutingRedistributeOspfToRipExplicitMetric OBJECT-TYPE SYNTAX INTEGER (1..16) ACCESS read-write STATUS obsolete DESCRIPTION "Value of metric that is used to translate the OSPF route to RIP." DEFVAL { 1 } ::= { rcIpRoutingRedistributeOspfToRip 2 } rcIpRoutingRedistributeOspfToRipUseExplicitMetric OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS obsolete DESCRIPTION "Used to indicate whether or not to use the user specified default metric for redistributing OSPF routes to RIP." DEFVAL { true } ::= { rcIpRoutingRedistributeOspfToRip 3 } -- rcIpRouting/rcIpRoutingRedistributeDirectToOspf Group rcIpRoutingRedistributeDirectToOspf OBJECT IDENTIFIER ::= {rcIpRouting 3} rcIpRoutingRedistributeDirectToOspfEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS obsolete DESCRIPTION "Used to indicate whether directly connected networks through non-ospf interfaces are distributed to OSPF database or not. If set to true all the static routes will be added as external routes to OSPF routing domain, provided the router is configured as AS Border router. Also originates asExtern link LSA." DEFVAL { false } ::= { rcIpRoutingRedistributeDirectToOspf 1 } rcIpRoutingRedistributeDirectToOspfMethod OBJECT-TYPE SYNTAX INTEGER { usePortSpeed(1), useExplicitMetric(2) } ACCESS read-write STATUS obsolete DESCRIPTION "Used to indicate whether or not to use the user specified default metric for redistributing direct routes to OSPF." DEFVAL { usePortSpeed } ::= { rcIpRoutingRedistributeDirectToOspf 2 } rcIpRoutingRedistributeDirectToOspfExplicitMetric OBJECT-TYPE SYNTAX INTEGER (1..'FFFF'h) ACCESS read-write STATUS obsolete DESCRIPTION "Value of metric that is used to translate the routes to directly connected networks to OSPF." DEFVAL { 1 } ::= { rcIpRoutingRedistributeDirectToOspf 3 } rcIpRoutingRedistributeDirectToOspfExternalMetricType OBJECT-TYPE SYNTAX INTEGER { type1(1), -- extenal metric type1 type2(2) -- extenal metric type2 } ACCESS read-write STATUS obsolete DESCRIPTION "Used to configure the metric type of the distributed routes to OSPF domain. type1 means the metric is comparable directly to the link state metric (cost = internal cost + external cost). type2 means the metric is considered larger than any link state metric (cost = external cost)." DEFVAL { type1 } ::= { rcIpRoutingRedistributeDirectToOspf 4 } -- rcIpRouting/rcIpRoutingRedistributeStaticToOspf Group rcIpRoutingRedistributeStaticToOspf OBJECT IDENTIFIER ::= {rcIpRouting 4} rcIpRoutingRedistributeStaticToOspfEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS obsolete DESCRIPTION "Used to indicate whether static routes (that are configured locally through management protocol) are distributed to OSPF database or not. If set to true all the static routes will be added as external routes to OSPF routing domain, provided the router is configured as AS Border router. Also originates asExtern link LSA." DEFVAL { false } ::= { rcIpRoutingRedistributeStaticToOspf 1 } rcIpRoutingRedistributeStaticToOspfExplicitMetric OBJECT-TYPE SYNTAX INTEGER (1..'FFFF'h) ACCESS read-write STATUS obsolete DESCRIPTION "Value of metric that is used to translate the static routes to OSPF." DEFVAL { 10 } ::= { rcIpRoutingRedistributeStaticToOspf 2 } rcIpRoutingRedistributeStaticToOspfUseExplicitMetric OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS obsolete DESCRIPTION "Used to indicate whether or not to use the user specified default metric for redistributing static routes to OSPF." DEFVAL { false } ::= { rcIpRoutingRedistributeStaticToOspf 3 } rcIpRoutingRedistributeStaticToOspfExternalMetricType OBJECT-TYPE SYNTAX INTEGER { type1(1), -- extenal metric type1 type2(2) -- extenal metric type2 } ACCESS read-write STATUS obsolete DESCRIPTION "Used to configure the metric type of the distributed routes to OSPF domain. type1 means the metric is comparable directly to the link state metric (cost = internal cost + external cost). type2 means the metric is considered larger than any link state metric (cost = external cost)." DEFVAL { type2 } ::= { rcIpRoutingRedistributeStaticToOspf 4 } rcIpRoutingRedistributeStaticToOspfAdvertDefRte OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS obsolete DESCRIPTION "Used to indicate whether default route (that are configured locally through management protocol) should be distributed to OSPF database or not. If set to true then the default route will be added as external route to OSPF routing domain, provided the router is configured as AS Border router. Also originates asExtern link LSA." DEFVAL { false } ::= { rcIpRoutingRedistributeStaticToOspf 5 } -- rcIpRouting/rcIpRoutingRedistributeDirectToRip Group rcIpRoutingRedistributeDirectToRip OBJECT IDENTIFIER ::= {rcIpRouting 5} rcIpRoutingRedistributeDirectToRipEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS obsolete DESCRIPTION "Used to indicate whether directly connected networks through non-rip interfaces are distributed to RIP or not." DEFVAL { false } ::= { rcIpRoutingRedistributeDirectToRip 1 } -- rcIpRouting/rcIpRoutingRedistributeStaticToRip Group rcIpRoutingRedistributeStaticToRip OBJECT IDENTIFIER ::= {rcIpRouting 6} rcIpRoutingRedistributeStaticToRipEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS obsolete DESCRIPTION "Used to indicate whether static routes (that are configured locally through management protocol) are distributed to RIP database or not. If set to true all the static routes will be added as external routes to RIP routing domain." DEFVAL { false } ::= { rcIpRoutingRedistributeStaticToRip 1 } rcIpConfIgmpTable OBJECT-TYPE --excluded SYNTAX SEQUENCE OF RcIpConfIgmpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table used to maintain IGMP information for a particular interface." ::= { rcIp 5 } rcIpConfIgmpEntry OBJECT-TYPE SYNTAX RcIpConfIgmpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing IGMP information. An entry is automatically created in this table when routing is enabled for an interface -or- when an ip address is configured on an interface." INDEX { rcIpConfIgmpIfIndex } ::= { rcIpConfIgmpTable 1 } RcIpConfIgmpEntry ::= SEQUENCE { rcIpConfIgmpIfIndex INTEGER, rcIpConfIgmpQueryInterval INTEGER, rcIpConfIgmpVersion INTEGER, rcIpConfIgmpQueryMaxResponseTime INTEGER, rcIpConfIgmpQuerierPresentTimeout INTEGER, --excluded rcIpConfIgmpLeaveEnabled TruthValue, --excluded rcIpConfIgmpRowStatus RowStatus, rcIpConfIgmpRobustness INTEGER, rcIpConfIgmpLastMemberQueryInterval INTEGER, rcIpConfIgmpSnoopEnable TruthValue, rcIpConfIgmpProxySnoopEnable TruthValue } rcIpConfIgmpIfIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "An unique value to identify a physical interface or a logical interface (VLAN)." ::= { rcIpConfIgmpEntry 1 } rcIpConfIgmpQueryInterval OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The frequency at which IGMP Host-Query packets are transmitted on this interface." DEFVAL { 125 } ::= { rcIpConfIgmpEntry 2 } rcIpConfIgmpVersion OBJECT-TYPE SYNTAX INTEGER { version1(1), version2(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The version of IGMP which is running on this interface. This object can be used to configure a router capable of running either value. For IGMP to function correctly, all routers on a LAN must be configured to run the same version of IGMP on that LAN." DEFVAL { version2 } ::= { rcIpConfIgmpEntry 3 } rcIpConfIgmpQueryMaxResponseTime OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum query response time advertised in IGMPv2 queries on this interface. Smaller values allow a router to prune groups faster." DEFVAL { 10 } ::= { rcIpConfIgmpEntry 4 } rcIpConfIgmpQuerierPresentTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "A timeout interval. If no IGMPv2 queries are heard on this interface within this timeout interval, the local router will take over the Querier on the IP subnet to which this interface is attached." DEFVAL { 255 } ::= { rcIpConfIgmpEntry 5 } rcIpConfIgmpLeaveEnabled OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "An indication of whether the processing of IGMPv2 Leave messages is enabled on this interface." DEFVAL { true } ::= { rcIpConfIgmpEntry 6 } rcIpConfIgmpRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Status of entry." ::= { rcIpConfIgmpEntry 7 } rcIpConfIgmpRobustness OBJECT-TYPE SYNTAX INTEGER (2..255) ACCESS read-write STATUS mandatory DESCRIPTION "lossiness of network." ::= { rcIpConfIgmpEntry 8 } rcIpConfIgmpLastMemberQueryInterval OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "max response in GrpSpec Query." ::= { rcIpConfIgmpEntry 9 } rcIpConfIgmpSnoopEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Enable snoop." DEFVAL { true } ::= { rcIpConfIgmpEntry 10 } rcIpConfIgmpProxySnoopEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Enable proxy snoop." DEFVAL { true } ::= { rcIpConfIgmpEntry 11 } rcIgmpGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIgmpGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The (conceptual) table listing the multicast groups configured in the device." ::= { rcIp 6 } rcIgmpGroupEntry OBJECT-TYPE SYNTAX RcIgmpGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry (conceptual row) representing an Igmp group." INDEX { rcIgmpGroupIpAddress, rcIgmpGroupMembers } ::= { rcIgmpGroupTable 1 } RcIgmpGroupEntry ::= SEQUENCE { rcIgmpGroupIpAddress IpAddress, rcIgmpGroupMembers IpAddress, rcIgmpGroupInPort INTEGER, rcIgmpGroupExpiration INTEGER } rcIgmpGroupIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Multicast group Address (Class D) that others want to join. A group address can be the same for many incoming ports." ::= { rcIgmpGroupEntry 1 } rcIgmpGroupMembers OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "IP Address of a source that has sent group report wishing to join this group." ::= { rcIgmpGroupEntry 2 } rcIgmpGroupInPort OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources." ::= { rcIgmpGroupEntry 3 } rcIgmpGroupExpiration OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Time left before the group report expired on this port. Only one of this variable port. This variable is updated upon receiving a group report." ::= { rcIgmpGroupEntry 4 } -- IP Route Table rcIpRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpRouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entity's IP Routing table." ::= { rcIp 7 } rcIpRouteEntry OBJECT-TYPE SYNTAX RcIpRouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A route to a particular destination." INDEX { rcIpRouteDest, rcIpRouteMask } ::= { rcIpRouteTable 1 } RcIpRouteEntry ::= SEQUENCE { rcIpRouteDest IpAddress, rcIpRouteMask IpAddress, rcIpRouteNextHop IpAddress, rcIpRouteMetric INTEGER, rcIpRouteIfIndex InterfaceIndex, rcIpRouteType INTEGER, rcIpRouteProto INTEGER, rcIpRouteAge INTEGER, rcIpRouteRowStatus RowStatus } rcIpRouteDest OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use." ::= { rcIpRouteEntry 1 } rcIpRouteMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the rcIpRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the rcIpRouteMask by determining whether the value of the correspondent rcIpRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.0 class-C If the value of the rcIpRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism." ::= { rcIpRouteEntry 2 } rcIpRouteNextHop OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface)." ::= { rcIpRouteEntry 3 } rcIpRouteMetric OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rcIpRouteProto value. If this metric is not used, its value should be set to -1." ::= { rcIpRouteEntry 4 } rcIpRouteIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { rcIpRouteEntry 5 } rcIpRouteType OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following direct(3), -- connected (sub-)network -- route to a non-local indirect(4) -- host/network/sub-network } ACCESS read-only STATUS mandatory DESCRIPTION "The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture." ::= { rcIpRouteEntry 6 } rcIpRouteProto OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following -- non-protocol information, -- e.g., manually configured local(2), -- entries -- set via a network netmgmt(3), -- management protocol -- obtained via ICMP, icmp(4), -- e.g., Redirect -- the remaining values are -- all gateway routing -- protocols egp(5), ggp(6), hello(7), rip(8), is-is(9), es-is(10), ciscoIgrp(11), bbnSpfIgp(12), ospf(13), bgp(14) } ACCESS read-only STATUS mandatory DESCRIPTION "The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols." ::= { rcIpRouteEntry 7 } rcIpRouteAge OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned." ::= { rcIpRouteEntry 8 } rcIpRouteRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Used to create/delete entries" ::= { rcIpRouteEntry 9 } -- Ip Config Dhcp Table rcIpConfDhcpTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpConfDhcpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "DHCP configuration table" ::= { rcIp 8 } rcIpConfDhcpEntry OBJECT-TYPE SYNTAX RcIpConfDhcpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Used to configure DHCP on a particular port. An entry is created automatically when the variable rcIpConfDhcpEnable is set to TRUE. Once created this entry will only be deleted if the rcIpConfDhcpRowStatus is set to 'destroy(6)'. In which case, the rcIpConfDhcpEnable is automatically reset to the FALSE setting." INDEX { rcIpConfDhcpIfIndex } ::= { rcIpConfDhcpTable 1 } RcIpConfDhcpEntry ::= SEQUENCE { rcIpConfDhcpIfIndex InterfaceIndex, rcIpConfDhcpMaxHop INTEGER, rcIpConfDhcpMinSec INTEGER, rcIpConfDhcpMode INTEGER, rcIpConfDhcpRowStatus RowStatus, rcIpConfDhcpNumRequests Counter, rcIpConfDhcpNumReplies Counter, rcIpConfDhcpAlwaysBroadcast TruthValue } rcIpConfDhcpIfIndex OBJECT-TYPE SYNTAX InterfaceIndex (0..4094) ACCESS read-only STATUS mandatory DESCRIPTION "Interface number. The number can represent either a physical or logical(VLAN) interface." ::= { rcIpConfDhcpEntry 1 } rcIpConfDhcpMaxHop OBJECT-TYPE SYNTAX INTEGER (1..16) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate the maximum number of hops a DHCP packet can take from the source device to the destination device (i.e., DHCP client to DHCP server)." DEFVAL { 4 } ::= { rcIpConfDhcpEntry 2 } rcIpConfDhcpMinSec OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate the minimum number of seconds to wait between receiving a DHCP packet and actually forwarding the DHCP packet to the destination device. A value of zero(0) indicates forwarding should be done immediately without any delay." DEFVAL { 0 } ::= { rcIpConfDhcpEntry 3 } rcIpConfDhcpMode OBJECT-TYPE SYNTAX INTEGER { none(0), bootp(2), dhcp(3), both(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate what type of DHCP packets this interface should support. A value of none(1) will result in all incoming DHCP and BOOTP packets to be dropped." DEFVAL { both } ::= { rcIpConfDhcpEntry 4 } rcIpConfDhcpRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "An entry is created automatically when the variable rcIpConfDhcpEnable is set to TRUE. Once created this entry will only be deleted if the rcIpConfDhcpRowStatus is set to 'destroy(6)'. In which case, the rcIpConfDhcpEnable is automatically reset to the FALSE setting." ::= { rcIpConfDhcpEntry 5 } rcIpConfDhcpNumRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of DHCP requests seen on this interface." ::= { rcIpConfDhcpEntry 6 } rcIpConfDhcpNumReplies OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of DHCP replies seen on this interface." ::= { rcIpConfDhcpEntry 7 } rcIpConfDhcpAlwaysBroadcast OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate if DHCP Reply packets should be broadcast to the DHCP client on this interface." DEFVAL { false } ::= { rcIpConfDhcpEntry 8 } -- Ip Dhcp Forward Table rcIpDhcpForwardTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpDhcpForwardEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "DHCP forwarding table." ::= { rcIp 9 } rcIpDhcpForwardEntry OBJECT-TYPE SYNTAX RcIpDhcpForwardEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry used represents a DHCP forwarding directive." INDEX { rcIpDhcpForwardAgentAddr, rcIpDhcpForwardServerAddr } ::= { rcIpDhcpForwardTable 1 } RcIpDhcpForwardEntry ::= SEQUENCE { rcIpDhcpForwardAgentAddr IpAddress, rcIpDhcpForwardServerAddr IpAddress, rcIpDhcpForwardEnable TruthValue, rcIpDhcpForwardMode INTEGER, rcIpDhcpForwardRowStatus RowStatus } rcIpDhcpForwardAgentAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP address configured on an interface (i.e., a locally configured IP address)." ::= { rcIpDhcpForwardEntry 1 } rcIpDhcpForwardServerAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP address of the DHCP server. If this IP address corresponds to a locally configured IP network, the DHCP packet is broadcasted out the interface the IP address is assigned to. This behavior is known as 'relay agent' mode. If this IP address is a remote address, the DHCP packet is sent via unicast to the remote device. This behavior is known as 'preferred server' mode." ::= { rcIpDhcpForwardEntry 2 } rcIpDhcpForwardEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate whether is entry should be used." DEFVAL { true } ::= { rcIpDhcpForwardEntry 3 } rcIpDhcpForwardMode OBJECT-TYPE SYNTAX INTEGER { none(0), bootp(2), dhcp(3), both(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate whether this entry pertains to BOOTP packets, DHCP packets, or both." DEFVAL { both } ::= { rcIpDhcpForwardEntry 4 } rcIpDhcpForwardRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Row status of this entry." ::= { rcIpDhcpForwardEntry 5 } -- IP Filter Group rcIpFilter OBJECT IDENTIFIER ::= { rcIp 10 } rcIpFilterFilterTableSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of entries in the rcIpFilterTable." ::= { rcIpFilter 1 } rcIpFilterGlobalListTableSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of entries in the rcIpFilterGlobalListTable." ::= { rcIpFilter 2 } rcIpFilterBaseListTableSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of entries in the rcIpFilterBaseListTable." ::= { rcIpFilter 3 } rcIpFilterPortTableSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of entries in the rcIpFilterPortTable." ::= { rcIpFilter 4 } rcIpFilterNextAvailFilterId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "next available filter-id in the rcIpFilterPortTable." ::= { rcIpFilter 5 } -- IP Filter Table rcIpFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table containing IP filters." ::= { rcIpFilter 20 } rcIpFilterEntry OBJECT-TYPE SYNTAX RcIpFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IP filter attributes. The system supports a vast array of filter options. Each of these options are supported in this entry. If a particular option is not used, the column should be set to zero." INDEX { rcIpFilterType, rcIpFilterDstAddr, rcIpFilterDstMask, rcIpFilterSrcAddr, rcIpFilterSrcMask, rcIpFilterId } ::= { rcIpFilterTable 1 } RcIpFilterEntry ::= SEQUENCE { rcIpFilterType INTEGER, rcIpFilterDstAddr IpAddress, rcIpFilterDstMask IpAddress, rcIpFilterSrcAddr IpAddress, rcIpFilterSrcMask IpAddress, rcIpFilterId INTEGER (1..4096), rcIpFilterName DisplayString (SIZE (0..15)), rcIpFilterProtocolType INTEGER, rcIpFilterSrcPort INTEGER (0..65535), rcIpFilterSrcOption INTEGER, rcIpFilterDstPort INTEGER (0..65535), rcIpFilterDstOption INTEGER, rcIpFilterCopyToCpu TruthValue, --excluded rcIpFilterMirror TruthValue, rcIpFilterHighPriority TruthValue, --excluded rcIpFilterTcpConnect TruthValue, rcIpFilterIeeeVlanPriority INTEGER, rcIpFilterUsePktLimit TruthValue, --excluded rcIpFilterPktLimit INTEGER, --excluded rcIpFilterRowStatus RowStatus, rcIpFilterMode INTEGER, rcIpFilterIpTosRule INTEGER, --excluded rcIpFilterStopOnMatch TruthValue, rcIpFilterDiffServMatchIeee8021PEnable TruthValue, rcIpFilterDiffServMatchIeee8021P INTEGER(0..7), rcIpFilterDiffServMatchDscpEnable TruthValue, rcIpFilterDiffServMatchDscp DisplayString(SIZE(6)), rcIpFilterDiffServMatchDscpReserved DisplayString(SIZE(2)), rcIpFilterDiffServModifyIeee8021PEnable TruthValue, rcIpFilterDiffServModifyIeee8021P INTEGER(0..7), rcIpFilterDiffServModifyDscpEnable TruthValue, rcIpFilterDiffServModifyDscp DisplayString(SIZE(6)), rcIpFilterDiffServModifyDscpReserved DisplayString(SIZE(2)), rcIpFilterDiffServTrafficProfileId INTEGER(0..64), rcIpFilterMatchIcmpRequest TruthValue, rcIpFilterMatchIpFragment TruthValue, rcIpFilterStatisticEnable TruthValue, rcIpFilterInOctets Counter32, rcIpFilterInPackets Counter32, rcIpFilterRateLimitDiscardPackets Counter32, rcIpFilterNextHopForwardIpAddr IpAddress, rcIpFilterNextHopUnreachableDropEnable TruthValue } rcIpFilterType OBJECT-TYPE SYNTAX INTEGER { global(1), destination(2), source(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate a particular type of filter. A 'global' filter is a filter that is applied to all packets irregardless of the packet's source or destination IP address. A 'destination' filter is used to match the destination IP address field of incoming packets. When a match is found, this filter is applied to the packet. A 'source' filter is used to match the source IP address field of incoming packets. When a match is found, this filter is applied to the packet." ::= { rcIpFilterEntry 1 } rcIpFilterDstAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Destination IP address to filter on." ::= { rcIpFilterEntry 2 } rcIpFilterDstMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Destination IP subnet mask to filter on." ::= { rcIpFilterEntry 3 } rcIpFilterSrcAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Source IP address to filter on." ::= { rcIpFilterEntry 4 } rcIpFilterSrcMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Source IP subnet mask to filter on." ::= { rcIpFilterEntry 5 } rcIpFilterId OBJECT-TYPE SYNTAX INTEGER (1..4096) ACCESS read-only STATUS mandatory DESCRIPTION "This filter's unique identifier(id). This id is automatically generated by the system when a filter is created. This id is used in the 'rcIpFilterGlobalListTable' and 'rcIpFilterBaseListTable' when grouping one or more filters into a filter list." ::= { rcIpFilterEntry 6 } rcIpFilterName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-write STATUS mandatory DESCRIPTION "This filter's name." ::= { rcIpFilterEntry 7 } rcIpFilterProtocolType OBJECT-TYPE SYNTAX INTEGER { ignore(0), icmp(1), tcp(6), udp(17), ipsecesp(50), ipsecah(51), ospf(89), vrrp(112), usrDefined(256) } ACCESS read-write STATUS mandatory DESCRIPTION "Type of protocol to filter on." DEFVAL { ignore } ::= { rcIpFilterEntry 8 } rcIpFilterSrcPort OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "TCP/UDP source port to filter on." DEFVAL { 0 } ::= { rcIpFilterEntry 9 } rcIpFilterSrcOption OBJECT-TYPE SYNTAX INTEGER { equal(0), notEqual(1), greater(2), less(3), ignore(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Type of matching to perform on the field 'rcIpFilterSrcPort'. For 'source' and 'destination' filters, this value can only be 'equal(1)'." DEFVAL { ignore } ::= { rcIpFilterEntry 10 } rcIpFilterDstPort OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "TCP/UDP destination port to filter on." DEFVAL { 0 } ::= { rcIpFilterEntry 11 } rcIpFilterDstOption OBJECT-TYPE SYNTAX INTEGER { equal(0), notEqual(1), greater(2), less(3), ignore(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Type of matching to perform on the field 'rcIpFilterDstPort'. For 'source' and 'destination' filters, this value can only be 'equal(1)'." DEFVAL { ignore } ::= { rcIpFilterEntry 12 } rcIpFilterCopyToCpu OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS deprecated DESCRIPTION "Used to specify whether a packet matching this filter should be copied to the CPU." DEFVAL { false } ::= { rcIpFilterEntry 13 } rcIpFilterMirror OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to specify whether a packet matching this filter should be mirrored to the port specified by 'rcMirrorByPortMirrorPort'." DEFVAL { false } ::= { rcIpFilterEntry 14 } rcIpFilterHighPriority OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS deprecated DESCRIPTION "Used to specify whether a packet matching this filter should be forwarded with high priority." DEFVAL { false } ::= { rcIpFilterEntry 15 } rcIpFilterTcpConnect OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to specify whether a TCP packet matching this filter should be accepted. Pass only those matching TCP packets with either the ACK bit or RST bit set. Apply only if the IP Protocol is set to TCP." DEFVAL { false } ::= { rcIpFilterEntry 16 } rcIpFilterIeeeVlanPriority OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-write STATUS mandatory DESCRIPTION "Used to specify the priority bits for explicit IEEE VLAN tag for a packet matching this filter. If this priority bit field is greater than the priority field currently in the IEEE tag in the Packet Header, this priority field will be loaded into the Packet Header." DEFVAL { 0 } ::= { rcIpFilterEntry 17 } rcIpFilterUsePktLimit OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS deprecated DESCRIPTION "Used to specify whether the 'rcIpFilterPktLimit' field in this entry should be used when applying this filter." DEFVAL { false } ::= { rcIpFilterEntry 18 } rcIpFilterPktLimit OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS deprecated DESCRIPTION "The maximum packet size limit to filter against." DEFVAL { 1500 } ::= { rcIpFilterEntry 19 } rcIpFilterRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Row status of this entry." ::= { rcIpFilterEntry 20 } rcIpFilterMode OBJECT-TYPE SYNTAX INTEGER { useDefaultAction(1), forward(2), drop(3), forwardToNextHop(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to specify the operation mode for this entry. 'useDefaultAction' means use the setting specified in the 'rcIpFilterPortDefaultAction' variable. 'forward' means forward the packet if the packet satisfies this policy. 'drop' means drop the packet if the packet satisfies this policy. 'forwardToNextHop' means forward the packet to the next hop if the packet satisfies this policy. This variable setting has higher precedence than the setting in 'rcIpFilterPortDefaultAction'." DEFVAL { useDefaultAction } ::= { rcIpFilterEntry 21 } rcIpFilterIpTosRule OBJECT-TYPE SYNTAX INTEGER { none(0), ipTosRule1(1), ipTosRule2(2), ipTosRule3(3) } ACCESS read-write STATUS deprecated DESCRIPTION "Used to specify the operation mode for this entry. 'none' means do not manupulate the Ip ToS byte. 'ipTosRule1' means manipulate the Ip ToS byte according to Quid/Gid Rule 1 which is defined in rcIpTosRuleOrRule1. 'ipTosRule2' means manipulate the Ip ToS byte according to Quid/Gid Rule 2 which is defined in rcIpTosRuleOrRule2. 'ipTosRule3' means manipulate the Ip ToS byte according to Quid/Gid Rule 3 which is defined in rcIpTosRuleOrRule3." DEFVAL { none } ::= { rcIpFilterEntry 22 } rcIpFilterStopOnMatch OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to stop further filtering if this filter is applied." DEFVAL { true } ::= { rcIpFilterEntry 23 } rcIpFilterDiffServMatchIeee8021PEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to specify whether the value stored in the variable 'rcIpFilterDiffServMatchIeee8021P' should be used in this filter." DEFVAL { false } ::= { rcIpFilterEntry 24 } rcIpFilterDiffServMatchIeee8021P OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-write STATUS mandatory DESCRIPTION "Used to specify the match value for the 802.1P field. If the 802.1P field in the incoming packet matches this value, then this filter will be applied to the packet." DEFVAL { 0 } ::= { rcIpFilterEntry 25 } rcIpFilterDiffServMatchDscpEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to specify whether the values stored in the variable 'rcIpFilterDiffServMatchDscp' and 'rcIpFilterDiffServMatchDscpReserved' should be used in this filter." DEFVAL { false } ::= { rcIpFilterEntry 26 } rcIpFilterDiffServMatchDscp OBJECT-TYPE SYNTAX DisplayString (SIZE(6)) ACCESS read-write STATUS mandatory DESCRIPTION "Used to specify the match value for the DSCP. If the DSCP in the incoming packet matches this value, then this filter will be applied to the packet. The DSCP represents the high-order 6 bits of the TOS byte (in network order)." ::= { rcIpFilterEntry 27 } rcIpFilterDiffServMatchDscpReserved OBJECT-TYPE SYNTAX DisplayString (SIZE(2)) ACCESS read-write STATUS mandatory DESCRIPTION "Used to specify the match value of the low-order 2 bits of the TOS byte (in network order)." DEFVAL { '00'B } ::= { rcIpFilterEntry 28 } rcIpFilterDiffServModifyIeee8021PEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to specify whether the value stored in the variable 'rcIpFilterDiffServModifyIeee8021P' should be used in this filter." DEFVAL { false } ::= { rcIpFilterEntry 29 } rcIpFilterDiffServModifyIeee8021P OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-write STATUS mandatory DESCRIPTION "Used to specify the value the 802.1P field should be modified to if this filter is applied. The modification is applied at the egress point." DEFVAL { 0 } ::= { rcIpFilterEntry 30 } rcIpFilterDiffServModifyDscpEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to specify whether the value stored in the variable 'rcIpFilterDiffServModifyDscp' should be used in this filter." DEFVAL { false } ::= { rcIpFilterEntry 31 } rcIpFilterDiffServModifyDscp OBJECT-TYPE SYNTAX DisplayString (SIZE(6)) ACCESS read-write STATUS mandatory DESCRIPTION "Used to specify what the value of the DSCP should be modified to if this filter is applied. The modification is applied at the egress point. The DSCP represents the high-order 6 bits of the TOS byte (in network order)." ::= { rcIpFilterEntry 32 } rcIpFilterDiffServModifyDscpReserved OBJECT-TYPE SYNTAX DisplayString (SIZE(2)) ACCESS read-write STATUS mandatory DESCRIPTION "Used to specify the modify value of the low-order 2 bits of the TOS byte (in network order)." DEFVAL { '00'B } ::= { rcIpFilterEntry 33 } rcIpFilterDiffServTrafficProfileId OBJECT-TYPE SYNTAX INTEGER (0..64) ACCESS read-write STATUS mandatory DESCRIPTION "Used to specify which traffic profile should be applied to packets matching this filter. Traffic profiles are specified in the 'rc2kQosTrafficProfileTable' table. A '0' value means do not apply any traffic profile." DEFVAL { 0 } ::= { rcIpFilterEntry 34 } rcIpFilterMatchIcmpRequest OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to specify whether matching on ICMP Request packets should be performed." DEFVAL { false } ::= { rcIpFilterEntry 35 } rcIpFilterMatchIpFragment OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to specify whether matching on fragmented IP packets should be performed." DEFVAL { false } ::= { rcIpFilterEntry 36 } rcIpFilterStatisticEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to turn on/off counters for this filter." DEFVAL { false } ::= { rcIpFilterEntry 37 } rcIpFilterInOctets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of In-Octets for this filter." ::= { rcIpFilterEntry 38 } rcIpFilterInPackets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of In-Packets for this filter." ::= { rcIpFilterEntry 39 } rcIpFilterRateLimitDiscardPackets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets discarded due to rate limiting." ::= { rcIpFilterEntry 40 } rcIpFilterNextHopForwardIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Next hop forward Ip address." ::= { rcIpFilterEntry 41 } rcIpFilterNextHopUnreachableDropEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "If next hop is unreachalbe, enable/disable to drop the packet." ::= { rcIpFilterEntry 42 } -- IP Filter Global List Table rcIpFilterGlobalListTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpFilterGlobalListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table used to store global filter list information. Each row in the table contains a set of individual filters that make up a particular filter list." ::= { rcIpFilter 21 } rcIpFilterGlobalListEntry OBJECT-TYPE SYNTAX RcIpFilterGlobalListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Global filter list attributes." INDEX { rcIpFilterGlobalListId } ::= { rcIpFilterGlobalListTable 1 } RcIpFilterGlobalListEntry ::= SEQUENCE { rcIpFilterGlobalListId INTEGER (1..100), rcIpFilterGlobalListName DisplayString (SIZE(0..15)), rcIpFilterGlobalListFilterIdListSize INTEGER (0..8), rcIpFilterGlobalListFilterIdList IdList(SIZE(16)), rcIpFilterGlobalListRowStatus RowStatus, rcIpFilterGlobalListMemberPorts PortSet } rcIpFilterGlobalListId OBJECT-TYPE SYNTAX INTEGER (1..100) ACCESS read-only STATUS mandatory DESCRIPTION "An unique value to identify a particular global filter list." ::= { rcIpFilterGlobalListEntry 1 } rcIpFilterGlobalListName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-write STATUS mandatory DESCRIPTION "Name of this filter list." ::= { rcIpFilterGlobalListEntry 2 } rcIpFilterGlobalListFilterIdListSize OBJECT-TYPE SYNTAX INTEGER (0..8) ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of filters are associated with this filter list." ::= { rcIpFilterGlobalListEntry 3 } rcIpFilterGlobalListFilterIdList OBJECT-TYPE SYNTAX IdList (SIZE(16)) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate zero or more filters that are associated with this filter list. Each filter identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero." ::= { rcIpFilterGlobalListEntry 4 } rcIpFilterGlobalListRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Row status of this entry." ::= { rcIpFilterGlobalListEntry 5 } rcIpFilterGlobalListMemberPorts OBJECT-TYPE SYNTAX PortSet ACCESS read-only STATUS mandatory DESCRIPTION "Ports filter is used on." ::= { rcIpFilterGlobalListEntry 6 } -- IP Filter Base Table rcIpFilterBaseListTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpFilterBaseListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table used to store base filter list information. Each row in the table contains a set of individual filters that make up a particular filter list." ::= { rcIpFilter 22 } rcIpFilterBaseListEntry OBJECT-TYPE SYNTAX RcIpFilterBaseListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Base filter list attributes." INDEX { rcIpFilterBaseListId } ::= { rcIpFilterBaseListTable 1 } RcIpFilterBaseListEntry ::= SEQUENCE { rcIpFilterBaseListId INTEGER (300..1000), rcIpFilterBaseListName DisplayString (SIZE(0..15)), rcIpFilterBaseListFilterIdListSize INTEGER (0..128), rcIpFilterBaseListFilterIdList IdList (SIZE(256)), rcIpFilterBaseListRowStatus RowStatus, rcIpFilterBaseListMemberPorts PortSet } rcIpFilterBaseListId OBJECT-TYPE SYNTAX INTEGER (300..1000) ACCESS read-only STATUS mandatory DESCRIPTION "An unique value to identify a particular base filter list." ::= { rcIpFilterBaseListEntry 1 } rcIpFilterBaseListName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) ACCESS read-write STATUS mandatory DESCRIPTION "Name of this filter list." ::= { rcIpFilterBaseListEntry 2 } rcIpFilterBaseListFilterIdListSize OBJECT-TYPE SYNTAX INTEGER (0..128) ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of filters are associated with this filter list." ::= { rcIpFilterBaseListEntry 3 } rcIpFilterBaseListFilterIdList OBJECT-TYPE SYNTAX IdList (SIZE(256)) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate zero or more filters that are associated with this filter list. Each filter identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero." ::= { rcIpFilterBaseListEntry 4 } rcIpFilterBaseListRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Row status of this entry." ::= { rcIpFilterBaseListEntry 5 } rcIpFilterBaseListMemberPorts OBJECT-TYPE SYNTAX PortSet ACCESS read-only STATUS mandatory DESCRIPTION "Ports filter is used on." ::= { rcIpFilterBaseListEntry 6 } -- IP Filter Port Table rcIpFilterPortTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpFilterPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table used to store port filtering information." ::= { rcIpFilter 23 } rcIpFilterPortEntry OBJECT-TYPE SYNTAX RcIpFilterPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Port entry attributes." INDEX { rcIpFilterPortIfIndex } ::= { rcIpFilterPortTable 1 } RcIpFilterPortEntry ::= SEQUENCE { rcIpFilterPortIfIndex InterfaceIndex, rcIpFilterPortFilterListSize INTEGER (0..128), rcIpFilterPortFilterList OCTET STRING (SIZE(256)), rcIpFilterPortMode INTEGER, rcIpFilterPortEnable TruthValue, rcIpFilterPortRowStatus RowStatus, rcIpFilterPortDefaultAction INTEGER, rcIpFilterPortNumGlobalFilters INTEGER, rcIpFilterPortNumBaseFilters INTEGER } rcIpFilterPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "IfIndex value of a port where filtering is applied." ::= { rcIpFilterPortEntry 1 } rcIpFilterPortFilterListSize OBJECT-TYPE SYNTAX INTEGER (0..128) ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of filter list(s) that are assigned to this port." ::= { rcIpFilterPortEntry 2 } rcIpFilterPortFilterList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(256)) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate zero or more filter lists that are associated with this port. Each filter list identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero." ::= { rcIpFilterPortEntry 3 } rcIpFilterPortMode OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2), none(3) } ACCESS read-write STATUS obsolete DESCRIPTION "Used to indicate when filters applied to this port should be treated as 'permit' or 'deny' filters. When filters are not enabled on the port the mode is set to none. The port does not block any packet. Mode None cannot be used when PortEnable is true. On a port configured as 'permit', any packet that satisfies a filter is allowed to be forwarded. On a port configured as 'deny', any packet that satisfies a filter is dropped." DEFVAL { none } ::= { rcIpFilterPortEntry 4 } rcIpFilterPortEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate whether filtering is configured on this port." DEFVAL { false } ::= { rcIpFilterPortEntry 5 } rcIpFilterPortRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Row status of this entry." ::= { rcIpFilterPortEntry 6 } rcIpFilterPortDefaultAction OBJECT-TYPE SYNTAX INTEGER { forward(1), drop(2), none(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate the default action that should be performed when an IP filter applies to a particular port. When filters are not enabled on the port the action is set to 'none' which means the port does not block any packet. 'none' cannot be used when PortEnable is true. On a port configured as 'forward', any packet that satisfies a filter is allowed to be forwarded. On a port configured as 'drop', any packet that satisfies a filter is dropped." DEFVAL { none } ::= { rcIpFilterPortEntry 7 } rcIpFilterPortNumGlobalFilters OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "# of global filters" ::= { rcIpFilterPortEntry 8 } rcIpFilterPortNumBaseFilters OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "# of base filters" ::= { rcIpFilterPortEntry 9 } -- IP Policy Address Table rcIpPolicy OBJECT IDENTIFIER ::= { rcIp 11 } rcIpPolicyAddrTableSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of entries in the rcIpPolicyAddrTable." ::= { rcIpPolicy 1 } rcIpPolicyAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpPolicyAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table used to store different types list entries. Each row in the table contains a list entry that is used by a set of announce policies." ::= { rcIpPolicy 2 } rcIpPolicyAddrEntry OBJECT-TYPE SYNTAX RcIpPolicyAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Route entry attributes." INDEX {rcIpPolicyAddrIpAddr} ::= { rcIpPolicyAddrTable 1 } RcIpPolicyAddrEntry ::= SEQUENCE { rcIpPolicyAddrIpAddr IpAddress, rcIpPolicyAddrId INTEGER, rcIpPolicyAddrAddrListIdListSize INTEGER (0..128), rcIpPolicyAddrAddrListIdList OCTET STRING (SIZE(256)), rcIpPolicyAddrRowStatus RowStatus } rcIpPolicyAddrIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The network address for this type of list entry. This value is required for all types of lists." ::= { rcIpPolicyAddrEntry 1 } rcIpPolicyAddrId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Identifier of this entry. Used internally to identify this entry." ::= { rcIpPolicyAddrEntry 2 } rcIpPolicyAddrAddrListIdListSize OBJECT-TYPE SYNTAX INTEGER (0..128) ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of id(s) in the rcIpPolicyAddrListIdList variable." ::= { rcIpPolicyAddrEntry 3 } rcIpPolicyAddrAddrListIdList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(256)) ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate zero or more rcIpPolicyAddrListEntry(s) that are referring to this entry. Each list-id identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero." ::= { rcIpPolicyAddrEntry 4 } rcIpPolicyAddrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Row status of this entry." ::= { rcIpPolicyAddrEntry 5 } -- Ip Policy Network Table rcIpPolicyNetTableSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of entries in the rcIpPolicyNetTable." ::= { rcIpPolicy 3 } rcIpPolicyNetTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpPolicyNetEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table used to store different types list entries. Each row in the table contains a list entry that is used by a set of announce policies." ::= { rcIpPolicy 4 } rcIpPolicyNetEntry OBJECT-TYPE SYNTAX RcIpPolicyNetEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Route entry attributes." INDEX {rcIpPolicyNetAddr, rcIpPolicyNetMask } ::= { rcIpPolicyNetTable 1 } RcIpPolicyNetEntry ::= SEQUENCE { rcIpPolicyNetAddr IpAddress, rcIpPolicyNetMask IpAddress, rcIpPolicyNetId INTEGER, rcIpPolicyNetNetListIdListSize INTEGER (0..128), rcIpPolicyNetNetListIdList OCTET STRING (SIZE(256)), rcIpPolicyNetRowStatus RowStatus } rcIpPolicyNetAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The network address for this type of list entry. This value is required for all types of lists." ::= { rcIpPolicyNetEntry 1 } rcIpPolicyNetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The route mask for this type of list entry. This value is meaningful only if rcIpPolicyNetEntry is equal to exactNet(1), rangeNet(2), advertiseNet(3). For other types it should have the value 0.0.0.0." ::= { rcIpPolicyNetEntry 2 } rcIpPolicyNetId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used internally to recognize this entry." ::= { rcIpPolicyNetEntry 3 } rcIpPolicyNetNetListIdListSize OBJECT-TYPE SYNTAX INTEGER (0..128) ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of id(s) in the rcIpPolicyNetListIdList variable." ::= { rcIpPolicyNetEntry 4 } rcIpPolicyNetNetListIdList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(256)) ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate zero or more rcIpPolicyNetListEntry(s) that are referring to this entry. Each list-id identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero." ::= { rcIpPolicyNetEntry 5 } rcIpPolicyNetRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Row status of this entry." ::= { rcIpPolicyNetEntry 6 } -- IP Policy Address List Table rcIpPolicyAddrListTableSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of entries in the rcIpPolicyAddrListTable." ::= { rcIpPolicy 5 } rcIpPolicyAddrListTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpPolicyAddrListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table used to group rcIpPolicyAddrEntry(s) into a list." ::= { rcIpPolicy 6 } rcIpPolicyAddrListEntry OBJECT-TYPE SYNTAX RcIpPolicyAddrListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Route entry attributes." INDEX { rcIpPolicyAddrListId } ::= { rcIpPolicyAddrListTable 1 } RcIpPolicyAddrListEntry ::= SEQUENCE { rcIpPolicyAddrListId INTEGER (1..1000), rcIpPolicyAddrListName DisplayString (SIZE(0..15)), rcIpPolicyAddrListIdListSize INTEGER (0..128), rcIpPolicyAddrListIdList OCTET STRING (SIZE(256)), rcIpPolicyAddrListPolicyIdListSize INTEGER (0..128), rcIpPolicyAddrListPolicyIdList OCTET STRING (SIZE(256)), rcIpPolicyAddrListRowStatus RowStatus } rcIpPolicyAddrListId OBJECT-TYPE SYNTAX INTEGER (1..1000) ACCESS read-only STATUS mandatory DESCRIPTION "A value that uniquely identifies this list of rcIpPolicyAddrListEntry." ::= { rcIpPolicyAddrListEntry 1 } rcIpPolicyAddrListName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-write STATUS mandatory DESCRIPTION "An administratively-assigned name for this list." ::= { rcIpPolicyAddrListEntry 3 } rcIpPolicyAddrListIdListSize OBJECT-TYPE SYNTAX INTEGER (0..128) ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of rcIpPolicyAddrNetEntry id(s) in the rcIpPolicyAddrListIdList variable." ::= { rcIpPolicyAddrListEntry 4 } rcIpPolicyAddrListIdList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(256)) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate zero or more AddrListId that are associated to this list. Each AddrList identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero." ::= { rcIpPolicyAddrListEntry 5 } rcIpPolicyAddrListPolicyIdListSize OBJECT-TYPE SYNTAX INTEGER (0..128) ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of policy id(s) in the Policy Id list. That are referring to this list." ::= { rcIpPolicyAddrListEntry 6 } rcIpPolicyAddrListPolicyIdList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(256)) ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate zero or more policies that are referring to this entry. Each policy identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero." ::= { rcIpPolicyAddrListEntry 7 } rcIpPolicyAddrListRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Row status of this entry." ::= { rcIpPolicyAddrListEntry 8 } -- RIP Announce Policy Table rcIpPolicyRipAnnounceTableSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of entries in the rcIpPolicyRipAnnounceTable." ::= { rcIpPolicy 7 } rcIpPolicyRipAnnounceTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpPolicyRipAnnounceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table used to store set of announce policies configured for RIP routing protocol. The Number of entries is given by rcIpPolicyNumRipPolicies." ::= { rcIpPolicy 8 } rcIpPolicyRipAnnounceEntry OBJECT-TYPE SYNTAX RcIpPolicyRipAnnounceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing configuration information for a particular announce policy." INDEX { rcIpPolicyRipAnnounceId } ::= { rcIpPolicyRipAnnounceTable 1 } RcIpPolicyRipAnnounceEntry ::= SEQUENCE { rcIpPolicyRipAnnounceId INTEGER (1..1000), rcIpPolicyRipAnnounceName DisplayString (SIZE(0..15)), rcIpPolicyRipAnnounceEnable TruthValue, rcIpPolicyRipAnnounceExactNetListId INTEGER (0..1000), rcIpPolicyRipAnnounceRangeNetListId INTEGER (0..1000), rcIpPolicyRipAnnounceRipGatewayListId INTEGER (0..1000), rcIpPolicyRipAnnounceRipInterfaceListId INTEGER (0..1000), rcIpPolicyRipAnnounceOspfRouterListId INTEGER (0..1000), rcIpPolicyRipAnnounceAnnounceInterfaceListId INTEGER (0..1000), rcIpPolicyRipAnnouncePrecedence INTEGER, rcIpPolicyRipAnnounceRouteSource INTEGER, rcIpPolicyRipAnnounceAdvertiseNetListId INTEGER (0..1000), rcIpPolicyRipAnnounceAction INTEGER, rcIpPolicyRipAnnounceOspfRouteType INTEGER, rcIpPolicyRipAnnounceRipMetric INTEGER (0..15), rcIpPolicyRipAnnounceRowStatus RowStatus } rcIpPolicyRipAnnounceId OBJECT-TYPE SYNTAX INTEGER (1..1000) ACCESS read-only STATUS mandatory DESCRIPTION "A value that uniquely identifies the policy associated with this entry." ::= { rcIpPolicyRipAnnounceEntry 1 } rcIpPolicyRipAnnounceName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-write STATUS mandatory DESCRIPTION "An administratively-assigned name for this policy." ::= { rcIpPolicyRipAnnounceEntry 2 } rcIpPolicyRipAnnounceEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "It indicates whether this policy is enabled or not. The policy should be applied only if it is set to 'true'." DEFVAL { true } ::= { rcIpPolicyRipAnnounceEntry 3 } rcIpPolicyRipAnnounceExactNetListId OBJECT-TYPE SYNTAX INTEGER (0..1000) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate the number of 'exact' type entries that are configured for this policy. An entry with type 'exactNet' or 'rangeNet' represents the network list. This indicates which networks will match a particular announce policy. An entry with a 'exact' type means to only match the specific network advertisement (netaddr & mask). An 'exact' entry with addr=0.0.0.0 and mask=0.0.0.0 means 'match the default route'. If set to '0', this policy applies to all the routes." ::= { rcIpPolicyRipAnnounceEntry 4 } rcIpPolicyRipAnnounceRangeNetListId OBJECT-TYPE SYNTAX INTEGER (0..1000) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate zero or more 'range' network entries that are associated with this policy. An entry with a 'range' type means to match any network number that falls in the range indicated by the addr & mask. A 'range' entry with addr=0.0.0.0 and mask=0.0.0.0 means 'match any route'. If set to '0', this policy applies to all the routes." ::= { rcIpPolicyRipAnnounceEntry 5 } rcIpPolicyRipAnnounceRipGatewayListId OBJECT-TYPE SYNTAX INTEGER (0..1000) ACCESS read-write STATUS mandatory DESCRIPTION "Used to identify the RIP-gatewayList in the list that are associated with this policy. This field has meaning only for RIP sourced routes and if RIP is included as a RouteSource. The list contains one or more rip-routers (other side of the interface) addresses that could send RIP updates to this router. If a router address is included in this list, this policy applies to RIP advertisements from that router. If set to '0', this policy applies to RIP updates received from any rip routers/interfaces." ::= { rcIpPolicyRipAnnounceEntry 6 } rcIpPolicyRipAnnounceRipInterfaceListId OBJECT-TYPE SYNTAX INTEGER (0..1000) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate the number of entries in the ripInterfaceIdList that are configured for this policy. This field has meaning only for RIP sourced routes and if RIP is included as a RouteSource. The list contains one or more rip-interface addresses on this router. If an interface address is incuded in this list, this policy applies to RIP advertisements received on that interface. A value of '0' indicates thtat this policy applies to RIP updates received on any rip-interface." ::= { rcIpPolicyRipAnnounceEntry 7 } rcIpPolicyRipAnnounceOspfRouterListId OBJECT-TYPE SYNTAX INTEGER (0..1000) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate the number of entries in the OspfRouteIds that are configured for this policy. This field has meaning only for OSPF sourced routes and if OSPF is included as a RouteSource. The list contains one or more router IDs of OSPF routers. If a routerId is included in this list, this policy applies to OSPF advertisements received from that router. A value of '0' indicates that this policy applies to any OPSF routes received from any router." ::= { rcIpPolicyRipAnnounceEntry 8 } rcIpPolicyRipAnnounceAnnounceInterfaceListId OBJECT-TYPE SYNTAX INTEGER (0..1000) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate the number of entries in the AnnounceInterfaceids that are configured for this policy. The list contains one or more outbound interface addresses. If the outbound interface address in this list, the policy applies to RIP updates/advertisements sent through this interface. A value of '0' indicates that this policy applies to any outbound RIP interface on this router." ::= { rcIpPolicyRipAnnounceEntry 9 } rcIpPolicyRipAnnouncePrecedence OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Is used while comparing this policy rule with other policy that a given route may match. A rule with a higher precedence value will be chosen over one with a smaller value. In the case of a tie, the PolicyId is used (larger wins)." ::= { rcIpPolicyRipAnnounceEntry 10 } rcIpPolicyRipAnnounceRouteSource OBJECT-TYPE SYNTAX INTEGER { direct(1), static(2), rip(4), ospf(8), any(15) } ACCESS read-write STATUS mandatory DESCRIPTION "Is represented as bitset to indicate route sources. It can contain one or more route sources. If the route source is in this bit map, then a route from that source that meets the other criteria of this policy will match the policy." DEFVAL { any } ::= { rcIpPolicyRipAnnounceEntry 11 } rcIpPolicyRipAnnounceAdvertiseNetListId OBJECT-TYPE SYNTAX INTEGER (0..1000) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate the number of entries in the AdvertiseNetList that are configured for this policy. This has meaning only if the Action is set to 'announce'. It is useful to send or advertise networks that differ from actual network in the routing table. Also allows advertisement of an aggregate or default along with the actual network. Aggregation is useful if a number of routes in the table falls in a certain range. Can save space by sending aggregate route instead of the individual routes. Actual network/route is included in the update only if there is a match or there there is an entry (address & mask pair) 255.255.255.255/255.255.255.255 in the list." ::= { rcIpPolicyRipAnnounceEntry 12 } rcIpPolicyRipAnnounceAction OBJECT-TYPE SYNTAX INTEGER { announce(1), ignore(2) } ACCESS read-write STATUS mandatory DESCRIPTION "It indicates whether the route should be announced or not." DEFVAL { ignore } ::= { rcIpPolicyRipAnnounceEntry 13 } rcIpPolicyRipAnnounceOspfRouteType OBJECT-TYPE SYNTAX INTEGER { type1(1), type2(2), external(3), internal(4), any(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Ospf Route type. It applies to OSPF sourced routes only. 'type1' means to apply this policy to only type1 OSPF external routes. 'type2' means to apply this policy to only type2 OSPF external routes. 'internal' means 'match ospf specfic routes'. 'any' means apply this policy to all OSPF external routes." DEFVAL { any } ::= { rcIpPolicyRipAnnounceEntry 14 } rcIpPolicyRipAnnounceRipMetric OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-write STATUS mandatory DESCRIPTION "RIP metric. The value is meaningful only if the action is set to 'announce'. This is optional export metric to use when advertising a route that matches this policy. If set to zero, the routing table metric calculated for RIP is is used." DEFVAL {0} ::= { rcIpPolicyRipAnnounceEntry 15 } rcIpPolicyRipAnnounceRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Row status of this entry." ::= { rcIpPolicyRipAnnounceEntry 16 } -- OSPF Announce policy table. rcIpPolicyOspfAnnounceTableSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of entries in the rcIpPolicyOspfAnnounceTable." ::= { rcIpPolicy 9 } rcIpPolicyOspfAnnounceTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpPolicyOspfAnnounceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table used to store set of announce policies configured for OSPF routing protocol. The Number of entries is given by rcIpPolicyNumOspfPolicies." ::= { rcIpPolicy 10 } rcIpPolicyOspfAnnounceEntry OBJECT-TYPE SYNTAX RcIpPolicyOspfAnnounceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing configuration information for a particular announce policy." INDEX { rcIpPolicyOspfAnnounceId } ::= { rcIpPolicyOspfAnnounceTable 1 } RcIpPolicyOspfAnnounceEntry ::= SEQUENCE { rcIpPolicyOspfAnnounceId INTEGER (2001..3000), rcIpPolicyOspfAnnounceName DisplayString (SIZE (0..15)), rcIpPolicyOspfAnnounceEnable TruthValue, rcIpPolicyOspfAnnounceExactNetListId INTEGER (0..1000), rcIpPolicyOspfAnnounceRangeNetListId INTEGER (0..1000), rcIpPolicyOspfAnnounceRipGatewayListId INTEGER (0..1000), rcIpPolicyOspfAnnounceRipInterfaceListId INTEGER (0..1000), rcIpPolicyOspfAnnouncePrecedence INTEGER, rcIpPolicyOspfAnnounceRouteSource INTEGER, rcIpPolicyOspfAnnounceAdvertiseNetListId INTEGER (0..1000), rcIpPolicyOspfAnnounceAction INTEGER, rcIpPolicyOspfAnnounceExtMetricType INTEGER, rcIpPolicyOspfAnnounceExtMetric INTEGER (0..65535), rcIpPolicyOspfAnnounceRowStatus RowStatus } rcIpPolicyOspfAnnounceId OBJECT-TYPE SYNTAX INTEGER (2001..3000) ACCESS read-only STATUS mandatory DESCRIPTION "A value that uniquely identifies the policy associated with this entry." ::= { rcIpPolicyOspfAnnounceEntry 1 } rcIpPolicyOspfAnnounceName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-write STATUS mandatory DESCRIPTION "An administratively-assigned name for this policy." ::= { rcIpPolicyOspfAnnounceEntry 2 } rcIpPolicyOspfAnnounceEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "It indicates whether this policy is enabled or not. The policy should be applied only if it is set to 'true'." DEFVAL { true } ::= { rcIpPolicyOspfAnnounceEntry 3 } rcIpPolicyOspfAnnounceExactNetListId OBJECT-TYPE SYNTAX INTEGER (0..1000) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate the number of 'exact' type entries that are configured for this policy. An entry with type 'exactNet' or 'rangeNet' represents the network list. This indicates which networks will match a particular announce policy. An entry with a 'exact' type means to only match the specific network advertisement (netaddr & mask). An 'exact' entry with addr=0.0.0.0 and mask=0.0.0.0 means 'match the default route'. If set to '0', this policy applies to all the routes." ::= { rcIpPolicyOspfAnnounceEntry 4 } rcIpPolicyOspfAnnounceRangeNetListId OBJECT-TYPE SYNTAX INTEGER (0..1000) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate zero or more 'range' network entries that are associated with this policy. An entry with a 'range' type means to match any network number that falls in the range indicated by the addr & mask. A 'range' entry with addr=0.0.0.0 and mask=0.0.0.0 means 'match any route'. If set to '0', this policy applies to all the routes." ::= { rcIpPolicyOspfAnnounceEntry 5 } rcIpPolicyOspfAnnounceRipGatewayListId OBJECT-TYPE SYNTAX INTEGER (0..1000) ACCESS read-write STATUS mandatory DESCRIPTION "Used to identify the RIP-gatewayList in the list that are associated with this policy. This field has meaning only for RIP sourced routes and if RIP is included as a RouteSource. The list contains one or more rip-routers (other side of the interface) addresses that could send RIP updates to this router. If a router address is included in this list, this policy applies to RIP advertisements from that router. If set to '0', this policy applies to RIP updates received from any rip routers/interfaces." ::= { rcIpPolicyOspfAnnounceEntry 6 } rcIpPolicyOspfAnnounceRipInterfaceListId OBJECT-TYPE SYNTAX INTEGER (0..1000) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate the number of entries in the ripInterfaceIdList that are configured for this policy. This field has meaning only for RIP sourced routes and if RIP is included as a RouteSource. The list contains one or more rip-interface addresses on this router. If an interface address is incuded in this list, this policy applies to RIP advertisements received on that interface. A value of '0' indicates thtat this policy applies to RIP updates received on any rip-interface." ::= { rcIpPolicyOspfAnnounceEntry 7 } rcIpPolicyOspfAnnouncePrecedence OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Is used while comparing this policy rule with other policy that a given route may match. A rule with a higher precedence value will be chosen over one with a smaller value. In the case of a tie, the PolicyId is used (larger wins)." ::= { rcIpPolicyOspfAnnounceEntry 8 } rcIpPolicyOspfAnnounceRouteSource OBJECT-TYPE SYNTAX INTEGER { direct(1), static(2), rip(4), any(7) } ACCESS read-write STATUS mandatory DESCRIPTION "Is represented as bit map to indicate route sources. It can contain one or more route sources. If the route source is in this bit map, then a route from that source that meets the other criteria of this policy will match the policy." DEFVAL { any } ::= { rcIpPolicyOspfAnnounceEntry 9 } rcIpPolicyOspfAnnounceAdvertiseNetListId OBJECT-TYPE SYNTAX INTEGER (0..1000) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate the number of entries in the AdvertiseNetList that are configured for this policy. This has meaning only if the Action is set to 'announce'. It is useful to send or advertise networks that differ from actual network in the routing table. Also allows advertisement of an aggregate or default along with the actual network. Aggregation is useful if a number of routes in the table falls in a certain range. Can save space by sending aggregate route instead of the individual routes. Actual network/route is included in the update only if there is a match or there there is an entry (address & mask pair) 255.255.255.255/255.255.255.255 in the list." ::= { rcIpPolicyOspfAnnounceEntry 10 } rcIpPolicyOspfAnnounceAction OBJECT-TYPE SYNTAX INTEGER { announce(1), ignore(2) } ACCESS read-write STATUS mandatory DESCRIPTION "It indicates whether the route should be announced or not." DEFVAL { ignore } ::= { rcIpPolicyOspfAnnounceEntry 11 } rcIpPolicyOspfAnnounceExtMetricType OBJECT-TYPE SYNTAX INTEGER { type1(1), type2(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Ospf External metric type. It is used to indicate what type of the external metric it is. 'type1' means to the cost is 'internal ospf cost + ExtMetric'. 'type2' means the ospf-metric is equal to 'type2'." DEFVAL { type2 } ::= { rcIpPolicyOspfAnnounceEntry 12 } rcIpPolicyOspfAnnounceExtMetric OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "OSPF External metric. The value is meaningful only if the action is set to 'announce'. This is optional export metric to use when advertising a route that matches this policy. Value '0' is used to indicate that route's actual cost is used to announce." DEFVAL { 0 } ::= { rcIpPolicyOspfAnnounceEntry 13 } rcIpPolicyOspfAnnounceRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Row status of this entry." ::= { rcIpPolicyOspfAnnounceEntry 14 } -- IP Accept Policy Groups -- RIP Accept policy table. rcIpPolicyRipAcceptTableSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of entries in the rcIpPolicyRipAcceptTable." ::= { rcIpPolicy 11 } rcIpPolicyRipAcceptTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpPolicyRipAcceptEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table used to store set of accept policies configured for RIP routing protocol. The Number of entries is given by rcIpPolicyNumRipPolicies." ::= { rcIpPolicy 12 } rcIpPolicyRipAcceptEntry OBJECT-TYPE SYNTAX RcIpPolicyRipAcceptEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing configuration information for a particular accept policy." INDEX { rcIpPolicyRipAcceptId } ::= { rcIpPolicyRipAcceptTable 1 } RcIpPolicyRipAcceptEntry ::= SEQUENCE { rcIpPolicyRipAcceptId INTEGER (4001..5000), rcIpPolicyRipAcceptName DisplayString (SIZE(0..15)), rcIpPolicyRipAcceptEnable TruthValue, rcIpPolicyRipAcceptExactNetListId INTEGER (0..1000), rcIpPolicyRipAcceptRangeNetListId INTEGER (0..1000), rcIpPolicyRipAcceptRipGatewayListId INTEGER (0..1000), rcIpPolicyRipAcceptRipInterfaceListId INTEGER (0..1000), rcIpPolicyRipAcceptPrecedence INTEGER, rcIpPolicyRipAcceptAction INTEGER, rcIpPolicyRipAcceptInjectNetListId INTEGER (0..1000), rcIpPolicyRipAcceptApplyMask IpAddress, rcIpPolicyRipAcceptRowStatus RowStatus } rcIpPolicyRipAcceptId OBJECT-TYPE SYNTAX INTEGER (4001..5000) ACCESS read-only STATUS mandatory DESCRIPTION "A value that uniquely identifies the policy associated with this entry." ::= { rcIpPolicyRipAcceptEntry 1 } rcIpPolicyRipAcceptName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-write STATUS mandatory DESCRIPTION "An administratively-assigned name for this policy." ::= { rcIpPolicyRipAcceptEntry 2 } rcIpPolicyRipAcceptEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "It indicates whether this policy is enabled or not. The policy should be applied only if it is set to 'true'." DEFVAL { true } ::= { rcIpPolicyRipAcceptEntry 3 } rcIpPolicyRipAcceptExactNetListId OBJECT-TYPE SYNTAX INTEGER (0..1000) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate the number of 'exact' type entries that are configured for this policy. An entry with type 'exactNet' or 'rangeNet' represents the network list. This indicates which networks will match a particular accept policy. An entry with a 'exact' type means to only match the specific network advertisement (netaddr & mask). An 'exact' entry with addr=0.0.0.0 and mask=0.0.0.0 means 'match the default route'." ::= { rcIpPolicyRipAcceptEntry 4 } rcIpPolicyRipAcceptRangeNetListId OBJECT-TYPE SYNTAX INTEGER (0..1000) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate zero or more 'range' network entries that are associated with this policy. An entry with a 'range' type means to match any network number that falls in the range indicated by the addr & mask. A 'range' entry with addr=0.0.0.0 and mask=0.0.0.0 means 'match any route'. A null list means 'match any route'." ::= { rcIpPolicyRipAcceptEntry 5 } rcIpPolicyRipAcceptRipGatewayListId OBJECT-TYPE SYNTAX INTEGER (0..1000) ACCESS read-write STATUS mandatory DESCRIPTION "Used to identify the RIP-gatewayList in the PolicyListTable that iares associated with this policy. The list contains the addresses of one or more routers that could send RIP updates to this router. If a router address is included in this list, this policy applies to RIP advertisements from that router. If set to '0', this policy applies to RIP updates from any router." ::= { rcIpPolicyRipAcceptEntry 6 } rcIpPolicyRipAcceptRipInterfaceListId OBJECT-TYPE SYNTAX INTEGER (0..1000) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate ListId defined for RipInterfaceList in the rcIpPolicyListTable that is assiciated with this policy. The list contains the addresses of one or more interfaces on this router. If an interface address is included in the list, this policy applies to RIP advertisements received on that interface. If set to '0', this policy applies to RIP updates received on any interface." ::= { rcIpPolicyRipAcceptEntry 7 } rcIpPolicyRipAcceptPrecedence OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Is used while comparing this policy rule with other policy that a given route may match. A rule with a higher precedence value will be chosen over one with a smaller value. In the case of a tie, the PolicyId is used (larger wins)." ::= { rcIpPolicyRipAcceptEntry 8 } rcIpPolicyRipAcceptAction OBJECT-TYPE SYNTAX INTEGER { accept(1), ignore(2) } ACCESS read-write STATUS mandatory DESCRIPTION "It indicates whether the route should be acceptd or not." DEFVAL { accept } ::= { rcIpPolicyRipAcceptEntry 9 } rcIpPolicyRipAcceptInjectNetListId OBJECT-TYPE SYNTAX INTEGER (0..1000) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate the ListId of the InjectNetList in the rcIpPolicyListTable entry that is assiciated with for this policy. If teh action is 'accept' and if it is desired to insert networks into the routing table that differ from the actual advertised network. For instance, if a number of networks in a certain range are learned and an aggregate advertisement could be inserted instead of the individual networks. Upon receiving a route that matches this policy, all networks in this list will be considered for inclusion in the routing table. If the list is empty or if the value of the ListId is '0' then the actual received network is considered. An encoding of 255.255.255.255/255.255.255.255 means 'match the actual received network.'. This allows insertion of an aggregate or default along with the actual netowrk." ::= { rcIpPolicyRipAcceptEntry 10 } rcIpPolicyRipAcceptApplyMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "If the 'action' is set to 'accept' and the actual received network will be considered, this is an optional IP address mask that will be applied to the network number from the RIP update. This is used to override the interface's subnet mask in the presence of networks with variable length subnet masks." ::= { rcIpPolicyRipAcceptEntry 11 } rcIpPolicyRipAcceptRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Row status of this entry." ::= { rcIpPolicyRipAcceptEntry 12 } -- OSPF Accept policy table. rcIpPolicyOspfAcceptTableSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of entries in the rcIpPolicyOspfAcceptTable." ::= { rcIpPolicy 13 } rcIpPolicyOspfAcceptTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpPolicyOspfAcceptEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table used to store set of accept policies configured for RIP routing protocol. The Number of entries is given by rcIpPolicyNumRipPolicies." ::= { rcIpPolicy 14 } rcIpPolicyOspfAcceptEntry OBJECT-TYPE SYNTAX RcIpPolicyOspfAcceptEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing configuration information for a particular accept policy." INDEX { rcIpPolicyOspfAcceptId } ::= { rcIpPolicyOspfAcceptTable 1 } RcIpPolicyOspfAcceptEntry ::= SEQUENCE { rcIpPolicyOspfAcceptId INTEGER (6001..7000), rcIpPolicyOspfAcceptName DisplayString (SIZE(0..15)), rcIpPolicyOspfAcceptEnable TruthValue, rcIpPolicyOspfAcceptExactNetListId INTEGER (0..1000), rcIpPolicyOspfAcceptRangeNetListId INTEGER (0..1000), rcIpPolicyOspfAcceptPrecedence INTEGER, rcIpPolicyOspfAcceptAction INTEGER, rcIpPolicyOspfAcceptInjectNetListId INTEGER (0..1000), rcIpPolicyOspfAcceptExtType INTEGER, rcIpPolicyOspfAcceptRowStatus RowStatus } rcIpPolicyOspfAcceptId OBJECT-TYPE SYNTAX INTEGER (6001..7000) ACCESS read-only STATUS mandatory DESCRIPTION "A value that uniquely identifies the policy associated with this entry." ::= { rcIpPolicyOspfAcceptEntry 1 } rcIpPolicyOspfAcceptName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-write STATUS mandatory DESCRIPTION "An administratively-assigned name for this policy." ::= { rcIpPolicyOspfAcceptEntry 2 } rcIpPolicyOspfAcceptEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "It indicates whether this policy is enabled or not. The policy should be applied only if it is set to 'true'." DEFVAL { true } ::= { rcIpPolicyOspfAcceptEntry 3 } rcIpPolicyOspfAcceptExactNetListId OBJECT-TYPE SYNTAX INTEGER (0..1000) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate the number of 'exact' type entries that are configured for this policy. An entry with type 'exactNet' or 'rangeNet' represents the network list. This indicates which networks will match a particular accept policy. An entry with a 'exact' type means to only match the specific network advertisement (netaddr & mask). An 'exact' entry with addr=0.0.0.0 and mask=0.0.0.0 means 'match the default route'." ::= { rcIpPolicyOspfAcceptEntry 4 } rcIpPolicyOspfAcceptRangeNetListId OBJECT-TYPE SYNTAX INTEGER (0..1000) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate zero or more 'range' network entries that are associated with this policy. An entry with a 'range' type means to match any network number that falls in the range indicated by the addr & mask. A 'range' entry with addr=0.0.0.0 and mask=0.0.0.0 means 'match any route'. A null list means 'match any route'." ::= { rcIpPolicyOspfAcceptEntry 5 } rcIpPolicyOspfAcceptPrecedence OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Is used while comparing this policy rule with other policy that a given route may match. A rule with a higher precedence value will be chosen over one with a smaller value. In the case of a tie, the PolicyId is used (larger wins)." ::= { rcIpPolicyOspfAcceptEntry 6 } rcIpPolicyOspfAcceptAction OBJECT-TYPE SYNTAX INTEGER { accept(1), ignore(2) } ACCESS read-write STATUS mandatory DESCRIPTION "It indicates whether the route should be acceptd or not." DEFVAL { accept } ::= { rcIpPolicyOspfAcceptEntry 7 } rcIpPolicyOspfAcceptInjectNetListId OBJECT-TYPE SYNTAX INTEGER (0..1000) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate the ListId of the InjectNetList in the rcIpPolicyListTable entry that is assiciated with for this policy. If teh action is 'accept' and if it is desired to insert networks into the routing table that differ from the actual advertised network. For instance, if a number of networks in a certain range are learned and an aggregate advertisement could be inserted instead of the individual networks. Upon receiving a route that matches this policy, all networks in this list will be considered for inclusion in the routing table. If the list is empty or if the value of the ListId is '0' then the actual received network is considered. An encoding of 255.255.255.255/255.255.255.255 means 'match the actual received network.'. This allows insertion of an aggregate or default along with the actual netowrk." ::= { rcIpPolicyOspfAcceptEntry 8 } rcIpPolicyOspfAcceptExtType OBJECT-TYPE SYNTAX INTEGER { type1(1), type2(2), any(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate the ospf external type. This parameter describes which types of OSPF ASE routes match this policy. 'any' means 'match either ASE type 1 or 2'. 'type1' means 'match any external type 1'. 'type2' means 'match any external type 2" ::= { rcIpPolicyOspfAcceptEntry 9 } rcIpPolicyOspfAcceptRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Row status of this entry." ::= { rcIpPolicyOspfAcceptEntry 10 } -- IP Policy Network List Table rcIpPolicyNetListTableSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of entries in the rcIpPolicyNetListTable." ::= { rcIpPolicy 15 } rcIpPolicyNetListTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpPolicyNetListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table used to group rcIpPolicyAddrEntry(s) into a list." ::= { rcIpPolicy 16 } rcIpPolicyNetListEntry OBJECT-TYPE SYNTAX RcIpPolicyNetListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Route entry attributes." INDEX { rcIpPolicyNetListId } ::= { rcIpPolicyNetListTable 1 } RcIpPolicyNetListEntry ::= SEQUENCE { rcIpPolicyNetListId INTEGER (1..1000), rcIpPolicyNetListName DisplayString (SIZE(0..15)), rcIpPolicyNetListIdListSize INTEGER (0..128), rcIpPolicyNetListIdList OCTET STRING (SIZE(256)), rcIpPolicyNetListPolicyIdListSize INTEGER (0..128), rcIpPolicyNetListPolicyIdList OCTET STRING (SIZE(256)), rcIpPolicyNetListRowStatus RowStatus } rcIpPolicyNetListId OBJECT-TYPE SYNTAX INTEGER (1..1000) ACCESS read-only STATUS mandatory DESCRIPTION "A value that uniquely identifies this list of rcIpPolicyNetListEntry." ::= { rcIpPolicyNetListEntry 1 } rcIpPolicyNetListName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-write STATUS mandatory DESCRIPTION "An administratively-assigned name for this list." ::= { rcIpPolicyNetListEntry 3 } rcIpPolicyNetListIdListSize OBJECT-TYPE SYNTAX INTEGER (0..128) ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of rcIpPolicyNetEntry id(s) in the rcIpPolicyNetListIdList variable." ::= { rcIpPolicyNetListEntry 4 } rcIpPolicyNetListIdList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(256)) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate zero or more NetListId that are associated to this list. Each NetList identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero." ::= { rcIpPolicyNetListEntry 5 } rcIpPolicyNetListPolicyIdListSize OBJECT-TYPE SYNTAX INTEGER (0..128) ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of policy id(s) in the Policy Id list. That are referring to this list." ::= { rcIpPolicyNetListEntry 6 } rcIpPolicyNetListPolicyIdList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(256)) ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate zero or more policies that are referring to this entry. Each policy identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero." ::= { rcIpPolicyNetListEntry 7 } rcIpPolicyNetListRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Row status of this entry." ::= { rcIpPolicyNetListEntry 8 } -- DVMRP Group Extension rcIpDvmrp OBJECT IDENTIFIER ::= { rcIp 12 } rcIpDvmrpGlobal OBJECT IDENTIFIER ::= { rcIpDvmrp 1 } rcIpDvmrpGlobalEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "The enabled status of IP Multicast Dvmrp routing on this router." ::= { rcIpDvmrpGlobal 1 } rcIpDvmrpGlobalUpdateInterval OBJECT-TYPE SYNTAX INTEGER (10..2000) ACCESS read-write STATUS mandatory DESCRIPTION "Route upd interval" DEFVAL { 60 } ::= { rcIpDvmrpGlobal 2 } rcIpDvmrpGlobalTriggeredUpdateInterval OBJECT-TYPE SYNTAX INTEGER (5..1000) ACCESS read-write STATUS mandatory DESCRIPTION "Trigger upd interval" DEFVAL { 5 } ::= { rcIpDvmrpGlobal 3 } rcIpDvmrpGlobalLeafTimeOut OBJECT-TYPE SYNTAX INTEGER (25..4000) ACCESS read-write STATUS mandatory DESCRIPTION "Hold down timer for leaf" DEFVAL { 200 } ::= { rcIpDvmrpGlobal 4 } rcIpDvmrpGlobalNbrTimeOut OBJECT-TYPE SYNTAX INTEGER (35..8000) ACCESS read-write STATUS mandatory DESCRIPTION "Time to age out nbr" DEFVAL { 140 } ::= { rcIpDvmrpGlobal 5 } rcIpDvmrpGlobalNbrProbeInterval OBJECT-TYPE SYNTAX INTEGER (5..30) ACCESS read-write STATUS mandatory DESCRIPTION "How often to send probe" DEFVAL { 10 } ::= { rcIpDvmrpGlobal 6 } rcIpDvmrpGlobalRouteExpireTimeOut OBJECT-TYPE SYNTAX INTEGER (20..4000) ACCESS read-write STATUS mandatory DESCRIPTION "This parameter defines the route expiration timeout in seconds." DEFVAL { 140 } ::= { rcIpDvmrpGlobal 7 } rcIpDvmrpGlobalFwdCacheTimeOut OBJECT-TYPE SYNTAX INTEGER (300..86400) ACCESS read-write STATUS mandatory DESCRIPTION "This is the Forward Cache Value in second. This value is going to be used in aging prune entries in seconds." DEFVAL { 300 } ::= { rcIpDvmrpGlobal 8 } rcIpDvmrpGlobalRouteDiscardTimeOut OBJECT-TYPE SYNTAX INTEGER (40..8000) ACCESS read-write STATUS mandatory DESCRIPTION "This parameter defines time to garbage collect route in seconds." DEFVAL { 260 } ::= { rcIpDvmrpGlobal 9 } rcIpDvmrpGlobalRouteSwitchTimeOut OBJECT-TYPE SYNTAX INTEGER (20..2000) ACCESS read-write STATUS mandatory DESCRIPTION "This parameter defines the route discard timeout in seconds." DEFVAL { 140 } ::= { rcIpDvmrpGlobal 10 } -- rcIpDvmrpTable rcIpDvmrpTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpDvmrpTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Dvmrp Interface extension table. This table augments the standard dvmrpInterfaceTable defined in ." ::= { rcIpDvmrp 2 } rcIpDvmrpTableEntry OBJECT-TYPE SYNTAX RcIpDvmrpTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing Proprietary DVMRP interface information. An entry is automatically created in this table when an ip address is configured on an interface." INDEX { rcIpDvmrpTableIfIndex } ::= { rcIpDvmrpTable 1 } RcIpDvmrpTableEntry ::= SEQUENCE { rcIpDvmrpTableIfIndex InterfaceIndex, rcIpDvmrpTableEnable TruthValue, rcIpDvmrpTableMetric INTEGER } rcIpDvmrpTableIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { rcIpDvmrpTableEntry 1 } rcIpDvmrpTableEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "The administrative status of DVMRP in the router. The value 'enabled' denotes that the DVMRP is enableed on the interface; 'disabled' disables it on the interface." ::= { rcIpDvmrpTableEntry 2 } rcIpDvmrpTableMetric OBJECT-TYPE SYNTAX INTEGER (1..31) ACCESS read-write STATUS mandatory DESCRIPTION "Dvmrp cost on this interface." ::= { rcIpDvmrpTableEntry 3 } -- Ip UDP Protocol Table rcIpUdp OBJECT IDENTIFIER ::= { rcIp 13 } rcIpUdpProtocolTableSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of entries in the rcIpUdpProtocolTable." ::= { rcIpUdp 1 } rcIpUdpProtocolTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpUdpProtocolEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "list of UDP protocols. Used to determine whether to forward the UDP broadcast packet or not." ::= { rcIpUdp 2 } rcIpUdpProtocolEntry OBJECT-TYPE SYNTAX RcIpUdpProtocolEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Used to include a particular UDP port in the table. An entry in this table indicates that the box might do forwarding of UDP broadcast packets if there is a matching entry for this packet in the rcIpUdpPortFwdTable." INDEX { rcIpUdpProtocolPortNumber } ::= { rcIpUdpProtocolTable 1 } RcIpUdpProtocolEntry ::= SEQUENCE { rcIpUdpProtocolPortNumber INTEGER, rcIpUdpProtocolName DisplayString, rcIpUdpProtocolRowStatus RowStatus } rcIpUdpProtocolPortNumber OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "well-known UDP Port number. Pre-assigned port number for this protocol. Port used by the server process as its contact port. It cannot be BOOTP/DHCP port#s 67, 68." ::= { rcIpUdpProtocolEntry 1 } rcIpUdpProtocolName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..15)) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate the name of the protocol that is running on top of UDP protocol. cannot change the name once created. This should be set while creating the entry." ::= { rcIpUdpProtocolEntry 2 } rcIpUdpProtocolRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Rowstatus of this entry." ::= { rcIpUdpProtocolEntry 3 } -- Ip Udp Port Forward Table rcIpUdpPortFwdTableSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of entries in the rcIpUdpPortFwdTable." ::= { rcIpUdp 3 } rcIpUdpPortFwdTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpUdpPortFwdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Udp forward entry table." ::= { rcIpUdp 4 } rcIpUdpPortFwdEntry OBJECT-TYPE SYNTAX RcIpUdpPortFwdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry is configured to specify forwarding policy parameters." INDEX { rcIpUdpPortFwdDestPort, rcIpUdpPortFwdDestAddr} ::= { rcIpUdpPortFwdTable 1 } RcIpUdpPortFwdEntry ::= SEQUENCE { rcIpUdpPortFwdDestPort INTEGER, rcIpUdpPortFwdDestAddr IpAddress, rcIpUdpPortFwdId INTEGER, rcIpUdpPortFwdFwdListIdListSize INTEGER (0..32), rcIpUdpPortFwdFwdListIdList IdList(SIZE(16)), rcIpUdpPortFwdNumFwdPackets Counter, rcIpUdpPortFwdNumDropPacketsTtlExpired Counter, rcIpUdpPortFwdNumDropPacketsDestUnreach Counter, rcIpUdpPortFwdRowStatus RowStatus } rcIpUdpPortFwdDestPort OBJECT-TYPE SYNTAX INTEGER(1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The well-known port number defined for UDP/TCP depending on the value of IpProtoType field in this entry. This port number has to be defined in the rcIpUdpProtoTable. In order to select this policy the destination port number has to match the DestPort value." ::= { rcIpUdpPortFwdEntry 1 } rcIpUdpPortFwdDestAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Destination IP address. The IP addres to which the UDP/TCP broadcast should be forwarded. This IP address can be any IP server address or subnet broadcast address. If the IP address is one of the routable interface's address on the router, the frame will be rebroadcast out as a limited broadcast. If the Ip address is that of a server then the received broadcast packet will be sent as a unicast packet to this address." ::= { rcIpUdpPortFwdEntry 2 } rcIpUdpPortFwdId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Identifier of this entry. Used internally to identify this entry." ::= { rcIpUdpPortFwdEntry 3 } rcIpUdpPortFwdFwdListIdListSize OBJECT-TYPE SYNTAX INTEGER (0..32) ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of id(s) in the rcIpUdpPortFwdListId variable." ::= { rcIpUdpPortFwdEntry 4 } rcIpUdpPortFwdFwdListIdList OBJECT-TYPE SYNTAX IdList(SIZE(16)) ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate zero or more rcIpUdpPortFwdListEntry(s) that are referring to this entry. Each list-id identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero." ::= { rcIpUdpPortFwdEntry 5 } rcIpUdpPortFwdNumFwdPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of UDP/TCP broadcast packets forwarded using this policy." ::= { rcIpUdpPortFwdEntry 6 } rcIpUdpPortFwdNumDropPacketsTtlExpired OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of UDP/TCP broadcast packets dropped because the TTL has expired." ::= { rcIpUdpPortFwdEntry 7 } rcIpUdpPortFwdNumDropPacketsDestUnreach OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of UDP/TCP broadcast packets dropped because the rcIpUdpPortFwdDestAddr specified in this policy was unreachable." ::= { rcIpUdpPortFwdEntry 8 } rcIpUdpPortFwdRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Row status of this entry." ::= { rcIpUdpPortFwdEntry 9 } -- Udp Port Fwd List Table rcIpUdpPortFwdListTableSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of entries in the rcIpUdpPortFwdListTable." ::= { rcIpUdp 5 } rcIpUdpPortFwdListTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpUdpPortFwdListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table used to group rcIpUdpPortFwdEntry(s) into a list." ::= { rcIpUdp 6 } rcIpUdpPortFwdListEntry OBJECT-TYPE SYNTAX RcIpUdpPortFwdListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Route entry attributes." INDEX { rcIpUdpPortFwdListId } ::= { rcIpUdpPortFwdListTable 1 } RcIpUdpPortFwdListEntry ::= SEQUENCE { rcIpUdpPortFwdListId INTEGER (1..1000), rcIpUdpPortFwdListName DisplayString (SIZE(0..15)), rcIpUdpPortFwdListFwdIdListSize INTEGER (0..16), rcIpUdpPortFwdListFwdIdList OCTET STRING (SIZE(32)), rcIpUdpPortFwdListRowStatus RowStatus } rcIpUdpPortFwdListId OBJECT-TYPE SYNTAX INTEGER (1..1000) ACCESS read-only STATUS mandatory DESCRIPTION "A value that uniquely identifies this list of rcIpUdpPortFwdListEntry." ::= { rcIpUdpPortFwdListEntry 1 } rcIpUdpPortFwdListName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-write STATUS mandatory DESCRIPTION "An administratively-assigned name for this list." ::= { rcIpUdpPortFwdListEntry 3 } rcIpUdpPortFwdListFwdIdListSize OBJECT-TYPE SYNTAX INTEGER (0..16) ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of rcIpUdpPortFwdNetEntry id(s) in the rcIpUdpPortFwdListIdList variable." ::= { rcIpUdpPortFwdListEntry 4 } rcIpUdpPortFwdListFwdIdList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(32)) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate zero or more UdpPortFwd entries that are associated to this list. Each entry identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero." ::= { rcIpUdpPortFwdListEntry 5 } rcIpUdpPortFwdListRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Row status of this entry." ::= { rcIpUdpPortFwdListEntry 6 } -- Ip Config Broadcast Forwarding Table rcIpUdpConfBroadcastIntfTableSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of entries in the rcIpUdpBroadcastIntfTable." ::= { rcIpUdp 7 } rcIpUdpConfBroadcastIntfTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpUdpConfBroadcastIntfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IP broadcast forward configuration table" ::= { rcIpUdp 8 } rcIpUdpConfBroadcastIntfEntry OBJECT-TYPE SYNTAX RcIpUdpConfBroadcastIntfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Used to configure UDP broadcast forward on a particular interface." INDEX { rcIpUdpConfBroadcastIntfLocalIfAddr } ::= { rcIpUdpConfBroadcastIntfTable 1 } RcIpUdpConfBroadcastIntfEntry ::= SEQUENCE { rcIpUdpConfBroadcastIntfLocalIfAddr IpAddress, rcIpUdpConfBroadcastIntfUdpPortFwdListId INTEGER (0..100), rcIpUdpConfBroadcastIntfMaxTtl INTEGER (1..16), rcIpUdpConfBroadcastIntfNumRxPkts Counter, rcIpUdpConfBroadcastIntfNumFwdPkts Counter, rcIpUdpConfBroadcastIntfNumDropPktsMaxTtlExpired Counter, rcIpUdpConfBroadcastIntfNumDropPktsDestUnreach Counter, rcIpUdpConfBroadcastIntfNumDropPktsUnknownPort Counter, rcIpUdpConfBroadcastIntfRowStatus RowStatus } rcIpUdpConfBroadcastIntfLocalIfAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The ip address of the local interface that is partipating in the forwarding UDP broadcast packets." ::= { rcIpUdpConfBroadcastIntfEntry 1 } rcIpUdpConfBroadcastIntfUdpPortFwdListId OBJECT-TYPE SYNTAX INTEGER (0..100) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate the number UDP ports that this interface is configured to forward. A value of '0' indicates that this interface will not forward any UDP broadcast packets. This is a required field to create an entry." ::= { rcIpUdpConfBroadcastIntfEntry 2 } rcIpUdpConfBroadcastIntfMaxTtl OBJECT-TYPE SYNTAX INTEGER (1..16) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate the maximum number of hops an IP broadcast packet can take from the source device to the destination device." DEFVAL { 4 } ::= { rcIpUdpConfBroadcastIntfEntry 3 } rcIpUdpConfBroadcastIntfNumRxPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of UDP/TCP broadcast packets received by this local interface." ::= { rcIpUdpConfBroadcastIntfEntry 4 } rcIpUdpConfBroadcastIntfNumFwdPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of UDP/TCP broadcast packets forwarded." ::= { rcIpUdpConfBroadcastIntfEntry 5 } rcIpUdpConfBroadcastIntfNumDropPktsMaxTtlExpired OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of UDP/TCP broadcast packets dropped because the TTL has expired." ::= { rcIpUdpConfBroadcastIntfEntry 6 } rcIpUdpConfBroadcastIntfNumDropPktsDestUnreach OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of UDP broadcast packets dropped because the destination was unreachable." ::= { rcIpUdpConfBroadcastIntfEntry 7 } rcIpUdpConfBroadcastIntfNumDropPktsUnknownPort OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of UDP/TCP broadcast packets dropped because the destination port/protocol specified has no matching forwarding policy." ::= { rcIpUdpConfBroadcastIntfEntry 8 } rcIpUdpConfBroadcastIntfRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Entry row status." ::= { rcIpUdpConfBroadcastIntfEntry 9 } --IP ToS Rule rcIpTosRule OBJECT IDENTIFIER ::= { rcIp 14} --excluded rcIpTosRuleAndMask OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS deprecated DESCRIPTION "And Mask. The Ip ToS byte in the Ip header is logically ANDed with this value, and then logically ORed with the one of the OrRules below." ::= { rcIpTosRule 1 } rcIpTosRuleOrRule1 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS deprecated DESCRIPTION "Quid/Gid Or rule #1. The Ip ToS byte in the Ip header is logically ORed with this value." ::= { rcIpTosRule 2 } rcIpTosRuleOrRule2 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS deprecated DESCRIPTION "Quid/Gid Or rule #2. The Ip ToS byte in the Ip header is logically ORed with this value." ::= { rcIpTosRule 3 } rcIpTosRuleOrRule3 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS deprecated DESCRIPTION "Quid/Gid Or rule #3. The Ip ToS byte in the Ip header is logically ORed with this value." ::= { rcIpTosRule 4 } rcIpTosRuleTosPriorityEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Enable Tos priority." ::= { rcIpTosRule 5 } rcIpTosRuleTosThreshold OBJECT-TYPE SYNTAX INTEGER { level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7) } ACCESS read-only STATUS mandatory DESCRIPTION "tos threshold" ::= { rcIpTosRule 6 } --IP Static Route rcIpStaticRoute OBJECT IDENTIFIER ::= { rcIp 15} rcIpStaticRouteTableSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "size of Ip Static Route Table." ::= { rcIpStaticRoute 1 } rcIpStaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpStaticRouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is used to add static IP routes to the device. Routes added into this table will automatically show-up in the 'rcIpRouteTable' when the device is actively using the route to forward IP traffic." ::= { rcIpStaticRoute 2 } rcIpStaticRouteEntry OBJECT-TYPE SYNTAX RcIpStaticRouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A static route to a particular destination." INDEX { rcIpStaticRouteDest, rcIpStaticRouteMask, rcIpStaticRouteNextHop } ::= { rcIpStaticRouteTable 1 } RcIpStaticRouteEntry ::= SEQUENCE { rcIpStaticRouteDest IpAddress, rcIpStaticRouteMask IpAddress, rcIpStaticRouteNextHop IpAddress, rcIpStaticRouteMetric INTEGER (1..'FFFF'h), rcIpStaticRouteIfIndex InterfaceIndex, rcIpStaticRoutePreference INTEGER (1..16), rcIpStaticRouteEnable TruthValue, rcIpStaticRouteStatus INTEGER, rcIpStaticRouteRowStatus RowStatus, rcIpStaticRouteLocalNextHop TruthValue } rcIpStaticRouteDest OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use." ::= { rcIpStaticRouteEntry 1 } rcIpStaticRouteMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the rcIpRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the rcIpRouteMask by determining whether the value of the correspondent rcIpRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.0 class-C If the value of the rcIpRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism." ::= { rcIpStaticRouteEntry 2 } rcIpStaticRouteNextHop OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface)." ::= { rcIpStaticRouteEntry 3 } rcIpStaticRouteMetric OBJECT-TYPE SYNTAX INTEGER (1..'FFFF'h) ACCESS read-write STATUS mandatory DESCRIPTION "The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rcIpRouteProto value. If this metric is not used, its value should be set to -1." DEFVAL { 1 } ::= { rcIpStaticRouteEntry 4 } rcIpStaticRouteIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { rcIpStaticRouteEntry 5 } rcIpStaticRoutePreference OBJECT-TYPE SYNTAX INTEGER (1..16) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate the route preference of this entry. If there are more than one route that can be used to forward IP traffic, the route that has a highest preference will be used instead of a lower preference one. The higher the number, the higher the preference." DEFVAL { 16 } ::= { rcIpStaticRouteEntry 6 } rcIpStaticRouteEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to enable/disable this entry." DEFVAL { true } ::= { rcIpStaticRouteEntry 7 } rcIpStaticRouteStatus OBJECT-TYPE SYNTAX INTEGER { inactive(0), active(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the current status of this entry." DEFVAL { active } ::= { rcIpStaticRouteEntry 8 } rcIpStaticRouteRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Used to create/delete entries" ::= { rcIpStaticRouteEntry 9 } rcIpStaticRouteLocalNextHop OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to enable/disable this entry. True indicate that the static route becomes active only if switch has a local route to the network. False indicates that the static route becomes active if switch has a local route or dynamic route." DEFVAL { true } ::= { rcIpStaticRouteEntry 10 } --IP PIM rcIpPim OBJECT IDENTIFIER ::= { rcIp 16 } --excluded rcIpPimGlobal OBJECT IDENTIFIER ::= { rcIpPim 1} rcIpPimGlobalEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "enable feature" ::= { rcIpPimGlobal 1 } rcIpPimTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpPimEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IP Pim table" ::= { rcIpPim 2 } rcIpPimEntry OBJECT-TYPE SYNTAX RcIpPimEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of Ip Pim Table." INDEX { rcIpPimIfIndex } ::= { rcIpPimTable 1 } RcIpPimEntry ::= SEQUENCE { rcIpPimIfIndex InterfaceIndex, rcIpPimEnable TruthValue, rcIpPimMode INTEGER, rcIpPimHelloInterval INTEGER, rcIpPimJoinPruneInterval INTEGER, rcIpPimCBSRPreference INTEGER } rcIpPimIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "port" ::= { rcIpPimEntry 1 } rcIpPimEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "enable interface" ::= { rcIpPimEntry 2 } rcIpPimMode OBJECT-TYPE SYNTAX INTEGER { dense(1), sparse(2), sparseDense(3) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpPimEntry 3 } rcIpPimHelloInterval OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "frq. at which hello sent." ::= { rcIpPimEntry 4 } rcIpPimJoinPruneInterval OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpPimEntry 5 } rcIpPimCBSRPreference OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpPimEntry 6 } --IP Multicast Arp table rcIpMulticastArpTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpMulticastArpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IP Multicast Arp table" ::= { rcIp 17 } rcIpMulticastArpEntry OBJECT-TYPE SYNTAX RcIpMulticastArpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of Ip Multicast Arp Table." INDEX { rcIpMulticastArpVlanId, rcIpMulticastArpMacAddress, rcIpMulticastArpIpAddress } ::= { rcIpMulticastArpTable 1 } RcIpMulticastArpEntry ::= SEQUENCE { rcIpMulticastArpVlanId INTEGER, rcIpMulticastArpMacAddress MacAddress, rcIpMulticastArpIpAddress IpAddress, rcIpMulticastArpPorts PortSet, rcIpMulticastArpNumMltIds INTEGER, rcIpMulticastArpMltIds IdList, rcIpMulticastArpRowStatus RowStatus } rcIpMulticastArpVlanId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "vlan id" ::= { rcIpMulticastArpEntry 1 } rcIpMulticastArpMacAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "multicast mac address" ::= { rcIpMulticastArpEntry 2 } rcIpMulticastArpIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "multicast ip address" ::= { rcIpMulticastArpEntry 3 } rcIpMulticastArpPorts OBJECT-TYPE SYNTAX PortSet ACCESS read-write STATUS mandatory DESCRIPTION "ports within a particular vlan" ::= { rcIpMulticastArpEntry 4 } rcIpMulticastArpNumMltIds OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of mlt ids" ::= { rcIpMulticastArpEntry 5 } rcIpMulticastArpMltIds OBJECT-TYPE SYNTAX IdList ACCESS read-write STATUS mandatory DESCRIPTION "mlt id" ::= { rcIpMulticastArpEntry 6 } rcIpMulticastArpRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "row status" ::= { rcIpMulticastArpEntry 7 } --IP Multicast Table rcIpMulticastTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpMulticastEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "Ip multicast table." ::= { rcIp 18 } rcIpMulticastEntry OBJECT-TYPE SYNTAX RcIpMulticastEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing Proprietary Ip Multicast information." INDEX { rcIpMulticastIfIndex } ::= { rcIpMulticastTable 1 } RcIpMulticastEntry ::= SEQUENCE { rcIpMulticastIfIndex InterfaceIndex, rcIpMulticastMulticastIp IpAddress } rcIpMulticastIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "IfIndex." ::= { rcIpMulticastEntry 1 } rcIpMulticastMulticastIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "IP Address on this IfIndex to be used for all Multicast protocols running on this interface." ::= { rcIpMulticastEntry 2 } -- IP COPS Global rcIpCops OBJECT IDENTIFIER ::= { rcIp 19 } rcCopsGlobalEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Cops feature enable/disable" ::= { rcIpCops 1 } --IP Gen Policy rcIpGenPolicy OBJECT IDENTIFIER ::= { rcIp 100 } -- Ip As Path Access List Table rcIpAsPathAccessListTableSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "table size" ::= { rcIpGenPolicy 1 } rcIpAsPathAccessListTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpAsPathAccessListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IP As Path Access List table" ::= { rcIpGenPolicy 2 } rcIpAsPathAccessListEntry OBJECT-TYPE SYNTAX RcIpAsPathAccessListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of Ip As Path Access List Table." INDEX { rcIpAsPathAccessListId, rcIpAsPathAccessListMemberId } ::= { rcIpAsPathAccessListTable 1 } RcIpAsPathAccessListEntry ::= SEQUENCE { rcIpAsPathAccessListId INTEGER, rcIpAsPathAccessListMemberId INTEGER, rcIpAsPathAccessListMode INTEGER, rcIpAsPathAccessListAsRegularExpression DisplayString, rcIpAsPathAccessListRowStatus RowStatus } rcIpAsPathAccessListId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { rcIpAsPathAccessListEntry 1 } rcIpAsPathAccessListMemberId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "frq. at which hello sent." ::= { rcIpAsPathAccessListEntry 2 } rcIpAsPathAccessListMode OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpAsPathAccessListEntry 3 } rcIpAsPathAccessListAsRegularExpression OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpAsPathAccessListEntry 4 } rcIpAsPathAccessListRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpAsPathAccessListEntry 5 } -- Ip Community Access List Table rcIpCommunityAccessListTableSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "table size" ::= { rcIpGenPolicy 3 } rcIpCommunityAccessListTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpCommunityAccessListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IP CommunityAccess List table" ::= { rcIpGenPolicy 4 } rcIpCommunityAccessListEntry OBJECT-TYPE SYNTAX RcIpCommunityAccessListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of Ip CommunityAccess List Table." INDEX { rcIpCommunityAccessListId, rcIpCommunityAccessListMemberId } ::= { rcIpCommunityAccessListTable 1 } RcIpCommunityAccessListEntry ::= SEQUENCE { rcIpCommunityAccessListId INTEGER, rcIpCommunityAccessListMemberId INTEGER, rcIpCommunityAccessListMode INTEGER, rcIpCommunityAccessListCommunity DisplayString, rcIpCommunityAccessListRowStatus RowStatus } rcIpCommunityAccessListId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { rcIpCommunityAccessListEntry 1 } rcIpCommunityAccessListMemberId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "frq. at which hello sent." ::= { rcIpCommunityAccessListEntry 2 } rcIpCommunityAccessListMode OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpCommunityAccessListEntry 3 } rcIpCommunityAccessListCommunity OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpCommunityAccessListEntry 4 } rcIpCommunityAccessListRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpCommunityAccessListEntry 5 } -- Ip Access List Table rcIpAccessListTableSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "table size" ::= { rcIpGenPolicy 5 } rcIpAccessListTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpAccessListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IP Access List table" ::= { rcIpGenPolicy 6 } rcIpAccessListEntry OBJECT-TYPE SYNTAX RcIpAccessListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of Ip Access List Table." INDEX { rcIpAccessListId, rcIpAccessListMode, rcIpAccessListNetwork, rcIpAccessListNetworkMask } ::= { rcIpAccessListTable 1 } RcIpAccessListEntry ::= SEQUENCE { rcIpAccessListId INTEGER, rcIpAccessListMode INTEGER, rcIpAccessListNetwork IpAddress, rcIpAccessListNetworkMask IpAddress, rcIpAccessListName DisplayString, rcIpAccessListRowStatus RowStatus } rcIpAccessListId OBJECT-TYPE SYNTAX INTEGER (1..99) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { rcIpAccessListEntry 1 } rcIpAccessListMode OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { rcIpAccessListEntry 2 } rcIpAccessListNetwork OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpAccessListEntry 3 } rcIpAccessListNetworkMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpAccessListEntry 4 } rcIpAccessListName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpAccessListEntry 5 } rcIpAccessListRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpAccessListEntry 6 } -- Ip Extended Access List Table rcIpExtendedAccessListTableSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "table size" ::= { rcIpGenPolicy 7 } rcIpExtendedAccessListTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpExtendedAccessListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IP Extended Access List table" ::= { rcIpGenPolicy 8 } rcIpExtendedAccessListEntry OBJECT-TYPE SYNTAX RcIpExtendedAccessListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of Ip Extended Access List Table." INDEX { rcIpExtendedAccessListId, rcIpExtendedAccessListMode, rcIpExtendedAccessListNetwork, rcIpExtendedAccessListNetworkWildCard, rcIpExtendedAccessListNetworkMask, rcIpExtendedAccessListNetworkMaskWildCard } ::= { rcIpExtendedAccessListTable 1 } RcIpExtendedAccessListEntry ::= SEQUENCE { rcIpExtendedAccessListId INTEGER, rcIpExtendedAccessListMode INTEGER, rcIpExtendedAccessListNetwork IpAddress, rcIpExtendedAccessListNetworkWildCard IpAddress, rcIpExtendedAccessListNetworkMask IpAddress, rcIpExtendedAccessListNetworkMaskWildCard IpAddress, rcIpExtendedAccessListName DisplayString, rcIpExtendedAccessListRowStatus RowStatus } rcIpExtendedAccessListId OBJECT-TYPE SYNTAX INTEGER (100..199) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { rcIpExtendedAccessListEntry 1 } rcIpExtendedAccessListMode OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { rcIpExtendedAccessListEntry 2 } rcIpExtendedAccessListNetwork OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { rcIpExtendedAccessListEntry 3 } rcIpExtendedAccessListNetworkWildCard OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { rcIpExtendedAccessListEntry 4 } rcIpExtendedAccessListNetworkMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { rcIpExtendedAccessListEntry 5 } rcIpExtendedAccessListNetworkMaskWildCard OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { rcIpExtendedAccessListEntry 6 } rcIpExtendedAccessListName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpExtendedAccessListEntry 7 } rcIpExtendedAccessListRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpExtendedAccessListEntry 8 } -- Ip Prefix List Table rcIpPrefixListTableSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "table size" ::= { rcIpGenPolicy 9 } rcIpPrefixListTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpPrefixListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IP Prefix List table" ::= { rcIpGenPolicy 10 } rcIpPrefixListEntry OBJECT-TYPE SYNTAX RcIpPrefixListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of Ip Prefix List Table." INDEX { rcIpPrefixListId, rcIpPrefixListSequenceNumber, rcIpPrefixListPrefix, rcIpPrefixListPrefixMaskLen } ::= { rcIpPrefixListTable 1 } RcIpPrefixListEntry ::= SEQUENCE { rcIpPrefixListId INTEGER, rcIpPrefixListSequenceNumber INTEGER, rcIpPrefixListMode INTEGER, rcIpPrefixListPrefix IpAddress, rcIpPrefixListPrefixMaskLen INTEGER, rcIpPrefixListGreaterThanValue INTEGER, rcIpPrefixListLessThanValue INTEGER, rcIpPrefixListName DisplayString, rcIpPrefixListRowStatus RowStatus } rcIpPrefixListId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "ListId" ::= { rcIpPrefixListEntry 1 } rcIpPrefixListSequenceNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Sequence Number" ::= { rcIpPrefixListEntry 2 } rcIpPrefixListMode OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { rcIpPrefixListEntry 3 } rcIpPrefixListPrefix OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "prefix number" ::= { rcIpPrefixListEntry 4 } rcIpPrefixListPrefixMaskLen OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "prefix mask length" ::= { rcIpPrefixListEntry 5 } rcIpPrefixListGreaterThanValue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "greater than" ::= { rcIpPrefixListEntry 6 } rcIpPrefixListLessThanValue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "less than" ::= { rcIpPrefixListEntry 7 } rcIpPrefixListName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "list name" ::= { rcIpPrefixListEntry 8 } rcIpPrefixListRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "row status" ::= { rcIpPrefixListEntry 9 } rcIpPrefixListSeqNumberEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Enable automatic seq# generation." ::= { rcIpGenPolicy 11 } -- Ip Route Map Table rcIpRouteMapTableSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "table size" ::= { rcIpGenPolicy 12 } rcIpRouteMapTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpRouteMapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IP Route Map table" ::= { rcIpGenPolicy 13 } rcIpRouteMapEntry OBJECT-TYPE SYNTAX RcIpRouteMapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of Ip Route Map Table." INDEX { rcIpRouteMapId, rcIpRouteMapSequenceNumber } ::= { rcIpRouteMapTable 1 } RcIpRouteMapEntry ::= SEQUENCE { rcIpRouteMapId INTEGER, rcIpRouteMapSequenceNumber INTEGER, rcIpRouteMapName DisplayString, rcIpRouteMapMode INTEGER, rcIpRouteMapMatchAsPathListId INTEGER, rcIpRouteMapMatchCommunityListId INTEGER, rcIpRouteMapMatchCommunityExact EnableValue, rcIpRouteMapMatchInterfaceNumber INTEGER, rcIpRouteMapMatchIpAddress IdList, rcIpRouteMapMatchIpRouteSource IdList, rcIpRouteMapMatchNextHop IdList, rcIpRouteMapMatchRouteType INTEGER, rcIpRouteMapMatchMetric INTEGER, rcIpRouteMapMatchTag DisplayString, rcIpRouteMapSetAsPath DisplayString, rcIpRouteMapSetAsPathMode INTEGER, rcIpRouteMapSetAutomaticTag EnableValue, rcIpRouteMapSetCommunityNumber INTEGER, rcIpRouteMapSetCommunityMode INTEGER, rcIpRouteMapSetCommunityDelListId INTEGER, rcIpRouteMapSetDampening EnableValue, rcIpRouteMapSetDampeningHalflife INTEGER, rcIpRouteMapSetDampeningReuse INTEGER, rcIpRouteMapSetDampeningSuppress INTEGER, rcIpRouteMapSetDampeningMaxSuppressTime INTEGER, rcIpRouteMapSetMetricTypeInternal INTEGER, rcIpRouteMapSetMetric INTEGER, rcIpRouteMapSetMetricType INTEGER, rcIpRouteMapSetNextHop IpAddress, rcIpRouteMapSetOrigin INTEGER, rcIpRouteMapSetOriginEgpAs INTEGER, rcIpRouteMapSetTag INTEGER, rcIpRouteMapSetWeight INTEGER, rcIpRouteMapRowStatus RowStatus } rcIpRouteMapId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Route map id" ::= { rcIpRouteMapEntry 1 } rcIpRouteMapSequenceNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Sequence Number" ::= { rcIpRouteMapEntry 2 } rcIpRouteMapName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Route map name" ::= { rcIpRouteMapEntry 3 } rcIpRouteMapMode OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpRouteMapEntry 4 } rcIpRouteMapMatchAsPathListId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpRouteMapEntry 5 } rcIpRouteMapMatchCommunityListId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpRouteMapEntry 6 } rcIpRouteMapMatchCommunityExact OBJECT-TYPE SYNTAX EnableValue ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpRouteMapEntry 7 } rcIpRouteMapMatchInterfaceNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpRouteMapEntry 8 } rcIpRouteMapMatchIpAddress OBJECT-TYPE SYNTAX IdList ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpRouteMapEntry 9 } rcIpRouteMapMatchIpRouteSource OBJECT-TYPE SYNTAX IdList ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpRouteMapEntry 10 } rcIpRouteMapMatchNextHop OBJECT-TYPE SYNTAX IdList ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpRouteMapEntry 11 } rcIpRouteMapMatchRouteType OBJECT-TYPE SYNTAX INTEGER { none(0), local(1), internal(2), external(3), externaltype1(4), externaltype2(5) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpRouteMapEntry 12 } rcIpRouteMapMatchMetric OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Match metric of the route." ::= { rcIpRouteMapEntry 13 } rcIpRouteMapMatchTag OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "contains one or more tag values.." ::= { rcIpRouteMapEntry 14 } rcIpRouteMapSetAsPath OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "as-path string.." ::= { rcIpRouteMapEntry 15 } rcIpRouteMapSetAsPathMode OBJECT-TYPE SYNTAX INTEGER { tag(1), prepend(2) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpRouteMapEntry 16 } rcIpRouteMapSetAutomaticTag OBJECT-TYPE SYNTAX EnableValue ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpRouteMapEntry 17 } rcIpRouteMapSetCommunityNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "community number." ::= { rcIpRouteMapEntry 18 } rcIpRouteMapSetCommunityMode OBJECT-TYPE SYNTAX INTEGER { none(0), append(1) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpRouteMapEntry 19 } rcIpRouteMapSetCommunityDelListId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpRouteMapEntry 20 } rcIpRouteMapSetDampening OBJECT-TYPE SYNTAX EnableValue ACCESS read-write STATUS mandatory DESCRIPTION "enable/disable route dampening for the routes that passed match criteria" ::= { rcIpRouteMapEntry 21 } rcIpRouteMapSetDampeningHalflife OBJECT-TYPE SYNTAX INTEGER (1..45) ACCESS read-write STATUS mandatory DESCRIPTION "" DEFVAL { 15 } ::= { rcIpRouteMapEntry 22 } rcIpRouteMapSetDampeningReuse OBJECT-TYPE SYNTAX INTEGER (1..20000) ACCESS read-write STATUS mandatory DESCRIPTION "penalty value" DEFVAL { 750 } ::= { rcIpRouteMapEntry 23 } rcIpRouteMapSetDampeningSuppress OBJECT-TYPE SYNTAX INTEGER (1..20000) ACCESS read-write STATUS mandatory DESCRIPTION "penalty value" DEFVAL { 2000 } ::= { rcIpRouteMapEntry 24 } rcIpRouteMapSetDampeningMaxSuppressTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "time in minutes." DEFVAL { 60 } ::= { rcIpRouteMapEntry 25 } rcIpRouteMapSetMetricTypeInternal OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpRouteMapEntry 26 } rcIpRouteMapSetMetric OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpRouteMapEntry 27 } rcIpRouteMapSetMetricType OBJECT-TYPE SYNTAX INTEGER { type1(1), type2(2) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpRouteMapEntry 28 } rcIpRouteMapSetNextHop OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "IpAddress of the next hop router." ::= { rcIpRouteMapEntry 29 } rcIpRouteMapSetOrigin OBJECT-TYPE SYNTAX INTEGER { igp(1), egp(2), incomplete(3) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpRouteMapEntry 30 } rcIpRouteMapSetOriginEgpAs OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Remote Autonomous system number." ::= { rcIpRouteMapEntry 31 } rcIpRouteMapSetTag OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpRouteMapEntry 32 } rcIpRouteMapSetWeight OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpRouteMapEntry 33 } rcIpRouteMapRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "row status" ::= { rcIpRouteMapEntry 34 } -- Ip Redistribute Table rcIpRedistributeTableSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "table size" ::= { rcIpGenPolicy 14 } rcIpRedistributeTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpRedistributeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IP Redistribute table" ::= { rcIpGenPolicy 15 } rcIpRedistributeEntry OBJECT-TYPE SYNTAX RcIpRedistributeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of Ip Redistribute Table." INDEX { rcIpRedistributeRouteSource, rcIpRedistributeProtocol } ::= { rcIpRedistributeTable 1 } RcIpRedistributeEntry ::= SEQUENCE { rcIpRedistributeRouteSource INTEGER, rcIpRedistributeProtocol INTEGER, rcIpRedistributeMetric INTEGER, rcIpRedistributeMetricType INTEGER, rcIpRedistributeMatchRouteType INTEGER, rcIpRedistributeSetTag INTEGER, rcIpRedistributeSubnets INTEGER, rcIpRedistributeRouteMap DisplayString, rcIpRedistributeASNumber INTEGER, rcIpRedistributeWeight INTEGER, rcIpRedistributeDefaultOriginate INTEGER, rcIpRedistributeRowStatus RowStatus } rcIpRedistributeRouteSource OBJECT-TYPE SYNTAX INTEGER { connected(1), static(2), rip(3), ospf(4), bgp(5) } ACCESS read-only STATUS mandatory DESCRIPTION "Route map id" ::= { rcIpRedistributeEntry 1 } rcIpRedistributeProtocol OBJECT-TYPE SYNTAX INTEGER { rip(1), ospf(2), bgp(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Protocol" ::= { rcIpRedistributeEntry 2 } rcIpRedistributeMetric OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpRedistributeEntry 3 } rcIpRedistributeMetricType OBJECT-TYPE SYNTAX INTEGER { type1(1), type2(2) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpRedistributeEntry 4 } rcIpRedistributeMatchRouteType OBJECT-TYPE SYNTAX INTEGER { internal(1), external1(2), external2(3) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpRedistributeEntry 5 } rcIpRedistributeSetTag OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpRedistributeEntry 6 } rcIpRedistributeSubnets OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "for OSPF only" ::= { rcIpRedistributeEntry 7 } rcIpRedistributeRouteMap OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Route map name" ::= { rcIpRedistributeEntry 8 } rcIpRedistributeASNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Autonomous system number" ::= { rcIpRedistributeEntry 9 } rcIpRedistributeWeight OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpRedistributeEntry 10 } rcIpRedistributeDefaultOriginate OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpRedistributeEntry 11 } rcIpRedistributeRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "row status" ::= { rcIpRedistributeEntry 12 } -- IP Distribute In Table rcIpDistributeInTableSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "table size" ::= { rcIpGenPolicy 16 } rcIpDistributeInTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpDistributeInEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IP Distribute In table" ::= { rcIpGenPolicy 17 } rcIpDistributeInEntry OBJECT-TYPE SYNTAX RcIpDistributeInEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of Ip Distribute In Table." INDEX { rcIpDistributeInProtocol, rcIpDistributeInInterfaceNumber } ::= { rcIpDistributeInTable 1 } RcIpDistributeInEntry ::= SEQUENCE { rcIpDistributeInProtocol INTEGER, rcIpDistributeInInterfaceNumber InterfaceIndex, rcIpDistributeInIpAccessListId INTEGER } rcIpDistributeInProtocol OBJECT-TYPE SYNTAX INTEGER { rip(1), ospf(2), bgp(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Protocol" ::= { rcIpDistributeInEntry 1 } rcIpDistributeInInterfaceNumber OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-write STATUS mandatory DESCRIPTION "IfIndex" ::= { rcIpDistributeInEntry 2 } rcIpDistributeInIpAccessListId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpDistributeInEntry 3 } -- IP Distribute Out Table rcIpDistributeOutTableSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "table size" ::= { rcIpGenPolicy 18 } rcIpDistributeOutTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpDistributeOutEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IP Distribute Out table" ::= { rcIpGenPolicy 19 } rcIpDistributeOutEntry OBJECT-TYPE SYNTAX RcIpDistributeOutEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of Ip Distribute In Table." INDEX { rcIpDistributeOutProtocol, rcIpDistributeOutInterfaceNumber, rcIpDistributeOutRouteSource } ::= { rcIpDistributeOutTable 1 } RcIpDistributeOutEntry ::= SEQUENCE { rcIpDistributeOutProtocol INTEGER, rcIpDistributeOutInterfaceNumber InterfaceIndex, rcIpDistributeOutRouteSource INTEGER, rcIpDistributeOutIpAccessListId INTEGER } rcIpDistributeOutProtocol OBJECT-TYPE SYNTAX INTEGER { rip(1), ospf(2), bgp(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Protocol" ::= { rcIpDistributeOutEntry 1 } rcIpDistributeOutInterfaceNumber OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-write STATUS mandatory DESCRIPTION "IfIndex" ::= { rcIpDistributeOutEntry 2 } rcIpDistributeOutRouteSource OBJECT-TYPE SYNTAX INTEGER { static(1), connected(2), rip(3), ospf(4), bgp(5) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpDistributeOutEntry 3 } rcIpDistributeOutIpAccessListId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpDistributeOutEntry 4 } -- Ip BGP rcIpBgp OBJECT IDENTIFIER ::= { rcIp 101 } rcIpBgpGeneralGroup OBJECT IDENTIFIER ::= { rcIpBgp 1 } rcIpBgpGeneralGroupLocalAs OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Autonomous system number" ::= { rcIpBgpGeneralGroup 1 } rcIpBgpGeneralGroupAdminStatus OBJECT-TYPE SYNTAX EnableValue ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpGeneralGroup 2 } rcIpBgpGeneralGroupSynchronization OBJECT-TYPE SYNTAX EnableValue ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpGeneralGroup 3 } rcIpBgpGeneralGroupAction OBJECT-TYPE SYNTAX INTEGER { none(0), resetallpeers(1) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpGeneralGroup 4 } rcIpBgpGeneralGroupDefaultMetric OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Set the value to MED." ::= { rcIpBgpGeneralGroup 5 } rcIpBgpGeneralGroupFastExternalFallover OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Automatically reset the ebgp session upon detecting link failure." ::= { rcIpBgpGeneralGroup 6 } rcIpBgpGeneralGroupTableMap OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "RouteMap name to be applied while updating the IP routing table with bgp routes. (modify metric & tag)." ::= { rcIpBgpGeneralGroup 7 } rcIpBgpGeneralGroupKeepAliveTimer OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Global KeepAlive Timer value." ::= { rcIpBgpGeneralGroup 8 } rcIpBgpGeneralGroupHoldDownTimer OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Global HoldDown Timer value." ::= { rcIpBgpGeneralGroup 9 } rcIpBgpGeneralGroupDefaultLocalPreference OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Local preference Attribute value." ::= { rcIpBgpGeneralGroup 10 } rcIpBgpGeneralGroupDefaultInformationOriginate OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "allow the redist ri-bution of default route into BGP." ::= { rcIpBgpGeneralGroup 11 } rcIpBgpGeneralGroupBestPathAsPathComp OBJECT-TYPE SYNTAX EnableValue ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpGeneralGroup 12 } rcIpBgpGeneralGroupBestPathMissingAsWorst OBJECT-TYPE SYNTAX EnableValue ACCESS read-write STATUS mandatory DESCRIPTION "enable indicates a path missing MED means AsPathLenght of infinity this makes the path least desirable." ::= { rcIpBgpGeneralGroup 13 } rcIpBgpGeneralGroupBestPathMedConfed OBJECT-TYPE SYNTAX EnableValue ACCESS read-write STATUS mandatory DESCRIPTION "consider MED in selecting a path." ::= { rcIpBgpGeneralGroup 14 } rcIpBgpGeneralGroupAlwaysCompareMed OBJECT-TYPE SYNTAX EnableValue ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpGeneralGroup 15 } rcIpBgpGeneralGroupDeterministicMed OBJECT-TYPE SYNTAX EnableValue ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpGeneralGroup 16 } rcIpBgpAdminstrativeDistanceGroup OBJECT IDENTIFIER ::= { rcIpBgp 2 } rcIpBgpAdminstrativeDistanceExternalDistance OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "routes learned from external bgp nbrs" ::= { rcIpBgpAdminstrativeDistanceGroup 1 } rcIpBgpAdminstrativeDistanceInternalDistance OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "routes learned from internal bgp nbrs" ::= { rcIpBgpAdminstrativeDistanceGroup 2 } rcIpBgpAdminstrativeDistanceLocalDistance OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "routes local bgp routes (part of localAS)" ::= { rcIpBgpAdminstrativeDistanceGroup 3 } rcIpBgpAggregateAddressGroup OBJECT IDENTIFIER ::= { rcIpBgp 3 } rcIpBgpAggregateAddressEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "True/False - aggregation" ::= { rcIpBgpAggregateAddressGroup 1 } rcIpBgpAggregateAddressMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "mask value" ::= { rcIpBgpAggregateAddressGroup 2 } rcIpBgpAggregateAddressAsSetGenerate OBJECT-TYPE SYNTAX EnableValue ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpAggregateAddressGroup 3 } rcIpBgpAggregateAddressSummaryOnly OBJECT-TYPE SYNTAX EnableValue ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpAggregateAddressGroup 4 } rcIpBgpAggregateAddressSuppressMap OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpAggregateAddressGroup 5 } rcIpBgpAggregateAddressAdvertiseMap OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpAggregateAddressGroup 6 } rcIpBgpAggregateAddressAttributeMap OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpAggregateAddressGroup 7 } rcIpBgpConfederationGroup OBJECT IDENTIFIER ::= { rcIpBgp 4 } rcIpBgponfederationIdentifier OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "TAutonomous system number" ::= { rcIpBgpConfederationGroup 1 } rcIpBgponfederationPeerASList OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpConfederationGroup 2 } rcIpBgpRouteReflectorGroup OBJECT IDENTIFIER ::= { rcIpBgp 5 } rcIpBgpRouteReflectorClusterId OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "4-byte clusterID" ::= { rcIpBgpRouteReflectorGroup 1 } rcIpBgpRouteReflectorClientToClientReflection OBJECT-TYPE SYNTAX EnableValue ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpRouteReflectorGroup 2 } rcIpBgpRouteDampeningGroup OBJECT IDENTIFIER ::= { rcIpBgp 6 } rcIpBgpRouteDampeningEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpRouteDampeningGroup 1 } rcIpBgpRouteDampeningHalfLifeValue OBJECT-TYPE SYNTAX INTEGER (1..45) ACCESS read-write STATUS mandatory DESCRIPTION "Time in minutes" DEFVAL { 15 } ::= { rcIpBgpRouteDampeningGroup 2 } rcIpBgpRouteDampeningReUseValue OBJECT-TYPE SYNTAX INTEGER (1..20000) ACCESS read-write STATUS mandatory DESCRIPTION "Penalty value" DEFVAL { 750 } ::= { rcIpBgpRouteDampeningGroup 3 } rcIpBgpRouteDampeningSuppress OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Suppress Value" DEFVAL { 2000 } ::= { rcIpBgpRouteDampeningGroup 4 } rcIpBgpRouteDampeningSuppressMax OBJECT-TYPE SYNTAX INTEGER (1..20000) ACCESS read-write STATUS mandatory DESCRIPTION "time in minutes" DEFVAL { 60 } ::= { rcIpBgpRouteDampeningGroup 5 } rcIpBgpRouteDampeningRouteMap OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Route map name to be used to" ::= { rcIpBgpRouteDampeningGroup 6 } -- IP Bdp Networks Table rcIpBgpNetworkTableSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "table size" ::= { rcIpBgp 7 } rcIpBgpNetworkTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpBgpNetworkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IP Bdp Networks table" ::= { rcIpBgp 8 } rcIpBgpNetworkEntry OBJECT-TYPE SYNTAX RcIpBgpNetworkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of Ip Bdp In Table." INDEX { rcIpBgpNetworkNetAddr, rcIpBgpNetworkMask } ::= { rcIpBgpNetworkTable 1 } RcIpBgpNetworkEntry ::= SEQUENCE { rcIpBgpNetworkNetAddr IpAddress, rcIpBgpNetworkMask IpAddress, rcIpBgpNetworkWeight INTEGER, rcIpBgpNetworkRouteMap DisplayString } rcIpBgpNetworkNetAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { rcIpBgpNetworkEntry 1 } rcIpBgpNetworkMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { rcIpBgpNetworkEntry 2 } rcIpBgpNetworkWeight OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpNetworkEntry 3 } rcIpBgpNetworkRouteMap OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "route-map name" ::= { rcIpBgpNetworkEntry 4 } -- IP Bdp Peers Table rcIpBgpPeerTableSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "table size" ::= { rcIpBgp 9 } rcIpBgpPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpBgpPeerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IP Bdp Peers table" ::= { rcIpBgp 10 } rcIpBgpPeerEntry OBJECT-TYPE SYNTAX RcIpBgpPeerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of Ip Bdp In Table." INDEX { rcIpBgpPeerIpAddress } ::= { rcIpBgpPeerTable 1 } RcIpBgpPeerEntry ::= SEQUENCE { rcIpBgpPeerIpAddress IpAddress, rcIpBgpPeerRemoteAs INTEGER, rcIpBgpPeerDiscription DisplayString, rcIpBgpPeerPeerGroupName DisplayString, rcIpBgpPeerDefaultOriginate EnableValue, rcIpBgpPeerSendCommunity EnableValue, rcIpBgpPeerUpdateSource IpAddress, rcIpBgpPeerEbgpMultiHop EnableValue, rcIpBgpPeerAdvertisementInterval INTEGER, rcIpBgpPeerPassword DisplayString, rcIpBgpPeerWeight INTEGER, rcIpBgpPeerAction INTEGER, rcIpBgpPeerFilterInListId INTEGER, rcIpBgpPeerFilterOutListId INTEGER, rcIpBgpPeerFilterWeightListId INTEGER, rcIpBgpPeerFilterWeight INTEGER, rcIpBgpPeerDistributeInListId INTEGER, rcIpBgpPeerDistributeOutListId INTEGER, rcIpBgpPeerPrefixInListId INTEGER, rcIpBgpPeerPrefixOutListId INTEGER, rcIpBgpPeerNextHopSelf EnableValue, rcIpBgpPeerRouteMapIn DisplayString, rcIpBgpPeerRouteMapOut DisplayString, rcIpBgpPeerRouteReflectorClient TruthValue, rcIpBgpPeerShutDown TruthValue, rcIpBgpPeerKeepAliveTimer INTEGER, rcIpBgpPeerHoldDownTimer INTEGER } rcIpBgpPeerIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { rcIpBgpPeerEntry 1 } rcIpBgpPeerRemoteAs OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Remote Autonomous system number" ::= { rcIpBgpPeerEntry 2 } rcIpBgpPeerDiscription OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Neighbor discription" ::= { rcIpBgpPeerEntry 3 } rcIpBgpPeerPeerGroupName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Peer group name" ::= { rcIpBgpPeerEntry 4 } rcIpBgpPeerDefaultOriginate OBJECT-TYPE SYNTAX EnableValue ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpPeerEntry 5 } rcIpBgpPeerSendCommunity OBJECT-TYPE SYNTAX EnableValue ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpPeerEntry 6 } rcIpBgpPeerUpdateSource OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Loop back interface." ::= { rcIpBgpPeerEntry 7 } rcIpBgpPeerEbgpMultiHop OBJECT-TYPE SYNTAX EnableValue ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpPeerEntry 8 } rcIpBgpPeerAdvertisementInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "min interval between advert" ::= { rcIpBgpPeerEntry 9 } rcIpBgpPeerPassword OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "simple password/MD5" ::= { rcIpBgpPeerEntry 10 } rcIpBgpPeerWeight OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpPeerEntry 11 } rcIpBgpPeerAction OBJECT-TYPE SYNTAX INTEGER { none(0), reset(1), shutdown(2) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpPeerEntry 12 } rcIpBgpPeerFilterInListId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpPeerEntry 13 } rcIpBgpPeerFilterOutListId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpPeerEntry 14 } rcIpBgpPeerFilterWeightListId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpPeerEntry 15 } rcIpBgpPeerFilterWeight OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Weight to be assigned." ::= { rcIpBgpPeerEntry 16 } rcIpBgpPeerDistributeInListId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpPeerEntry 17 } rcIpBgpPeerDistributeOutListId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpPeerEntry 18 } rcIpBgpPeerPrefixInListId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpPeerEntry 19 } rcIpBgpPeerPrefixOutListId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpPeerEntry 20 } rcIpBgpPeerNextHopSelf OBJECT-TYPE SYNTAX EnableValue ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpPeerEntry 21 } rcIpBgpPeerRouteMapIn OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpPeerEntry 22 } rcIpBgpPeerRouteMapOut OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpPeerEntry 23 } rcIpBgpPeerRouteReflectorClient OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpPeerEntry 24 } rcIpBgpPeerShutDown OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpPeerEntry 25 } rcIpBgpPeerKeepAliveTimer OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "KeepAlive Timer value." ::= { rcIpBgpPeerEntry 26 } rcIpBgpPeerHoldDownTimer OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "HoldDown Timer value." ::= { rcIpBgpPeerEntry 27 } -- IP Bdp Peer Group Table rcIpBgpPeerGroupTableSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "table size" ::= { rcIpBgp 11 } rcIpBgpPeerGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpBgpPeerGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IP Bdp Peer Group table" ::= { rcIpBgp 12 } rcIpBgpPeerGroupEntry OBJECT-TYPE SYNTAX RcIpBgpPeerGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of Ip Bdp Peer Group Table." INDEX { rcIpBgpPeerGroupId, rcIpBgpPeerGroupMemberIpAddr } ::= { rcIpBgpPeerGroupTable 1 } RcIpBgpPeerGroupEntry ::= SEQUENCE { rcIpBgpPeerGroupId INTEGER, rcIpBgpPeerGroupMemberIpAddr IpAddress, rcIpBgpPeerGroupMemberListId INTEGER, rcIpBgpPeerGroupName DisplayString } rcIpBgpPeerGroupId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Peer Group id" ::= { rcIpBgpPeerGroupEntry 1 } rcIpBgpPeerGroupMemberIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "IpAddress of the member" ::= { rcIpBgpPeerGroupEntry 2 } rcIpBgpPeerGroupMemberListId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpPeerGroupEntry 3 } rcIpBgpPeerGroupName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Name of the peer group" ::= { rcIpBgpPeerGroupEntry 4 } -- IP Bdp Debug Table rcIpBgpDebugTableSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "table size" ::= { rcIpBgp 13 } rcIpBgpDebugTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpBgpDebugEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IP Bdp Debug table" ::= { rcIpBgp 14 } rcIpBgpDebugEntry OBJECT-TYPE SYNTAX RcIpBgpDebugEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of Ip Bdp Debug Table." INDEX { rcIpBgpDebugLocalAddr, rcIpBgpDebugRemoteAddr } ::= { rcIpBgpDebugTable 1 } RcIpBgpDebugEntry ::= SEQUENCE { rcIpBgpDebugLocalAddr EnableValue, rcIpBgpDebugRemoteAddr EnableValue, rcIpBgpDebugEvents EnableValue, rcIpBgpDebugKeepAlives EnableValue, rcIpBgpDebugUpdates EnableValue, rcIpBgpDebugUpdatesListId INTEGER, rcIpBgpDebugDampening EnableValue, rcIpBgpDebugDampeningListId INTEGER } rcIpBgpDebugLocalAddr OBJECT-TYPE SYNTAX EnableValue ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpDebugEntry 1 } rcIpBgpDebugRemoteAddr OBJECT-TYPE SYNTAX EnableValue ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpDebugEntry 2 } rcIpBgpDebugEvents OBJECT-TYPE SYNTAX EnableValue ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpDebugEntry 3 } rcIpBgpDebugKeepAlives OBJECT-TYPE SYNTAX EnableValue ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpDebugEntry 4 } rcIpBgpDebugUpdates OBJECT-TYPE SYNTAX EnableValue ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpDebugEntry 5 } rcIpBgpDebugUpdatesListId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpDebugEntry 6 } rcIpBgpDebugDampening OBJECT-TYPE SYNTAX EnableValue ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpDebugEntry 7 } rcIpBgpDebugDampeningListId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcIpBgpDebugEntry 8 } -- ARP Group rcArpExtLifeTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The lifetime in minutues of an ARP entry within the system." ::= { rcArp 1 } rcArpExtTable OBJECT-TYPE SYNTAX SEQUENCE OF RcArpExtEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "ARP extension table. This table augments the standard ipNetToMediaTable defined in RFC1213." ::= { rcArp 2 } rcArpExtEntry OBJECT-TYPE SYNTAX RcArpExtEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing Proprietary ARP information. An entry is automatically created in this table when an ip address is configured on an interface." INDEX { rcArpExtEntIfIndex } ::= { rcArpExtTable 1 } RcArpExtEntry ::= SEQUENCE { rcArpExtEntIfIndex InterfaceIndex, rcArpExtEntDoProxy INTEGER, rcArpExtEntDoResp INTEGER } rcArpExtEntIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { rcArpExtEntry 1 } rcArpExtEntDoProxy OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable ARP proxy responses on the specified interface." DEFVAL { disable } ::= { rcArpExtEntry 2 } rcArpExtEntDoResp OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable the sending of ARP responses on the specified interface." DEFVAL { enable } ::= { rcArpExtEntry 3 } -- rcArpExtV2Table rcArpExtV2Table OBJECT-TYPE SYNTAX SEQUENCE OF RcArpExtV2Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "ARP extension table. This table augments the standard ipNetToMediaTable defined in RFC1213." ::= { rcArp 3 } rcArpExtV2Entry OBJECT-TYPE SYNTAX RcArpExtV2Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing Proprietary ARP information. An entry is automatically created in this table when an ip address is configured on an interface." INDEX { rcArpExtV2EntIfIndex, rcArpExtV2EntIpIfAddr } ::= { rcArpExtV2Table 1 } RcArpExtV2Entry ::= SEQUENCE { rcArpExtV2EntIfIndex InterfaceIndex, rcArpExtV2EntIpIfAddr IpAddress, rcArpExtV2EntDoProxy INTEGER, rcArpExtV2EntDoResp INTEGER } rcArpExtV2EntIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { rcArpExtV2Entry 1 } rcArpExtV2EntIpIfAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Ip Address" ::= { rcArpExtV2Entry 2 } rcArpExtV2EntDoProxy OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable ARP proxy responses on the specified interface." DEFVAL { disable } ::= { rcArpExtV2Entry 3 } rcArpExtV2EntDoResp OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable the sending of ARP responses on the specified interface." DEFVAL { enable } ::= { rcArpExtV2Entry 4 } -- RIP Group rcRipExtOperation OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable the operation of RIP on all Interfaces." ::= { rcRip 1 } rcRipExtUpdateTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The time between transmission of RIP updates on all interfaces." ::= { rcRip 2 } rcRipExtTable OBJECT-TYPE SYNTAX SEQUENCE OF RcRipExtEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "RIP extension table. This table augments the standard IfConfTable table in RFC1389." ::= { rcRip 3 } rcRipExtEntry OBJECT-TYPE SYNTAX RcRipExtEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing Proprietary RIP information. An entry is automatically created in this table when an ip address is configured on an interface." INDEX { rcRipExtEntIfIndex } ::= { rcRipExtTable 1 } RcRipExtEntry ::= SEQUENCE { rcRipExtEntIfIndex InterfaceIndex, rcRipExtEntTalk INTEGER, rcRipExtEntListen INTEGER, rcRipExtEntPoison INTEGER } rcRipExtEntIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { rcRipExtEntry 1 } rcRipExtEntTalk OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable RIP transmission on the specified interface." DEFVAL { enable } ::= { rcRipExtEntry 2 } rcRipExtEntListen OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable RIP reception on the specified interface." DEFVAL { enable } ::= { rcRipExtEntry 3 } rcRipExtEntPoison OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable operation of poison reverse on the specified interface. If poison is disabled, split-horizon operation is enabled." DEFVAL { disable } ::= { rcRipExtEntry 4 } -- rcRipExtV2Table rcRipExtV2Table OBJECT-TYPE SYNTAX SEQUENCE OF RcRipExtV2Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "RIP extension table. This table augments the standard IfConfTable table in RFC1389." ::= { rcRip 4 } rcRipExtV2Entry OBJECT-TYPE SYNTAX RcRipExtV2Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing Proprietary RIP information. An entry is automatically created in this table when an ip address is configured on an interface." INDEX { rcRipExtV2EntIfIndex, rcRipExtV2EntIpIfAddr } ::= { rcRipExtV2Table 1 } RcRipExtV2Entry ::= SEQUENCE { rcRipExtV2EntIfIndex InterfaceIndex, rcRipExtV2EntIpIfAddr IpAddress, rcRipExtV2EntTalk INTEGER, rcRipExtV2EntListen INTEGER, rcRipExtV2EntPoison INTEGER } rcRipExtV2EntIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { rcRipExtV2Entry 1 } rcRipExtV2EntIpIfAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Ip Address." ::= { rcRipExtV2Entry 2 } rcRipExtV2EntTalk OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable RIP transmission on the specified interface." DEFVAL { enable } ::= { rcRipExtV2Entry 3 } rcRipExtV2EntListen OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable RIP reception on the specified interface." DEFVAL { enable } ::= { rcRipExtV2Entry 4 } rcRipExtV2EntPoison OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable operation of poison reverse on the specified interface. If poison is disabled, split-horizon operation is enabled." DEFVAL { disable } ::= { rcRipExtV2Entry 5 } -- Test Group rcTestExtTable OBJECT-TYPE SYNTAX SEQUENCE OF RcTestEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Test extension table. This table augments the standard ifTestTable table in RFC1573." ::= { rcTest 1 } rcTestEntry OBJECT-TYPE SYNTAX RcTestEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Proprietary test variables." INDEX { rcTestExtIfIndex } ::= { rcTestExtTable 1 } RcTestEntry ::= SEQUENCE { rcTestExtIfIndex InterfaceIndex, rcTestExtPassCount INTEGER, rcTestExtFailCount INTEGER } rcTestExtIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { rcTestEntry 1 } rcTestExtPassCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of iterations of the test case that completed successfully." ::= { rcTestEntry 2} rcTestExtFailCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of iterations of the test case that failed." ::= { rcTestEntry 3} rcTestTypes OBJECT IDENTIFIER ::= { rcTest 2} rcTestTypesFabric OBJECT IDENTIFIER ::= { rcTestTypes 1 } rcTestTypesArTable OBJECT IDENTIFIER ::= { rcTestTypes 2 } rcTestTypesExtLoopBack OBJECT IDENTIFIER ::= { rcTestTypes 3 } rcTestCodes OBJECT IDENTIFIER ::= { rcTest 3 } rcTestCodesNoReceive OBJECT IDENTIFIER ::= { rcTestCodes 1 } rcTestCodesBadSeq OBJECT IDENTIFIER ::= { rcTestCodes 2 } rcTestCodesBadLen OBJECT IDENTIFIER ::= { rcTestCodes 3 } rcTestCodesBadData OBJECT IDENTIFIER ::= { rcTestCodes 4 } -- Statistics rcStatTable OBJECT-TYPE SYNTAX SEQUENCE OF RcStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table used to store port statistics." ::= { rcStat 1 } rcStatEntry OBJECT-TYPE SYNTAX RcStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "interface counters" INDEX { rcStatPortIndex } ::= { rcStatTable 1 } RcStatEntry ::= SEQUENCE { rcStatPortIndex InterfaceIndex, rcStatFrameTooShorts Counter, rcStatBridgeInUnicastFrames Counter, rcStatBridgeInMulticastFrames Counter, rcStatBridgeInBroadcastFrames Counter, rcStatBridgeInDiscards Counter, rcStatBridgeOutUnicastFrames Counter, rcStatBridgeOutMulticastFrames Counter, rcStatBridgeOutBroadcastFrames Counter, rcStatRouteInUnicastFrames Counter, rcStatRouteInMulticastFrames Counter, rcStatRouteInDiscards Counter, rcStatRouteOutUnicastFrames Counter, rcStatRouteOutMulticastFrames Counter, rcStatStgForwardTransitions Counter, rcStatStgInConfigBpdus Counter, rcStatStgInTcnBpdus Counter, rcStatStgInBadBpdus Counter, rcStatStgOutConfigBpdus Counter, rcStatStgOutTcnBpdus Counter, rcStatBridgeOutFrames Counter } rcStatPortIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2." ::= { rcStatEntry 1 } rcStatFrameTooShorts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of frames that are too short that were encountered on this interface." ::= { rcStatEntry 2 } rcStatBridgeInUnicastFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of incoming unicast frames that were bridged." ::= { rcStatEntry 3 } rcStatBridgeInMulticastFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of incoming multicast frames that were bridged." ::= { rcStatEntry 4 } rcStatBridgeInBroadcastFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of incoming broadcast frames that were bridged." ::= { rcStatEntry 5 } rcStatBridgeInDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of frames that were discarded by the bridging entity." ::= { rcStatEntry 6 } rcStatBridgeOutUnicastFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of outgoing unicast frames that were bridged." ::= { rcStatEntry 7 } rcStatBridgeOutMulticastFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of outgoing multicast frames that were bridged." ::= { rcStatEntry 8 } rcStatBridgeOutBroadcastFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of outgoing broadcast frames that were bridged." ::= { rcStatEntry 9 } rcStatRouteInUnicastFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of incoming unicast frames that were routed." ::= { rcStatEntry 10 } rcStatRouteInMulticastFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of incoming multicast frames that were routed." ::= { rcStatEntry 11 } rcStatRouteInDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of frames that were discarded by the routing entity." ::= { rcStatEntry 12 } rcStatRouteOutUnicastFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of outgoing unicast frames that were routed." ::= { rcStatEntry 13 } rcStatRouteOutMulticastFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of outgoing multicast frames that were routed." ::= { rcStatEntry 14 } rcStatStgForwardTransitions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times this port has transitioned from the Learning state to the Forwarding state." ::= { rcStatEntry 15 } rcStatStgInConfigBpdus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { rcStatEntry 16 } rcStatStgInTcnBpdus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { rcStatEntry 17 } rcStatStgInBadBpdus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { rcStatEntry 18 } rcStatStgOutConfigBpdus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { rcStatEntry 19 } rcStatStgOutTcnBpdus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { rcStatEntry 20 } rcStatBridgeOutFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used by the Accelar 8000 product family to account for all transmitted bridge unicast, broadcast, and multicast packets. The individual counters are not supported." ::= { rcStatEntry 21 } -- rcStatGigTable rcStatGigTable OBJECT-TYPE SYNTAX SEQUENCE OF RcStatGigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table used to store Gigport error statistics." ::= { rcStat 2 } rcStatGigEntry OBJECT-TYPE SYNTAX RcStatGigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Gigabit interface error counters" INDEX { rcStatGigPortIndex } ::= { rcStatGigTable 1 } RcStatGigEntry ::= SEQUENCE { rcStatGigPortIndex InterfaceIndex, rcStatGigLinkFailures Counter, rcStatGigPacketErrors Counter, rcStatGigCarrierErrors Counter, rcStatGigLinkInactiveErrors Counter, rcStatGigInFlowCtrlPkts Counter, rcStatGigOutFlowCtrlPkts Counter } rcStatGigPortIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2." ::= { rcStatGigEntry 1 } rcStatGigLinkFailures OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of link failures encountered on this interface." ::= { rcStatGigEntry 2 } rcStatGigPacketErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packet errors encountered on this interface." ::= { rcStatGigEntry 3 } rcStatGigCarrierErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of carrier errors encountered on this interface." ::= { rcStatGigEntry 4 } rcStatGigLinkInactiveErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of link inactive errors encountered on this interface." ::= { rcStatGigEntry 5 } rcStatGigInFlowCtrlPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of flow control packets received by this interface." ::= { rcStatGigEntry 6 } rcStatGigOutFlowCtrlPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of flow control packets transmitted by this interface." ::= { rcStatGigEntry 7 } rcStatOspf OBJECT IDENTIFIER ::= { rcStat 3} rcStatOspfBuffersAllocated OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of buffers allocated for OSPF." ::= { rcStatOspf 1 } rcStatOspfBuffersFreed OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of buffers that are freed by the OSPF." ::= { rcStatOspf 2 } rcStatOspfBufferAllocFailures OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of times that OSPF has failed to allocate buffers." ::= { rcStatOspf 3 } rcStatOspfBufferFreeFailures OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of times that OSPF has failed to free buffers." ::= { rcStatOspf 4 } rcStatOspfTxPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of packets transmitted by OSPF." ::= { rcStatOspf 5 } rcStatOspfRxPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of packets received by OSPF." ::= { rcStatOspf 6 } rcStatOspfTxDropPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of packets dropped before transmitted by OSPF." ::= { rcStatOspf 7 } rcStatOspfRxDropPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of packets dropped before received by OSPF." ::= { rcStatOspf 8 } rcStatOspfRxBadPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of packets received by OSPF that are bad." ::= { rcStatOspf 9 } rcStatOspfSpfRuns OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of SPF calculatations performed by OSPF." ::= { rcStatOspf 10 } rcStatOspfLastSpfRun OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the time(SysUpTime) since the last spf calculated by OSPF." ::= { rcStatOspf 11 } rcStatIgmp OBJECT IDENTIFIER ::= { rcStat 4} rcStatIgmpInMsgs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of Igmp packets received by the device." ::= { rcStatIgmp 1 } rcStatIgmpInErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of Igmp packets received that are with checksum errors." ::= { rcStatIgmp 2 } rcStatIgmpInQueries OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of Igmp queries received by the device." ::= { rcStatIgmp 3 } rcStatIgmpInReports OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of Igmp reports received by the device." ::= { rcStatIgmp 4 } rcStatIgmpInLeaves OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of Igmp Leaves received by the device." ::= { rcStatIgmp 5 } rcStatIgmpInvalid OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of Igmp packets received by the device that contained invalid type." ::= { rcStatIgmp 6 } rcStatIgmpOutMsgs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of Igmp queries sent by the device." ::= { rcStatIgmp 7 } rcStatOspfLsdbTblSize OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of entries in the linkstate database table." ::= { rcStatOspf 12 } rcStatOspfIfTable OBJECT-TYPE SYNTAX SEQUENCE OF RcStatOspfIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table used to store OSPF interface statistics." ::= { rcStat 5 } rcStatOspfIfEntry OBJECT-TYPE SYNTAX RcStatOspfIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Ospf interface statistics" INDEX { rcStatOspfIfIndex } ::= { rcStatOspfIfTable 1 } RcStatOspfIfEntry ::= SEQUENCE { rcStatOspfIfIndex InterfaceIndex, rcStatOspfIfRxHellos Counter, rcStatOspfIfRxDBDescrs Counter, rcStatOspfIfRxLSUpdates Counter, rcStatOspfIfRxLSReqs Counter, rcStatOspfIfRxLSAcks Counter, rcStatOspfIfTxHellos Counter, rcStatOspfIfTxDBDescrs Counter, rcStatOspfIfTxLSUpdates Counter, rcStatOspfIfTxLSReqs Counter, rcStatOspfIfTxLSAcks Counter, rcStatOspfIfVersionMismatches Counter, rcStatOspfIfAreaMismatches Counter, rcStatOspfIfAuthTypeMismatches Counter, rcStatOspfIfAuthFailures Counter, rcStatOspfIfNetMaskMismatches Counter, rcStatOspfIfHelloIntervalMismatches Counter, rcStatOspfIfDeadIntervalMismatches Counter, rcStatOspfIfOptionMismatches Counter } rcStatOspfIfIndex OBJECT-TYPE SYNTAX InterfaceIndex (0..4094) ACCESS read-only STATUS mandatory DESCRIPTION "An unique value that is used to identify a physical interface." ::= { rcStatOspfIfEntry 1 } rcStatOspfIfRxHellos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number hello packets received by this interface." ::= { rcStatOspfIfEntry 2 } rcStatOspfIfRxDBDescrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number database descriptor packets received by this interface." ::= { rcStatOspfIfEntry 3 } rcStatOspfIfRxLSUpdates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number Link state update packets received by this interface." ::= { rcStatOspfIfEntry 4 } rcStatOspfIfRxLSReqs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number Link state request packets received by this interface." ::= { rcStatOspfIfEntry 5 } rcStatOspfIfRxLSAcks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number Link state acknowlege packets received by this interface." ::= { rcStatOspfIfEntry 6 } rcStatOspfIfTxHellos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number hello packets transmitted by this interface." ::= { rcStatOspfIfEntry 7 } rcStatOspfIfTxDBDescrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number database descriptor packets transmitted by this interface." ::= { rcStatOspfIfEntry 8 } rcStatOspfIfTxLSUpdates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number Link state update packets transmitted by this interface." ::= { rcStatOspfIfEntry 9 } rcStatOspfIfTxLSReqs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number Link state request packets transmitted by this interface." ::= { rcStatOspfIfEntry 10 } rcStatOspfIfTxLSAcks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number Link state acknowlege packets transmitted by this interface." ::= { rcStatOspfIfEntry 11 } rcStatOspfIfVersionMismatches OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number version mismatches received by this interface." ::= { rcStatOspfIfEntry 12 } rcStatOspfIfAreaMismatches OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number area mismatches received by this interface." ::= { rcStatOspfIfEntry 13 } rcStatOspfIfAuthTypeMismatches OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number AuthType mismatches received by this interface." ::= { rcStatOspfIfEntry 14 } rcStatOspfIfAuthFailures OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number Authentication failures." ::= { rcStatOspfIfEntry 15 } rcStatOspfIfNetMaskMismatches OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number net mask mismatches received by this interface." ::= { rcStatOspfIfEntry 16 } rcStatOspfIfHelloIntervalMismatches OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number hello interval mismatches received by this interface." ::= { rcStatOspfIfEntry 17 } rcStatOspfIfDeadIntervalMismatches OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number dead interval mismatches received by this interface." ::= { rcStatOspfIfEntry 18 } rcStatOspfIfOptionMismatches OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number options mismatches received by this interface." ::= { rcStatOspfIfEntry 19 } -- rcStatMlt Group rcStatMlt OBJECT IDENTIFIER ::= { rcStat 6 } rcStatMltIfExtnTable OBJECT-TYPE SYNTAX SEQUENCE OF RcStatMltIfExtnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table used to store Mlt interface statistics." ::= { rcStatMlt 1 } rcStatMltIfExtnEntry OBJECT-TYPE SYNTAX RcStatMltIfExtnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Mlt interface statistics" INDEX { rcStatMltIfExtnMltId } ::= { rcStatMltIfExtnTable 1 } RcStatMltIfExtnEntry ::= SEQUENCE { rcStatMltIfExtnMltId INTEGER, rcStatMltIfExtnIfInMulticastPkts Counter32, rcStatMltIfExtnIfInBroadcastPkts Counter32, rcStatMltIfExtnIfOutMulticastPkts Counter32, rcStatMltIfExtnIfOutBroadcastPkts Counter32, rcStatMltIfExtnIfHCInOctets Counter64, rcStatMltIfExtnIfHCInUcastPkts Counter64, rcStatMltIfExtnIfHCInMulticastPkt Counter64, rcStatMltIfExtnIfHCInBroadcastPkt Counter64, rcStatMltIfExtnIfHCOutOctets Counter64, rcStatMltIfExtnIfHCOutUcastPkts Counter64, rcStatMltIfExtnIfHCOutMulticast Counter64, rcStatMltIfExtnIfHCOutBroadcast Counter64 } rcStatMltIfExtnMltId OBJECT-TYPE SYNTAX INTEGER (1..32) ACCESS read-only STATUS mandatory DESCRIPTION "Mlt Id" ::= { rcStatMltIfExtnEntry 1 } rcStatMltIfExtnIfInMulticastPkts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "multi-pkts to upper" ::= { rcStatMltIfExtnEntry 2 } rcStatMltIfExtnIfInBroadcastPkts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "broad-pkts to upper" ::= { rcStatMltIfExtnEntry 3 } rcStatMltIfExtnIfOutMulticastPkts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "multi-pkts from upper" ::= { rcStatMltIfExtnEntry 4 } rcStatMltIfExtnIfOutBroadcastPkts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "broad-pkts from upper" ::= { rcStatMltIfExtnEntry 5 } rcStatMltIfExtnIfHCInOctets OBJECT-TYPE SYNTAX Counter64 ACCESS read-only STATUS mandatory DESCRIPTION "The total number of octets received on the MLT interface, including framing characters." ::= { rcStatMltIfExtnEntry 6 } rcStatMltIfExtnIfHCInUcastPkts OBJECT-TYPE SYNTAX Counter64 ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets delivered by this MLT to a higher MLT that were not addressed to a nulticast or broadcase address at this sublayer." ::= { rcStatMltIfExtnEntry 7 } rcStatMltIfExtnIfHCInMulticastPkt OBJECT-TYPE SYNTAX Counter64 ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets delivered to this MLT that were addressed to a nulticast address at this sublayer. For a MAC layer protocol, this number includes both Group and Functional addresses." ::= { rcStatMltIfExtnEntry 8 } rcStatMltIfExtnIfHCInBroadcastPkt OBJECT-TYPE SYNTAX Counter64 ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets delivered to this MLT that were addressed to a broadcast address at this sublayer." ::= { rcStatMltIfExtnEntry 9 } rcStatMltIfExtnIfHCOutOctets OBJECT-TYPE SYNTAX Counter64 ACCESS read-only STATUS mandatory DESCRIPTION "The total number of octets transmitted out of the MLT interface, including framing characters." ::= { rcStatMltIfExtnEntry 10 } rcStatMltIfExtnIfHCOutUcastPkts OBJECT-TYPE SYNTAX Counter64 ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets that hight-level protocols requested be transmitted that were not addressed to a multicast address at this MLT. This total number includes those packets discarded or unsent." ::= { rcStatMltIfExtnEntry 11 } rcStatMltIfExtnIfHCOutMulticast OBJECT-TYPE SYNTAX Counter64 ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets that hight-level protocols requested be transmitted, and that were addressed to a multicast address at this MLT, including those that were discarded or not sent. For a MAC layer protocol, this number includes both Group and Functional addresses." ::= { rcStatMltIfExtnEntry 12 } rcStatMltIfExtnIfHCOutBroadcast OBJECT-TYPE SYNTAX Counter64 ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets that hight-level protocols requested be transmitted, and that were addressed to a broadcase address at this MLT, including those that were discarded or not sent." ::= { rcStatMltIfExtnEntry 13 } -- Mlt Ether table rcStatMltEtherTable OBJECT-TYPE SYNTAX SEQUENCE OF RcStatMltEtherEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table used to store Mlt Ethernet statistics." ::= { rcStatMlt 2 } rcStatMltEtherEntry OBJECT-TYPE SYNTAX RcStatMltEtherEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Mlt enternet statistics" INDEX { rcStatMltEtherMltId } ::= { rcStatMltEtherTable 1 } RcStatMltEtherEntry ::= SEQUENCE { rcStatMltEtherMltId INTEGER, rcStatMltEtherAlignmentErrors Counter, rcStatMltEtherFCSErrors Counter, rcStatMltEtherSingleCollFrames Counter, rcStatMltEtherMultipleCollFrames Counter, rcStatMltEtherSQETestError Counter, rcStatMltEtherDeferredTransmiss Counter, rcStatMltEtherLateCollisions Counter, rcStatMltEtherExcessiveCollis Counter, rcStatMltEtherIMacTransmitError Counter, rcStatMltEtherCarrierSenseError Counter, rcStatMltEtherFrameTooLong Counter, rcStatMltEtherIMacReceiveError Counter } rcStatMltEtherMltId OBJECT-TYPE SYNTAX INTEGER (1..32) ACCESS read-only STATUS mandatory DESCRIPTION "A value that uniquely identifies the Multi-Link Trunk associated with this entry." ::= { rcStatMltEtherEntry 1 } rcStatMltEtherAlignmentErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of frames received on a particular MLT that are not an integral number of octets in length and do not pass the FCS check. The count represented by an instance of this object is incremented when the alignmentError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions occur are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC." ::= { rcStatMltEtherEntry 2 } rcStatMltEtherFCSErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of frames received on an MLT that are an integral number of octets in length but do not pass the FCS check. The count represented by an instance of this object is incremented when the frameCheckError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions occur are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC." ::= { rcStatMltEtherEntry 3 } rcStatMltEtherSingleCollFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of successfully transmitted frames on a particular MLT for which transmission is inhibited by exactly one collision. A frame that is counted by an instance of this objects is also counted by the corresponding instance of either the ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and it not counted by the corresponding instance of the MultipleCollisionFrames object." ::= { rcStatMltEtherEntry 4 } rcStatMltEtherMultipleCollFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of successfully transmitted frames on a particular MLT for which transmission is inhibited by more than one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the corresponding instance of the SingleCollisionFrames objects." ::= { rcStatMltEtherEntry 5 } rcStatMltEtherSQETestError OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular MLT. SQE stands for Signal Quality Error." ::= { rcStatMltEtherEntry 6 } rcStatMltEtherDeferredTransmiss OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of frames for which the first transmission attempt on a particular MLT is delayed because the medium is busy. The count represented by an instance of this object does not include frames involved in collisions." ::= { rcStatMltEtherEntry 7 } rcStatMltEtherLateCollisions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times that a collision is detected on a particular MLT later than 512 bit-times (64 octets) into the transmission of a packet. Five hundred and twelve bit-times corresponds to 51.2 microseconds on a 10 mb/s system. A (late) collision included in a count represented by an instance of this object is also considered as a (generic) collision for purposes of other collision-related statistics." ::= { rcStatMltEtherEntry 8 } rcStatMltEtherExcessiveCollis OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of frames for which transmission on a particular MLT fails due to excessive collisions." ::= { rcStatMltEtherEntry 9 } rcStatMltEtherIMacTransmitError OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of frames for which transmission on a particular MLT fails due to an internal MAC sublayer transmit error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the LateCollisions object, the ExcessiveCollisions object, or the CarrierSenseError object." ::= { rcStatMltEtherEntry 10 } rcStatMltEtherCarrierSenseError OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular MLT. The count represented by an instance of this object is incremented at most once per transmission attempt, even if the carrier sense condition fluctuates during a transmission attempt." ::= { rcStatMltEtherEntry 11 } rcStatMltEtherFrameTooLong OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of frames received on a particular MLT that exceed the maximum permitted size (1518 octets). The count represented by an instance os this object is incremented when the frame TooLong status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions occur are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC." ::= { rcStatMltEtherEntry 12 } rcStatMltEtherIMacReceiveError OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of frames for which reception on a particular MLT fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the FrameTooLongs object, the AlignmentErrors object, of the FCSErrors objects. The precise meaning of the count represented by an instance of this object is implementation specific. In particular, an instance of this object may represent a count of receive errors on a particular interface that are not otherwise counted." ::= { rcStatMltEtherEntry 13 } -- Mlt Ip table rcStatMltIpTable OBJECT-TYPE SYNTAX SEQUENCE OF RcStatMltIpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table used to store Mlt Ip statistics." ::= { rcStatMlt 3 } rcStatMltIpEntry OBJECT-TYPE SYNTAX RcStatMltIpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Mlt enternet statistics" INDEX { rcStatMltIpMltId } ::= { rcStatMltIpTable 1 } RcStatMltIpEntry ::= SEQUENCE { rcStatMltIpMltId INTEGER, rcStatMltIpInReceives Counter, rcStatMltIpInHdrErrors Counter, rcStatMltIpInAddrErrors Counter, rcStatMltIpForwDatagrams Counter, rcStatMltIpInUnknownProtos Counter, rcStatMltIpInDiscards Counter, rcStatMltIpInDelivers Counter, rcStatMltIpOutRequest Counter, rcStatMltIpOutDiscards Counter, rcStatMltIpOutNoRoutes Counter, rcStatMltIpReasmReqds Counter, rcStatMltIpReasmOKs Counter, rcStatMltIpReasmFails Counter, rcStatMltIpFragOKs Counter, rcStatMltIpFragFails Counter, rcStatMltIpFragCreates Counter, rcStatMltIpRoutingDiscards Counter } rcStatMltIpMltId OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS read-only STATUS mandatory DESCRIPTION "Mlt Id" ::= { rcStatMltIpEntry 1 } rcStatMltIpInReceives OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "all incoming packets" ::= { rcStatMltIpEntry 2 } rcStatMltIpInHdrErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "hdr errors detected" ::= { rcStatMltIpEntry 3 } rcStatMltIpInAddrErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "bad dest. ip addr" ::= { rcStatMltIpEntry 4 } rcStatMltIpForwDatagrams OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "packets forwarded" ::= { rcStatMltIpEntry 5 } rcStatMltIpInUnknownProtos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "unsupported protocol" ::= { rcStatMltIpEntry 6 } rcStatMltIpInDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "good, but no buffer" ::= { rcStatMltIpEntry 7 } rcStatMltIpInDelivers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "pkts delivered to upper" ::= { rcStatMltIpEntry 8 } rcStatMltIpOutRequest OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "pkts received from upper" ::= { rcStatMltIpEntry 9 } rcStatMltIpOutDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "good, but no buffer" ::= { rcStatMltIpEntry 10 } rcStatMltIpOutNoRoutes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "no route to destination" ::= { rcStatMltIpEntry 11 } rcStatMltIpReasmReqds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "fragments to reassem" ::= { rcStatMltIpEntry 12 } rcStatMltIpReasmOKs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "reassembled successfully" ::= { rcStatMltIpEntry 13 } rcStatMltIpReasmFails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "reassembly failures" ::= { rcStatMltIpEntry 14 } rcStatMltIpFragOKs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "fragment successfully" ::= { rcStatMltIpEntry 15 } rcStatMltIpFragFails OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "fragment failure" ::= { rcStatMltIpEntry 16 } rcStatMltIpFragCreates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "pkts due to fragmenting" ::= { rcStatMltIpEntry 17 } rcStatMltIpRoutingDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Route entries removed" ::= { rcStatMltIpEntry 18 } -- Stat Ospf Ip Interface Table -- replaces Stat Ospf Interface Table rcStatOspfIfV2Table OBJECT-TYPE SYNTAX SEQUENCE OF RcStatOspfIfV2Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table used to store OSPF interface statistics." ::= { rcStat 7 } rcStatOspfIfV2Entry OBJECT-TYPE SYNTAX RcStatOspfIfV2Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "Ospf interface statistics" INDEX { rcStatOspfIfV2Index, rcStatOspfIfV2Addr } ::= { rcStatOspfIfV2Table 1 } RcStatOspfIfV2Entry ::= SEQUENCE { rcStatOspfIfV2Index InterfaceIndex, rcStatOspfIfV2Addr IpAddress, rcStatOspfIfV2RxHellos Counter, rcStatOspfIfV2RxDBDescrs Counter, rcStatOspfIfV2RxLSUpdates Counter, rcStatOspfIfV2RxLSReqs Counter, rcStatOspfIfV2RxLSAcks Counter, rcStatOspfIfV2TxHellos Counter, rcStatOspfIfV2TxDBDescrs Counter, rcStatOspfIfV2TxLSUpdates Counter, rcStatOspfIfV2TxLSReqs Counter, rcStatOspfIfV2TxLSAcks Counter, rcStatOspfIfV2VersionMismatches Counter, rcStatOspfIfV2AreaMismatches Counter, rcStatOspfIfV2AuthTypeMismatches Counter, rcStatOspfIfV2AuthFailures Counter, rcStatOspfIfV2NetMaskMismatches Counter, rcStatOspfIfV2HelloIntervalMismatches Counter, rcStatOspfIfV2DeadIntervalMismatches Counter, rcStatOspfIfV2OptionMismatches Counter } rcStatOspfIfV2Index OBJECT-TYPE SYNTAX InterfaceIndex (0..4094) ACCESS read-only STATUS mandatory DESCRIPTION "An unique value that is used to identify a physical interface." ::= { rcStatOspfIfV2Entry 1 } rcStatOspfIfV2Addr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Ip Address" ::= { rcStatOspfIfV2Entry 2 } rcStatOspfIfV2RxHellos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number hello packets received by this interface." ::= { rcStatOspfIfV2Entry 3 } rcStatOspfIfV2RxDBDescrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number database descriptor packets received by this interface." ::= { rcStatOspfIfV2Entry 4 } rcStatOspfIfV2RxLSUpdates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number Link state update packets received by this interface." ::= { rcStatOspfIfV2Entry 5 } rcStatOspfIfV2RxLSReqs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number Link state request packets received by this interface." ::= { rcStatOspfIfV2Entry 6 } rcStatOspfIfV2RxLSAcks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number Link state acknowlege packets received by this interface." ::= { rcStatOspfIfV2Entry 7 } rcStatOspfIfV2TxHellos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number hello packets transmitted by this interface." ::= { rcStatOspfIfV2Entry 8 } rcStatOspfIfV2TxDBDescrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number database descriptor packets transmitted by this interface." ::= { rcStatOspfIfV2Entry 9 } rcStatOspfIfV2TxLSUpdates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number Link state update packets transmitted by this interface." ::= { rcStatOspfIfV2Entry 10 } rcStatOspfIfV2TxLSReqs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number Link state request packets transmitted by this interface." ::= { rcStatOspfIfV2Entry 11 } rcStatOspfIfV2TxLSAcks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number Link state acknowlege packets transmitted by this interface." ::= { rcStatOspfIfV2Entry 12 } rcStatOspfIfV2VersionMismatches OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number version mismatches received by this interface." ::= { rcStatOspfIfV2Entry 13 } rcStatOspfIfV2AreaMismatches OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number area mismatches received by this interface." ::= { rcStatOspfIfV2Entry 14 } rcStatOspfIfV2AuthTypeMismatches OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number AuthType mismatches received by this interface." ::= { rcStatOspfIfV2Entry 15 } rcStatOspfIfV2AuthFailures OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number Authentication failures." ::= { rcStatOspfIfV2Entry 16 } rcStatOspfIfV2NetMaskMismatches OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number net mask mismatches received by this interface." ::= { rcStatOspfIfV2Entry 17 } rcStatOspfIfV2HelloIntervalMismatches OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number hello interval mismatches received by this interface." ::= { rcStatOspfIfV2Entry 18 } rcStatOspfIfV2DeadIntervalMismatches OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number dead interval mismatches received by this interface." ::= { rcStatOspfIfV2Entry 19 } rcStatOspfIfV2OptionMismatches OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number options mismatches received by this interface." ::= { rcStatOspfIfV2Entry 20 } -- rcStatPos Group rcStatPos OBJECT IDENTIFIER ::= { rcStat 8 } -- the Statistics Pos Control table rcStatPosControlTable OBJECT-TYPE SYNTAX SEQUENCE OF RcStatPosControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { rcStatPos 1 } rcStatPosControlEntry OBJECT-TYPE SYNTAX RcStatPosControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { rcStatPosControlPortIndex } ::= { rcStatPosControlTable 1 } RcStatPosControlEntry ::= SEQUENCE { rcStatPosControlPortIndex InterfaceIndex, rcStatPosControlInErrors Counter, rcStatPosControlInUnknownProtos Counter, rcStatPosControlOutErrors Counter, rcStatPosControlHCInOctets Counter64, rcStatPosControlHCInUcastPkts Counter64, rcStatPosControlHCInMulticastPkts Counter64, rcStatPosControlHCInBroadcastPkts Counter64, rcStatPosControlHCInDiscards Counter64, rcStatPosControlHCOutOctets Counter64, rcStatPosControlHCOutUcastPkts Counter64, rcStatPosControlHCOutMulticastPkts Counter64, rcStatPosControlHCOutBroadcastPkts Counter64, rcStatPosControlHCOutDiscards Counter64 } rcStatPosControlPortIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each port." ::= { rcStatPosControlEntry 1 } rcStatPosControlInErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of error pkts received on the interface." ::= { rcStatPosControlEntry 2 } rcStatPosControlInUnknownProtos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets received via the interface which were discarded because of an unknown or unsupported protocol." ::= { rcStatPosControlEntry 3 } rcStatPosControlOutErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of outbound packets that could not be transmitted because of errors." ::= { rcStatPosControlEntry 4 } rcStatPosControlHCInOctets OBJECT-TYPE SYNTAX Counter64 ACCESS read-only STATUS mandatory DESCRIPTION "The total number of octets received of the interface, including framing characters." ::= { rcStatPosControlEntry 5 } rcStatPosControlHCInUcastPkts OBJECT-TYPE SYNTAX Counter64 ACCESS read-only STATUS mandatory DESCRIPTION "The number of subnetwork-unicast packets received from a higher-layer protocol." ::= { rcStatPosControlEntry 6 } rcStatPosControlHCInMulticastPkts OBJECT-TYPE SYNTAX Counter64 ACCESS read-only STATUS mandatory DESCRIPTION "The number of multicast packets received from a higher-layer protocol." ::= { rcStatPosControlEntry 7 } rcStatPosControlHCInBroadcastPkts OBJECT-TYPE SYNTAX Counter64 ACCESS read-only STATUS mandatory DESCRIPTION "The number of broadcast packets received from a higher-layer protocol." ::= { rcStatPosControlEntry 8 } rcStatPosControlHCInDiscards OBJECT-TYPE SYNTAX Counter64 ACCESS read-only STATUS mandatory DESCRIPTION "The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol." ::= { rcStatPosControlEntry 9 } rcStatPosControlHCOutOctets OBJECT-TYPE SYNTAX Counter64 ACCESS read-only STATUS mandatory DESCRIPTION "The total number of octets trasmitted out of the interface, including framing characters." ::= { rcStatPosControlEntry 10 } rcStatPosControlHCOutUcastPkts OBJECT-TYPE SYNTAX Counter64 ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent." ::= { rcStatPosControlEntry 11 } rcStatPosControlHCOutMulticastPkts OBJECT-TYPE SYNTAX Counter64 ACCESS read-only STATUS mandatory DESCRIPTION "The number of multicast packets delivered to a higher-layer protocol." ::= { rcStatPosControlEntry 12 } rcStatPosControlHCOutBroadcastPkts OBJECT-TYPE SYNTAX Counter64 ACCESS read-only STATUS mandatory DESCRIPTION "The number of broadcast packets delivered to a higher-layer protocol." ::= { rcStatPosControlEntry 13 } rcStatPosControlHCOutDiscards OBJECT-TYPE SYNTAX Counter64 ACCESS read-only STATUS mandatory DESCRIPTION "The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted." ::= { rcStatPosControlEntry 14 } -- Common resource threshold exceeded counter for all multicast protocols -- active on the chassis rcStatMulticast OBJECT IDENTIFIER ::= { rcStat 9 } rcStatMulticastSourceGroupThresholdExceeded OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of number of times the threshold of available IP Multicast (Source,Group) Records was reached. When this threshold is reached, a new IP Multicast stream ingressing the switch cannot be forwarded." ::= { rcStatMulticast 1 } rcStatMulticastEgressStreamThresholdExceeded OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of number of times the threshold of available IP Multicast Egress Forwarding Records was reached. When this threshold is reached, a new IP Multicast Receiver that needs new Egress Forwarding Record (PepStrem Record) will not be programmed to receive the subscribing multicast stream." ::= { rcStatMulticast 2 } -- Spanning Tree Group (STG) rcStgMaxStgs OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of spanning tree groups this device can support concurrently." ::= { rcStg 1 } rcStgNumStgs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of spanning tree groups that are currently defined." ::= { rcStg 2 } rcStgUnassignedPorts OBJECT-TYPE SYNTAX PortSet ACCESS read-only STATUS mandatory DESCRIPTION "A bitfield used to identify which ports in the system currently not assigned to any STG. The bitfield is 32 octets long representing ports 0 to 255 (inclusive)." ::= { rcStg 3 } -- STG Table rcStgTable OBJECT-TYPE SYNTAX SEQUENCE OF RcStgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table used to store Spanning Tree Group (STG) information. Each row in the table specifies a different STG in the device." ::= { rcStg 4 } rcStgEntry OBJECT-TYPE SYNTAX RcStgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "STG attributes" INDEX { rcStgId } ::= { rcStgTable 1 } RcStgEntry ::= SEQUENCE { rcStgId INTEGER, rcStgTaggedBpduAddress MacAddress, rcStgTaggedBpduVlanId INTEGER, rcStgBridgeAddress MacAddress, rcStgNumPorts INTEGER, rcStgProtocolSpecification INTEGER, rcStgPriority INTEGER, rcStgTimeSinceTopologyChange TimeTicks, rcStgTopChanges Counter, rcStgDesignatedRoot BridgeId, rcStgRootCost INTEGER, rcStgRootPort INTEGER, rcStgMaxAge Timeout, rcStgHelloTime Timeout, rcStgHoldTime INTEGER, rcStgForwardDelay Timeout, rcStgBridgeMaxAge Timeout, rcStgBridgeHelloTime Timeout, rcStgBridgeForwardDelay Timeout, rcStgEnableStp TruthValue, rcStgStpTrapEnable TruthValue, rcStgPortMembers OCTET STRING, rcStgRowStatus RowStatus, rcStgPortStpState OCTET STRING } rcStgId OBJECT-TYPE SYNTAX INTEGER (1..25) ACCESS read-only STATUS mandatory DESCRIPTION "An identifier used to identify a STG in the device." ::= { rcStgEntry 1 } rcStgTaggedBpduAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-write STATUS mandatory DESCRIPTION "The MAC address to be assigned to the destination mac address field in tagged BPDUs. The default address is the well known multicast group address 01-80-c2-00-00-00." DEFVAL { "01:80:c2:00:00:00" } ::= { rcStgEntry 2 } rcStgTaggedBpduVlanId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The VLAN ID to be used for tagging BPDUs." ::= { rcStgEntry 3 } rcStgBridgeAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However it is only required to be unique. When concatenated with rcStgPriority a unique BridgeIdentifier is formed which is used in the Spanning Tree Protocol." REFERENCE "IEEE 802.1D-1990: Sections 6.4.1.1.3 and 3.12.5" ::= { rcStgEntry 4 } rcStgNumPorts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of ports controlled by this bridging entity." REFERENCE "IEEE 802.1D-1990: Section 6.4.1.1.3" ::= { rcStgEntry 5 } rcStgProtocolSpecification OBJECT-TYPE SYNTAX INTEGER { unknown(1), decLb100(2), ieee8021d(3) } ACCESS read-only STATUS mandatory DESCRIPTION "An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementations will return 'ieee8021d(3)'. If future versions of the IEEE Spanning Tree Protocol are released that are incompatible with the current version a new value will be defined." ::= { rcStgEntry 6 } rcStgPriority OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of rcStgBridgeAddress." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.7" DEFVAL { 32768 } ::= { rcStgEntry 7 } rcStgTimeSinceTopologyChange OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity." REFERENCE "IEEE 802.1D-1990: Section 6.8.1.1.3" ::= { rcStgEntry 8 } rcStgTopChanges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of topology changes detected by this bridge since the management entity was last reset or initialized." REFERENCE "IEEE 802.1D-1990: Section 6.8.1.1.3" ::= { rcStgEntry 9 } rcStgDesignatedRoot OBJECT-TYPE SYNTAX BridgeId ACCESS read-only STATUS mandatory DESCRIPTION "The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.1" ::= { rcStgEntry 10 } rcStgRootCost OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The cost of the path to the root as seen from this bridge." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.2" ::= { rcStgEntry 11 } rcStgRootPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The port number of the port which offers the lowest cost path from this bridge to the root bridge." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.3" ::= { rcStgEntry 12 } rcStgMaxAge OBJECT-TYPE SYNTAX Timeout ACCESS read-only STATUS mandatory DESCRIPTION "The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.4" ::= { rcStgEntry 13 } rcStgHelloTime OBJECT-TYPE SYNTAX Timeout ACCESS read-only STATUS mandatory DESCRIPTION "The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.5" ::= { rcStgEntry 14 } rcStgHoldTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.14" ::= { rcStgEntry 15 } rcStgForwardDelay OBJECT-TYPE SYNTAX Timeout ACCESS read-only STATUS mandatory DESCRIPTION "This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to rcStgBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.]" REFERENCE "IEEE 802.1D-1990: Section 4.5.3.6" ::= { rcStgEntry 16 } rcStgBridgeMaxAge OBJECT-TYPE SYNTAX Timeout (600..4000) ACCESS read-write STATUS mandatory DESCRIPTION "The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of rcStgBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.8" DEFVAL { 2000 } ::= { rcStgEntry 17 } rcStgBridgeHelloTime OBJECT-TYPE SYNTAX Timeout (100..1000) ACCESS read-write STATUS mandatory DESCRIPTION "The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.9" DEFVAL { 200 } ::= { rcStgEntry 18 } rcStgBridgeForwardDelay OBJECT-TYPE SYNTAX Timeout (400..3000) ACCESS read-write STATUS mandatory DESCRIPTION "The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of rcStgBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.10" DEFVAL { 1500 } ::= { rcStgEntry 19 } rcStgEnableStp OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Indicate whether the spanning tree protocol should be active in this STG." DEFVAL { true } ::= { rcStgEntry 20 } rcStgStpTrapEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Indicate whether traps relating to the spanning tree protocol should be sent for this STG." DEFVAL { true } ::= { rcStgEntry 21 } rcStgPortMembers OBJECT-TYPE SYNTAX OCTET STRING (SIZE(88)) ACCESS read-write STATUS mandatory DESCRIPTION "A bitfield used to identify which ports in the system are members this STG. The bitfield is 32 octets long representing ports 0 to 255 (inclusive)." ::= { rcStgEntry 22 } rcStgRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Row status." ::= { rcStgEntry 23 } rcStgPortStpState OBJECT-TYPE SYNTAX OCTET STRING (SIZE(176)) ACCESS read-only STATUS mandatory DESCRIPTION "Every 2 bitfields used to identify a port state in this STG. Port state is cataloged as non-stp(0), blocking(1), learning(2), and forwarding(3)." ::= { rcStgEntry 24 } -- STG Port Table rcStgPortTable OBJECT-TYPE SYNTAX SEQUENCE OF RcStgPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table used to store Spanning Tree Group (STG) port related information. If a port is associated with more than one STGs, the port will have one entry in this table for each STG it assigned to." ::= { rcStg 5 } rcStgPortEntry OBJECT-TYPE SYNTAX RcStgPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "STG Port attributes" INDEX { rcStgPort, rcStgPortStgId } ::= { rcStgPortTable 1 } RcStgPortEntry ::= SEQUENCE { rcStgPort InterfaceIndex, rcStgPortStgId INTEGER, rcStgPortPriority INTEGER, rcStgPortState INTEGER, rcStgPortEnableStp TruthValue, rcStgPortFastStart TruthValue, rcStgPortPathCost INTEGER, rcStgPortDesignatedRoot BridgeId, rcStgPortDesignatedCost INTEGER, rcStgPortDesignatedBridge BridgeId, rcStgPortDesignatedPort OCTET STRING, rcStgPortForwardTransitions Counter, rcStgPortInConfigBpdus Counter, rcStgPortInTcnBpdus Counter, rcStgPortInBadBpdus Counter, rcStgPortOutConfigBpdus Counter, rcStgPortOutTcnBpdus Counter, rcStgPortRowStatus RowStatus, rcStgPortChangeDetection TruthValue } rcStgPort OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "The port number of the port for which this entry contains Spanning Tree Protocol management information." REFERENCE "IEEE 802.1D-1990: Section 6.8.2.1.2" ::= { rcStgPortEntry 1 } rcStgPortStgId OBJECT-TYPE SYNTAX INTEGER (1..128) ACCESS read-only STATUS mandatory DESCRIPTION "The STG identifier this port is assigned to." ::= { rcStgPortEntry 2 } rcStgPortPriority OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of rcStgPort." REFERENCE "IEEE 802.1D-1990: Section 4.5.5.1" DEFVAL { 128 } ::= { rcStgPortEntry 3 } rcStgPortState OBJECT-TYPE SYNTAX INTEGER { disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6) } ACCESS read-only STATUS mandatory DESCRIPTION "The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see rcStgPortEnable), this object will have a value of disabled(1)." REFERENCE "IEEE 802.1D-1990: Section 4.5.5.2" ::= { rcStgPortEntry 4 } rcStgPortEnableStp OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "The enabled/disabled status of the port." REFERENCE "IEEE 802.1D-1990: Section 4.5.5.2" DEFVAL { true } ::= { rcStgPortEntry 5 } rcStgPortFastStart OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "When this flag is set, the port is moved straight to the forwarding(5) state upon being enabled." DEFVAL { false } ::= { rcStgPortEntry 6 } rcStgPortPathCost OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN." REFERENCE "IEEE 802.1D-1990: Section 4.5.5.3" ::= { rcStgPortEntry 7 } rcStgPortDesignatedRoot OBJECT-TYPE SYNTAX BridgeId ACCESS read-only STATUS mandatory DESCRIPTION "The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached." REFERENCE "IEEE 802.1D-1990: Section 4.5.5.4" ::= { rcStgPortEntry 8 } rcStgPortDesignatedCost OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs." REFERENCE "IEEE 802.1D-1990: Section 4.5.5.5" ::= { rcStgPortEntry 9 } rcStgPortDesignatedBridge OBJECT-TYPE SYNTAX BridgeId ACCESS read-only STATUS mandatory DESCRIPTION "The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment." REFERENCE "IEEE 802.1D-1990: Section 4.5.5.6" ::= { rcStgPortEntry 10 } rcStgPortDesignatedPort OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) ACCESS read-only STATUS mandatory DESCRIPTION "The Port Identifier of the port on the Designated Bridge for this port's segment." REFERENCE "IEEE 802.1D-1990: Section 4.5.5.7" ::= { rcStgPortEntry 11 } rcStgPortForwardTransitions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times this port has transitioned from the Learning state to the Forwarding state." ::= { rcStgPortEntry 12 } rcStgPortInConfigBpdus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of Config BPUDs received by this port." ::= { rcStgPortEntry 13 } rcStgPortInTcnBpdus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of Topology Change Notification BPUDs received by this port." ::= { rcStgPortEntry 14 } rcStgPortInBadBpdus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of Bad BPUDs received by this port." ::= { rcStgPortEntry 15 } rcStgPortOutConfigBpdus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of Config BPUDs transmitted by this port." ::= { rcStgPortEntry 16 } rcStgPortOutTcnBpdus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of Topology Change Notification BPUDs transmitted by this port." ::= { rcStgPortEntry 17 } rcStgPortRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Row status." ::= { rcStgPortEntry 18 } rcStgPortChangeDetection OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "If disabled, topology change notifications are not sent for the port." DEFVAL { true } ::= { rcStgPortEntry 19 } rcStgNotAllowedPorts OBJECT-TYPE SYNTAX PortSet ACCESS read-only STATUS mandatory DESCRIPTION "A bitfield used to identify which ports in the system that cannot be assigned to any STG (i.e., which ports are single routable ports). The bitfield is 32 octets long representing ports 0 to 255 (inclusive)." ::= { rcStg 6 } -- rcBridge Group -- Forwarding Database for Transparent Bridges rcBridgeFdbTable OBJECT-TYPE SYNTAX SEQUENCE OF RcBridgeFdbEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is an replacement to the standard dot1dTpFdbTable in rfc1493." ::= { rcBridge 1 } rcBridgeFdbEntry OBJECT-TYPE SYNTAX RcBridgeFdbEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a specific unicast MAC address for which the bridge has some forwarding information." INDEX { rcBridgeFdbStatus, rcBridgeFdbAddress, rcBridgeFdbVlanId } ::= { rcBridgeFdbTable 1 } RcBridgeFdbEntry ::= SEQUENCE { rcBridgeFdbStatus INTEGER, rcBridgeFdbAddress MacAddress, rcBridgeFdbPort InterfaceIndex, rcBridgeFdbMonitor TruthValue, rcBridgeFdbPriority INTEGER, --excluded rcBridgeFdbQosLevel INTEGER, rcBridgeFdbVlanId INTEGER } rcBridgeFdbStatus OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2), learned(3), self(4), mgmt(5) } ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the status of this entry." ::= { rcBridgeFdbEntry 1 } rcBridgeFdbAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "A unicast MAC address for which the bridge has forwarding and/or filtering information." REFERENCE "IEEE 802.1D-1990: Section 3.9.1, 3.9.2" ::= { rcBridgeFdbEntry 2 } rcBridgeFdbPort OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of rcBridgeFdbAddress has been seen. A value of '0' indicates that the port number has not been learned but that the bridge does have some forwarding/filtering information about this address (e.g. in the dot1dStaticTable). Implementors are encouraged to assign the port value to this object whenever it is learned even for addresses for which the corresponding value of rcBridgeFdbStatus is not learned(3)." ::= { rcBridgeFdbEntry 3 } rcBridgeFdbMonitor OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate whether monitoring should be performed on this unicast MAC address. If monitoring is enabled, any packet received with a matching destination MAC address will be forwarded to the port configured to receive monitor traffic." ::= { rcBridgeFdbEntry 4 } rcBridgeFdbPriority OBJECT-TYPE SYNTAX INTEGER { low(0), high(1) } ACCESS read-write STATUS deprecated DESCRIPTION "Used to indicate the priority of the incoming frames with this destination Mac Address." DEFVAL { low } ::= { rcBridgeFdbEntry 5 } rcBridgeFdbQosLevel OBJECT-TYPE SYNTAX INTEGER { level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate the qos level of the incoming frames with this destination Mac Address." DEFVAL { level1 } ::= { rcBridgeFdbEntry 6 } rcBridgeFdbVlanId OBJECT-TYPE SYNTAX INTEGER (1..4094) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { rcBridgeFdbEntry 7 } rcBridgeFdbTblSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of entries in the bridge forwarding database table." ::= { rcBridge 2 } -- The Static (Destination-Address) Database rcBridgeStaticTable OBJECT-TYPE SYNTAX SEQUENCE OF RcBridgeStaticEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is a proprietary replacement to the standard dot1dStaticTable in rfc1493." ::= { rcBridge 3 } rcBridgeStaticEntry OBJECT-TYPE SYNTAX RcBridgeStaticEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table containing forwarding information about unicast entries configured into the bridge by management. This information is used by the transparent bridging function in determining how to propagate a received frame." INDEX { rcBridgeStaticAddress, rcBridgeStaticPort, rcBridgeStaticVlanId } ::= { rcBridgeStaticTable 1 } RcBridgeStaticEntry ::= SEQUENCE { rcBridgeStaticAddress MacAddress, rcBridgeStaticPort InterfaceIndex, rcBridgeStaticMonitor TruthValue, rcBridgeStaticPriority INTEGER, --excluded rcBridgeStaticStatus INTEGER, rcBridgeStaticQosLevel INTEGER, rcBridgeStaticVlanId INTEGER } rcBridgeStaticAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "The MAC address of this entry." ::= { rcBridgeStaticEntry 1 } rcBridgeStaticPort OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "Port on which the MAC address is found." ::= { rcBridgeStaticEntry 2 } rcBridgeStaticMonitor OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate whether monitoring should be performed on incoming packets that match this entry." ::= { rcBridgeStaticEntry 3 } rcBridgeStaticPriority OBJECT-TYPE SYNTAX INTEGER { low(0), high(1) } ACCESS read-write STATUS deprecated DESCRIPTION "Used to indicate forwarding priority of incoming packets that match this entry." DEFVAL { low } ::= { rcBridgeStaticEntry 4 } rcBridgeStaticStatus OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2), permanent(3), deleteOnReset(4), deleteOnTimeout(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates the status of this entry. The default value is permanent(3)." ::= { rcBridgeStaticEntry 5 } rcBridgeStaticQosLevel OBJECT-TYPE SYNTAX INTEGER { level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate the qos level." DEFVAL { level1 } ::= { rcBridgeStaticEntry 6 } rcBridgeStaticVlanId OBJECT-TYPE SYNTAX INTEGER (1..4094) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { rcBridgeStaticEntry 7 } rcBridgeStaticTblSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of entries in the bridge static table." ::= { rcBridge 4 } -- The filtering (Destination-Address) Database rcBridgeFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF RcBridgeFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is a proprietary replacement to the standard dot1dStaticTable (Filtering information) in rfc1493." ::= { rcBridge 5 } rcBridgeFilterEntry OBJECT-TYPE SYNTAX RcBridgeFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table containing filtering information configured into the bridge by management specifying a destination address on a specific port and a set of incoming ports. Frames received from one of the incoming ports and containing the specific destination addresses are not allowed to be forwarded." INDEX { rcBridgeFilterAddress, rcBridgeFilterPort, rcBridgeFilterVlanId } ::= { rcBridgeFilterTable 1 } RcBridgeFilterEntry ::= SEQUENCE { rcBridgeFilterAddress MacAddress, rcBridgeFilterPort InterfaceIndex, rcBridgeFilterNotAllowedFrom OCTET STRING, rcBridgeFilterStatus INTEGER, rcBridgeFilterVlanId INTEGER } rcBridgeFilterAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "The MAC address of this entry. This address is used to match the destination address of incoming packets." ::= { rcBridgeFilterEntry 1 } rcBridgeFilterPort OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "Port on which this MAC address is found." ::= { rcBridgeFilterEntry 2 } rcBridgeFilterNotAllowedFrom OBJECT-TYPE SYNTAX OCTET STRING (SIZE(88)) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate a set of ports. Traffic arriving on any of the specified ports is not forwarded to this MAC address." ::= { rcBridgeFilterEntry 3 } rcBridgeFilterStatus OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2), permanent(3), deleteOnReset(4), deleteOnTimeout(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates the status of this entry. The default value is permanent(3)." ::= { rcBridgeFilterEntry 4 } rcBridgeFilterVlanId OBJECT-TYPE SYNTAX INTEGER (1..4094) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { rcBridgeFilterEntry 5 } rcBridgeFilterTblSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of entries in the bridge filter table." ::= { rcBridge 6 } -- The unknown mac discard config table rcBridgeUnknownMacDiscardTable OBJECT-TYPE SYNTAX SEQUENCE OF RcBridgeUnknownMacDiscardEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is used to configure the 'unknown mac discard' feature. This feature applies to layer 2 and layer 3 packets coming from or going out to a specific physical port." ::= { rcBridge 7 } rcBridgeUnknownMacDiscardEntry OBJECT-TYPE SYNTAX RcBridgeUnknownMacDiscardEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table containing information configuring the 'unknown mac discard' feature." INDEX { rcBridgeUnknownMacDiscardIfIndex } ::= { rcBridgeUnknownMacDiscardTable 1 } RcBridgeUnknownMacDiscardEntry ::= SEQUENCE { rcBridgeUnknownMacDiscardIfIndex InterfaceIndex, rcBridgeUnknownMacDiscardAutoLearnEnable TruthValue, rcBridgeUnknownMacDiscardAutoLearnMode INTEGER, rcBridgeUnknownMacDiscardAutoLearnTableMode INTEGER, rcBridgeUnknownMacDiscardLogViolations INTEGER, rcBridgeUnknownMacDiscardSendTrap INTEGER, rcBridgeUnknownMacDiscardDisablePort INTEGER, rcBridgeUnknownMacDiscardDefaultAutoLearnMonitor INTEGER, rcBridgeUnknownMacDiscardDefaultAutoLearnPriority INTEGER, rcBridgeUnknownMacDiscardMacCountMax INTEGER, rcBridgeUnknownMacDiscardMacCountCur INTEGER } rcBridgeUnknownMacDiscardIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "Port on which this 'unknown mac discard' configuration applied to." ::= { rcBridgeUnknownMacDiscardEntry 1 } rcBridgeUnknownMacDiscardAutoLearnEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used to enable/disable the auto-learn capability of a specific port. The default value is auto-learn disabled." ::= { rcBridgeUnknownMacDiscardEntry 2 } rcBridgeUnknownMacDiscardAutoLearnMode OBJECT-TYPE SYNTAX INTEGER { oneShot(1), continuous(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used to control the auot-learn mode to either one-shot or continuous. In one-shot mode, the first n MAC addresses will be learned. The number n is dependents on the system's available resource. In continuous mode, MAC address is continuous learned until the resource limit is reached. After that the subsequent MAC will be disallowed until one of the original learned MAC is aged out. The default value is one-shot mode." ::= { rcBridgeUnknownMacDiscardEntry 3 } rcBridgeUnknownMacDiscardAutoLearnTableMode OBJECT-TYPE SYNTAX INTEGER { unlock(1), lock(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This MIB variable is used to lock or unlock the auto-learn MAC table. When the auto-learn table is lock neither new MAC will be learned nor the original learned MAC will be aged out. User needs to lock the auto-learn table before MAC addresses can be save to the NVRAM. The whole auto-learn table will be flushed when the setting change from lock to unlock mode. The default value is unlock mode." ::= { rcBridgeUnknownMacDiscardEntry 4 } rcBridgeUnknownMacDiscardLogViolations OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable controls the logging action that the system will take when a MAC address violation event was detected. The value 'enable' means a log record will be written to the system log file when a violation event was detected. The default value is enable." ::= { rcBridgeUnknownMacDiscardEntry 5 } rcBridgeUnknownMacDiscardSendTrap OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable controls the send trap action that system will take when a MAC address violation event was detected. The value 'enable' means a SNMP trap packet will be send to the management station when a violation event was detected. The default value is disable." ::= { rcBridgeUnknownMacDiscardEntry 6 } rcBridgeUnknownMacDiscardDisablePort OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable controls the 'disable-port' action that system will take when a MAC address violation event was detected. The value 'enable' means the specific port will be disabled when the violation event was detected. It needs user manually to bring the port back once it was disabled. The default value is disable." ::= { rcBridgeUnknownMacDiscardEntry 7 } rcBridgeUnknownMacDiscardDefaultAutoLearnMonitor OBJECT-TYPE SYNTAX INTEGER { none(1), monitor(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable controls the default monitor setting of an auto-learn MAC address. The value 'monitor' means a copy of packet that send from or to the auto-learned MAC address will be forwarded to the designated monitoring port on the system. The default value is none." ::= { rcBridgeUnknownMacDiscardEntry 8 } rcBridgeUnknownMacDiscardDefaultAutoLearnPriority OBJECT-TYPE SYNTAX INTEGER { low(1), high(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable controls the default priority setting of an auto-learn MAC address. The value 'low' means packets send from the MAC address is forwarded at low priority. The value 'high' means packets send from the MAC address is forwarded at high priority. The default value is low." ::= { rcBridgeUnknownMacDiscardEntry 9 } rcBridgeUnknownMacDiscardMacCountMax OBJECT-TYPE SYNTAX INTEGER (0..2048) ACCESS read-write STATUS mandatory DESCRIPTION "This variable represents the maxium number of MACc that can be added to some port." DEFVAL { 2048 } ::= { rcBridgeUnknownMacDiscardEntry 10 } rcBridgeUnknownMacDiscardMacCountCur OBJECT-TYPE SYNTAX INTEGER (0..2048) ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the current number of MACs that have been added to some port." DEFVAL { 0 } ::= { rcBridgeUnknownMacDiscardEntry 11 } -- The Manual Edit table rcBridgeManualEditTable OBJECT-TYPE SYNTAX SEQUENCE OF RcBridgeManualEditEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is used to specify what MAC addresses can be learned on each port." ::= { rcBridge 8 } rcBridgeManualEditEntry OBJECT-TYPE SYNTAX RcBridgeManualEditEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table containing information of MAC addresses that can be learned." INDEX { rcBridgeManualEditAddress } ::= { rcBridgeManualEditTable 1 } RcBridgeManualEditEntry ::= SEQUENCE { rcBridgeManualEditAddress MacAddress, rcBridgeManualEditPorts PortSet, rcBridgeManualEditMonitor TruthValue, rcBridgeManualEditPriority INTEGER, rcBridgeManualEditStatus INTEGER } rcBridgeManualEditAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "This variable contains the source MAC address of an entry." ::= { rcBridgeManualEditEntry 1 } rcBridgeManualEditPorts OBJECT-TYPE SYNTAX PortSet ACCESS read-write STATUS mandatory DESCRIPTION "This variable contains the allowed ports on which the MAC address of this entry can be learned." ::= { rcBridgeManualEditEntry 2 } rcBridgeManualEditMonitor OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "This variable specifies the monitoring setting of the MAC address. The value 'true' means a copy of packet frame that send from or to the MAC address is forwarded to the designated monitoring port on the system. The default value is false." ::= { rcBridgeManualEditEntry 3 } rcBridgeManualEditPriority OBJECT-TYPE SYNTAX INTEGER { low(1), high(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable specifies the priority setting of the MAC address. The value 'low' means packet frames send from the MAC address is forwarded at low priority. The default value is low." ::= { rcBridgeManualEditEntry 4 } rcBridgeManualEditStatus OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2), active(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The variable controls the status of a MAC address in the table. The value 'active' is used to add the MAC address entry into the table. The value 'invalid' is used to delete the MAC address from the table." ::= { rcBridgeManualEditEntry 5 } rcBridgeManualEditTblSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of entries in the manual edit table." ::= { rcBridge 9 } -- The Auto Learn table rcBridgeAutoLearnTable OBJECT-TYPE SYNTAX SEQUENCE OF RcBridgeAutoLearnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains information of auto-learned MAC address when the 'unknow MAC discard' table's auto-learn is enabled. User must explicitly lock and save the table into NVRAM in order to have this table has the same configuration cross the system reset." ::= { rcBridge 10 } rcBridgeAutoLearnEntry OBJECT-TYPE SYNTAX RcBridgeAutoLearnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entries in this table are created automatically when the user explicitly does a lock operation on the auto-learn-table (i.e., when 'AutoLearnTableMode' is set to lock(2))." INDEX { rcBridgeAutoLearnAddress } ::= { rcBridgeAutoLearnTable 1 } RcBridgeAutoLearnEntry ::= SEQUENCE { rcBridgeAutoLearnAddress MacAddress, rcBridgeAutoLearnPort PortSet, rcBridgeAutoLearnMonitor TruthValue, rcBridgeAutoLearnPriority INTEGER, rcBridgeAutoLearnAction INTEGER } rcBridgeAutoLearnAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "This variable contains the source MAC address of the entries." ::= { rcBridgeAutoLearnEntry 1 } rcBridgeAutoLearnPort OBJECT-TYPE SYNTAX PortSet ACCESS read-only STATUS mandatory DESCRIPTION "This variable contains the port where the MAC address was learned." ::= { rcBridgeAutoLearnEntry 2 } rcBridgeAutoLearnMonitor OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "This variable contains the monitor setting of the MAC address. The value 'true' means a copy of packet frame that send from or to the MAC address is forwarded to the designated monitoring port on the system. This value should be synchronized with the setting of 'unknow MAC discard' table's 'Default AutoLearnMonitor' setting when the MAC address was learned." ::= { rcBridgeAutoLearnEntry 3 } rcBridgeAutoLearnPriority OBJECT-TYPE SYNTAX INTEGER { low(1), high(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable contains the priority setting of the MAC address. The value 'low' means packet frames send from the MAC address is forwarded at low priority. The value 'high' means packet frames send from the MAC address is forwarded at high priority. This value should be synchronized with the setting of 'unknow MAC discard' table's 'DefaultAutoLearnPriority' setting when the MAC address was learned." ::= { rcBridgeAutoLearnEntry 4 } rcBridgeAutoLearnAction OBJECT-TYPE SYNTAX INTEGER { none(0), convertToManualEdit(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable is for converting an auto-learned MAC address entry to a manual edit MAC address entry. This variable provides a mechanism for user to move a MAC address entry from auto-learn table to manual edit table." ::= { rcBridgeAutoLearnEntry 5 } rcBridgeAutoLearnTblSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of entries in the auto learn table." ::= { rcBridge 11 } -- The Statis Multicast table rcBridgeStaticMulticastTable OBJECT-TYPE --excluded SYNTAX SEQUENCE OF RcBridgeStaticMulticastEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { rcBridge 12 } rcBridgeStaticMulticastEntry OBJECT-TYPE SYNTAX RcBridgeStaticMulticastEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { rcBridgeStaticMulticastAddress } ::= { rcBridgeStaticMulticastTable 1 } RcBridgeStaticMulticastEntry ::= SEQUENCE { rcBridgeStaticMulticastAddress MacAddress, rcBridgeStaticMulticastForwardingPorts PortSet, rcBridgeStaticMulticastMltIds IdList, rcBridgeStaticMulticastRowStatus RowStatus } rcBridgeStaticMulticastAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "src mac addr." ::= { rcBridgeStaticMulticastEntry 1 } rcBridgeStaticMulticastForwardingPorts OBJECT-TYPE SYNTAX PortSet ACCESS read-write STATUS mandatory DESCRIPTION "ports for forward this mac" ::= { rcBridgeStaticMulticastEntry 2 } rcBridgeStaticMulticastMltIds OBJECT-TYPE SYNTAX IdList ACCESS read-write STATUS mandatory DESCRIPTION "list of mlts this mac will be forwarded on" ::= { rcBridgeStaticMulticastEntry 3 } rcBridgeStaticMulticastRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "row status" ::= { rcBridgeStaticMulticastEntry 4 } rcBridgeStaticMulticastTblSize OBJECT-TYPE --excluded SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of entries in the static multicast table." ::= { rcBridge 13 } rcRateLimitTable OBJECT-TYPE SYNTAX SEQUENCE OF RcRateLimitEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { rcBridge 14 } rcRateLimitEntry OBJECT-TYPE SYNTAX RcRateLimitEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { rcRateLimitIfIndex, rcRateLimitIfTrafficType } ::= { rcRateLimitTable 1 } RcRateLimitEntry ::= SEQUENCE { rcRateLimitIfIndex InterfaceIndex, rcRateLimitIfTrafficType INTEGER, rcRateLimitIfAllowedRate INTEGER, rcRateLimitIfEnable TruthValue, rcRateLimitIfAllowedRatePps INTEGER } rcRateLimitIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "Port ifindex." ::= { rcRateLimitEntry 1 } rcRateLimitIfTrafficType OBJECT-TYPE SYNTAX INTEGER { broadcast(1), multicast(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Type of traffic allowed." DEFVAL { broadcast } ::= { rcRateLimitEntry 2 } rcRateLimitIfAllowedRate OBJECT-TYPE SYNTAX INTEGER (1..25) ACCESS read-write STATUS mandatory DESCRIPTION "Allowed traffic rate. If chassis type is 8100." DEFVAL { 25 } ::= { rcRateLimitEntry 3 } rcRateLimitIfEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Turn on/off rate limiting on this interface." DEFVAL { false } ::= { rcRateLimitEntry 4 } rcRateLimitIfAllowedRatePps OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Allowed traffic rate per second. If chassis type is 8600." ::= { rcRateLimitEntry 5 } -- rcBoot Group rcBootFlashSwVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS obsolete DESCRIPTION "BootFlashSwVersion indicates the software version in the Flash." ::= { rcBoot 1 } rcBootPcmciaSwVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS obsolete DESCRIPTION "BootPcmciaSwVersion indicate the software version in the Pcmcia card." ::= { rcBoot 2 } rcBootLastBootSource OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS obsolete DESCRIPTION "Indicates the boot source of the last the system boot." ::= { rcBoot 3 } rcBootPrimary OBJECT-TYPE SYNTAX INTEGER { flash(1), pcmcia(2), net(3), skip(4) } ACCESS read-write STATUS obsolete DESCRIPTION "BootPrimary is indicator for the primary source to boot the system." DEFVAL { flash } ::= { rcBoot 4 } rcBootSecondary OBJECT-TYPE SYNTAX INTEGER { flash(1), pcmcia(2), net(3), skip(4) } ACCESS read-write STATUS obsolete DESCRIPTION "BootSecondary indicates the second choice of the boot source." DEFVAL { pcmcia } ::= { rcBoot 5 } rcBootTertiary OBJECT-TYPE SYNTAX INTEGER { flash(1), pcmcia(2), net(3), skip(4) } ACCESS read-write STATUS obsolete DESCRIPTION "BootTertiary indicates the third choice of boot source." DEFVAL { net } ::= { rcBoot 6 } -- rcDevice Group rcDeviceLastBootSource OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the source of the software image the system was last booted with." ::= { rcDevice 1 } rcDevicePrimarySource OBJECT-TYPE SYNTAX INTEGER { flash(1), pcmcia(2), net(3), skip(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate the primary choice to get a system software image." ::= { rcDevice 2 } rcDevicePrimarySourceFileName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate a file number, if applicable." ::= { rcDevice 3 } rcDeviceSecondarySource OBJECT-TYPE SYNTAX INTEGER { flash(1), pcmcia(2), net(3), skip(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate the secondary choice to get a system software image." ::= { rcDevice 4 } rcDeviceSecondarySourceFileName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate a file name, if applicable." ::= { rcDevice 5 } rcDeviceTertiarySource OBJECT-TYPE SYNTAX INTEGER { flash(1), pcmcia(2), net(3), skip(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate the tertiary choice to get a system software image." ::= { rcDevice 6 } rcDeviceTertiarySourceFileName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate a file name, if applicable." ::= { rcDevice 7 } rcDeviceConfigSource OBJECT-TYPE SYNTAX INTEGER { flash(1), pcmcia(2), nvram(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate the location to get a system configuration file during system boot." ::= { rcDevice 8 } rcDeviceConfigSourceFileName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate a file name, if applicable." ::= { rcDevice 9 } rcDeviceFlashBytesUsed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of bytes used in the system's configuration flash device." ::= { rcDevice 10 } rcDeviceFlashBytesFree OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of bytes available in the system's configuration flash device." ::= { rcDevice 11 } rcDevicePcmciaBytesUsed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of bytes used in the system's PCMCIA device." ::= { rcDevice 12 } rcDevicePcmciaBytesFree OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of bytes available in the system's PCMCIA device." ::= { rcDevice 13 } rcDeviceAction OBJECT-TYPE SYNTAX INTEGER { none(1), squeezeFlash(2), squeezePcmcia(3), formatFlash(4), formatPcmcia(5), recoverFlash(6), recoverPcmcia(7) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to specify a particular action to perform on one of the system's device." ::= { rcDevice 14 } rcDeviceResult OBJECT-TYPE SYNTAX INTEGER { none(1), inProgress(2), success(3), fail(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the result of the last action performed on one of the system's device." ::= { rcDevice 15 } rcDeviceFlashNumFiles OBJECT-TYPE SYNTAX INTEGER (0..128) ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of files available in the system's configuration flash device." ::= { rcDevice 16 } rcDevicePcmciaNumFiles OBJECT-TYPE SYNTAX INTEGER (0..128) ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of files available in the system's PCMCIA device." ::= { rcDevice 17 } -- The Device Flash Table rcDeviceFlashTable OBJECT-TYPE SYNTAX SEQUENCE OF RcDeviceFlashEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Flash table." ::= { rcDevice 25 } rcDeviceFlashEntry OBJECT-TYPE SYNTAX RcDeviceFlashEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the system's flash table." INDEX { rcDeviceFlashFileNum } ::= { rcDeviceFlashTable 1 } RcDeviceFlashEntry ::= SEQUENCE { rcDeviceFlashFileNum INTEGER, rcDeviceFlashFileName DisplayString, rcDeviceFlashFileVersion DisplayString, rcDeviceFlashFileType INTEGER, rcDeviceFlashFileMode INTEGER, rcDeviceFlashFileSize INTEGER, rcDeviceFlashFileCrc INTEGER, rcDeviceFlashFileStatus INTEGER, rcDeviceFlashRowStatus RowStatus } rcDeviceFlashFileNum OBJECT-TYPE SYNTAX INTEGER (0..128) ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate a particular file in flash." ::= { rcDeviceFlashEntry 1 } rcDeviceFlashFileName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate a flash file's name." ::= { rcDeviceFlashEntry 2 } rcDeviceFlashFileVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the flash file's version." ::= { rcDeviceFlashEntry 3 } rcDeviceFlashFileType OBJECT-TYPE SYNTAX INTEGER { config(1), log(2), trace(3), executable(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the flash file's type." ::= { rcDeviceFlashEntry 4 } rcDeviceFlashFileMode OBJECT-TYPE SYNTAX INTEGER { compressed(1), uncompressed(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the flash file's mode." ::= { rcDeviceFlashEntry 5 } rcDeviceFlashFileSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the flash file's size." ::= { rcDeviceFlashEntry 6 } rcDeviceFlashFileCrc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the flash file's CRC." ::= { rcDeviceFlashEntry 7 } rcDeviceFlashFileStatus OBJECT-TYPE SYNTAX INTEGER { active(1), deleted(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the flash file's status. A file that has been marked for deletion, but who's space has not been reclaimed yet is marked as 'deleted'." ::= { rcDeviceFlashEntry 8 } rcDeviceFlashRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Row status." ::= { rcDeviceFlashEntry 9 } -- The Device Pcmcia Table rcDevicePcmciaTable OBJECT-TYPE SYNTAX SEQUENCE OF RcDevicePcmciaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "PCMCIA table." ::= { rcDevice 26 } rcDevicePcmciaEntry OBJECT-TYPE SYNTAX RcDevicePcmciaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the system's PCMCIA table." INDEX { rcDevicePcmciaFileNum } ::= { rcDevicePcmciaTable 1 } RcDevicePcmciaEntry ::= SEQUENCE { rcDevicePcmciaFileNum INTEGER, rcDevicePcmciaFileName DisplayString, rcDevicePcmciaFileVersion DisplayString, rcDevicePcmciaFileType INTEGER, rcDevicePcmciaFileMode INTEGER, rcDevicePcmciaFileSize INTEGER, rcDevicePcmciaFileCrc INTEGER, rcDevicePcmciaFileStatus INTEGER, rcDevicePcmciaRowStatus RowStatus } rcDevicePcmciaFileNum OBJECT-TYPE SYNTAX INTEGER (0..128) ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate a particular file in PCMCIA." ::= { rcDevicePcmciaEntry 1 } rcDevicePcmciaFileName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the PCMCIA file's name." ::= { rcDevicePcmciaEntry 2 } rcDevicePcmciaFileVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the PCMCIA file's version." ::= { rcDevicePcmciaEntry 3 } rcDevicePcmciaFileType OBJECT-TYPE SYNTAX INTEGER { config(1), log(2), trace(3), executable(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the PCMCIA file's type." ::= { rcDevicePcmciaEntry 4 } rcDevicePcmciaFileMode OBJECT-TYPE SYNTAX INTEGER { compressed(1), uncompressed(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate a particular file in mode." ::= { rcDevicePcmciaEntry 5 } rcDevicePcmciaFileSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the PCMCIA file's size." ::= { rcDevicePcmciaEntry 6 } rcDevicePcmciaFileCrc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the PCMCIA file's CRC." ::= { rcDevicePcmciaEntry 7 } rcDevicePcmciaFileStatus OBJECT-TYPE SYNTAX INTEGER { active(1), deleted(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the PCMCIA file's status. A file that has been marked for deletion, but who's space has not been reclaimed yet is marked as 'deleted'." ::= { rcDevicePcmciaEntry 8 } rcDevicePcmciaRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Row status." ::= { rcDevicePcmciaEntry 9 } -- Multi-Link Trunking Table rcMltNumMlts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of MLTs currently defined in the switch." ::= { rcMlt 1 } rcMltPotentialMembers OBJECT-TYPE SYNTAX PortSet ACCESS read-only STATUS mandatory DESCRIPTION "The set of ports that are not members of any MLT." ::= { rcMlt 2 } rcMltTable OBJECT-TYPE SYNTAX SEQUENCE OF RcMltEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of Multi-Link Trunk entries. The number of entries is given by rcMltNumMlts." ::= { rcMlt 10 } rcMltEntry OBJECT-TYPE SYNTAX RcMltEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing configuration information for a particular Multi-Link Trunk." INDEX { rcMltId } ::= { rcMltTable 1 } RcMltEntry ::= SEQUENCE { rcMltId INTEGER, rcMltName DisplayString, rcMltPortMembers PortSet, rcMltPortType INTEGER, rcMltNumVlanIds INTEGER, rcMltVlanIds IdList, rcMltRowStatus RowStatus, rcMltEnable TruthValue, rcMltLoadBalance TruthValue, rcMltDistributionAlgorithm INTEGER, rcMltIfIndex InterfaceIndex } rcMltId OBJECT-TYPE SYNTAX INTEGER (1..32) ACCESS read-only STATUS mandatory DESCRIPTION "A value that uniquely identifies the Multi-Link Trunk associated with this entry." ::= { rcMltEntry 1 } rcMltName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "An administratively-assigned name for this MLT." ::= { rcMltEntry 2 } rcMltPortMembers OBJECT-TYPE SYNTAX PortSet ACCESS read-write STATUS mandatory DESCRIPTION "The set of ports that are members of this MLT." ::= { rcMltEntry 3 } rcMltPortType OBJECT-TYPE SYNTAX INTEGER { access(1), -- access port type trunk(2) -- trunk port type } ACCESS read-write STATUS mandatory DESCRIPTION "The type of MLT port: access(1) or trunk(2)." DEFVAL { access } ::= { rcMltEntry 4 } rcMltNumVlanIds OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of VLAN IDs that are stored in the rcMltVlanIds variable." ::= { rcMltEntry 5 } rcMltVlanIds OBJECT-TYPE SYNTAX IdList (SIZE (4096)) ACCESS read-write STATUS mandatory DESCRIPTION "An array used to identify which VLANs this MLT is associated with. Each VLAN ID is stored as a two octet value. The first octet in the pair holds bits 15-8 of the VLAN ID, while the second octet holds bits 7-0 of the VLAN ID." ::= { rcMltEntry 6 } rcMltRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Used to create/delete entries in the rcMltTable." ::= { rcMltEntry 7 } rcMltEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Enable the entry." DEFVAL { true } ::= { rcMltEntry 8 } rcMltLoadBalance OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Perform load balance?" DEFVAL { false } ::= { rcMltEntry 9 } rcMltDistributionAlgorithm OBJECT-TYPE SYNTAX INTEGER { none(1) } ACCESS read-write STATUS mandatory DESCRIPTION "none(1), ... It will be fill later" DEFVAL { none } ::= { rcMltEntry 10 } rcMltIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the 'logical' ifIndex assigned to this MLT." ::= { rcMltEntry 11 } -- rcWeb related information rcWebEnableServer OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Control whether the web server should be enabled. Setting this variable to true will make the server operational. Setting this variable to false will disable server." DEFVAL { false } ::= { rcWeb 1 } rcWebRWAUserName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..20)) ACCESS read-write STATUS mandatory DESCRIPTION "User name for the read-write-all web-server account." ::= { rcWeb 2 } rcWebRWAPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (1..20)) ACCESS read-write STATUS mandatory DESCRIPTION "Password for the read-write-all web-server account." ::= { rcWeb 3 } rcWebRWUserName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..20)) ACCESS read-write STATUS mandatory DESCRIPTION "User name for the read-write web-server account." ::= { rcWeb 4 } rcWebRWPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (1..20)) ACCESS read-write STATUS mandatory DESCRIPTION "Password for the read-write web-server account." ::= { rcWeb 5 } rcWebROUserName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..20)) ACCESS read-write STATUS mandatory DESCRIPTION "User name for the read-only web-server account." ::= { rcWeb 6 } rcWebROPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (1..20)) ACCESS read-write STATUS mandatory DESCRIPTION "Password for the read-only web-server account." ::= { rcWeb 7 } rcWebLastChange OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Last web-browser initiated configuration change since sysUpTime." ::= { rcWeb 8 } rcWebNumHits OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of hits to the web-server" ::= { rcWeb 9 } rcWebNumAccessChecks OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of access checks performed by the web-server" ::= { rcWeb 10 } rcWebNumAccessBlocks OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of accesses blocked by the web-server" ::= { rcWeb 11 } rcWebNumRxErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of receive errors encountered by the web-server" ::= { rcWeb 12 } rcWebNumTxErrors OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of transmit errors encountered by the web-server" ::= { rcWeb 13 } rcWebNumSetRequest OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of set-request to the web-server" ::= { rcWeb 14 } rcWebPrimaryHtmlSourceDir OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) ACCESS read-write STATUS mandatory DESCRIPTION "primary html source directory" DEFVAL { "local" } ::= { rcWeb 15 } rcWebSecondaryHtmlSourceDir OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) ACCESS read-write STATUS mandatory DESCRIPTION "secondary html source directory" DEFVAL { "pcmcia" } ::= { rcWeb 16 } rcWebTertiaryHtmlSourceDir OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) ACCESS read-write STATUS mandatory DESCRIPTION "tertiary html source directory" ::= { rcWeb 17 } rcWebRWL3UserName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..20)) ACCESS read-write STATUS mandatory DESCRIPTION "user name for the L3 web server account" ::= { rcWeb 18 } rcWebRWL3Password OBJECT-TYPE SYNTAX DisplayString (SIZE (1..20)) ACCESS read-write STATUS mandatory DESCRIPTION "password for the L3 web server account" ::= { rcWeb 19 } rcWebRWL2UserName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..20)) ACCESS read-write STATUS mandatory DESCRIPTION "user name for the L2 web server account" ::= { rcWeb 20 } rcWebRWL2Password OBJECT-TYPE SYNTAX DisplayString (SIZE (1..20)) ACCESS read-write STATUS mandatory DESCRIPTION "password for the L2 web server account" ::= { rcWeb 21 } rcWebDefaultDisplayRows OBJECT-TYPE SYNTAX INTEGER (10..100) ACCESS read-write STATUS mandatory DESCRIPTION "default display rows in html page." DEFVAL { 48 } ::= { rcWeb 22 } rcWebLastHostAccessBlocked OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "last host access blocked" ::= { rcWeb 23 } rcWebHelpTftpSourceDir OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-write STATUS mandatory DESCRIPTION "tftp source directory for help files" ::= { rcWeb 24 } rcWebHttpPort OBJECT-TYPE SYNTAX INTEGER (1..49151) ACCESS read-write STATUS mandatory DESCRIPTION "the HTTP port for web access" DEFVAL { 80 } ::= { rcWeb 25 } -- rcCli related information rcCliRWAUserName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..20)) ACCESS read-write STATUS mandatory DESCRIPTION "User name for the read-write-all CLI account." ::= { rcCli 1 } rcCliRWAPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "Password for the read-write-all CLI account." ::= { rcCli 2 } rcCliRWUserName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..20)) ACCESS read-write STATUS mandatory DESCRIPTION "User name for the read-write CLI account." ::= { rcCli 3 } rcCliRWPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "Password for the read-write CLI account." ::= { rcCli 4 } rcCliRWL3UserName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..20)) ACCESS read-write STATUS mandatory DESCRIPTION "User name for the read-write layer-3 CLI account." ::= { rcCli 5 } rcCliRWL3Password OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "Password for the read-write layer-3 CLI account." ::= { rcCli 6 } rcCliRWL2UserName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..20)) ACCESS read-write STATUS mandatory DESCRIPTION "User name for the read-write layer-2 CLI account." ::= { rcCli 7 } rcCliRWL2Password OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "Password for the read-write layer-2 CLI account." ::= { rcCli 8 } rcCliROUserName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..20)) ACCESS read-write STATUS mandatory DESCRIPTION "User name for the read-only CLI account." ::= { rcCli 9 } rcCliROPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "Password for the read-only CLI account." ::= { rcCli 10 } rcCliMaxTelnetSessions OBJECT-TYPE SYNTAX INTEGER (0..8) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate the maximum number of telnet sessions the system will support." DEFVAL { 8 } ::= { rcCli 11 } rcCliMaxRloginSessions OBJECT-TYPE SYNTAX INTEGER (0..8) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate the maximum number of rlogin sessions the system will support." DEFVAL { 8 } ::= { rcCli 12 } rcCliTimeout OBJECT-TYPE SYNTAX INTEGER (30..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate the amount of idle time, in seconds to wait before timing out telnet and rlogin sessions." DEFVAL { 900 } ::= { rcCli 13 } rcCliNumAccessViolations OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of CLI access violations detected by the system." ::= { rcCli 14 } rcCliRWL1UserName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..20)) ACCESS read-write STATUS mandatory DESCRIPTION "User name for the read-write layer-1 CLI account." ::= { rcCli 15 } rcCliRWL1Password OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "Password for the read-write layer-1 CLI account." ::= { rcCli 16 } -- Error Group rcErrorLevel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Error level indicator for the last error reported in the system. The meaning of this value are : 0 = Informative Information 1 = Warning Condition 2 = Error Condition 3 = Manufacturing Information 4 = Fatal Condition " ::= { rcError 1 } rcErrorCode OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Error code indicator for the last error reported in the system. This is an encoded value that identifies the software module that generated the error message as well as a specific error condition within that module. This value is transparent to the user. This value is intended to help Accelar support and development staff to isolate system problems." ::= { rcError 2 } rcErrorText OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Error string of the last error reported in the system." ::= { rcError 3 } rcErrorReturnCode OBJECT-TYPE SYNTAX INTEGER { none(100), resourceNotAvailable(101), operationNotAllowed(102), operationInProgress(103), invalidPortNumber(104), invalidSubnetAddress(105), invalidSubnetMask(106), invalidVlanId(107), invalidVlanName(108), invalidVlanType(109), invalidStgId(110), invalidProtocolId(111), invalidPortMembers(112), invalidStaticMembers(113), invalidNotAllowedMembers(114), destinationNotReachable(115), tableIsFull(116), nondualConnectorGigPort(117), testIdNotPresent(118), invalidTestId(119), invalidStatusChange(120), invalidCpuCard(121), invalidSrcPortChoice(122), dstPortUnspecified(123), srcPortOneUnspecified(124), srcPortTwoUnspecified(125), notSupported(126), userNameIsNonUnique(127), invalidName(128), cannotModifyThisField(130), invalidUserPasswordLength(131), thisUsernameExists(132), invalidIpAddress(133), invalidMacAddress(134), nosuchEntry(135), anotherLoopBackTestAlreadyRunning(136), protocolIdNotRoutable(137), autoNegotiateIsOn(138), noActionSpecified(139), invalidActionSpecified(140), cannotModifyAutoNegotiateIsOn(141), cannotModifyAutoPortIsFiber(142), autoNegotiationNotSupported(143), cannotSetAdminSpeed(144), cannotSetAdminDuplex(145), ospfRtrDeadIntIsnotMultOfHelloInt(146), ospfRtrDeadIntLessThan4TimesHelloInt(147), notUsed1(148), ospfBadAuthValue(149), ospfEnabled(150), ospfAreaNotFound(151), ospfBackboneArea(152), notInTestMode(153), ospfInvalidAreaRangeMask(154), ospfDuplicateEntry(155), ospfRangeNotAllocated(156), ospfAreaRangeNotFound(157), testRunning(158), nvramLimitExceeded(159), flowAlreadyExist(160), flowNotFound(161), duplicateIpAddress(163), conflictingIpAddress(164), invalidRouteCost(165), invalidNextHop(166), duplicateRoute(167), cannotFindRoute(168), cannotDeleteLocalRoute(169), badDhcpMinSec(170), badDhcpMaxHop(171), badDhcpMode(172), badAgentAddress(173), dhcpNotEnabled(174), dhcpForwardNotFound(175), dhcpDuplicateForward(176), dhcpMaxForward(177), dhcpBadEnable(178), invalidDeviceFileNumber(179), notExecutableDeviceFile(180), deletedDeviceFile(181), pcmciaNotPresent(182), pcmciaWriteProtected(183), discontiguousSubnetMask(184), invalidOspfMetric(185), ospfHostRouteNotFound(186), invalidMltId(187), invalidMltName(188), onlyOnePortInMlt(189), moreThan4PortsInMlt(190), portsInDifferentQuid(191), portAlreadyInAnotherMlt(192), invalidVlan(193), nonExistIpMcastAddriess(194), invalidIpMulticastAddress(195), portIsLocked(196), accessRestriction(197), invalidDeviceFileLength(198), duplicateAccessPolicyId(199), noDesiredAccessPolicyItem(200), ipfFilterNonExist(201), ipfInvalidVlanPriority(202), ipfInvalidDestinationAddress(203), ipfInvalidSourceAddress(204), ipfFilterDuplicate(205), ipfGlobalListDuplicate(206), ipfGlobalListNonExist(207), ipfBaseListDuplicate(208), ipfBaseListNonExist(209), ipfPortDuplicate(210), ipfPortNonExist(211), ipfListNonExist(212), snmpSnoopDisabled(213), invalidHostIpAddress(214), snoopStaticGroupExist(215), ripAnnouncePolicyNotFound(216), duplicateRipAnnouncePolicy(217), ospfAnnouncePolicyNotFound(218), duplicateOspfAnnouncePolicy(219), policyMatchNetEntryNotFound(220), duplicatePolicyNetEntry(221), policyAddrListEntryNotFound(222), duplicatePolicyAddrListEntry(223), policyAddrListIdNotFound(224), policyExactNetListNotFound(225), policyRangeNetListNotFound(226), policyRipGatewayListNotFound(227), policyRipInterfaceListNotFound(228), policyOspfRtrIdListNotFound(229), policyAnnounceInterfaceListNotFound(230), policyAdvertiseNetListNotFound(231), policyInjectNetListNotFound(232), invalidPolicyListIdListSize(233), policyAddrEntryNotFound(234), duplicatePolicyAddrEntry(235), disableThisPortFirst(236), mutinettingNotSupported(237), addingGlobalFilterToNonGlobalList(238), addingNonGlobalFilterToGlobalList(239), setFilteredPortMode(240), setFilteredPortEnableValue(241), invalidModeType(242), duplicateRipAcceptPolicy(243), ripAccepPolicyNotFound(244), duplicateOspfAcceptPolicy(245), ospfAccepPolicyNotFound(246), invalidAccessPolicyName(247), invalidAccessPolicyPolicyEnable(248), invalidAccessPolicyMode(249), invalidAccessPolicyService(250), invalidAccessPolicyPrecedence(251), invalidAccessPolicyNetAddress(252), invalidAccessPolicyTrustedHostAddress(253), invalidAccessPolicyTrustedHostUserName(254), invalidAccessPolicyAccessLevel(255), invalidAccessPolicyLogSetting(256), invalidAccessPolicyPolicyId(257), invalidAreaOptions(258), cannotDeleteAreaIfCountIsNotZero(259), ospfInterfaceNotFound(260), ospfIfAreaIdConflictsWithConfiguredAreaRange(261), applyingDuplicateGlobalFilterToPort(262), differentMltPortTypes(263), addPortToMltFailed(264), removePortFromMltFailed(265), mirrorPortInMlt(266), invalidDhcpAlwaysBroadcast(267), interfaceIsSetToTransmitRipV1(268), ripInterfaceDoesnotExist(269), interfaceIsNotRunningRip(270), cannotCreateVirtLinksThroughStubArea(271), invalidSyslogEnableSetting(272), invalidSyslogHostIpAddr(274), invalidSyslogHostUdpPort(275), invalidSyslogHostFacility(276), invalidSyslogModuleId(277), invalidSyslogSeverity(278), invalidSyslogMapInfoSeverity(279), invalidSyslogMapWarningSeverity(280), invalidSyslogMapErrorSeverity(281), invalidSyslogMapMfgSeverity(282), invalidSyslogMapFatalSeverity(283), invalidSyslogMapTraceMsgSetting(284), invalidSyslogMapTrapMsgSetting(285), invalidSyslogLogTraceMsgSetting(286), invalidSyslogLogTrapMsgSetting(287), invalidSyslogEntryEnableSetting(288), invalidSyslogMaxHostSetting(289), invalidSyslogHostId(290), duplicateSyslogEntry(291), syslogHostTableIsFull(292), invalidHoldDownTime(294), incompatibleAruHardware(295), invalidVrid(296), duplicateVrrpEntry(297), noVrrpIpAddressSpecified(298), invalidVrrpControlValue(299), invalidVrrpPriority(300), invalidVrrpAdvertisementInterval(301), maxNumOfVrrpsEntriesExceeded(302), policyNetListEntryNotFound(303), duplicatePolicyNetListEntry(304), policyNetListIdNotFound(305), filterOnAnEnabledPort(306), listOnAnEnabledPort(307), invalidIpFilterSrcOption(308), invalidIpFilterDstOption(309), invalidOspfAreaImportextOption(310), invalidOspfInterfaceMd5KeyIdLength(311), invalidOspfInterfaceMd5KeyLength(312), invalidIPXNetworkNumber(313), ipxCircuitAlreadyExists(314), ipxCircuitDoesNotExist(315), encapsulationIsNotAllowedOnSameSegment(316), encapsulationDoesNotMatchProtocolBasedVLAN(317), invalidDvmrpIfTblEnableValue(318), invalidDvmrpIfTblMetricValue(319), ipHostPartForSubnetAddrIsNonZero(320), globalMulticastNotEnabled(321), metricFieldIsCreatedButModified(322), invalidIpMRouteInterfaceTblTtlValue(323), invalidUdpPortNumber(324), invalidUdpProtocolNameLength(325), cannotModifyUdpProtocolName(326), udpProtocolEntryDoesnotexists(327), duplicateUdpProtocolEntry(328), cannotDelUdpProtocolEntryFwdEntriesExists(329), udpBroadcastIntfEntryDoesnotExists(330), duplicateUdpBroadcastIntfEntry(331), invalidUdpConfBroacastInterface(332), updConfIntfEntryNotEnabledForUdpBcastForwarding(333), udpPortFwdEntryDoesnotExists(334), duplicateUdpPortFwdEntryDoesnotExists(335), udpPortFwdEntryUdpPortInterfaceDoesnotExists(336), udpPortFwdListEntryDoesnotExists(337), duplicateUdpPortFwdListEntryDoesnotExists(338), udpPortFwdListEntryPortFwdIdDoesnotExists(339), udpPortFwdListEntryinvalidFwdIdListSize(340), cannotDeleteUdpPortFwdListEntryInterfaceUsingThisList(341), invalidIgmpSnoopDestAddress(342), invalidIgmpSnoopHostAddress(343), cannotDeleteDefaultUdpProtocolTblEntry(344), nextHopRouteIsStaticRoute(345), invalidUpdateIntervalValueInDVMRPGlobalTable(346), invalidTriggeredUpdateIntervalValueInDVMRPGlobalTable(347), invalidLeafTimeoutValueInDVMRPGlobalTable(348), invalidNbrTimeoutValueInDVMRPGlobalTable(349), invalidNbrProbeIntervalValueInDVMRPGlobalTable(350), invalidQueryIntervalValueInIgmpInterfaceTable(351), invalidVersionValueInIgmpInterfaceTable(352), invalidQueryMaxResponseTimeValueInIgmpInterfaceTable(353), invalidRobustnessValueInIgmpInterfaceTable(354), invalidLastMembQueryIntvlValueInIgmpInterfaceTable(355), invalidANDMaskInRcIpTosRuleGroup(356), invalidORRule1InRcIpTosRuleGroup(357), invalidORRule2InRcIpTosRuleGroup(358), invalidORRule3InRcIpTosRuleGroup(359), deleteStaticPortNotValid(360), maxEntriesForIgmpAccTbl(361), maxMaskNumberOfHostIgmpAccTbl(362), dvmrpIgmpExclusive(363), theSpecifiedAreaRangeMaskIsInvalid(364), invalidLengthOf2kBootConfigImageSource(365), invalidLengthOf2kBootConfigSource(366), preferenceOfStaticRouteIsInvalid(367), copyFileOutOfSpace(368), copyFileFileNotFound(369), copyFileInvalidDestination(370), copyFileInvalidSource(371), copyFileFail(372), invalidLinkFlapDetectAutoPortDown(373), invalidLinkFlapDetectFrequency(374), invalidLinkFlapDetectInterval(375), invalidLinkFlapDetectSendTrap(376), invalidQosLevel(377), invalidQosWeight(378), invalidQosThreshold(379), invalidTagToQosTableIeee1pValue(380), invalidTagToQosTableQosLevel(381), invalidDsFieldToQosTableDsField(382), invalidDsFieldToQosTableQosLevel(383), invalidQosToTagTableQosLevel(384), invalidQosToTagTableIeee1pValue(385), invalidQosLevelValue(386), invalidQosToDsFieldTableDsFieldValue(387), invalidQosToDsFieldTableQosLevel(388), invalidDiffServEnable(389), invalidDiffServType(390), invalidIeeeOverride(391), invalidVlanQosValue(392), invalidVlanTosValue(393), operationNotAllowedOnAccessPort(394), operationNotAllowedOnTaggingPort(395), invalidFileName(396), invalidDiaglogueDuplicateMirroredPort(397), invalidDiaglogueEnableValue(398), invalidDiaglogueEnableSetting(399), invalidDiaglogueModeSetting(400), invalidDiaglogueEntryId(401), srcMacVlanIsNotYetEnabled(402), srcMacVlanIsNotYetDisabled(403), invalidDiaglogueOperation(404), invalidMacAddressSpecied(405), maxResponseTimeGreaterThanQueryInterval(406), noModifyDsFltrAllowedOnDiffSrvCorePort(407), mltMoreThan4PortsInMgMlt(408), protocolRulesForThePortHasExceeded16(409), routeDoesNotExistsInTheRroutingTable(410), diagMirrorByPortTableAccessError(411), diagMirrorByPortInvalidMirroringPortSetting(412), igmpAdminVersionConfiguredLessThanOperatingVersion(413), canOnlyConfigureViaMltTable(414), dvmrpInterfaceTableIsFull(415), invalidDscpField(416), invalidDscpReservedField(417), disablePortPriorToChangingDiffServPortType(418), ipFilterInvalidId(419), rateLimitingExceeded(420), diagEntryMaxExceeded(421), onlyOneMirroringPortAllow(422), radiusServerExist(423), radiusServerNotExist(424), radiusServerInUse(425), radiusMaxServerNumExceeded(426), radiusInvalidAttribute(427), canNotChangeLocking(428), activationDisabled(429), zeroMac(430), atmBadVpi(431), atmBadVci(432), atmBadFramingMode(433), atmDestroyPvcFailed(434), atmBadName(435), atmBadEnable(436), atmBadpvcEncapsulation(437), atmBadPvdServiceType(438), atmBadPeakCellRate(439), atmBadSustainedCellRate(440), atmBadMaxBurstSize(441), atmBadMaxMtuSize(442), atmBadElanId(443), atmUnknownOperation(444), atmDestroy1483ElanFailed(445), atmBadPerformTagging(446), atmIlleagalElanDefinition(447), atmCreate1483ElanFailed(448), atmBadSnmpMessage(449), atmBadScrambleEnable(450), atmBadSignalingEnable(451), atmBadClockSource(452), atmBadLoopback(453), badRowStatus(454), atmBadLaneConfigMode(455), atmLecCreationFailed(456), atmBad1438Inarp(457), atmF5StartFailed(458), atmBadPvcId(459), atmBadConnectType(460), atmBadIpxEncapMethod(461), atmBadUniVersion(462), atmCreatePvcFailed(463), invalidLoginPromptLength(464), invalidPasswordPromptLength(465), invalidCliBannerLength(466), invalidCliBannerSize(467), invalidCliMotdLength(468), invalidCliMotdSize(469), invalidPortNameLength(470), invalidPortName(471), invalidMaxAdvertiseInterval(472), invalidMinAdvertiseInterval(473), invalidMaxInitialAdvertiseInterval(474), invalidMaxInitalAdvertments(475), invalidNeigborDeadInterval(476), invalidUserSetTimeYearValue(477), invalidUserSetTimeMonthValue(478), invalidUserSetTimeDateValue(479), invalidUserSetTimeHourValue(480), invalidUserSetTimeMinuteValue(481), invalidUserSetTimeSecondValue(482), rtcIsNotPresent(483), rtcIsNotRunning(484), maxMacCount(485), maxAdvertiseIntLessThanMinAdvertiseInt(486), minAdvertiseIntGreaterThanMaxAdvertiseInt(487), dvmrpNotEnabledGlobally(488), vrrpCriticalIpAddrNotEnable(489), vrrpInvalidCriticalIpAddr(490), metricConfigNotAllowed(491), posActiveNonBcpEnabledPort(492), posVlanNoMorePorts(493), posPortCanBeAdded(494), posNonBcpCanNotBeEnabled(495), posImageFilenameTooLong(496), posNoIpcpEnableOnMltPorts(497), posNoIpcpEnableOnTagPort(498), posNoIpxcpEnableOnMltPort(499), posNoIpxcpEnableOnTagPort(500), posDisableTagBeforeBcpDisable(501), posAssignIpBeforeIpcpEnable(502), posAssignIpxBeforeIpxcpEnable(503), posAssignIpBeforeRemoteIp(504), posKeepRemoteIpInSameSubnet(505), staticRouteEnabled(506), cannotChangeAutoLearnState(507), invalidVirtualIpAddr(508), virtualAndPhysicalIpNotInSameSubnet(509), vidNotAvailable(510), mgidNotAvailable(511), posNoIpcpEnableOnPolicyVlanPort(512), posNoIpxcpEnableOnPolicyVlanPort(513), posVrrpNotAllowed(514), webInvalidHttpPort(515), cannotAddMulticastStaticMac(516), posNoStpEnableWithBCPClosed(517), posAtmNoRip1(518), ipfFilterNumOverFilterSetLimit(519), ipfQosTrafficAverageRateOverLimit(520), ipfQosTrafficProfileNotExist(521), atmNoIpIpxConfigOnVlan(522), atmPvcIsInUse(523), globalFilterNotDisabled(524), dhcpNotOnByIpSubnetVlan(525), cannotConfigureDefaultGateway(526), routeExists(527), gatewayNotOnMgmtInterfaceSubnet(528), mgmtRouteTableFull(529), routeNotExists(530), invalidMacOffsetRangeForBW(531), invalidMacOffsetRangeForMG(532), atmPvcBadPeakCellRate(533), atmPvcBadSustainedCellRate(534), qosReservedQosLevel(535), ipfQosTrafficAvgRateZeroProfileEnable(536) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used primarily as an enumeration to list the proprietary return codes that this device can send to a management station in response to a failed SNMP operation." DEFVAL { none } ::= { rcError 4 } rcErrorSendTrap OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether to send trap upon receiving an error in the system." DEFVAL { true } ::= { rcError 5 } -- TRAPS rcCardDown NOTIFICATION-TYPE OBJECTS { rcCardIndex, rcCardAdminStatus, rcCardOperStatus } STATUS current DESCRIPTION "A rcCardDown trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcCardOperStatus object for one of its cards is about to transition into the down state." ::= { rcTraps 1 } rcCardUp NOTIFICATION-TYPE OBJECTS { rcCardIndex, rcCardAdminStatus, rcCardOperStatus } STATUS current DESCRIPTION "A rcCardUp trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcCardOperStatus object for one of its cards is about to transition into the up state." ::= { rcTraps 2 } rcErrorNotification NOTIFICATION-TYPE OBJECTS { rcErrorLevel, rcErrorCode, rcErrorText } STATUS current DESCRIPTION "A rcErrorNotification trap signifies that the SNMPv2 entity, acting in an agent role, has detected that an error condition has occured." ::= { rcTraps 3 } rcStpNewRoot NOTIFICATION-TYPE OBJECTS { rcStgId } STATUS current DESCRIPTION "A rcStpNewRoot trap signifies that the SNMPv2 entity, acting in an agent role, has detected the Spanning Tree Protocol has declared the device to be the new root of the spanning tree." ::= { rcTraps 4 } rcStpTopologyChange NOTIFICATION-TYPE OBJECTS { rcStgId, rcPortIndex } STATUS current DESCRIPTION "A rcStpTopologyChange trap signifies that the SNMPv2 entity, acting in an agent role, has detected the Spanning Tree Protocol has gone due a topology change event." ::= { rcTraps 5 } rcChasPowerSupplyDown NOTIFICATION-TYPE OBJECTS { rcChasPowerSupplyId, rcChasPowerSupplyOperStatus} STATUS current DESCRIPTION "A rcChasPowerSupplyDown trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcChasPowerSupplyOperStatus object for one of its power supply unit is about to transition into the down state." ::= { rcTraps 6 } rcChasFanDown NOTIFICATION-TYPE OBJECTS { rcChasFanId, rcChasFanOperStatus} STATUS current DESCRIPTION "A rcChasFanDown trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcChasFanOperStatus object for one of its power supply unit is about to transition into the down state." ::= { rcTraps 7 } rcLinkOscillation NOTIFICATION-TYPE OBJECTS { rcPortIndex } STATUS current DESCRIPTION "A rcLinkOscillation trap signifies that the SNMPv2 entity, acting in an agent role, has detected an excessive number of link state transitions on the specified port." ::= { rcTraps 8 } rcMacViolation NOTIFICATION-TYPE OBJECTS { rcErrorText, rcPortIndex } STATUS current DESCRIPTION "A rcMacViolation trap signifies that the SNMPv2 entity, acting in an agent role, has received a PDU with an invalid source MAC address." ::= { rcTraps 9 } rcSonetTrap NOTIFICATION-TYPE OBJECTS { rcPortIndex, rcPosSonetTrapType, rcPosSonetTrapIndication } STATUS current DESCRIPTION "A rcSonetTrap trap signifies that the SNMPv2 entity, acting in an agent role, has detected a change of status on a Sonet port." ::= { rcTraps 10 } rc2kCardDown NOTIFICATION-TYPE OBJECTS { rc2kCardIndex, rc2kCardFrontAdminStatus, rc2kCardFrontOperStatus } STATUS current DESCRIPTION "A rcCardDown trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcCardOperStatus object for one of its cards is about to transition into the down state." ::= { rcTraps 11 } rc2kCardUp NOTIFICATION-TYPE OBJECTS { rc2kCardIndex, rc2kCardFrontAdminStatus, rc2kCardFrontOperStatus } STATUS current DESCRIPTION "A rcCardUp trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcCardOperStatus object for one of its cards is about to transition into the up state." ::= { rcTraps 12 } rc2kTemperature NOTIFICATION-TYPE OBJECTS { rc2kChassisTemperature } STATUS current DESCRIPTION "A rc2kTemperature trap signifies that the SNMPv2 entity, acting in an agent role, has detected the chassis is over-heating." ::= { rcTraps 13 } rcChasPowerSupplyUp NOTIFICATION-TYPE OBJECTS { rcChasPowerSupplyId, rcChasPowerSupplyOperStatus} STATUS current DESCRIPTION "A rcChasPowerSupplyUp trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcChasPowerSupplyOperStatus object for one of its power supply unit is about to transition into the up state." ::= { rcTraps 14 } rc2kAtmPvcLinkStateChange NOTIFICATION-TYPE OBJECTS { rc2kAtmPvcIfIndex, rc2kAtmPvcVpi, rc2kAtmPvcVci, rc2kAtmPvcOamVcStatus } STATUS current DESCRIPTION "A rc2kAtmPvcLinkStateChange trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rc2kAtmPvcOamVcStatus object for one of PVC is about to transition into different state, either from up to down or from down to up." ::= { rcTraps 15 } -- Syslog Group rcSyslogGlobal OBJECT IDENTIFIER ::= { rcSyslog 1 } rcSyslogGlobalEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to enable/disable the SysLog feature. When enabled this feature will send a message to a server on a network that this configured to receive and store diagnostic messages from this device. The type of messages sent is user configurable." DEFVAL { true } ::= { rcSyslogGlobal 1 } rcSyslogGlobalMaxHosts OBJECT-TYPE SYNTAX INTEGER (0..10) ACCESS read-write STATUS mandatory DESCRIPTION "Maximun number of remote hosts considered 'active' and able to receive messages from the Syslog service on the router." DEFVAL { 5 } ::= { rcSyslogGlobal 2 } rcSyslogGlobalOperState OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2), emptyHostTbl(3), allHostDisabled(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The operational state of the syslog service on the router." DEFVAL { active } ::= { rcSyslogGlobal 3 } rcSyslogHostTbl OBJECT-TYPE SYNTAX SEQUENCE OF RcSyslogHostEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of remote host destinations for syslog." ::= { rcSyslog 2 } rcSyslogHostEntry OBJECT-TYPE SYNTAX RcSyslogHostEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing information for a particular entry in rcSyslogHostTable." INDEX { rcSyslogHostId } ::= { rcSyslogHostTbl 1 } RcSyslogHostEntry ::= SEQUENCE { rcSyslogHostId INTEGER, rcSyslogHostIpAddr IpAddress, rcSyslogHostUdpPort INTEGER, rcSyslogHostFacility INTEGER, rcSyslogHostModuleId INTEGER, rcSyslogHostModuleId2 INTEGER, rcSyslogHostSeverity INTEGER, rcSyslogHostMapInfoSeverity INTEGER, rcSyslogHostMapWarningSeverity INTEGER, rcSyslogHostMapErrorSeverity INTEGER, rcSyslogHostMapMfgSeverity INTEGER, rcSyslogHostMapFatalSeverity INTEGER, rcSyslogHostMapTraceMsg INTEGER, rcSyslogHostMapTrapMsg INTEGER, rcSyslogHostLogTraceMsgs TruthValue, rcSyslogHostLogTrapMsgs TruthValue, rcSyslogHostEnable TruthValue, rcSyslogHostRowStatus RowStatus } rcSyslogHostId OBJECT-TYPE SYNTAX INTEGER (1..10) ACCESS read-only STATUS mandatory DESCRIPTION "Host Id." ::= { rcSyslogHostEntry 1 } rcSyslogHostIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Host Ip Address" ::= { rcSyslogHostEntry 2 } rcSyslogHostUdpPort OBJECT-TYPE SYNTAX INTEGER (514..530) ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the UDP port to use to send syslog messages to the host." DEFVAL { 514 } ::= { rcSyslogHostEntry 3 } rcSyslogHostFacility OBJECT-TYPE SYNTAX INTEGER { local0(128), local1(136), local2(144), local3(152), local4(160), local5(168), local6(176), local7(184) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the UNIX facility used in messages to the syslog host. Default is LOCAL7." DEFVAL { local7 } ::= { rcSyslogHostEntry 4 } rcSyslogHostModuleId OBJECT-TYPE SYNTAX INTEGER { common (1), -- '00000001'H snmp (2), -- '00000002'H rmon (4), -- '00000004'H portmgr (8), -- '00000008'H chasmgr (16), -- '00000010'H bridge (32), -- '00000020'H ospf (64), -- '00000040'H hwif (128), -- '00000080'H sim (256), -- '00000100'H cpp (512), -- '00000200'H netdrv (1024), -- '00000400'H vlanmgr (2048), -- '00000800'H cli (4096), -- '00001000'H main (8192), -- '00002000'H p2ip (16384), -- '00004000'H rcip (32768), -- '00008000'H rompager (65536), -- '00010000'H acif (131072), -- '00020000'H gbip (262144), -- '00040000'H wdt (524288), -- '00080000'H tdp (1048576), -- '00100000'H mandiag (2097152), -- '00200000'H mantest (4194304), -- '00400000'H igmp (8388608), -- '00800000'H ipfil (16777216), -- '01000000'H mlt (33554432), -- '02000000'H ippolicy(67108864), -- '04000000'H ipmc (134217728), -- '08000000'H syslog (268435456) -- '10000000'H } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies for which modules/tasks syslog messages should be sent. Default is all modules/tasks." ::= { rcSyslogHostEntry 5 } rcSyslogHostModuleId2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Specifies for which modules/tasks syslog messages should be sent. Default is all modules/tasks." ::= { rcSyslogHostEntry 6 } rcSyslogHostSeverity OBJECT-TYPE SYNTAX INTEGER { info(1), warning(2), error(4), mfg(8), fatal(16) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the severity level for which syslog messages should be sent for the modules specifies in 'SyslogHostModule'." DEFVAL { info } ::= { rcSyslogHostEntry 7 } rcSyslogHostMapInfoSeverity OBJECT-TYPE SYNTAX INTEGER { emergency(1), alert(2), critical(3), error(4), warning(5), notice(6), info(7), debug(8) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the syslog severity to use for Accelar INFO messages. Default is INFO." DEFVAL { info } ::= { rcSyslogHostEntry 8 } rcSyslogHostMapWarningSeverity OBJECT-TYPE SYNTAX INTEGER { emergency(1), alert(2), critical(3), error(4), warning(5), notice(6), info(7), debug(8) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the syslog severity to use for Accelar WARNING messages. Default is WARNING. Should be <= INFO." DEFVAL { warning } ::= { rcSyslogHostEntry 9 } rcSyslogHostMapErrorSeverity OBJECT-TYPE SYNTAX INTEGER { emergency(1), alert(2), critical(3), error(4), warning(5), notice(6), info(7), debug(8) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the syslog severity to use for Accelar ERROR messages. Default is ERROR. Should be <= WARNING." DEFVAL { error } ::= { rcSyslogHostEntry 10 } rcSyslogHostMapMfgSeverity OBJECT-TYPE SYNTAX INTEGER { emergency(1), alert(2), critical(3), error(4), warning(5), notice(6), info(7), debug(8) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the syslog severity to use for Accelar Manufactoring messages. Dafault is ERROR." DEFVAL { error } ::= { rcSyslogHostEntry 11 } rcSyslogHostMapFatalSeverity OBJECT-TYPE SYNTAX INTEGER { emergency(1), alert(2), critical(3), error(4), warning(5), notice(6), info(7), debug(8) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the syslog severity to use for Accelar FATAL messages. Default is EMERGENCY. Should be <= ERROR." DEFVAL { emergency } ::= { rcSyslogHostEntry 12 } rcSyslogHostMapTraceMsg OBJECT-TYPE SYNTAX INTEGER { emergency(1), alert(2), critical(3), error(4), warning(5), notice(6), info(7), debug(8) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the syslog severity to use for syslog trace messages. Default is DEBUG." ::= { rcSyslogHostEntry 13 } rcSyslogHostMapTrapMsg OBJECT-TYPE SYNTAX INTEGER { emergency(1), alert(2), critical(3), error(4), warning(5), notice(6), info(7), debug(8) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the UNIX severity code to use for syslog messages for SNMP traps sent to the syslog host. Default is INFO." ::= { rcSyslogHostEntry 14 } rcSyslogHostLogTraceMsgs OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Indicate whether to activate the host to log the syslog trace messages." ::= { rcSyslogHostEntry 15 } rcSyslogHostLogTrapMsgs OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Indicate whether to activate the host to log the syslog messages for SNMP traps." ::= { rcSyslogHostEntry 16 } rcSyslogHostEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable messages to be sent to syslog host." DEFVAL { false } ::= { rcSyslogHostEntry 17 } rcSyslogHostRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Used to create/delete entries in the rcSyslogTable." ::= { rcSyslogHostEntry 18 } -- Diag Mirror by port Table rcDiagMirrorByPortTable OBJECT-TYPE SYNTAX SEQUENCE OF RcDiagMirrorByPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is used to configure the Mirror By Port feature. This feature allows the device to forward a copy of each packet seen on a particular port to a different port." ::= { rcDiag 1 } rcDiagMirrorByPortEntry OBJECT-TYPE SYNTAX RcDiagMirrorByPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing mirror by port information." INDEX { rcDiagMirrorByPortId } ::= { rcDiagMirrorByPortTable 1 } RcDiagMirrorByPortEntry ::= SEQUENCE { rcDiagMirrorByPortId INTEGER, rcDiagMirrorByPortMirroredPort InterfaceIndex, rcDiagMirrorByPortMirroringPort InterfaceIndex, rcDiagMirrorByPortMode INTEGER, rcDiagMirrorByPortEnable TruthValue, rcDiagMirrorByPortRowStatus RowStatus } rcDiagMirrorByPortId OBJECT-TYPE SYNTAX INTEGER (1..10) ACCESS read-only STATUS mandatory DESCRIPTION "Entry id." ::= { rcDiagMirrorByPortEntry 1 } rcDiagMirrorByPortMirroredPort OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-write STATUS mandatory DESCRIPTION "Used to configure the 'mirrored' port. The port where packets are copied from." ::= { rcDiagMirrorByPortEntry 2 } rcDiagMirrorByPortMirroringPort OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-write STATUS mandatory DESCRIPTION "Used to configure the 'mirroring' port. The port where packets are copied to." ::= { rcDiagMirrorByPortEntry 3 } rcDiagMirrorByPortMode OBJECT-TYPE SYNTAX INTEGER { tx(1), rx(2), both(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to configure the 'mode' of the mirror operation. 'tx' means packets being transmitted on the 'mirrored' port will be copied. 'rx' means packets received on the 'mirrored' port will be copied. 'both' means all traffic on the 'mirrored' port will be copied." DEFVAL { rx } ::= { rcDiagMirrorByPortEntry 4 } rcDiagMirrorByPortEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to enable/disable this entry." DEFVAL { true } ::= { rcDiagMirrorByPortEntry 5 } rcDiagMirrorByPortRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Row status of this entry." ::= { rcDiagMirrorByPortEntry 6 } -- Diag Port Conv Steering Table rcDiagPortConvSteeringTable OBJECT-TYPE SYNTAX SEQUENCE OF RcDiagPortConvSteeringEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Diag Port Conv Steering Table" ::= { rcDiag 2 } rcDiagPortConvSteeringEntry OBJECT-TYPE SYNTAX RcDiagPortConvSteeringEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing infomation of Diag Port Conv Steering." INDEX { rcDiagPortConvSteeringId } ::= { rcDiagPortConvSteeringTable 1 } RcDiagPortConvSteeringEntry ::= SEQUENCE { rcDiagPortConvSteeringId INTEGER, rcDiagPortConvSteeringPortOne INTEGER, rcDiagPortConvSteeringPortTwo INTEGER, rcDiagPortConvSteeringMode INTEGER, rcDiagPortConvSteeringForwardPort INTEGER, rcDiagPortConvSteeringEnable TruthValue, rcDiagPortConvSteeringRowStatus RowStatus } rcDiagPortConvSteeringId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Entry id." ::= { rcDiagPortConvSteeringEntry 1 } rcDiagPortConvSteeringPortOne OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "IfIndex for port one" ::= { rcDiagPortConvSteeringEntry 2 } rcDiagPortConvSteeringPortTwo OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "IfIndex for port two" ::= { rcDiagPortConvSteeringEntry 3 } rcDiagPortConvSteeringMode OBJECT-TYPE SYNTAX INTEGER { oneToTwo(1), twoToOne(2), both(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to specify the traffic flow that should be captured between ports one and two." ::= { rcDiagPortConvSteeringEntry 4 } rcDiagPortConvSteeringForwardPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "IfIndex of the port where captured traffic should be forwarded to." ::= { rcDiagPortConvSteeringEntry 5 } rcDiagPortConvSteeringEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Enable this entry." DEFVAL { true } ::= { rcDiagPortConvSteeringEntry 6 } rcDiagPortConvSteeringRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Used to create/delete entries in the rcDiagMirrorByPortTable." ::= { rcDiagPortConvSteeringEntry 7 } -- Diag Mac Conv Steering Table rcDiagMacConvSteeringTable OBJECT-TYPE SYNTAX SEQUENCE OF RcDiagMacConvSteeringEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Diag Mac Conv Steering Table" ::= { rcDiag 3 } rcDiagMacConvSteeringEntry OBJECT-TYPE SYNTAX RcDiagMacConvSteeringEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing infomation of Diag Mac Conv Steering." INDEX { rcDiagMacConvSteeringId } ::= { rcDiagMacConvSteeringTable 1 } RcDiagMacConvSteeringEntry ::= SEQUENCE { rcDiagMacConvSteeringId INTEGER, rcDiagMacConvSteeringSrcMac MacAddress, rcDiagMacConvSteeringDstMac MacAddress, rcDiagMacConvSteeringInPort INTEGER, rcDiagMacConvSteeringForwardPort INTEGER, rcDiagMacConvSteeringEnable TruthValue, rcDiagMacConvSteeringRowStatus RowStatus } rcDiagMacConvSteeringId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Entry id." ::= { rcDiagMacConvSteeringEntry 1 } rcDiagMacConvSteeringSrcMac OBJECT-TYPE SYNTAX MacAddress ACCESS read-write STATUS mandatory DESCRIPTION "Source MAC address" ::= { rcDiagMacConvSteeringEntry 2 } rcDiagMacConvSteeringDstMac OBJECT-TYPE SYNTAX MacAddress ACCESS read-write STATUS mandatory DESCRIPTION "Destination MAC address" ::= { rcDiagMacConvSteeringEntry 3 } rcDiagMacConvSteeringInPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "IfIndex of ingress port." ::= { rcDiagMacConvSteeringEntry 4 } rcDiagMacConvSteeringForwardPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "IfIndex of the port where captured traffic should be forwarded to." ::= { rcDiagMacConvSteeringEntry 5 } rcDiagMacConvSteeringEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Enable this entry." DEFVAL { true } ::= { rcDiagMacConvSteeringEntry 6 } rcDiagMacConvSteeringRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Used to create/delete entries in the rcDiagMirrorByPortTable." ::= { rcDiagMacConvSteeringEntry 7 } rcDiagSaveConfig OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to configure whether the various mirror feature settings should be saved and restored across system reboot." ::= { rcDiag 10 } rcDiagMirrorByPortTblSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate table size." ::= { rcDiag 11 } rcDiagPortConvSteeringTblSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate table size." ::= { rcDiag 12 } rcDiagMacConvSteeringTblSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate table size." ::= { rcDiag 13 } rcDiagDiagnosticsEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to enable/disable the mirroring feature for the entire device. This setting overrides any setting in the various mirroring tables." DEFVAL { false } ::= { rcDiag 14 } -- RCIPX -- IPX -- IPX Routing Enable rcIpxRoutingEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Global Ipx Routing control variable" DEFVAL { false } ::= { rcIpx 1 } -- IPX Address Table rcIpxAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpxAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of addressing information relevant to this entity's IPX addresses. This table is used for associating IfIndex and IPX network number." ::= { rcIpx 2 } rcIpxAddrEntry OBJECT-TYPE SYNTAX RcIpxAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The addressing information for one of this entity's IP addresses." INDEX { rcIpxAddrVlanId, rcIpxAddrNetAddr, rcIpxAddrEncap } ::= { rcIpxAddrTable 1 } RcIpxAddrEntry ::= SEQUENCE { rcIpxAddrVlanId INTEGER, rcIpxAddrNetAddr OCTET STRING (SIZE(4)), rcIpxAddrEncap INTEGER, rcIpxAddrEntryStatus RowStatus } rcIpxAddrVlanId OBJECT-TYPE SYNTAX INTEGER (1..4094) ACCESS read-write STATUS mandatory DESCRIPTION "The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { rcIpxAddrEntry 1 } rcIpxAddrNetAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "IPX Network address." ::= { rcIpxAddrEntry 2 } rcIpxAddrEncap OBJECT-TYPE SYNTAX INTEGER { none(0), ethernetii(1), snap(2), llc(3), raw(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Specify IPX encapsulation format. It is relevent if the VLAN is port based. But it's always nice to have it." DEFVAL { none } ::= { rcIpxAddrEntry 3 } rcIpxAddrEntryStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Used to create/delete entries in the rcIpxAddrEntry." ::= { rcIpxAddrEntry 4 } -- RCIPX -- ORNA Group rcOrnaXlr8600 OBJECT IDENTIFIER ::= { rcOrna 1 } rcOrnaXlr8600MgmtIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the ORNA (High Performance Remote Monitor) module. This is the IP address a network management station would use to contact the ORNA module." ::= { rcOrnaXlr8600 1 } rcOrnaXlr8600MgmtNetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The network mask of the ORNA module." ::= { rcOrnaXlr8600 2 } rcOrnaXlr8600MgmtGateway OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the gateway the ORNA module should use to route internetwork traffic." ::= { rcOrnaXlr8600 3 } rcOrnaXlr8600MgmtMacAddress OBJECT-TYPE SYNTAX DisplayString (SIZE (0..24)) ACCESS read-only STATUS mandatory DESCRIPTION "The MAC address of the ORNA module." ::= { rcOrnaXlr8600 4 } rcOrnaXlr8600MgmtPortActive OBJECT-TYPE SYNTAX INTEGER { inBand(1), outBand(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The active management port used by the ORNA" ::= { rcOrnaXlr8600 5 } rcOrnaXlr8600BootInfo OBJECT-TYPE SYNTAX DisplayString (SIZE(0..256)) ACCESS read-only STATUS mandatory DESCRIPTION "ORNA's boot information." ::= { rcOrnaXlr8600 6 } rcOrnaXlr8600Info OBJECT-TYPE SYNTAX DisplayString (SIZE(0..256)) ACCESS read-only STATUS mandatory DESCRIPTION "Additional general information" ::= { rcOrnaXlr8600 7 } rcOrnaXlr8600Model OBJECT-TYPE SYNTAX DisplayString (SIZE (0..24)) ACCESS read-only STATUS mandatory DESCRIPTION "ORNA model information" ::= { rcOrnaXlr8600 8 } rcOrnaXlr8600SubModel OBJECT-TYPE SYNTAX DisplayString (SIZE (0..24)) ACCESS read-only STATUS mandatory DESCRIPTION "ORNA sub-model information" ::= { rcOrnaXlr8600 9 } rcOrnaXlr8600Description OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "ORNA description information" ::= { rcOrnaXlr8600 10 } rcOrnaXlr8600PartNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..24)) ACCESS read-only STATUS mandatory DESCRIPTION "ORNA part number" ::= { rcOrnaXlr8600 11 } rcOrnaXlr8600SerialNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..24)) ACCESS read-only STATUS mandatory DESCRIPTION "ORNA serial number" ::= { rcOrnaXlr8600 12 } rcOrnaXlr8600MemorySize OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "HRPM memory size in kbytes" ::= { rcOrnaXlr8600 13 } rcOrnaXlr8600HwVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "ORNA hardware version" ::= { rcOrnaXlr8600 14 } rcOrnaXlr8600SwVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "ORNA software version." ::= { rcOrnaXlr8600 15 } rcOrnaXlr8600BootPromVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "ORNA Boot PROM version." ::= { rcOrnaXlr8600 16 } rcOrnaXlr8600OperatingSystem OBJECT-TYPE SYNTAX DisplayString (SIZE (0..24)) ACCESS read-only STATUS mandatory DESCRIPTION "ORNA operating system information." ::= { rcOrnaXlr8600 17 } rcOrnaXlr8600Action OBJECT-TYPE SYNTAX INTEGER { none(0), reset(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Action control variable." ::= { rcOrnaXlr8600 18 } rcOrnaXlr8600Result OBJECT-TYPE SYNTAX INTEGER { none(1), inProgress(2), success(3), fail(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Result of last action performed." ::= { rcOrnaXlr8600 19 } -- POS PPP IPX Table rcPosPppIpxTable OBJECT-TYPE SYNTAX SEQUENCE OF RcPosPppIpxEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { rcPos 1 } rcPosPppIpxEntry OBJECT-TYPE SYNTAX RcPosPppIpxEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { rcPosPppIpxIfIndex } ::= { rcPosPppIpxTable 1 } RcPosPppIpxEntry ::= SEQUENCE { rcPosPppIpxIfIndex InterfaceIndex, rcPosPppIpxIpxcpAdminStatus INTEGER, rcPosPppIpxOperStatus INTEGER, rcPosPppIpxNetAddr OCTET STRING (SIZE(4)), rcPosPppIpxRoutingProtocol INTEGER } rcPosPppIpxIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "port number." ::= { rcPosPppIpxEntry 1 } rcPosPppIpxIpxcpAdminStatus OBJECT-TYPE SYNTAX INTEGER { open(1), close(2) } ACCESS read-write STATUS mandatory DESCRIPTION "" DEFVAL { close } ::= { rcPosPppIpxEntry 2 } rcPosPppIpxOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), unknown(3) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { rcPosPppIpxEntry 3 } rcPosPppIpxNetAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "IPX Network address." ::= { rcPosPppIpxEntry 4 } rcPosPppIpxRoutingProtocol OBJECT-TYPE SYNTAX INTEGER { none(0), rip(2) } ACCESS read-write STATUS mandatory DESCRIPTION "" DEFVAL { none } ::= { rcPosPppIpxEntry 5 } -- POS SONET Table rcPosSonetTable OBJECT-TYPE SYNTAX SEQUENCE OF RcPosSonetEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { rcPos 2 } rcPosSonetEntry OBJECT-TYPE SYNTAX RcPosSonetEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { rcPosSonetIndex } ::= { rcPosSonetTable 1 } RcPosSonetEntry ::= SEQUENCE { rcPosSonetIndex InterfaceIndex, rcPosSonetFraming INTEGER, rcPosSonetSectionTrace INTEGER, rcPosSonetSectionGrowth INTEGER, rcPosSonetSyncronization INTEGER, rcPosSonetStsPathTrace OCTET STRING (SIZE(64)), rcPosSonetPathSignalLabel INTEGER, rcPosSonetClockSource INTEGER, rcPosSonetScramble EnableValue, rcPosSonetOperStatusFraming INTEGER, rcPosSonetOperStatusClockSource INTEGER, rcPosSonetOperStatusScramble EnableValue, rcPosSonetOperStatusSectionTrace INTEGER, rcPosSonetOperStatusPathSignalLabel INTEGER } rcPosSonetIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "pos ifIndex." ::= { rcPosSonetEntry 1 } rcPosSonetFraming OBJECT-TYPE SYNTAX INTEGER { sonet(1), sdh(2) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcPosSonetEntry 2 } rcPosSonetSectionTrace OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "config. J0 byte" ::= { rcPosSonetEntry 3 } rcPosSonetSectionGrowth OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "config. Z0 byte" ::= { rcPosSonetEntry 4 } rcPosSonetSyncronization OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "config. S1 byte" ::= { rcPosSonetEntry 5 } rcPosSonetStsPathTrace OBJECT-TYPE SYNTAX OCTET STRING (SIZE(64)) ACCESS read-write STATUS mandatory DESCRIPTION "config. 64/16 byte." ::= { rcPosSonetEntry 6 } rcPosSonetPathSignalLabel OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "config. C2 byte" ::= { rcPosSonetEntry 7 } rcPosSonetClockSource OBJECT-TYPE SYNTAX INTEGER { line(1), internal(2) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcPosSonetEntry 8 } rcPosSonetScramble OBJECT-TYPE SYNTAX EnableValue ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcPosSonetEntry 9 } rcPosSonetOperStatusFraming OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { rcPosSonetEntry 10 } rcPosSonetOperStatusClockSource OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { rcPosSonetEntry 11 } rcPosSonetOperStatusScramble OBJECT-TYPE SYNTAX EnableValue ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { rcPosSonetEntry 12 } rcPosSonetOperStatusSectionTrace OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { rcPosSonetEntry 13 } rcPosSonetOperStatusPathSignalLabel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { rcPosSonetEntry 14 } -- Pos Line Status Table rcPosLineStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF RcPosLineStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Pos Line Status Table" ::= { rcPos 3 } rcPosLineStatusEntry OBJECT-TYPE SYNTAX RcPosLineStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing infomation of Pos Line Status." INDEX { rcPosLineStatusIndex } ::= { rcPosLineStatusTable 1 } RcPosLineStatusEntry ::= SEQUENCE { rcPosLineStatusIndex InterfaceIndex, rcPosLineStatusLocalMACAddress MacAddress, rcPosLineStatusRemoteMACAddress MacAddress, rcPosLineStatusLocalIpAddr IpAddress, rcPosLineStatusRemoteIpAddr IpAddress, rcPosLineStatusOutQuality INTEGER, rcPosLineStatusLocalPeriod INTEGER, rcPosLineStatusDeviceType INTEGER, rcPosLineStatusDeviceRev INTEGER, rcPosLineStatusIpxRoutingProtocol INTEGER } rcPosLineStatusIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "pos ifIndex, same as rcPosPppIpxIfIndex." ::= { rcPosLineStatusEntry 1 } rcPosLineStatusLocalMACAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "current local MAC address" ::= { rcPosLineStatusEntry 2 } rcPosLineStatusRemoteMACAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "current remote MAC address" ::= { rcPosLineStatusEntry 3 } rcPosLineStatusLocalIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "current local ip addr" ::= { rcPosLineStatusEntry 4 } rcPosLineStatusRemoteIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "current remote ip addr" ::= { rcPosLineStatusEntry 5 } rcPosLineStatusOutQuality OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "current output quality." ::= { rcPosLineStatusEntry 6 } rcPosLineStatusLocalPeriod OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { rcPosLineStatusEntry 7 } rcPosLineStatusDeviceType OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { rcPosLineStatusEntry 8 } rcPosLineStatusDeviceRev OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { rcPosLineStatusEntry 9 } rcPosLineStatusIpxRoutingProtocol OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { rcPosLineStatusEntry 10 } -- Pos Line Config Table rcPosLineConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF RcPosLineConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Pos Line Config Table" ::= { rcPos 4 } rcPosLineConfigEntry OBJECT-TYPE SYNTAX RcPosLineConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing infomation of Pos Line Config." INDEX { rcPosLineConfigIndex } ::= { rcPosLineConfigTable 1 } RcPosLineConfigEntry ::= SEQUENCE { rcPosLineConfigIndex InterfaceIndex, rcPosLineConfigLocalMACAddress MacAddress, rcPosLineConfigRemoteMACAddress MacAddress, rcPosLineConfigLocalIpAddr IpAddress, rcPosLineConfigRemoteIpAddr IpAddress, rcPosLineConfigRemoteReportPeriod INTEGER, rcPosLineConfigLqrThreshold INTEGER, rcPosLineConfigOutQuality INTEGER, rcPosLineConfigPppStp EnableValue, rcPosLineConfigLoopBack TruthValue, rcPosLineConfigIpxVlanMacAddress MacAddress, rcPosLineConfigIpxRemoteMacAddress MacAddress } rcPosLineConfigIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "pos ifIndex, same as rcPosPppIpxIfIndex." ::= { rcPosLineConfigEntry 1 } rcPosLineConfigLocalMACAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-write STATUS mandatory DESCRIPTION "current local MAC address" ::= { rcPosLineConfigEntry 2 } rcPosLineConfigRemoteMACAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-write STATUS mandatory DESCRIPTION "current remote MAC address" ::= { rcPosLineConfigEntry 3 } rcPosLineConfigLocalIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "current local ip addr" ::= { rcPosLineConfigEntry 4 } rcPosLineConfigRemoteIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "current remote ip addr" ::= { rcPosLineConfigEntry 5 } rcPosLineConfigRemoteReportPeriod OBJECT-TYPE SYNTAX INTEGER (1..60) ACCESS read-write STATUS mandatory DESCRIPTION "config. remote report period." ::= { rcPosLineConfigEntry 6 } rcPosLineConfigLqrThreshold OBJECT-TYPE SYNTAX INTEGER (1..100) ACCESS read-write STATUS mandatory DESCRIPTION "config. input quality." ::= { rcPosLineConfigEntry 7 } rcPosLineConfigOutQuality OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "config. output quality." ::= { rcPosLineConfigEntry 8 } rcPosLineConfigPppStp OBJECT-TYPE SYNTAX EnableValue ACCESS read-write STATUS mandatory DESCRIPTION "STP PPP encoding enable T/F" ::= { rcPosLineConfigEntry 9 } rcPosLineConfigLoopBack OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "perform loop-back." ::= { rcPosLineConfigEntry 10 } rcPosLineConfigIpxVlanMacAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcPosLineConfigEntry 11 } rcPosLineConfigIpxRemoteMacAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcPosLineConfigEntry 12 } -- POS Sonet traps -- rcPosSonetTrap OBJECT IDENTIFIER ::= { rcPos 5 } rcPosSonetTrapType OBJECT-TYPE SYNTAX INTEGER { sectionAlarm(1), lineAlarm(2), pathAlarm(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate a particular type of Sonet trap." ::= { rcPosSonetTrap 1 } rcPosSonetTrapIndication OBJECT-TYPE SYNTAX INTEGER { noDefect(1), sectionLossOfSignal(2), sectionLossOfFrame(3), lineAlarmIndication(4), lineRemoteDefectIndication(5), pathLossOfPointer(6), pathAlarmIndication(7), pathRemoteDefectIndication(8), pathUnequipped(9), pathSignalLabelMismatch(10), pathTraceMismatch(11) } ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate an indication for a Sonet trap." ::= { rcPosSonetTrap 2 } -- Pos Sio Card Config Table rcPosSioCardConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF RcPosSioCardConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Pos Sio Card Config Table" ::= { rcPos 6 } rcPosSioCardConfigEntry OBJECT-TYPE SYNTAX RcPosSioCardConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing infomation of Pos Sio Card Config." INDEX { rcPosSioCardConfigSlotIndex } ::= { rcPosSioCardConfigTable 1 } RcPosSioCardConfigEntry ::= SEQUENCE { rcPosSioCardConfigSlotIndex INTEGER, rcPosSioCardConfigAction INTEGER, rcPosSioCardConfigTraceMode INTEGER, rcPosSioCardConfigImageFileName DisplayString } rcPosSioCardConfigSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "slot Index." ::= { rcPosSioCardConfigEntry 1 } rcPosSioCardConfigAction OBJECT-TYPE SYNTAX INTEGER { other(0), reset(1) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcPosSioCardConfigEntry 2 } rcPosSioCardConfigTraceMode OBJECT-TYPE SYNTAX INTEGER { other(0), traceOn(1) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rcPosSioCardConfigEntry 3 } rcPosSioCardConfigImageFileName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "POS Image file name." ::= { rcPosSioCardConfigEntry 4 } -- POS Operation Status Table rcPosOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF RcPosOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { rcPos 7 } rcPosOperStatusEntry OBJECT-TYPE SYNTAX RcPosOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { rcPosOperStatusIndex } ::= { rcPosOperStatusTable 1 } RcPosOperStatusEntry ::= SEQUENCE { rcPosOperStatusIndex InterfaceIndex, rcPosOperStatusLqrStatus INTEGER, rcPosOperStatusLineLqrThreshold INTEGER, rcPosOperStatusLinkMagicNumber INTEGER, rcPosOperStatusLinePppStp EnableValue } rcPosOperStatusIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "pos ifIndex." ::= { rcPosOperStatusEntry 1 } rcPosOperStatusLqrStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Operational status of pppLqrConfigStatus." ::= { rcPosOperStatusEntry 2 } rcPosOperStatusLineLqrThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { rcPosOperStatusEntry 3 } rcPosOperStatusLinkMagicNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { rcPosOperStatusEntry 4 } rcPosOperStatusLinePppStp OBJECT-TYPE SYNTAX EnableValue ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { rcPosOperStatusEntry 5 } -- Link Flap Detect Group rcLinkFlapDetectAutoPortDownEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to enable/disable the Link Flap Detect feature. When enabled this feature will monitor the number of times a port goes down during a certain interval. If the number exceeds a given bound the port will be forced out-of-service." ::= { rcLinkFlapDetect 1 } rcLinkFlapDetectSendTrap OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to configure whether a trap should be sent if the port is forced out-of-service." ::= { rcLinkFlapDetect 2 } rcLinkFlapDetectFrequency OBJECT-TYPE SYNTAX INTEGER (1..9999) ACCESS read-write STATUS mandatory DESCRIPTION "Used to configure the number of times the port can go down." ::= { rcLinkFlapDetect 3 } rcLinkFlapDetectInterval OBJECT-TYPE SYNTAX INTEGER (2..600) ACCESS read-write STATUS mandatory DESCRIPTION "Used to configure the interval (in minutes)." ::= { rcLinkFlapDetect 4 } -- Radius Group -- Radius Global Infomation rcRadiusGlobal OBJECT IDENTIFIER ::= { rcRadius 1 } rcRadiusGlobalEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Enable/disable this feature." DEFVAL { false } ::= { rcRadiusGlobal 1 } rcRadiusGlobalMaxNumberServer OBJECT-TYPE SYNTAX INTEGER (1..10) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum number of RADIUS servers." DEFVAL { 10 } ::= { rcRadiusGlobal 2 } rcRadiusGlobalAttributeValue OBJECT-TYPE SYNTAX INTEGER (192..240) ACCESS read-write STATUS mandatory DESCRIPTION "Integer value for Access-Priority attribute." DEFVAL { 192 } ::= { rcRadiusGlobal 3 } rcRadiusGlobalServerTableSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the number of entries in the rcRadiusServerTable." ::= { rcRadiusGlobal 4 } -- Radius Server Table Infomation rcRadiusServerTable OBJECT-TYPE SYNTAX SEQUENCE OF RcRadiusServerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The RADIUS table (0 to 10 entries). This table lists the information of the RADIUS server." ::= { rcRadius 2 } rcRadiusServerEntry OBJECT-TYPE SYNTAX RcRadiusServerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A RADIUS server table entry." INDEX { rcRadiusServerAddress} ::= { rcRadiusServerTable 1 } RcRadiusServerEntry ::= SEQUENCE { rcRadiusServerPriority INTEGER, rcRadiusServerAddress IpAddress, rcRadiusServerTimeOut INTEGER, rcRadiusServerEnable TruthValue, rcRadiusServerMaxRetries INTEGER, rcRadiusServerUdpPort INTEGER, rcRadiusServerSecretKey DisplayString, rcRadiusServerAccessRequests Counter, rcRadiusServerAccessAccepts Counter, rcRadiusServerAccessRejects Counter, rcRadiusServerBadResponses Counter, rcRadiusServerPendingRequests Counter, rcRadiusServerClientRetries Counter, rcRadiusServerRowStatus RowStatus } rcRadiusServerPriority OBJECT-TYPE SYNTAX INTEGER (1..10) ACCESS read-write STATUS mandatory DESCRIPTION "Server priority, used to control which server to choose first to send authentication." DEFVAL { 10 } ::= { rcRadiusServerEntry 1 } rcRadiusServerAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Server IP address of the RADIUS authentication server referred to in this table entry." ::= { rcRadiusServerEntry 2 } rcRadiusServerTimeOut OBJECT-TYPE SYNTAX INTEGER (1..10) ACCESS read-write STATUS mandatory DESCRIPTION "The time interval in seconds before the client retransmit the packet." DEFVAL { 3 } ::= { rcRadiusServerEntry 3 } rcRadiusServerEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable this server." DEFVAL { true } ::= { rcRadiusServerEntry 4 } rcRadiusServerMaxRetries OBJECT-TYPE SYNTAX INTEGER (1..6) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum number of retransmissions." DEFVAL { 3 } ::= { rcRadiusServerEntry 5 } rcRadiusServerUdpPort OBJECT-TYPE SYNTAX INTEGER (1..65536) ACCESS read-write STATUS mandatory DESCRIPTION "The UDP port the client is using to send requests to this server." DEFVAL { 1812 } ::= { rcRadiusServerEntry 6 } rcRadiusServerSecretKey OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "The identifier of the RADIUS authentication client." ::= { rcRadiusServerEntry 7 } rcRadiusServerAccessRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of RADIUS access-response packets sent to this server. This does not include retransmissions." ::= { rcRadiusServerEntry 8 } rcRadiusServerAccessAccepts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of RADIUS access-accept packets (valid or invalid) received from this server." ::= { rcRadiusServerEntry 9 } rcRadiusServerAccessRejects OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of RADIUS access-reject packets (valid or invalid) received from this server." ::= { rcRadiusServerEntry 10 } rcRadiusServerBadResponses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of RADIUS invalid access-response packets received from this server." ::= { rcRadiusServerEntry 11 } rcRadiusServerPendingRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of RADIUS access-request packets destined for this server that have not yet timed out or received a response. This variable is incremented when an access-request is sent and decremented due to receipt of an access-accept, access-reject, a timeout or retransmission." ::= { rcRadiusServerEntry 12 } rcRadiusServerClientRetries OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of authentication retransmission to this server." ::= { rcRadiusServerEntry 13 } rcRadiusServerRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Used to create/delete entries." ::= { rcRadiusServerEntry 14 } -- IGMP rcIgmpInterfaceExtnTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIgmpInterfaceExtnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { rcIgmp 1 } rcIgmpInterfaceExtnEntry OBJECT-TYPE SYNTAX RcIgmpInterfaceExtnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { rcIgmpInterfaceExtnIfIndex } ::= { rcIgmpInterfaceExtnTable 1 } RcIgmpInterfaceExtnEntry ::= SEQUENCE { rcIgmpInterfaceExtnIfIndex InterfaceIndex, rcIgmpInterfaceExtnSnoopEnable TruthValue, rcIgmpInterfaceExtnProxySnoopEnable TruthValue, rcIgmpInterfaceExtnMaxAdvertiseInterval INTEGER, rcIgmpInterfaceExtnMinAdvertiseInterval INTEGER, rcIgmpInterfaceExtnMaxInitialAdvertiseInterval INTEGER, rcIgmpInterfaceExtnMaxInitialAdvertments INTEGER, rcIgmpInterfaceExtnNeighborDeadInterval INTEGER, rcIgmpInterfaceExtnFastLeaveEnable TruthValue, rcIgmpInterfaceExtnFastLeavePortMembers PortSet, rcIgmpInterfaceExtnMrdiscEnable TruthValue, rcIgmpInterfaceExtnDiscoveredRouterPorts PortSet, rcIgmpInterfaceExtnSnoopMRouterPorts PortSet, rcIgmpInterfaceExtnSnoopActiveMRouterPorts PortSet, rcIgmpInterfaceExtnSnoopMRouterExpiration INTEGER, rcIgmpInterfaceExtnFlushAction INTEGER } rcIgmpInterfaceExtnIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "ifindex." ::= { rcIgmpInterfaceExtnEntry 1 } rcIgmpInterfaceExtnSnoopEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "enable snoop." ::= { rcIgmpInterfaceExtnEntry 2 } rcIgmpInterfaceExtnProxySnoopEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "enable proxy snoop." ::= { rcIgmpInterfaceExtnEntry 3 } rcIgmpInterfaceExtnMaxAdvertiseInterval OBJECT-TYPE SYNTAX INTEGER(2..180) ACCESS read-write STATUS mandatory DESCRIPTION "" DEFVAL { 20 } ::= { rcIgmpInterfaceExtnEntry 4 } rcIgmpInterfaceExtnMinAdvertiseInterval OBJECT-TYPE SYNTAX INTEGER(3..180) ACCESS read-write STATUS mandatory DESCRIPTION "" DEFVAL { 15 } ::= { rcIgmpInterfaceExtnEntry 5 } rcIgmpInterfaceExtnMaxInitialAdvertiseInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" DEFVAL { 2 } ::= { rcIgmpInterfaceExtnEntry 6 } rcIgmpInterfaceExtnMaxInitialAdvertments OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" DEFVAL { 3 } ::= { rcIgmpInterfaceExtnEntry 7 } rcIgmpInterfaceExtnNeighborDeadInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "" DEFVAL { 60 } ::= { rcIgmpInterfaceExtnEntry 8 } rcIgmpInterfaceExtnFastLeaveEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Enable fast leave on this interface." DEFVAL { false } ::= { rcIgmpInterfaceExtnEntry 9 } rcIgmpInterfaceExtnFastLeavePortMembers OBJECT-TYPE SYNTAX PortSet ACCESS read-write STATUS mandatory DESCRIPTION "The set of ports that are enabled for fast leave." ::= { rcIgmpInterfaceExtnEntry 10 } rcIgmpInterfaceExtnMrdiscEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Enable/disable multicast router discovery." ::= { rcIgmpInterfaceExtnEntry 11 } rcIgmpInterfaceExtnDiscoveredRouterPorts OBJECT-TYPE SYNTAX PortSet ACCESS read-only STATUS mandatory DESCRIPTION "list of ports that discovered by IGMP Multicast router discovery (MRDISC) protocol." ::= { rcIgmpInterfaceExtnEntry 12 } rcIgmpInterfaceExtnSnoopMRouterPorts OBJECT-TYPE SYNTAX PortSet ACCESS read-write STATUS mandatory DESCRIPTION "The set of ports in this interface that provide connectivity to an IP Multicast router." ::= { rcIgmpInterfaceExtnEntry 13 } rcIgmpInterfaceExtnSnoopActiveMRouterPorts OBJECT-TYPE SYNTAX PortSet ACCESS read-only STATUS mandatory DESCRIPTION "Active ports." ::= { rcIgmpInterfaceExtnEntry 14 } rcIgmpInterfaceExtnSnoopMRouterExpiration OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Multicast querier router aging time out." ::= { rcIgmpInterfaceExtnEntry 15 } rcIgmpInterfaceExtnFlushAction OBJECT-TYPE SYNTAX INTEGER { none(1), flushGrpMember(2), flushMrouter(3), flushSender(4) } ACCESS read-write STATUS mandatory DESCRIPTION "IGMP flush action." ::= { rcIgmpInterfaceExtnEntry 16 } -- IGMP Static rcIgmpStaticTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIgmpStaticEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { rcIgmp 2 } rcIgmpStaticEntry OBJECT-TYPE SYNTAX RcIgmpStaticEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { rcIgmpStaticIfIndex, rcIgmpStaticGrpAddr } ::= { rcIgmpStaticTable 1 } RcIgmpStaticEntry ::= SEQUENCE { rcIgmpStaticIfIndex InterfaceIndex, rcIgmpStaticGrpAddr IpAddress, rcIgmpStaticMemberPorts PortSet, rcIgmpStaticNotAllowedToJoin PortSet, rcIgmpStaticRowStatus RowStatus } rcIgmpStaticIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "ifindex" ::= { rcIgmpStaticEntry 1 } rcIgmpStaticGrpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "ip multicast addr." ::= { rcIgmpStaticEntry 2 } rcIgmpStaticMemberPorts OBJECT-TYPE SYNTAX PortSet ACCESS read-write STATUS mandatory DESCRIPTION "egressing ports." ::= { rcIgmpStaticEntry 3 } rcIgmpStaticNotAllowedToJoin OBJECT-TYPE SYNTAX PortSet ACCESS read-write STATUS mandatory DESCRIPTION "not allowed to join." ::= { rcIgmpStaticEntry 4 } rcIgmpStaticRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Used to create/delete entries in the rcIgmpStaticEntry." ::= { rcIgmpStaticEntry 5 } -- IGMP Access rcIgmpAccessTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIgmpAccessEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { rcIgmp 3 } rcIgmpAccessEntry OBJECT-TYPE SYNTAX RcIgmpAccessEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { rcIgmpAccessIfIndex, rcIgmpAccessGrpAddr, rcIgmpAccessHostAddr, rcIgmpAccessHostMask } ::= { rcIgmpAccessTable 1 } RcIgmpAccessEntry ::= SEQUENCE { rcIgmpAccessIfIndex InterfaceIndex, rcIgmpAccessGrpAddr IpAddress, rcIgmpAccessHostAddr IpAddress, rcIgmpAccessMode INTEGER, rcIgmpAccessRowStatus RowStatus, rcIgmpAccessHostMask IpAddress } rcIgmpAccessIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "ifindex" ::= { rcIgmpAccessEntry 1 } rcIgmpAccessGrpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "ip multicast addr." ::= { rcIgmpAccessEntry 2 } rcIgmpAccessHostAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "host addr." ::= { rcIgmpAccessEntry 3 } rcIgmpAccessMode OBJECT-TYPE SYNTAX INTEGER { tx(1), rx(2), both(3) } ACCESS read-write STATUS mandatory DESCRIPTION "tx(1), rx(2), both(3)." DEFVAL { both } ::= { rcIgmpAccessEntry 4 } rcIgmpAccessRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Used to create/delete entries in the rcIgmpAccessEntry." ::= { rcIgmpAccessEntry 5 } rcIgmpAccessHostMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "host mask." ::= { rcIgmpAccessEntry 6 } -- IGMP Sender rcIgmpSenderTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIgmpSenderEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { rcIgmp 4 } rcIgmpSenderEntry OBJECT-TYPE SYNTAX RcIgmpSenderEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { rcIgmpSenderGrpAddr, rcIgmpSenderIfIndex, rcIgmpSenderMemberAddr } ::= { rcIgmpSenderTable 1 } RcIgmpSenderEntry ::= SEQUENCE { rcIgmpSenderGrpAddr IpAddress, rcIgmpSenderIfIndex InterfaceIndex, rcIgmpSenderMemberAddr IpAddress, rcIgmpSenderAction INTEGER, rcIgmpSenderTPort INTEGER } rcIgmpSenderGrpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "ip multicast addr." ::= { rcIgmpSenderEntry 1 } rcIgmpSenderIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "ifindex" ::= { rcIgmpSenderEntry 2 } rcIgmpSenderMemberAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "host addr." ::= { rcIgmpSenderEntry 3 } rcIgmpSenderAction OBJECT-TYPE SYNTAX INTEGER { none(0), flushEntry(1), flushGrp(2) } ACCESS read-write STATUS mandatory DESCRIPTION "none(0), flushEntry(1), flushGrp(2)." ::= { rcIgmpSenderEntry 4 } rcIgmpSenderTPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Igmp Sender Tport." ::= { rcIgmpSenderEntry 5 } -- System Time Grp rcUserSetTimeYear OBJECT-TYPE SYNTAX INTEGER (1998..2097) ACCESS read-write STATUS mandatory DESCRIPTION "Year of the time." DEFVAL {1998} ::= { rcUserSetTime 1 } rcUserSetTimeMonth OBJECT-TYPE SYNTAX INTEGER (1..12) ACCESS read-write STATUS mandatory DESCRIPTION "Month of the time." DEFVAL {1} ::= { rcUserSetTime 2 } rcUserSetTimeDate OBJECT-TYPE SYNTAX INTEGER (1..31) ACCESS read-write STATUS mandatory DESCRIPTION "Date of the time." DEFVAL {1} ::= { rcUserSetTime 3 } rcUserSetTimeHour OBJECT-TYPE SYNTAX INTEGER (0..23) ACCESS read-write STATUS mandatory DESCRIPTION "Hour of the time." DEFVAL {0} ::= { rcUserSetTime 4 } rcUserSetTimeMinute OBJECT-TYPE SYNTAX INTEGER (0..59) ACCESS read-write STATUS mandatory DESCRIPTION "Minute of the time." DEFVAL {0} ::= { rcUserSetTime 5 } rcUserSetTimeSecond OBJECT-TYPE SYNTAX INTEGER (0..59) ACCESS read-write STATUS mandatory DESCRIPTION "Second of the time." DEFVAL {0} ::= { rcUserSetTime 6 } -- rc2k Group rc2kChassis OBJECT IDENTIFIER ::= { rc2k 1 } rc2kChassisPortOperStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE(256)) ACCESS read-only STATUS mandatory DESCRIPTION "A bit array that contains the oper-status of the ports in the device. 2 bits are used for each port. The high order 2 bits of the first octet represent port #0, the next two bits are used for port #1, etc. The status is encoded with the following scheme : value meaning ----- ------- 0 no-link (admin=up, oper=down) 1 up (admin=up, oper=up) 2 down (admin=down, oper=down) 3 testing (admin=test, oper=test) " ::= { rc2kChassis 1 } rc2kChassisTemperature OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the core operating temperature of the chassis. This value represents the degree in celsius of the air inside the chassis." ::= { rc2kChassis 2 } rc2kChassisAmbientLowerTemperature OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS obsolete DESCRIPTION "Used to indicate the temperature of the air entering the fan at the lower half of the chassis." ::= { rc2kChassis 3 } rc2kChassisAmbientUpperTemperature OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS obsolete DESCRIPTION "Used to indicate the temperature of the air entering the fan at the upper half of the chassis." ::= { rc2kChassis 4 } rc2kChassisBaseMacAddr OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "base mac addr" ::= { rc2kChassis 5 } -- 2k CPU Ethernet Port table rc2kCpuEthernetPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Rc2kCpuEthernetPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "2k CPU Ethernet Port table" ::= { rc2k 2 } rc2kCpuEthernetPortEntry OBJECT-TYPE SYNTAX Rc2kCpuEthernetPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing infomation of 2k CPU Ethernet Port" INDEX { rc2kCpuEthernetPortIfIndex } ::= { rc2kCpuEthernetPortTable 1 } Rc2kCpuEthernetPortEntry ::= SEQUENCE { rc2kCpuEthernetPortIfIndex InterfaceIndex, rc2kCpuEthernetPortDescr DisplayString, rc2kCpuEthernetPortAdminStatus INTEGER, rc2kCpuEthernetPortOperStatus INTEGER, rc2kCpuEthernetPortAddr IpAddress, rc2kCpuEthernetPortMask IpAddress, rc2kCpuEthernetPortGateway IpAddress, rc2kCpuEthernetPortNetwork IpAddress, rc2kCpuEthernetPortAutoNegotiate TruthValue, rc2kCpuEthernetPortAdminDuplex INTEGER, rc2kCpuEthernetPortOperDuplex INTEGER, rc2kCpuEthernetPortAdminSpeed INTEGER, rc2kCpuEthernetPortOperSpeed INTEGER, rc2kCpuEthernetPortEnableBootp TruthValue, rc2kCpuEthernetPortMgmtMacAddr MacAddress } rc2kCpuEthernetPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "IfIndex of the port." ::= { rc2kCpuEthernetPortEntry 1 } rc2kCpuEthernetPortDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) ACCESS read-only STATUS mandatory DESCRIPTION "Port description" ::= { rc2kCpuEthernetPortEntry 2 } rc2kCpuEthernetPortAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), unknown(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to configure the admininstrative status of the port." ::= { rc2kCpuEthernetPortEntry 3 } rc2kCpuEthernetPortOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), unknown(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the administrative status of the port." ::= { rc2kCpuEthernetPortEntry 4 } rc2kCpuEthernetPortAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Used to configure the port's IP address" ::= { rc2kCpuEthernetPortEntry 5 } rc2kCpuEthernetPortMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Used to configure the port's net mask" ::= { rc2kCpuEthernetPortEntry 6 } rc2kCpuEthernetPortGateway OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Used to configure the the IP address of the gateway that should be used to forward IP traffic." ::= { rc2kCpuEthernetPortEntry 7 } rc2kCpuEthernetPortNetwork OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Used to configure the network that can be used to remotely manage this device." ::= { rc2kCpuEthernetPortEntry 8 } rc2kCpuEthernetPortAutoNegotiate OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to configure auto-negotiation on this port." DEFVAL { true } ::= { rc2kCpuEthernetPortEntry 9 } rc2kCpuEthernetPortAdminDuplex OBJECT-TYPE SYNTAX INTEGER { half(1), full(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to configure the administrative duplex setting for this port." ::= { rc2kCpuEthernetPortEntry 10 } rc2kCpuEthernetPortOperDuplex OBJECT-TYPE SYNTAX INTEGER { half(1), full(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the operational duplex setting for this port." ::= { rc2kCpuEthernetPortEntry 11 } rc2kCpuEthernetPortAdminSpeed OBJECT-TYPE SYNTAX INTEGER { none(0), mbps10(1), -- 10Mb/s mbps100(2) -- 100Mb/s } ACCESS read-write STATUS mandatory DESCRIPTION "Used to configure the administrative speed setting for this port." ::= { rc2kCpuEthernetPortEntry 12 } rc2kCpuEthernetPortOperSpeed OBJECT-TYPE SYNTAX INTEGER { none(0), mbps10(1), -- 10Mb/s mbps100(2) -- 100Mb/s } ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the operational duplex setting for this port." ::= { rc2kCpuEthernetPortEntry 13 } rc2kCpuEthernetPortEnableBootp OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to enable/disable the Bootp feature on this port." DEFVAL { false } ::= { rc2kCpuEthernetPortEntry 14 } rc2kCpuEthernetPortMgmtMacAddr OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the mac addr for this port." ::= { rc2kCpuEthernetPortEntry 15 } -- 2k CPU Serial Port table rc2kCpuSerialPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Rc2kCpuSerialPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "2k CPU Serial Port table" ::= { rc2k 3 } rc2kCpuSerialPortEntry OBJECT-TYPE SYNTAX Rc2kCpuSerialPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing infomation of 2k CPU Serial Port" INDEX { rc2kCpuSerialPortIfIndex } ::= { rc2kCpuSerialPortTable 1 } Rc2kCpuSerialPortEntry ::= SEQUENCE { rc2kCpuSerialPortIfIndex InterfaceIndex, rc2kCpuSerialPortDescr DisplayString, rc2kCpuSerialPortMode INTEGER, rc2kCpuSerialPortAdminStatus INTEGER, rc2kCpuSerialPortOperStatus INTEGER, rc2kCpuSerialPortBaudRate INTEGER, rc2kCpuSerialPortDataBits INTEGER, rc2kCpuSerialPortMyAddr IpAddress, rc2kCpuSerialPortPeerAddr IpAddress, rc2kCpuSerialPortSlipMtu INTEGER, rc2kCpuSerialPortSlipTxRxCompress TruthValue, rc2kCpuSerialPortSlipRxCompress TruthValue, rc2kCpuSerialPortPppConfigFile DisplayString } rc2kCpuSerialPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "IfIndex for this port." ::= { rc2kCpuSerialPortEntry 1 } rc2kCpuSerialPortDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) ACCESS read-only STATUS mandatory DESCRIPTION "Port description." ::= { rc2kCpuSerialPortEntry 2 } rc2kCpuSerialPortMode OBJECT-TYPE SYNTAX INTEGER { cli(1), slip(2), ppp(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to configure the mode this port should operate in." ::= { rc2kCpuSerialPortEntry 3 } rc2kCpuSerialPortAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), unknown(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to configure the administrative status setting for this port." ::= { rc2kCpuSerialPortEntry 4 } rc2kCpuSerialPortOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), unknown(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the operational status setting for this port." ::= { rc2kCpuSerialPortEntry 5 } rc2kCpuSerialPortBaudRate OBJECT-TYPE SYNTAX INTEGER { baud2400(2400), baud4800(4800), baud9600(9600), baud19200(19200), baud38400(38400), baud57600(57600), baud115200(115200) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to configure the baud rate of this port." ::= { rc2kCpuSerialPortEntry 6 } rc2kCpuSerialPortDataBits OBJECT-TYPE SYNTAX INTEGER { seven(1), eight(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to configure the number of data bits, per byte of data, this port should send/receive." ::= { rc2kCpuSerialPortEntry 7 } rc2kCpuSerialPortMyAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Used to configure this port's IP address. Used for both 'slip' and 'ppp' modes." ::= { rc2kCpuSerialPortEntry 8 } rc2kCpuSerialPortPeerAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Used to configure the peer's IP address. Used for both 'slip' and 'ppp' modes." ::= { rc2kCpuSerialPortEntry 9 } rc2kCpuSerialPortSlipMtu OBJECT-TYPE SYNTAX INTEGER (0..224) ACCESS read-write STATUS mandatory DESCRIPTION "Used to configure the MTU for this port. Used for slip only." ::= { rc2kCpuSerialPortEntry 10 } rc2kCpuSerialPortSlipTxRxCompress OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to enable/disable compression of TCP/IP packet headers on this port. Used for slip only." DEFVAL { true } ::= { rc2kCpuSerialPortEntry 11 } rc2kCpuSerialPortSlipRxCompress OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to enable/disable compression for receiving packets on this port. Used for slip only." DEFVAL { true } ::= { rc2kCpuSerialPortEntry 12 } rc2kCpuSerialPortPppConfigFile OBJECT-TYPE SYNTAX DisplayString (SIZE(256)) ACCESS read-write STATUS mandatory DESCRIPTION "Used to configure the configuration file to use for PPP." ::= { rc2kCpuSerialPortEntry 13 } -- 2k Device Group rc2kDevice OBJECT IDENTIFIER ::= { rc2k 4 } rc2kDeviceGlobalTable OBJECT-TYPE SYNTAX SEQUENCE OF Rc2kDeviceGlobalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "2k CPU Ethernet Port table" ::= { rc2kDevice 1 } rc2kDeviceGlobalEntry OBJECT-TYPE SYNTAX Rc2kDeviceGlobalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing infomation of 2k CPU Ethernet Port" INDEX { rc2kDeviceGlobalSlot } ::= { rc2kDeviceGlobalTable 1 } Rc2kDeviceGlobalEntry ::= SEQUENCE { rc2kDeviceGlobalSlot INTEGER, rc2kDeviceGlobalFlashBytesUsed INTEGER, rc2kDeviceGlobalFlashBytesFree INTEGER, rc2kDeviceGlobalFlashNumFiles INTEGER, rc2kDeviceGlobalPcmciaBytesUsed INTEGER, rc2kDeviceGlobalPcmciaBytesFree INTEGER, rc2kDeviceGlobalPcmciaNumFiles INTEGER, rc2kDeviceGlobalAction INTEGER, rc2kDeviceGlobalResult INTEGER } rc2kDeviceGlobalSlot OBJECT-TYPE SYNTAX INTEGER (5..6) ACCESS read-only STATUS mandatory DESCRIPTION "slot number" ::= { rc2kDeviceGlobalEntry 1 } rc2kDeviceGlobalFlashBytesUsed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "bytes used" ::= { rc2kDeviceGlobalEntry 2 } rc2kDeviceGlobalFlashBytesFree OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "bytes free" ::= { rc2kDeviceGlobalEntry 3 } rc2kDeviceGlobalFlashNumFiles OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "# files in flash" ::= { rc2kDeviceGlobalEntry 4 } rc2kDeviceGlobalPcmciaBytesUsed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "bytes used" ::= { rc2kDeviceGlobalEntry 5 } rc2kDeviceGlobalPcmciaBytesFree OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "bytes free" ::= { rc2kDeviceGlobalEntry 6 } rc2kDeviceGlobalPcmciaNumFiles OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "# files in pcmcia" ::= { rc2kDeviceGlobalEntry 7 } rc2kDeviceGlobalAction OBJECT-TYPE SYNTAX INTEGER { none(1), resetPcmcia(2) } ACCESS read-write STATUS mandatory DESCRIPTION "none(1), resetPcmcia(2), .." ::= { rc2kDeviceGlobalEntry 8 } rc2kDeviceGlobalResult OBJECT-TYPE SYNTAX INTEGER { none(1), inProgress(2), success(3), fail(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the result of the last action performed on one of the system's device." ::= { rc2kDeviceGlobalEntry 9 } -- 2k Device Separator1 rc2kDeviceSeparator1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This leaf is used to provide a separation between tables. No meaningful information is stored in this variable." ::= { rc2kDevice 2 } -- 2k Device Flash File table rc2kDeviceFlashFileTable OBJECT-TYPE SYNTAX SEQUENCE OF Rc2kDeviceFlashFileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "2k Flash table" ::= { rc2kDevice 3 } rc2kDeviceFlashFileEntry OBJECT-TYPE SYNTAX Rc2kDeviceFlashFileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing infomation of 2k CPU Serial Port" INDEX { rc2kDeviceFlashFileSlot, rc2kDeviceFlashFileName } ::= { rc2kDeviceFlashFileTable 1 } Rc2kDeviceFlashFileEntry ::= SEQUENCE { rc2kDeviceFlashFileSlot INTEGER, rc2kDeviceFlashFileName DisplayString, rc2kDeviceFlashFileDate DisplayString, rc2kDeviceFlashFileSize INTEGER } rc2kDeviceFlashFileSlot OBJECT-TYPE SYNTAX INTEGER (5..6) ACCESS read-only STATUS mandatory DESCRIPTION "slot number" ::= { rc2kDeviceFlashFileEntry 1 } rc2kDeviceFlashFileName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "name of file" ::= { rc2kDeviceFlashFileEntry 2 } rc2kDeviceFlashFileDate OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "date" ::= { rc2kDeviceFlashFileEntry 3 } rc2kDeviceFlashFileSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "size in bytes" ::= { rc2kDeviceFlashFileEntry 4 } -- 2k Device Pcmcia present rc2kDevicePcmciaPresent OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "pcmcia is a slower device. This leaf is used to stop the access into pcmcia file table when it got the end of flash file table." ::= { rc2kDevice 4 } -- 2k Device Pcmcia File table rc2kDevicePcmciaFileTable OBJECT-TYPE SYNTAX SEQUENCE OF Rc2kDevicePcmciaFileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "2k PCMCIA table" ::= { rc2kDevice 5 } rc2kDevicePcmciaFileEntry OBJECT-TYPE SYNTAX Rc2kDevicePcmciaFileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing infomation of 2k CPU Serial Port" INDEX { rc2kDevicePcmciaFileSlot, rc2kDevicePcmciaFileName } ::= { rc2kDevicePcmciaFileTable 1 } Rc2kDevicePcmciaFileEntry ::= SEQUENCE { rc2kDevicePcmciaFileSlot INTEGER, rc2kDevicePcmciaFileName DisplayString, rc2kDevicePcmciaFileDate DisplayString, rc2kDevicePcmciaFileSize INTEGER } rc2kDevicePcmciaFileSlot OBJECT-TYPE SYNTAX INTEGER (5..6) ACCESS read-only STATUS mandatory DESCRIPTION "slot number" ::= { rc2kDevicePcmciaFileEntry 1 } rc2kDevicePcmciaFileName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "name of file" ::= { rc2kDevicePcmciaFileEntry 2 } rc2kDevicePcmciaFileDate OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "date" ::= { rc2kDevicePcmciaFileEntry 3 } rc2kDevicePcmciaFileSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "size in bytes" ::= { rc2kDevicePcmciaFileEntry 4 } -- 2k Device Separator2 rc2kDeviceSeparator2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This leaf is used to provide a separation between tables. No meaningful information is stored in this variable." ::= { rc2kDevice 6 } -- 2k Boot Config Table rc2kBootConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Rc2kBootConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "2k Boot Configuration table" ::= { rc2k 5 } rc2kBootConfigEntry OBJECT-TYPE SYNTAX Rc2kBootConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing boot configuration information." INDEX { rc2kBootConfigSlot } ::= { rc2kBootConfigTable 1 } Rc2kBootConfigEntry ::= SEQUENCE { rc2kBootConfigSlot INTEGER, rc2kBootConfigLastBootConfigSource DisplayString, rc2kBootConfigLastRuntimeImageSource DisplayString, rc2kBootConfigLastRuntimeConfigSource DisplayString, rc2kBootConfigPrimaryImageSource DisplayString, rc2kBootConfigPrimaryConfigSource DisplayString, rc2kBootConfigSecondaryImageSource DisplayString, rc2kBootConfigSecondaryConfigSource DisplayString, rc2kBootConfigTertiaryImageSource DisplayString, rc2kBootConfigTertiaryConfigSource DisplayString, rc2kBootConfigEnableAutoBoot TruthValue, rc2kBootConfigEnableFactoryDefaults TruthValue, rc2kBootConfigEnableDebugMode TruthValue, rc2kBootConfigEnableHwWatchDogTimer TruthValue, rc2kBootConfigEnableRebootOnError TruthValue, rc2kBootConfigEnableTelnetServer TruthValue, rc2kBootConfigEnableRloginServer TruthValue, rc2kBootConfigEnableFtpServer TruthValue, rc2kBootConfigEnableTftpServer TruthValue, rc2kBootConfigSwVersion DisplayString, rc2kBootConfigMulticastConfigProfile INTEGER } rc2kBootConfigSlot OBJECT-TYPE SYNTAX INTEGER (3..6) ACCESS read-only STATUS mandatory DESCRIPTION "slot number, 3 is for tatto, 4 is not valid" ::= { rc2kBootConfigEntry 1 } rc2kBootConfigLastBootConfigSource OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "boot config source" ::= { rc2kBootConfigEntry 2 } rc2kBootConfigLastRuntimeImageSource OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "runtime image source" ::= { rc2kBootConfigEntry 3 } rc2kBootConfigLastRuntimeConfigSource OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "runtime config source" ::= { rc2kBootConfigEntry 4 } rc2kBootConfigPrimaryImageSource OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) ACCESS read-write STATUS mandatory DESCRIPTION "image source" ::= { rc2kBootConfigEntry 5 } rc2kBootConfigPrimaryConfigSource OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) ACCESS read-write STATUS mandatory DESCRIPTION "config source" ::= { rc2kBootConfigEntry 6 } rc2kBootConfigSecondaryImageSource OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) ACCESS read-write STATUS mandatory DESCRIPTION "image source" ::= { rc2kBootConfigEntry 7 } rc2kBootConfigSecondaryConfigSource OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) ACCESS read-write STATUS mandatory DESCRIPTION "config source" ::= { rc2kBootConfigEntry 8 } rc2kBootConfigTertiaryImageSource OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) ACCESS read-write STATUS mandatory DESCRIPTION "image source" ::= { rc2kBootConfigEntry 9 } rc2kBootConfigTertiaryConfigSource OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) ACCESS read-write STATUS mandatory DESCRIPTION "config source" ::= { rc2kBootConfigEntry 10 } rc2kBootConfigEnableAutoBoot OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "auto boot mode" ::= { rc2kBootConfigEntry 11 } rc2kBootConfigEnableFactoryDefaults OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "use factory default" ::= { rc2kBootConfigEntry 12 } rc2kBootConfigEnableDebugMode OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "debug mode" ::= { rc2kBootConfigEntry 13 } rc2kBootConfigEnableHwWatchDogTimer OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "hw watch dog timer" ::= { rc2kBootConfigEntry 14 } rc2kBootConfigEnableRebootOnError OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "reboot on error" ::= { rc2kBootConfigEntry 15 } rc2kBootConfigEnableTelnetServer OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "telnet server" ::= { rc2kBootConfigEntry 16 } rc2kBootConfigEnableRloginServer OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "rlogin server" ::= { rc2kBootConfigEntry 17 } rc2kBootConfigEnableFtpServer OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "ftp server" ::= { rc2kBootConfigEntry 18 } rc2kBootConfigEnableTftpServer OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "tftp server" ::= { rc2kBootConfigEntry 19 } rc2kBootConfigSwVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "current sw version" ::= { rc2kBootConfigEntry 20 } rc2kBootConfigMulticastConfigProfile OBJECT-TYPE SYNTAX INTEGER (1..6) ACCESS read-only STATUS mandatory DESCRIPTION "multicast config" DEFVAL { 1 } ::= { rc2kBootConfigEntry 21 } -- 2k Card table rc2kCardTable OBJECT-TYPE SYNTAX SEQUENCE OF Rc2kCardEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "2k Card table" ::= { rc2k 6 } rc2kCardEntry OBJECT-TYPE SYNTAX Rc2kCardEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing information of 2k Card" INDEX { rc2kCardIndex } ::= { rc2kCardTable 1 } Rc2kCardEntry ::= SEQUENCE { rc2kCardIndex INTEGER, rc2kCardFrontType INTEGER, rc2kCardFrontDescription DisplayString, rc2kCardFrontAdminStatus INTEGER, rc2kCardFrontOperStatus INTEGER, rc2kCardFrontSerialNum DisplayString, rc2kCardFrontHwVersion DisplayString, rc2kCardFrontPartNumber DisplayString, rc2kCardFrontDateCode DisplayString, rc2kCardFrontDeviations DisplayString, rc2kCardFrontMacAddr MacAddress, --excluded rc2kCardBackType INTEGER, rc2kCardBackDescription DisplayString, rc2kCardBackSerialNum DisplayString, rc2kCardBackHwVersion DisplayString, rc2kCardBackPartNumber DisplayString, rc2kCardBackDateCode DisplayString, rc2kCardBackDeviations DisplayString, rc2kCardPCMCIAType INTEGER, rc2kCardPCMCIADescr DisplayString, rc2kCardASICDescr DisplayString, rc2kCardFrontMasterIO TruthValue } rc2kCardIndex OBJECT-TYPE SYNTAX INTEGER (1..10) ACCESS read-only STATUS mandatory DESCRIPTION "slot number." ::= { rc2kCardEntry 1 } rc2kCardFrontType OBJECT-TYPE SYNTAX INTEGER { other(1), -- no card installed rc2kCPU(537788672), -- 0010 0000 0000 1110 0000 0001 0000 0000 rc2k48x100BaseTX(539033904), -- 0010 0000 0010 0001 0000 0001 0011 0000 rc2k24x100BaseTX(539033880), -- 0010 0000 0010 0001 0000 0001 0001 1000 rc2k32x100BaseTX(539033888), -- 0010 0000 0010 0001 0000 0001 0010 0000 rc2k8x1000BaseT(539099400), -- 0010 0000 0010 0010 0000 0001 0000 1000 rc2k24x100BaseFX(540082456), -- 0010 0000 0011 0001 0000 0001 0001 1000 rc2k8x1000BaseSXBB(540147976), -- 0010 0000 0011 0010 0000 0001 0000 1000 rc2k16x1000BaseSXBB(540147984), -- 0010 0000 0011 0010 0000 0001 0001 0000 rc2k8x1000BaseLXBB(540156168), -- 0010 0000 0011 0010 0010 0001 0000 1000 rc2k8x1000BaseXDBB(540164360), -- 0010 0000 0011 0010 0100 0001 0000 1000 rc2k8x1000BaseIC(540168456), -- 0010 0000 0011 0010 0101 0001 0000 1000 rc2k16x1000BaseIC(540168464), -- 0010 0000 0011 0010 0101 0001 0001 0000 rc2k8x1000BaseSXRBB(540180744), -- 0010 0000 0011 0010 1000 0001 0000 1000 rc2k8x1000BaseLXRBB(540188936), -- 0010 0000 0011 0010 1010 0001 0000 1000 rc2k8xOC3(541327624), -- 0010 0000 0100 0100 0000 0001 0000 1000 rc2k2xOC12(541393154), -- 0010 0000 0100 0101 0000 0001 0000 0010 rc2k6xPOS(541401350), -- 0010 0000 0100 0101 0010 0001 0000 0110 rc2k4xATM(542441732), -- 0010 0000 0101 0101 0000 0001 0000 0100 rc2k8xATM(542441736), -- 0010 0000 0101 0101 0000 0001 0000 1000 rc2kRMON(545128704), -- 0010 0000 0111 1110 0000 0001 0000 0000 rc2kMg48x100BaseTX(807469360), -- 0011 0000 0010 0001 0000 0001 0011 0000 rc2kMg32x100BaseTX(807473440), -- 0011 0000 0010 0001 0001 0001 0010 0000 rc2kMg16x100BaseFX(808522000), -- 0011 0000 0011 0001 0001 0001 0001 0000 rc2kMg8x1000BaseTX(808583432), -- 0011 0000 0011 0010 0000 0001 0000 1000 rc2kMg8x1000BaseIC(808603912), -- 0011 0000 0011 0010 0101 0001 0000 1000 rc2kMg48x100BaseTC(817955120) -- 0011 0000 1100 0001 0000 0001 0011 0000 } ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate card types in the Accelar 8000 product families. For Accelar 8000 devices, all cards use an encoded value according to the following rule: +------+-------+-------+-------+------------+------+------+------+ bits : |31-28 | 27-20 | 19-16 | 15 | 14-12 | 11-8 | 7-0 | +------+-------+-------+-------+----+-------+------+------+------+ field : | a | c | d | e | f | g | h | +------+-------+-------+-------+----+-------+------+------+------+ a : Family type/Product line 0x0 = 0000 = Reserved 0x1 = 0001 = Monoploy non specific (e.g backplane, psu, fans) 0x2 = 0010 = Boardwalk 0x3 = 0011 = Marvin Gardens 0x4 = 0100 = Pacific 0x5 = 0101 = ParkPlace c : Interface / device type: 0x00 = 00000000 = CPU 0x01 = 00000001 = Switch fabric 0x02 = 00000010 = Copper Ethernet 0x03 = 00000011 = Fiber Ethernet 0x04 = 00000100 = Sonet (Packets) 0x05 = 00000101 = ATM 0x06 = 00000110 = Token Ring 0x07 = 00000111 = RMON 0x08 = 00001000 = BFM (Frame or cells indicated by field 'a' above) 0x09 = 00001001 = PSU 0x0a = 00001010 = Fan Tray 0x0b = 00001011 = Chassis/Backplane d : Maximum speed (highest negotiable speed) 0x0 = 0000 = 10 Mbit 0x1 = 0001 = 100 Mbit 0x2 = 0010 = 1 Gbit 0x3 = 0011 = 10 Gbit 0x4 = 0100 = OC-3 0x5 = 0101 = OC-12 0x6 = 0110 = OC-48 0x7 = 0111 = OC-92 0x8 = 1000 = OC-192 0x9 = 1001 = 4 Mbit (TR) 0xa = 1010 = 16 Mbit (TR) 0xb = 1011 = E3 0xc = 1100 = DS1 0xd = 1101 = DS3 0xe = 1110 = none (no PHY interfaces on board) 0xf = 1111 = Max speed indicated implicitly in field (c) (for expansion) e : 0=non-redundant, 1=redundant f : Card specific info. For Gigabit used as follows: 000=short-haul (SX) 010=long-haul (LX) 100=extra-distance (DX) 101=GBIC For ATM/Sonet used as follows 000 = multi mode 001 = single mode 010 = single or multimode 011 = not applicable (e.g., copper has no mode) For Marvin Gardens, indicates number of MDA slots 000 = none 001 = one option slots 010 = two option slots 011 = three option slots For Power Supplies: 000 = AC PSU 001 = DC PSU g : Chassis type 0x0 = 0000 = work-group (single card switches, etc) 0x1 = 0001 = back-bone (chassis based products) 0x2 = 0010 = MDA (option modules) h : Number of ports (binary representation obmited) (for ACIM/BFM cards, this is number of octapids/blackbirds/dea) 0x00 = no ports (cpus, switch fabrics) 0x01 = 1-port, 0x02 = 2-port, 0x04 = 4-port, 0x06 = 6-port, 0x08 = 8-port, 0x0c = 12-port, 0x10 = 16-port, 0x18 = 24-port, 0x22 = 36-port, 0x30 = 48-port, 0x40 = 64-port. " ::= { rc2kCardEntry 2 } rc2kCardFrontDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "description" ::= { rc2kCardEntry 3 } rc2kCardFrontAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to indicate the administrative status of this card" ::= { rc2kCardEntry 4 } rc2kCardFrontOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3), unknown(4), dormant(5) } ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the operational status of this card." ::= { rc2kCardEntry 5 } rc2kCardFrontSerialNum OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "serial number of card" ::= { rc2kCardEntry 6 } rc2kCardFrontHwVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "hardware version" ::= { rc2kCardEntry 7 } rc2kCardFrontPartNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "part number" ::= { rc2kCardEntry 8 } rc2kCardFrontDateCode OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date code" ::= { rc2kCardEntry 9 } rc2kCardFrontDeviations OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "deviations" ::= { rc2kCardEntry 10 } rc2kCardFrontMacAddr OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS obsolete DESCRIPTION "base mac address" ::= { rc2kCardEntry 11 } rc2kCardBackType OBJECT-TYPE SYNTAX INTEGER { other(1), -- no card installed rc2kBackplane(536969472), -- 0010 0000 0000 0001 1000 0001 0000 0000 rc2kSFM(538837248), -- 0010 0000 0001 1111 0000 0001 0000 0000 rc2kBFM0(546177280), -- 0010 0000 1000 1111 0000 0001 0000 0000 rc2kBFM2(546177282), -- 0010 0000 1000 1111 0000 0001 0000 0010 rc2kBFM3(546177283), -- 0010 0000 1000 1111 0000 0001 0000 0011 rc2kBFM6(546177286), -- 0010 0000 1000 1111 0000 0001 0000 0100 rc2kBFM8(546177288), -- 0010 0000 1000 1111 0000 0001 0000 1000 rc2kMGSFM(807272704) -- 0011 0000 0001 1110 0000 0001 0000 0000 } ACCESS read-only STATUS mandatory DESCRIPTION "Refer to rc2kCardFrontType for the encoding scheme" ::= { rc2kCardEntry 12 } rc2kCardBackDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "description" ::= { rc2kCardEntry 13 } rc2kCardBackSerialNum OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "serial number of card" ::= { rc2kCardEntry 14 } rc2kCardBackHwVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "hardware version" ::= { rc2kCardEntry 15 } rc2kCardBackPartNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "part number" ::= { rc2kCardEntry 16 } rc2kCardBackDateCode OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "date code" ::= { rc2kCardEntry 17 } rc2kCardBackDeviations OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "deviations" ::= { rc2kCardEntry 18 } rc2kCardPCMCIAType OBJECT-TYPE SYNTAX INTEGER { none(1), modemCard(2), ethernetCard(3), ataDisk(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate the type of PCMCIA card currently installed in this CPU card, if any. For non-CPU cards, this variable has no meaning and will always be set to none(1)." DEFVAL { none } ::= { rc2kCardEntry 19 } rc2kCardPCMCIADescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) ACCESS read-only STATUS mandatory DESCRIPTION "PCMCIA descriptor" ::= { rc2kCardEntry 20 } rc2kCardASICDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) ACCESS read-only STATUS mandatory DESCRIPTION "ASIC descriptor" ::= { rc2kCardEntry 21 } rc2kCardFrontMasterIO OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "Used to indicate whether an IO card in a 8100 device is operating in the 'master' mode. This variable is not meaningful for non-IO cards and non-8100 devices." DEFVAL { false } ::= { rc2kCardEntry 22 } -- 2k copy file rc2kCopyFile OBJECT IDENTIFIER ::= { rc2k 7 } rc2kCopyFileSource OBJECT-TYPE SYNTAX DisplayString (SIZE(0..256)) ACCESS read-write STATUS mandatory DESCRIPTION "source file" ::= { rc2kCopyFile 1 } rc2kCopyFileDestination OBJECT-TYPE SYNTAX DisplayString (SIZE(0..256)) ACCESS read-write STATUS mandatory DESCRIPTION "dest file" ::= { rc2kCopyFile 2 } rc2kCopyFileAction OBJECT-TYPE SYNTAX INTEGER { none(1), start(2) } ACCESS read-write STATUS mandatory DESCRIPTION "start or cancell" ::= { rc2kCopyFile 3 } rc2kCopyFileResult OBJECT-TYPE SYNTAX INTEGER { none(1), inProgress(2), success(3), fail(4), invalidSource(5), invalidDestination(6), outOfMemory(7), outOfSpace(8), fileNotFound(9) } ACCESS read-only STATUS mandatory DESCRIPTION "result" ::= { rc2kCopyFile 4 } -- 2k Qos rc2kQos OBJECT IDENTIFIER ::= { rc2k 8 } rc2kQosQosTable OBJECT-TYPE SYNTAX SEQUENCE OF Rc2kQosQosEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is used to define the Quality Of Service(QOS) profiles for the system. The system can support eight different QOS levels. Each QOS level can be individually configured." ::= { rc2kQos 1 } rc2kQosQosEntry OBJECT-TYPE SYNTAX Rc2kQosQosEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "QOS profile entry." INDEX { rc2kQosQosRow } ::= { rc2kQosQosTable 1 } Rc2kQosQosEntry ::= SEQUENCE { rc2kQosQosRow INTEGER, rc2kQosQosLevel INTEGER, rc2kQosQosName DisplayString, rc2kQosQosAdminWeight INTEGER, rc2kQosQosOperWeight INTEGER, rc2kQosOctapidMode INTEGER, rc2kQosQosAdminThreshold INTEGER, rc2kQosQosOperThreshold INTEGER } rc2kQosQosRow OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS read-only STATUS mandatory DESCRIPTION "Used to uniquely identify a row in this table." ::= { rc2kQosQosEntry 1 } rc2kQosQosLevel OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-only STATUS mandatory DESCRIPTION "QOS level" ::= { rc2kQosQosEntry 2 } rc2kQosQosName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "Qos level name" ::= { rc2kQosQosEntry 3 } rc2kQosQosAdminWeight OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Administrative transmit opportunity percentage" ::= { rc2kQosQosEntry 4 } rc2kQosQosOperWeight OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Operational transmit opportunity percentage" ::= { rc2kQosQosEntry 5 } rc2kQosOctapidMode OBJECT-TYPE SYNTAX INTEGER { modeSingle(1), mode100(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Octapid mode" ::= { rc2kQosQosEntry 6 } rc2kQosQosAdminThreshold OBJECT-TYPE SYNTAX INTEGER { none(0), oneEight(1), oneQuarter(2), threeEight(3), halfSdram(4), fiveEight(5), threeQuarter(6), sevenEights(7), allSdram(8), notpresent(9) } ACCESS read-write STATUS mandatory DESCRIPTION "Administrative queue threshold" ::= { rc2kQosQosEntry 7 } rc2kQosQosOperThreshold OBJECT-TYPE SYNTAX INTEGER { none(0), oneEight(1), oneQuarter(2), threeEight(3), halfSdram(4), fiveEight(5), threeQuarter(6), sevenEights(7), allSdram(8), notpresent(9) } ACCESS read-only STATUS mandatory DESCRIPTION "Operational queue threshold" ::= { rc2kQosQosEntry 8 } -- 2k Qos Ingress Tag To Qos Table rc2kQosIngressTagToQosTable OBJECT-TYPE SYNTAX SEQUENCE OF Rc2kQosIngressTagToQosEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is used to specify the 802.1P to QOS (802.1P->QOS) mapping on packet ingress." ::= { rc2kQos 2 } rc2kQosIngressTagToQosEntry OBJECT-TYPE SYNTAX Rc2kQosIngressTagToQosEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing infomation of 8021P->Qos mapping" INDEX { rc2kQosIngressTagToQosRow } ::= { rc2kQosIngressTagToQosTable 1 } Rc2kQosIngressTagToQosEntry ::= SEQUENCE { rc2kQosIngressTagToQosRow INTEGER, rc2kQosIngressTagToQosInIeee8021P INTEGER, rc2kQosIngressTagToQosQosLevel INTEGER } rc2kQosIngressTagToQosRow OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS read-only STATUS mandatory DESCRIPTION "Used to uniquely identify a row in this table." ::= { rc2kQosIngressTagToQosEntry 1 } rc2kQosIngressTagToQosInIeee8021P OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-only STATUS mandatory DESCRIPTION "802.1P" ::= { rc2kQosIngressTagToQosEntry 2 } rc2kQosIngressTagToQosQosLevel OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-write STATUS mandatory DESCRIPTION "Qos level" ::= { rc2kQosIngressTagToQosEntry 3 } -- 2k Ingress DsField To Qos Table rc2kQosIngressDsFieldToQosTable OBJECT-TYPE SYNTAX SEQUENCE OF Rc2kQosIngressDsFieldToQosEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is used to specify the DSCP field to QOS (DsField->QOS) mapping on packet ingress." ::= { rc2kQos 3 } rc2kQosIngressDsFieldToQosEntry OBJECT-TYPE SYNTAX Rc2kQosIngressDsFieldToQosEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing infomation of DsField->Qos mapping" INDEX { rc2kQosIngressDsFieldToQosRow } ::= { rc2kQosIngressDsFieldToQosTable 1 } Rc2kQosIngressDsFieldToQosEntry ::= SEQUENCE { rc2kQosIngressDsFieldToQosRow INTEGER, rc2kQosIngressDsFieldToQosInDsField INTEGER, rc2kQosIngressDsFieldToQosQosLevel INTEGER } rc2kQosIngressDsFieldToQosRow OBJECT-TYPE SYNTAX INTEGER (1..64) ACCESS read-only STATUS mandatory DESCRIPTION "Used to uniquely identify a row in this table." ::= { rc2kQosIngressDsFieldToQosEntry 1 } rc2kQosIngressDsFieldToQosInDsField OBJECT-TYPE SYNTAX INTEGER (0..63) ACCESS read-only STATUS mandatory DESCRIPTION "diffserv dsField" ::= { rc2kQosIngressDsFieldToQosEntry 2 } rc2kQosIngressDsFieldToQosQosLevel OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-write STATUS mandatory DESCRIPTION "qos level" ::= { rc2kQosIngressDsFieldToQosEntry 3 } -- 2k Egress Qos To Tag Table rc2kQosEgressQosToTagTable OBJECT-TYPE SYNTAX SEQUENCE OF Rc2kQosEgressQosToTagEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is used to specify the QOS to 802.1P (QOS->802.1P) mapping on packet egress." ::= { rc2kQos 4 } rc2kQosEgressQosToTagEntry OBJECT-TYPE SYNTAX Rc2kQosEgressQosToTagEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing infomation of Qos->Qos mapping" INDEX { rc2kQosEgressQosToTagRow } ::= { rc2kQosEgressQosToTagTable 1 } Rc2kQosEgressQosToTagEntry ::= SEQUENCE { rc2kQosEgressQosToTagRow INTEGER, rc2kQosEgressQosToTagQosLevel INTEGER, rc2kQosEgressQosToTagOutIeee8021P INTEGER } rc2kQosEgressQosToTagRow OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS read-only STATUS mandatory DESCRIPTION "Used to uniquely identify a row in this table." ::= { rc2kQosEgressQosToTagEntry 1 } rc2kQosEgressQosToTagQosLevel OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-only STATUS mandatory DESCRIPTION "qos level" ::= { rc2kQosEgressQosToTagEntry 2 } rc2kQosEgressQosToTagOutIeee8021P OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-write STATUS mandatory DESCRIPTION "802.1P" ::= { rc2kQosEgressQosToTagEntry 3 } -- 2k Egress Qos To DsField Table rc2kQosEgressQosToDsFieldTable OBJECT-TYPE SYNTAX SEQUENCE OF Rc2kQosEgressQosToDsFieldEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is used to specify the QOS to DSCP field (QOS->DsField) mapping on packet egress." ::= { rc2kQos 5 } rc2kQosEgressQosToDsFieldEntry OBJECT-TYPE SYNTAX Rc2kQosEgressQosToDsFieldEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing infomation of Qos->Qos mapping" INDEX { rc2kQosEgressQosToDsFieldRow } ::= { rc2kQosEgressQosToDsFieldTable 1 } Rc2kQosEgressQosToDsFieldEntry ::= SEQUENCE { rc2kQosEgressQosToDsFieldRow INTEGER, rc2kQosEgressQosToDsFieldQosLevel INTEGER, rc2kQosEgressQosToDsFieldOutDsField INTEGER } rc2kQosEgressQosToDsFieldRow OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS read-only STATUS mandatory DESCRIPTION "Used to uniquely identify a row in this table." ::= { rc2kQosEgressQosToDsFieldEntry 1 } rc2kQosEgressQosToDsFieldQosLevel OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-only STATUS mandatory DESCRIPTION "qos level" ::= { rc2kQosEgressQosToDsFieldEntry 2 } rc2kQosEgressQosToDsFieldOutDsField OBJECT-TYPE SYNTAX INTEGER (0..63) ACCESS read-write STATUS mandatory DESCRIPTION "diffserv dsField" ::= { rc2kQosEgressQosToDsFieldEntry 3 } -- 2k Traffic Profile Table rc2kQosTrafficProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF Rc2kQosTrafficProfileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is used to specify traffic profiles for the system. These traffic profiles are used for policying purposes to guarantee streams of traffic do not egress the system above a certain rate. These traffic profiles are applied in the 'rcIpFilterTable'." ::= { rc2kQos 6 } rc2kQosTrafficProfileEntry OBJECT-TYPE SYNTAX Rc2kQosTrafficProfileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing infomation of Qos->Qos mapping" INDEX { rc2kQosTrafficProfileId } ::= { rc2kQosTrafficProfileTable 1 } Rc2kQosTrafficProfileEntry ::= SEQUENCE { rc2kQosTrafficProfileId INTEGER, rc2kQosTrafficProfileName DisplayString, rc2kQosTrafficProfileEnable TruthValue, rc2kQosTrafficProfileTranslateDscpEnable TruthValue, rc2kQosTrafficProfileInProfileDscp DisplayString(SIZE(6)), rc2kQosTrafficProfileOutProfileDscp DisplayString(SIZE(6)), rc2kQosTrafficProfileDiscardEnable TruthValue, rc2kQosTrafficProfileAverageRate INTEGER, rc2kQosTrafficProfilePeakRate INTEGER, rc2kQosTrafficProfileRowStatus RowStatus } rc2kQosTrafficProfileId OBJECT-TYPE SYNTAX INTEGER (1..64) ACCESS read-only STATUS mandatory DESCRIPTION "Profile id" ::= { rc2kQosTrafficProfileEntry 1 } rc2kQosTrafficProfileName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "Profile name" ::= { rc2kQosTrafficProfileEntry 2 } rc2kQosTrafficProfileEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Enable this entry" DEFVAL { false } ::= { rc2kQosTrafficProfileEntry 3 } rc2kQosTrafficProfileTranslateDscpEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to specify whether translation of the DSCP field should be performed. If enabled, the value in the DSCP field for packets that fall within the traffic profile will get translated to 'rc2kQosTrafficProfileInProfileDscp'. Packets that fall outside the traffic profile will get translated to 'rc2kQosTrafficProfileOutProfileDscp'. If disabled, no translation is performed." DEFVAL { false } ::= { rc2kQosTrafficProfileEntry 4 } rc2kQosTrafficProfileInProfileDscp OBJECT-TYPE SYNTAX DisplayString(SIZE(6)) ACCESS read-write STATUS mandatory DESCRIPTION "Used to specify the DSCP value for 'good' packets." ::= { rc2kQosTrafficProfileEntry 5 } rc2kQosTrafficProfileOutProfileDscp OBJECT-TYPE SYNTAX DisplayString(SIZE(6)) ACCESS read-write STATUS mandatory DESCRIPTION "Used to specify the DSCP value for 'violation' packets." ::= { rc2kQosTrafficProfileEntry 6 } rc2kQosTrafficProfileDiscardEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Used to specify whether packets that fall outside the traffic profile should be discarded." DEFVAL { true } ::= { rc2kQosTrafficProfileEntry 7 } rc2kQosTrafficProfileAverageRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Average rate in packets per second." ::= { rc2kQosTrafficProfileEntry 8 } rc2kQosTrafficProfilePeakRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Peak rate in packets per second." ::= { rc2kQosTrafficProfileEntry 9 } rc2kQosTrafficProfileRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Used to create/delete entries." ::= { rc2kQosTrafficProfileEntry 10 } -- 2k Ingress Dscp To Qos Table rc2kQosIngressDscpToQosTable OBJECT-TYPE SYNTAX SEQUENCE OF Rc2kQosIngressDscpToQosEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is used to specify the DSCP to QOS (Dscp->QOS) mapping on packet ingress." ::= { rc2kQos 7 } rc2kQosIngressDscpToQosEntry OBJECT-TYPE SYNTAX Rc2kQosIngressDscpToQosEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing information of Dscp->Qos mapping" INDEX { rc2kQosIngressDscpToQosRow } ::= { rc2kQosIngressDscpToQosTable 1 } Rc2kQosIngressDscpToQosEntry ::= SEQUENCE { rc2kQosIngressDscpToQosRow INTEGER, rc2kQosIngressDscpToQosInDscp INTEGER, rc2kQosIngressDscpToQosInDscpBinaryFormat DisplayString(SIZE(6)), rc2kQosIngressDscpToQosQosLevel INTEGER } rc2kQosIngressDscpToQosRow OBJECT-TYPE SYNTAX INTEGER (1..64) ACCESS read-only STATUS mandatory DESCRIPTION "Used to uniquely identify a row in this table." ::= { rc2kQosIngressDscpToQosEntry 1 } rc2kQosIngressDscpToQosInDscp OBJECT-TYPE SYNTAX INTEGER (0..63) ACCESS read-only STATUS mandatory DESCRIPTION "A 6-bit value used to define the Differentiated Service Code Point(DSCP)." ::= { rc2kQosIngressDscpToQosEntry 2 } rc2kQosIngressDscpToQosInDscpBinaryFormat OBJECT-TYPE SYNTAX DisplayString(SIZE(6)) ACCESS read-only STATUS mandatory DESCRIPTION "The 'rc2kQosIngressDscpToQosInDscp' value shown in a binary format (network order)." ::= { rc2kQosIngressDscpToQosEntry 3 } rc2kQosIngressDscpToQosQosLevel OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-write STATUS mandatory DESCRIPTION "qos level" ::= { rc2kQosIngressDscpToQosEntry 4 } -- 2k Egress Qos To Dscp Table rc2kQosEgressQosToDscpTable OBJECT-TYPE SYNTAX SEQUENCE OF Rc2kQosEgressQosToDscpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is used to specify the QOS to DSCP field (QOS->DsField) mapping on packet egress." ::= { rc2kQos 8 } rc2kQosEgressQosToDscpEntry OBJECT-TYPE SYNTAX Rc2kQosEgressQosToDscpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing infomation of Qos->Qos mapping" INDEX { rc2kQosEgressQosToDscpRow } ::= { rc2kQosEgressQosToDscpTable 1 } Rc2kQosEgressQosToDscpEntry ::= SEQUENCE { rc2kQosEgressQosToDscpRow INTEGER, rc2kQosEgressQosToDscpQosLevel INTEGER, rc2kQosEgressQosToDscpOutDscp INTEGER, rc2kQosEgressQosToDscpOutDscpBinaryFormat DisplayString(SIZE(6)) } rc2kQosEgressQosToDscpRow OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS read-only STATUS mandatory DESCRIPTION "Used to uniquely identify a row in this table." ::= { rc2kQosEgressQosToDscpEntry 1 } rc2kQosEgressQosToDscpQosLevel OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-only STATUS mandatory DESCRIPTION "qos level" ::= { rc2kQosEgressQosToDscpEntry 2 } rc2kQosEgressQosToDscpOutDscp OBJECT-TYPE SYNTAX INTEGER (0..63) ACCESS read-write STATUS mandatory DESCRIPTION "A 6-bit value used to define the Differentiated Service Code Point(DSCP)." ::= { rc2kQosEgressQosToDscpEntry 3 } rc2kQosEgressQosToDscpOutDscpBinaryFormat OBJECT-TYPE SYNTAX DisplayString(SIZE(6)) ACCESS read-only STATUS mandatory DESCRIPTION "The 'rc2kQosEgressQosToDscpOutDscp' value show in a binary format (network order)." ::= { rc2kQosEgressQosToDscpEntry 4 } -- rc2kAtm Group rc2kAtm OBJECT IDENTIFIER ::= { rc2k 9 } rc2kAtmGlobal OBJECT IDENTIFIER ::= { rc2kAtm 1 } -- Atm Port Table rc2kAtmPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Rc2kAtmPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "ATM port table" ::= { rc2kAtm 2 } rc2kAtmPortEntry OBJECT-TYPE SYNTAX Rc2kAtmPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing infomation of ATM port" INDEX { rc2kAtmPortIfIndex } ::= { rc2kAtmPortTable 1 } Rc2kAtmPortEntry ::= SEQUENCE { rc2kAtmPortIfIndex InterfaceIndex, rc2kAtmPortNumVpiBits INTEGER, rc2kAtmPortNumVciBits INTEGER, rc2kAtmPortMediaType INTEGER, rc2kAtmPortScrambleEnable TruthValue, rc2kAtmPortFramingMode INTEGER, rc2kAtmPortClockSource INTEGER, rc2kAtmPortLineSpeed INTEGER, rc2kAtmPortLoopBackMode INTEGER, rc2kAtmPortMacAddress MacAddress } rc2kAtmPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "port number" ::= { rc2kAtmPortEntry 1 } rc2kAtmPortNumVpiBits OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS read-write STATUS mandatory DESCRIPTION "# of vpi bits. For OC3, the max number of vpibits is 6. However, for OC12, it is 8. Both media types share the same MIB object. " ::= { rc2kAtmPortEntry 2 } rc2kAtmPortNumVciBits OBJECT-TYPE SYNTAX INTEGER (1..16) ACCESS read-write STATUS mandatory DESCRIPTION "# of vci bits" ::= { rc2kAtmPortEntry 3 } rc2kAtmPortMediaType OBJECT-TYPE SYNTAX INTEGER { smf(1), -- single mode fiber mmf(2) -- mixed mode fiber } ACCESS read-only STATUS mandatory DESCRIPTION "media type" ::= { rc2kAtmPortEntry 4 } rc2kAtmPortScrambleEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "enable scramble" DEFVAL { false } ::= { rc2kAtmPortEntry 5 } rc2kAtmPortFramingMode OBJECT-TYPE SYNTAX INTEGER { sonet(1), sdh(2) } ACCESS read-write STATUS mandatory DESCRIPTION "port framing mode" DEFVAL { sonet } ::= { rc2kAtmPortEntry 6 } rc2kAtmPortClockSource OBJECT-TYPE SYNTAX INTEGER { loopTimed(1), freeRunning(2) } ACCESS read-write STATUS mandatory DESCRIPTION "clock source" ::= { rc2kAtmPortEntry 7 } rc2kAtmPortLineSpeed OBJECT-TYPE SYNTAX INTEGER { oc3c(1), oc12c(2) } ACCESS read-only STATUS mandatory DESCRIPTION "line speed" ::= { rc2kAtmPortEntry 8 } rc2kAtmPortLoopBackMode OBJECT-TYPE SYNTAX INTEGER { off(1), internal(2), external(3) } ACCESS read-write STATUS mandatory DESCRIPTION "loop back mode" DEFVAL { off } ::= { rc2kAtmPortEntry 9 } rc2kAtmPortMacAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "XLR assigned MAC addr" ::= { rc2kAtmPortEntry 10 } -- Atm Pvc Table rc2kAtmPvcTable OBJECT-TYPE SYNTAX SEQUENCE OF Rc2kAtmPvcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "ATM Pvc table" ::= { rc2kAtm 3 } rc2kAtmPvcEntry OBJECT-TYPE SYNTAX Rc2kAtmPvcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing infomation of ATM Pvc" INDEX { rc2kAtmPvcIfIndex, rc2kAtmPvcVpi, rc2kAtmPvcVci } ::= { rc2kAtmPvcTable 1 } Rc2kAtmPvcEntry ::= SEQUENCE { rc2kAtmPvcIfIndex InterfaceIndex, rc2kAtmPvcVpi INTEGER, rc2kAtmPvcVci INTEGER, rc2kAtmPvcPvcId INTEGER, rc2kAtmPvcName DisplayString, rc2kAtmPvcEncapsulation INTEGER, rc2kAtmPvcServiceType INTEGER, rc2kAtmPvcPeakCellRate INTEGER, rc2kAtmPvcSustainedCellRate INTEGER, rc2kAtmPvcMaxBurstSize INTEGER, rc2kAtmPvcRowStatus RowStatus, rc2kAtmPvcOamLbMgmtEnable TruthValue, rc2kAtmPvcOamLbSendFrequency INTEGER, rc2kAtmPvcOamLbRetryFrequency INTEGER, rc2kAtmPvcOamLbUpCount INTEGER, rc2kAtmPvcOamLbDownCount INTEGER, rc2kAtmPvcOamTrapEnable TruthValue, rc2kAtmPvcOamVcStatus INTEGER, rc2kAtmPvcOamLbRequestSent Counter, rc2kAtmPvcOamLbReplySent Counter, rc2kAtmPvcOamLbReplyReceived Counter } rc2kAtmPvcIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "port number" ::= { rc2kAtmPvcEntry 1 } rc2kAtmPvcVpi OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "vpi of this pvc" ::= { rc2kAtmPvcEntry 2 } rc2kAtmPvcVci OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "vci of this pvc" ::= { rc2kAtmPvcEntry 3 } rc2kAtmPvcPvcId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "internal pvc id" ::= { rc2kAtmPvcEntry 4 } rc2kAtmPvcName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "name of pvc" ::= { rc2kAtmPvcEntry 5 } rc2kAtmPvcEncapsulation OBJECT-TYPE SYNTAX INTEGER { null(1), llcSnap(2) } ACCESS read-write STATUS mandatory DESCRIPTION "encapsulation" DEFVAL { llcSnap } ::= { rc2kAtmPvcEntry 6 } rc2kAtmPvcServiceType OBJECT-TYPE SYNTAX INTEGER { ubr(1), vbr(2) } ACCESS read-write STATUS mandatory DESCRIPTION "service type" DEFVAL { ubr } ::= { rc2kAtmPvcEntry 7 } rc2kAtmPvcPeakCellRate OBJECT-TYPE SYNTAX INTEGER (86..733490) ACCESS read-write STATUS mandatory DESCRIPTION "Peak cell rate in cells per second. The maximum peak cell rate is half of the line rate. The peak cell rate for MDA type OC12 must be less than 733491. However, for OC3, it is less than 182783." DEFVAL { 23584 } ::= { rc2kAtmPvcEntry 8 } rc2kAtmPvcSustainedCellRate OBJECT-TYPE SYNTAX INTEGER (86..733490) ACCESS read-write STATUS mandatory DESCRIPTION "Sustained cell rate in cells per second. The maximum peak cell rate is half of the line rate. The peak cell rate for MDA type OC12 must be less than 733491. However, for OC3, it is less than 182783." DEFVAL { 23584 } ::= { rc2kAtmPvcEntry 9 } rc2kAtmPvcMaxBurstSize OBJECT-TYPE SYNTAX INTEGER (2..255) ACCESS read-write STATUS mandatory DESCRIPTION "max burst size" DEFVAL { 255 } ::= { rc2kAtmPvcEntry 10 } rc2kAtmPvcRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "row status" ::= { rc2kAtmPvcEntry 11 } rc2kAtmPvcOamLbMgmtEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Indicate whether end-to-end F5 OAM loopback is enabled. When it is enabled, OAM loopback request is sent periodically" DEFVAL { false } ::= { rc2kAtmPvcEntry 12 } rc2kAtmPvcOamLbSendFrequency OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "Number of seconds between transmitting OAM loopback request" DEFVAL { 5 } ::= { rc2kAtmPvcEntry 13 } rc2kAtmPvcOamLbRetryFrequency OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "Number of seconds between retry" DEFVAL { 1 } ::= { rc2kAtmPvcEntry 14 } rc2kAtmPvcOamLbUpCount OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "Number of consecutive end-to-end F5 OAM loopback cell responses that must be received in order to change a PVC connection state to up" DEFVAL { 3 } ::= { rc2kAtmPvcEntry 15 } rc2kAtmPvcOamLbDownCount OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "Number of consecutive end-to-end F5 OAM loopback cell responses that are not received in order to change a PVC state to down." DEFVAL { 5 } ::= { rc2kAtmPvcEntry 16 } rc2kAtmPvcOamTrapEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Indicate whether OAM trap is enabled. When it is enabled, a trap is sent to the management station when rc2kAtmPvcOamVcStatus is going up or down." DEFVAL { false } ::= { rc2kAtmPvcEntry 17 } rc2kAtmPvcOamVcStatus OBJECT-TYPE SYNTAX INTEGER { notManaged(1), downVerify(2), down(3), upVerify(4), up(5) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicate the status of PVC link. Not Managed--VC is not being managed by OAM. Down Verify --An OAM loopback failed. End-to-end F5 OAM loopback cells are sent at retry frequency to verify the VC is really down. After down-count unsuccessful retries, the VC goes to the down state (see definition of rc2kAtmPvcOamLoopbackDownCount). Down --VC has not received responses to by end-to-end F5 OAM loopback cells. Up Verify -- An OAM loopback was successful. End-to-end F5 OAM loopback cells are sent at retry frequency to verify the VC is really up. After up-count successive and successful loopback retries, the VC goes to the Up state (see definition of rc2kAtmPvcOamLoopbackUpCount). Up - End-to-end loopbacks are successful. " ::= { rc2kAtmPvcEntry 18 } rc2kAtmPvcOamLbRequestSent OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of OAM loopback request sent" ::= { rc2kAtmPvcEntry 19 } rc2kAtmPvcOamLbReplySent OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of OAM loopback reply sent" ::= { rc2kAtmPvcEntry 20 } rc2kAtmPvcOamLbReplyReceived OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of OAM loopback reply received" ::= { rc2kAtmPvcEntry 21 } -- Atm 1483Elan Table rc2kAtm1483ElanTable OBJECT-TYPE SYNTAX SEQUENCE OF Rc2kAtm1483ElanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "ATM 1483Elan table" ::= { rc2kAtm 5 } rc2kAtm1483ElanEntry OBJECT-TYPE SYNTAX Rc2kAtm1483ElanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing infomation of ATM 1483Elan" INDEX { rc2kAtm1483ElanIfIndex, rc2kAtm1483ElanVlanId } ::= { rc2kAtm1483ElanTable 1 } Rc2kAtm1483ElanEntry ::= SEQUENCE { rc2kAtm1483ElanIfIndex InterfaceIndex, rc2kAtm1483ElanElanId INTEGER, rc2kAtm1483ElanNumPvcIds INTEGER, rc2kAtm1483ElanPvcIds IdList, rc2kAtm1483ElanVlanId INTEGER, rc2kAtm1483ElanRowStatus RowStatus, rc2kAtm1483ElanConnectType INTEGER, rc2kAtm1483ElanVlanMacAddress MacAddress, rc2kAtm1483ElanDummyMacAddress MacAddress, rc2kAtm1483ElanLocalIpAddress IpAddress, rc2kAtm1483ElanRemoteIpAddress IpAddress, rc2kAtm1483ElanInArpSendEnable TruthValue, rc2kAtm1483ElanInArpSendInterval INTEGER, rc2kAtm1483ElanIpxVlanEncapMethod INTEGER, rc2kAtm1483ElanIpxNetworkNum INTEGER, rc2kAtm1483ElanStgId INTEGER, rc2kAtm1483ElanrcStgTaggedBpduVlanId INTEGER } rc2kAtm1483ElanIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "port number" ::= { rc2kAtm1483ElanEntry 1 } rc2kAtm1483ElanElanId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Elan Id" ::= { rc2kAtm1483ElanEntry 2 } rc2kAtm1483ElanNumPvcIds OBJECT-TYPE SYNTAX INTEGER (0..64) ACCESS read-only STATUS mandatory DESCRIPTION "# pvc-ids in list" ::= { rc2kAtm1483ElanEntry 3 } rc2kAtm1483ElanPvcIds OBJECT-TYPE SYNTAX IdList (SIZE (256)) ACCESS read-write STATUS mandatory DESCRIPTION "list of pvc-ids. each pvc-id is represented by a 32 bit value this field can contain a maximum of 64 pvc-ids." ::= { rc2kAtm1483ElanEntry 4 } rc2kAtm1483ElanVlanId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "vlan tag for this 1483" ::= { rc2kAtm1483ElanEntry 5 } rc2kAtm1483ElanRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "row status" ::= { rc2kAtm1483ElanEntry 6 } rc2kAtm1483ElanConnectType OBJECT-TYPE SYNTAX INTEGER { bridged(1), ip(2), ipx(3) } ACCESS read-write STATUS mandatory DESCRIPTION "connection type" ::= { rc2kAtm1483ElanEntry 7 } rc2kAtm1483ElanVlanMacAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "mac for vlan" ::= { rc2kAtm1483ElanEntry 8 } rc2kAtm1483ElanDummyMacAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "dummy mac for the other router" ::= { rc2kAtm1483ElanEntry 9 } rc2kAtm1483ElanLocalIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "local ip, if ConnectType is ip(2)" ::= { rc2kAtm1483ElanEntry 10 } rc2kAtm1483ElanRemoteIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "remote ip, if ConnectType is ip(2)" ::= { rc2kAtm1483ElanEntry 11 } rc2kAtm1483ElanInArpSendEnable OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "enable arp sending on the port, if ConnectType is ip(2)" DEFVAL { false } ::= { rc2kAtm1483ElanEntry 12 } rc2kAtm1483ElanInArpSendInterval OBJECT-TYPE SYNTAX INTEGER (0..60) ACCESS read-write STATUS mandatory DESCRIPTION "interval of arp sending on the port, if ConnectType is ip(2)" ::= { rc2kAtm1483ElanEntry 13 } rc2kAtm1483ElanIpxVlanEncapMethod OBJECT-TYPE SYNTAX INTEGER { llc(1), snap(2), ether-ii(3), raw(4) } ACCESS read-write STATUS mandatory DESCRIPTION "vlan encapsulation method, if ConnectType is ipx(3)" ::= { rc2kAtm1483ElanEntry 14 } rc2kAtm1483ElanIpxNetworkNum OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "network number, if ConnectType is ipx(3)" ::= { rc2kAtm1483ElanEntry 15 } rc2kAtm1483ElanStgId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An identifier used to identify a STG in the device, only in bridge mode" ::= { rc2kAtm1483ElanEntry 16 } rc2kAtm1483ElanrcStgTaggedBpduVlanId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The VLAN ID to be used for tagging BPDUs, only in bridge mode." ::= { rc2kAtm1483ElanEntry 17 } -- 2kAtm Sio Card Config Table rc2kAtmSioCardConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Rc2kAtmSioCardConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "2kAtm Sio Card Config Table" ::= { rc2kAtm 8 } rc2kAtmSioCardConfigEntry OBJECT-TYPE SYNTAX Rc2kAtmSioCardConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing infomation of 2kAtm Sio Card Config." INDEX { rc2kAtmSioCardConfigSlotIndex } ::= { rc2kAtmSioCardConfigTable 1 } Rc2kAtmSioCardConfigEntry ::= SEQUENCE { rc2kAtmSioCardConfigSlotIndex INTEGER, rc2kAtmSioCardConfigAction INTEGER, rc2kAtmSioCardConfigTraceMode INTEGER, rc2kAtmSioCardConfigImageFileName DisplayString } rc2kAtmSioCardConfigSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "slot Index." ::= { rc2kAtmSioCardConfigEntry 1 } rc2kAtmSioCardConfigAction OBJECT-TYPE SYNTAX INTEGER { other(0), reset(1) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rc2kAtmSioCardConfigEntry 2 } rc2kAtmSioCardConfigTraceMode OBJECT-TYPE SYNTAX INTEGER { other(0), traceOn(1) } ACCESS read-write STATUS mandatory DESCRIPTION "" ::= { rc2kAtmSioCardConfigEntry 3 } rc2kAtmSioCardConfigImageFileName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "ATM Image file name." ::= { rc2kAtmSioCardConfigEntry 4 } -- 2k Mda rc2kMdaCardTable OBJECT-TYPE SYNTAX SEQUENCE OF Rc2kMdaCardEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Mda card table" ::= { rc2k 10 } rc2kMdaCardEntry OBJECT-TYPE SYNTAX Rc2kMdaCardEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing infomation of Mda card" INDEX { rc2kMdaCardSlotNum, rc2kMdaCardMdaNum } ::= { rc2kMdaCardTable 1 } Rc2kMdaCardEntry ::= SEQUENCE { rc2kMdaCardSlotNum INTEGER, rc2kMdaCardMdaNum INTEGER, rc2kMdaCardType INTEGER, rc2kMdaCardDescription DisplayString, rc2kMdaCardAdminStatus INTEGER, rc2kMdaCardOperStatus INTEGER, rc2kMdaCardSerialNum DisplayString, rc2kMdaCardHwVersion DisplayString, rc2kMdaCardPartNumber DisplayString, rc2kMdaCardDateCode DisplayString, rc2kMdaCardDeviations DisplayString, rc2kMdaCardMacAddr MacAddress, rc2kMdaCardNumPorts INTEGER, rc2kMdaCardFirstIfIndex InterfaceIndex, rc2kMdaCardLastIfIndex InterfaceIndex } rc2kMdaCardSlotNum OBJECT-TYPE SYNTAX INTEGER (1..10) ACCESS read-only STATUS mandatory DESCRIPTION "Slot number" ::= { rc2kMdaCardEntry 1 } rc2kMdaCardMdaNum OBJECT-TYPE SYNTAX INTEGER (1..4) ACCESS read-only STATUS mandatory DESCRIPTION "MDA number within slot. MDAs are numbered from left to right." ::= { rc2kMdaCardEntry 2 } rc2kMdaCardType OBJECT-TYPE SYNTAX INTEGER { other(1), -- no card installed rc2k4x100BaseTX(807469572), -- 0011 0000 0010 0001 0000 0010 0000 0100 rc2k2x100BaseFX(808518146), -- 0011 0000 0011 0001 0000 0010 0000 0010 rc2k4x100BaseFX(808518148), -- 0011 0000 0011 0001 0000 0010 0000 0100 rc2k1x1000BaseSXBB(808583681), -- 0011 0000 0011 0010 0000 0010 0000 0001 rc2k1x1000BaseSXRBB(808616449), -- 0011 0000 0011 0010 1000 0010 0000 0001 rc2k1x1000BaseLXBB(808591873), -- 0011 0000 0011 0010 0010 0010 0000 0001 rc2k1x1000BaseLXRBB(808624641), -- 0011 0000 0011 0010 1010 0010 0000 0001 rc2k4xOc3cBaseSM(542380548), -- 0010 0000 0101 0100 0001 0010 0000 0100 rc2k4xOc3cBaseMM(542376452), -- 0010 0000 0101 0100 0000 0010 0000 0100 rc2k4xOc3cBaseCOPPER(542388740), -- 0010 0000 0101 0100 0011 0010 0000 0100 rc2k1x0c12cBaseSM(542446081), -- 0010 0000 0101 0101 0001 0010 0000 0001 rc2k1x0c12cBaseMM(542441985), -- 0010 0000 0101 0101 0000 0010 0000 0001 rc2k2xDs3(542970370), -- 0010 0000 0101 1101 0001 0010 0000 0010 rc2k2xE3(542839298), -- 0010 0000 0101 1011 0001 0010 0000 0010 rc2k2xOc3PosBaseMMF(541327874), -- 0010 0000 0100 0100 0000 0010 0000 0010 rc2k2xOc3PosBaseSMF(541331970), -- 0010 0000 0100 0100 0001 0010 0000 0010 rc2k1xOc12PosBaseMMF(541393409), -- 0010 0000 0100 0101 0000 0010 0000 0001 rc2k1xOc12PosBaseSMF(541397505) -- 0010 0000 0100 0101 0001 0010 0000 0001 } ACCESS read-only STATUS mandatory DESCRIPTION "Refer to rc2kCardFrontType for the encoding scheme" ::= { rc2kMdaCardEntry 3 } rc2kMdaCardDescription OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "description of mda card" ::= { rc2kMdaCardEntry 4 } rc2kMdaCardAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(0), down(1), testing(2), unknown(3) } ACCESS read-write STATUS mandatory DESCRIPTION "administration status of mda card" ::= { rc2kMdaCardEntry 5 } rc2kMdaCardOperStatus OBJECT-TYPE SYNTAX INTEGER { up(0), down(1), testing(2), unknown(3) } ACCESS read-only STATUS mandatory DESCRIPTION "operation status of mda card." ::= { rc2kMdaCardEntry 6 } rc2kMdaCardSerialNum OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "serial number of mad card" ::= { rc2kMdaCardEntry 7 } rc2kMdaCardHwVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "hardware version of mda card" ::= { rc2kMdaCardEntry 8 } rc2kMdaCardPartNumber OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "part number of mda card" ::= { rc2kMdaCardEntry 9 } rc2kMdaCardDateCode OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "date code of mda card" ::= { rc2kMdaCardEntry 10 } rc2kMdaCardDeviations OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "hardware deviation infomation of mda card" ::= { rc2kMdaCardEntry 11 } rc2kMdaCardMacAddr OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "base mac address of mda card" ::= { rc2kMdaCardEntry 12 } rc2kMdaCardNumPorts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of ports on mda card" ::= { rc2kMdaCardEntry 13 } rc2kMdaCardFirstIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "first ifindex number on mda card" ::= { rc2kMdaCardEntry 14 } rc2kMdaCardLastIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-only STATUS mandatory DESCRIPTION "last ifindex number on mda card" ::= { rc2kMdaCardEntry 15 } -- 2k CPU Ethernet Port Route table rc2kCpuEthernetPortRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF Rc2kCpuEthernetPortRouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "2k CPU Ethernet Port Route table" ::= { rc2k 11 } rc2kCpuEthernetPortRouteEntry OBJECT-TYPE SYNTAX Rc2kCpuEthernetPortRouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry containing infomation of 2k CPU Ethernet Port" INDEX { rc2kCpuEthernetPortRouteNetwork, rc2kCpuEthernetPortRouteGateway} ::= { rc2kCpuEthernetPortRouteTable 1 } Rc2kCpuEthernetPortRouteEntry ::= SEQUENCE { rc2kCpuEthernetPortRouteNetwork IpAddress, rc2kCpuEthernetPortRouteGateway IpAddress, rc2kCpuEthernetPortRouteRowStatus RowStatus } rc2kCpuEthernetPortRouteNetwork OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Used to configure the network that can be used to remotely manage this device." ::= { rc2kCpuEthernetPortRouteEntry 1 } rc2kCpuEthernetPortRouteGateway OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Used to configure the the IP address of the gateway that should be used to forward IP traffic." ::= { rc2kCpuEthernetPortRouteEntry 2 } rc2kCpuEthernetPortRouteRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "row status" ::= { rc2kCpuEthernetPortRouteEntry 3 } END